X-NOVA

Xnova 1.5Y  4025-1120KV Brushless Motor w/6mm Shaft

Xnova 1.5Y 4025-1120KV Brushless Motor w/6mm Shaft

This is the Xnova4025-1120KV 1.5Y Brushless Motor with a 6mm "Type A" 36mm Shaft.
This high performance brushless motor was developed 520-600mm size helicopters when powered with 6S.

The choice for hard 3D flying.Best power to weight setup. High qual. Neodym Mag.heat res. up to 150 degree C.
Specialized wires,heat resistance up to 250 degree C.
Precise balanced.
High performance stator metal sheet.
Optimized ventilation.
High quality NMB bearings.
Marked leading high effiency up to 92%.
Superb quality and machining of CNC parts.

Specifications:

  • Slots & Poles: 24n8p
  • Winding T: 1.5Y
  • rpm/V: 1120
  • Volt (V): 10 | 20 | 25
  • Io(A): 2.7 | 3.2 | 3.6
  • Rm (mohm): 7.3
  • Weight (without connector): 384g
  • Body Length (no shaft): 55.75mm
  • Diameter: 49.5mm
  • Shaft Length: 36mm
  • Shaft Diameter: 6mm
  • Max Continuous Power (Watts): 3000
  • Peak Continuous Power (Watts) (5 sec): 4000
  • Max cont. current (A): 110

€229.00


€189.26 Ex VAT
Quantity
Xnova 2204-2600 prop adaptor

Xnova 2204-2600 prop adaptor

Xnova  2204-2600 prop adaptor replacement set

€5.00


€4.13 Ex VAT
Quantity
Xnova Brushless Multicopter Motor 4808-700KV 3-4s

Xnova Brushless Multicopter Motor 4808-700KV 3-4s

High performance and finest CNC quality
Ultimate efficiency
Low cogging torque and smooth running
Precise balanced and fully tested

 Features:

  • Muticopter with 10" to 16" Prop size.
  • 4S to 6S Lipo Cells
  • High performance and finest CNC quality
  • Ultimate efficiency
  • Low cogging torque and smooth running
  • Precise balanced and fully tested
  • Motor size- see images
  • Weight 100Gr


€79.00

€59.00


€48.76 Ex VAT 25% Off
Quantity
Xnova Lightning 3220-950KV Brushless Motor 950Kv

Xnova Lightning 3220-950KV Brushless Motor 950Kv

Xnova "Lightning" 3220-950KV Brushless Motor, an updated powerhouse of a motor for your heli needs. Any helicopter asking for insane power swinging 380-420mm blades will be more than happy with this masterpiece.

Features:

  • Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature
  • Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C
  • New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance
  • 100% hand-wound
Specifications:

Slots & Poles: 12n10p
Winding T: YY
rpm/V: 945
Volt (V): 10 / 22.2
Io(A): 1.8 / 3.0
Rm (mohm): 18 / 18
Weight (without connector): 200g
Body Length (no shaft): 45mm
Diameter: 40.5mm
Shaft Length: 22mm
Shaft Dia.: 5mm
Mounting Holes CTC Distance: 25mm
Mounting Screw: M3x0.5
Max Eff. Curr.: 31.62 / 60.83
Max Eff.: 88.62 / 90.14
Kt (Nm/A): 0.0101
Km (Nm/sqrt(w)): 0.0749
Max Continuous Power(Watts): 1450
Peak Continuous Power(Watts) (2 sec): 1900
Max Continuous Current(Amps): 66

€169.90


€140.41 Ex VAT
Xnova Lightning 3225-1100KV Brushless Motor 1100kv

Xnova Lightning 3225-1100KV Brushless Motor 1100kv

Xnova brushless high performance out runner motor designed for extreme hard 3D, running in 420-500mm blade size helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  • Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature
  • Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C
  • New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance
  • 100% hand-wound

Specifications:

Slots & Poles 12n10p
Winding T YY
rpm/V 1100
Volt (V) 10 / 22.2
Io(A) 3.1 / 5.1
Rm (mohm) 10 / 10
Weight (without connector) (g) 240
Body Length (no shaft) mm 50
Diameter (mm) 40.5
Shaft Length (mm) (Details pictures) A
Shaft Dia. (mm) 5
Mounting Holes CTC Distance (mm) 25
Mounting Screw M3x0.5
Max Eff. Curr. 55.68 / 106.40
Max Eff. 88.86 / 90.41
Kt (Nm/A) 0.0087
Km (Nm/sqrt(w)) 0.0868
Max Continuous Power(Watts) 1900
Peak Continuous Power(Watts) (2 sec) 2500
Max Continuous Current(Amps) 86

€189.90


€156.94 Ex VAT
Quantity
Xnova Lightning 4025-1120KV Brushless Motor w/6mm Shaft

Xnova Lightning 4025-1120KV Brushless Motor w/6mm Shaft

This is the Xnova Lightning 4025-1120KV 1.5Y Brushless Motor with a 6mm "Type A" 36mm Shaft. The "Lightning Series" was developed from the extremely successful XTS Platform. Lightning series motors are simply the pinnacle of performance, and efficiency. If you're looking for the absolute best brushless motor within the Xnova line up, this is what you're looking for! This high performance brushless motor was developed 520-600mm size helicopters when powered with 6S.

Specifications:

  • Slots & Poles: 24n8p
  • Winding T: 1.5Y
  • rpm/V: 1120
  • Volt (V): 10 | 20 | 25
  • Io(A): 2.7 | 3.2 | 3.6
  • Rm (mohm): 6.8 | 6.8 | 6.8
  • Weight (without connector): 395g
  • Body Length (no shaft): 56.2mm
  • Diameter: 49.5mm
  • Shaft Length: 28mm
  • Shaft Diameter: 6mm
  • Max Eff. Curr.: 63.01 | 97.01 | 115.04
  • Max Eff.: 91.43 | 93.40 | 93.74
  • Kt (Nm/A): 0.0085
  • Km (Nm/sqrt(w)): 0.1034
  • Max Continuous Power (Watts): 3000
  • Peak Continuous Power (Watts) (5 sec): 4000
  • Max cont. current (A): 110

€274.00


€226.45 Ex VAT
Quantity
Xnova Lightning 4030-1000kV Brushless Motor (Shaft A)

Xnova Lightning 4030-1000kV Brushless Motor (Shaft A)

This is the Xnova Lightning 4030-1000KV 1.5Y Brushless Motor with a 6mm "Type A" 38mm Shaft. This high performance brushless motor was developed for 3D flying on 6-7S on the SAB Raw 700 PIUMA helicopter.

NOTE: For operation on 6S (20T motor pulley) or 7S (18T or 19T motor pulley).
Features:

  • Higher efficiency over previous generation
  • Thinner stator laminations
  • Lower temperatures
  • Smooth operation; no cogging
  • Specialized wires,heat resistance up to 250 degree C
  • Precision balanced
  • High performance stator metal sheet
  • Optimized ventilation
  • High quality NMB bearings
  • Superb quality and machining of CNC parts

Specifications:

  • Slots and Poles: 24n8p
  • Winding T: 1.5Y
  • rpm/V: 1000
  • Volt (V): 10 | 20 | 25
  • Io(A): 3.1 | 5.1 | 5.3
  • Rm (mohm): 7 | 7 | 7
  • Weight (without connector): 435g
  • Body Length (no shaft): 61.2mm
  • Diameter: 49.5mm
  • Shaft Length: 38mm
  • Shaft Diameter: 6mm
  • Max Eff. Curr.: 66.55 | 120.71 | 137.58
  • Max Eff.: 90.68 | 91.55 | 92.30
  • Kt (Nm/A): 0.0095
  • Km (Nm/sqrt(w)): 0.1141
  • Max Continuous Power (Watts): 3500
  • Peak Continuous Power (Watts) (5 sec): 6900
  • Max cont. current (A): 100

€325.00


€268.60 Ex VAT
Quantity
Xnova Spare Shaft 4535 type A

Xnova Spare Shaft 4535 type A

Xnova Spare Shaft 4535 type A

€26.90


€22.23 Ex VAT
Quantity
Xnova Spare Shaft 4535 type C

Xnova Spare Shaft 4535 type C

Xnova Spare Shaft 4535 type C

€26.90


€22.23 Ex VAT
Quantity
Xnova XTS 2820-890KV 10P brushless motor for Goblin 380, Sport flyer

Xnova XTS 2820-890KV 10P brushless motor for Goblin 380, Sport flyer

Designed for powerfully 3D and excellent flight-time , custom made for your SAB-GOBLIN-380 helicopter where highest performance to weight ratio is important.
Xnovamotors specifications are real data and not modified,,  we convince you by flight-performance and not datasheets

SPECS:
  • Slots & Poles    12n10p
  • Winding T    10YY
  • rpm/V    890
  • Volt (V)    10 / 22.2
  • Io(A)    1.2 / 1.7
  • Rm (mohm)    34 / 34
  • Weight (without connector) (g)    140
  • Body Length (no shaft) mm    40.7
  • Diameter (mm)    36
  • Shaft Length (mm) (Details pictures)    A
  • Shaft Dia. (mm)    5
  • Mounting Holes CTC Distance (mm)    25
  • Mounting Screw    M3x0.5
  • Max Eff. Curr.    17.77 / 31.51
  • Max Eff.    86.49 / 89.21
  • Kt (Nm/A    0.0107
  • Km (Nm/sqrt(w))    0.0550
  • Max Continuous Power(Watts)    1080
  • Peak Continuous Power(Watts) (2 sec)    1360
  • Max Continuous Current(Amps)    48

€129.00


€106.61 Ex VAT
Quantity
Xnova XTS RM 2204-2300KV FPV Racing Motor

Xnova XTS RM 2204-2300KV FPV Racing Motor

Xnova's 2204-2300KV supersonic FPV racing motor is the ultimate in precision, quality and performance. 100% hand wound and fully tested, these motors are precisely balanced and give FPV racers a high quality motor option.

Features:

  • High performance
  • Finest CNC quality
  • Ultimate efficiency
  • Low cogging torque and smooth running
  • Precise balanced and fully tested
  • 100% hand wound
  • Includes prop adapter and mounting hardware

Specifications:

Number of Stator Slots: 12
Number of Magnet Poles: 14
No-Load Current (@10V): 1.0
Weight: 29g
Battery: 3-4S
Resistance: 0.070 ohm
Motor Timing: Medium/Medium High
PWM Frequency: 8 KHz

SET OF 1 MOTOR

€25.00


€20.66 Ex VAT
Quantity
Xnova XTS Supersonic FPV Racing Prop Adaptor

Xnova XTS Supersonic FPV Racing Prop Adaptor

Xnova XTS Supersonic FPV Racing Prop Adaptor RM22XX

High quality machined and beautifully anodised

Prop adaptor bolts directly to the motor can. Designed for 22XX series motors with a 3mm shaft.

€8.50


€7.02 Ex VAT
Quantity