Zenoah

CNC Alloy High Profile Throttle Arm For Walbro Carb & Choke

CNC Alloy High Profile Throttle Arm For Walbro Carb & Choke

CNC Alloy High Profile Throttle Arm For Walbro Carb & Choke, fits Zenoah, DLE, and others

see drawing for sizes.

Arm length: 25mm

Diameter : 9.5mm

Inner Hole  diameter 4.5mm

Arm Height : 18.6mm

Made from CNC alu

€9.00


€7.44 Ex VAT
Quantity
CNC Alloy low Profile Throttle Arm For Walbro Carb & Choke

CNC Alloy low Profile Throttle Arm For Walbro Carb & Choke

CNC Alloy Low Profile Throttle Arm For Walbro Carb & Choke, fits Zenoah, DLE, and others

see drawing for sizes.

Arm length: 25mm

Holes distance from center- 13 and 15mm

Diameter : 9.5mm

Inner Hole  diameter 5mm

Arm Height : 10mm

Made from CNC alu

€9.00


€7.44 Ex VAT
Quantity
CNC Aluminum Alloy 4.76mm Carburetor Throttle Rocket Arm for Gasoline engine, zenoah, dle

CNC Aluminum Alloy 4.76mm Carburetor Throttle Rocket Arm for Gasoline engine, zenoah, dle

CNC Alloy High Profile Throttle Arm For Walbro Carb & Choke, fits Zenoah, DLE, and others

see drawing for sizes.

Length: 26mm

Width: 8mm

The 4.76mm suitable for the 257, 929, 813, 998, 1052, 771 carburetors

Made from CNC alu

€9.00


€7.44 Ex VAT
Quantity
CNC Aluminum Alloy 4mm Carburetor Throttle Rocket Arm for Gasoline engine, zenoah, dle

CNC Aluminum Alloy 4mm Carburetor Throttle Rocket Arm for Gasoline engine, zenoah, dle

CNC Alloy High Profile Throttle Arm For Walbro Carb & Choke, fits Zenoah, DLE, and others

see drawing for sizes.

Length: 26mm

Width: 8mm

The 4mm size suitable for the 644, 1048 carburetor

Made from CNC alu

€9.00


€7.44 Ex VAT
Quantity
Modified Zenoah Titan ZG 270 RC Gasoline Engine 25.4 ccm - best for Helicopters

Modified Zenoah Titan ZG 270 RC Gasoline Engine 25.4 ccm - best for Helicopters

This is a modified Zenoah engine, the piston-and cylinder are hand picked, and balanced crank and wheel.

this is a very good option for less vibrating engine

Technical Data:

    • Cylinder displacement: 25.4 cm³ / 1.55 cu.inch
    • Cylinder bore: 34 mm / 1.34 inch
    • Cylinder stroke: 28 mm / 1.1 inch
    • Power output: 2,49PS / 1.86 kW at12.000 RPM
    • Drehmoment: 1,63NM bei 9.000 RPM
    • Carburettor: WT-990
    • Venture: 12,7mm (Diameter)
    • Spark plug: NGK CMR7H
    • Spark plug gap: 0,65mm
    • Ignition system: Transistor charger ignition (TCI with BTC 30° / 8000 URPM)
    • Start system: Seilzugstarte
    • Effective Compression Ratio: 8,9
    • Recomended Fuel: 25 Parts gasoline / 1 Part Oil
    • Clutch: 2 Shoes
    • Clutch Engagement at ca. 6.000 RPM
    • Idling Speed: ca. 4000 RPM
    • No load max. Speed: ca. 19.500 RPM
    • Fuel Consumption: ca. 653g/kw h
    • Overall dimensions (LxWxH): 166 x 205 x 196mm
    • Weight ca: 2,07 kg / 4.63 lbs

Delivered without clutch and accessories !

€380.00


€314.05 Ex VAT
Zenoah BH hanson Modified 300 RC 3D Max Helicopter gasser Engine fits Whiplash and others

Zenoah BH hanson Modified 300 RC 3D Max Helicopter gasser Engine fits Whiplash and others

BH Hanson most powerful RC Heli engine.This is a Modified engine by Hanson.

The engine is very well balanced to minimize vibrations and is tuned to adjust power, torque and rpm perfectly for the Whiplash-G II. It runs very smooth

30.5 cc using Zenoah 36mm modified cylinder, 2mm stroker crank, pump bulb 990 carburetor, trued and balanced crankshaft and flywheel for smooth running ,transfer port modifications, lightened piston, metal isolator block, air filter, and muffler. very smooth and very powerful operation up to 12,800 engine speed.

Perfect for heavy lifting or gear up for higher head speed

€729.00


€602.48 Ex VAT
Quantity
Zenoah Titan ZG 240 RC Gasoline Engine 23 ccm

Zenoah Titan ZG 240 RC Gasoline Engine 23 ccm

Already since years the Zenoah Engines are the non plus ultra if people are talking about powerful and reliable engines. Especially in competition use they are well known.

Technical Data:

  • Cylinder displacement: 22.5 cm³ / 1.37 cu.inch
  • Cylinder bore: 32 mm / 1.26 inch
  • Cylinder stroke: 28 mm / 1.1 inch
  • Power output: 2,46PS / 1.81 kW at12.000 RPM
  • Drehmoment: 1,58NM bei 9.000 RPM
  • Carburettor: WT-990
  • Venture: 12,7mm (Diameter)
  • Spark plug: NGK CMR7H
  • Spark plug gap: 0,65mm
  • Ignition system: Transistor charger ignition (TCI with BTC 30° / 8000 URPM)
  • Start system: Seilzugstarte
  • Effective Compression Ratio: 8,9
  • Recomended Fuel: 25 Parts gasoline / 1 Part Oil
  • Clutch: 2 Shoes
  • Clutch Engagement at ca. 6.000 RPM
  • Idling Speed: ca. 4000 RPM
  • No load max. Speed: ca. 19.500 RPM
  • Fuel Consumption: ca. 616g/kw h
  • Overall dimensions (LxWxH): 166 x 205 x 196mm
  • Weight ca: 2,07 kg / 4.63 lbs

Scope of supply:

  • Walbro 990 Carburetor
  • Airfilter
  • Silencer / Muffler
  • Service & Small Parts Accessories bag
  • Clutch System from Zenoah incl. Clutch Shoe Arm
  • Clutch Housing

€289.00


€238.84 Ex VAT
Quantity
Zenoah Titan ZG 26SLH Helicopter Engine 26 ccm

Zenoah Titan ZG 26SLH Helicopter Engine 26 ccm

New cylinder for considerably more power and efficient cooling.

Very thin piston ring for minimal friction and maximum power.

Magneto-electronic ignition with separate power coil and ignition coil, giving maximum power and smooth running.

Small Champion spark plug RZ7C with 10 mm thread.

Compact die cast crankcase.

Double counterbalanced crankshaft, very accurately aligned for the necessary concentric running, supported in three ballbearings. Needle roller bearings in conrod.

Walbro carburetor fitted with a priming pump to fill the carburetor for starting and a efficient airfilter intake silencer with integrated choke flap.

Robust pullcord starter

The new cylinder with the very thin high performance single piston ring is adapted from the extremely high power G230RC car engine for helicopter use. This new cylinder has four retaining screws as apposed to two for the G230RC cylinder. The extremely wide cooling fins are invaluable for helicopter use.

Other components are also optimized for helicopters, for example the crankshaft is very accurately aligned for the necessary concentric running. There is a very robust pullcord starter as well as very efficient airfilter intake silencer fitted to this engine. The carburetor is fitted with small priming pump to fill the carburetor for starting.

The Walbro carburettor is extremely reliable, is designed for the higher rpm involved, the completely dependable magneto ignition without contact breaker, the clean running due to low dilution full synthetic oil resulting in the absence of the smelly smoke trail, the availability of the fuel at every filling station with it’s very low price. These are some of the arguments resulting in the popularity of first the ZG 22 and then the ZG 23SLH, are now exactly relevant to the ZG 26SLH.

Specifications

  • Capacity: 25,4 ccm
  • Bore: 34 mm
  • Stroke: 28 mm
  • Compression ratio: 8.8 eff.
  • Power: 2.2 hp/1.62 kW
  • Torque: 1,48 Nm
  • Power with tuned pipe: >3.0 hp/>2.2 kW
  • Weight: 1580 g without muffler
  • Fuel: 1:40 BEL RAY H1-R / Petrol

€349.00


€288.43 Ex VAT
Quantity
Zenoah Titan ZG 270 RC Gasoline Engine 25.4 ccm

Zenoah Titan ZG 270 RC Gasoline Engine 25.4 ccm

Already since years the Zenoah Engines are the non plus ultra if people are talking about powerful and reliable engines. Especially in competition use they are well known.

Technical Data:

    • Cylinder displacement: 25.4 cm³ / 1.55 cu.inch
    • Cylinder bore: 34 mm / 1.34 inch
    • Cylinder stroke: 28 mm / 1.1 inch
    • Power output: 2,49PS / 1.86 kW at12.000 RPM
    • Drehmoment: 1,63NM bei 9.000 RPM
    • Carburettor: WT-990
    • Venture: 12,7mm (Diameter)
    • Spark plug: NGK CMR7H
    • Spark plug gap: 0,65mm
    • Ignition system: Transistor charger ignition (TCI with BTC 30° / 8000 URPM)
    • Start system: Seilzugstarte
    • Effective Compression Ratio: 8,9
    • Recomended Fuel: 25 Parts gasoline / 1 Part Oil
    • Clutch: 2 Shoes
    • Clutch Engagement at ca. 6.000 RPM
    • Idling Speed: ca. 4000 RPM
    • No load max. Speed: ca. 19.500 RPM
    • Fuel Consumption: ca. 653g/kw h
    • Overall dimensions (LxWxH): 166 x 205 x 196mm
    • Weight ca: 2,07 kg / 4.63 lbs

Scope of supply:

  • Walbro 990 Carburetor
  • Airfilter
  • Silencer / Muffler
  • Service & Small Parts Accessories bag
  • Clutch System from Zenoah incl. Clutch Shoe Arm

€299.00


€247.11 Ex VAT
Quantity