Velcro & Glue materials

GLASS FILAMENT TAPE

Economical filament tape is tough and strong. Contains glass yarn filaments for up to 300 lbs. in tensile strength.

These adhesive tapes feature a longitudinal reinforcement consisting of glass fibre strips. The tape is very strong and has strong adhesive power. It is also extremely resistant to tearing.

Roll of 50 meters, perfect to use on Shock flyers, and other airplanes as a hinges.

Specification:

• Width: 25 mm
• Adhesive power: 7.2 N / cm
• Tear strength: 260 N / m

3M Dual Lock reclosable Fastener, strong, Durable, Versatile Hold

When you need a strong, reliable, yet removable closure or attachment, 3M Dual Lock Reclosable Fasteners are the easy alternative to traditional fastening methods such as screws, nuts or bolts.
This invisible fastener works behind the scenes to create a snug fit and smooth lines for improved aesthetic and sleek appearance.
The strong, interlocking mushroom-shaped heads close with a snap to ensure a secure attachment and help to reduce concerns about material damage and deformation, fastener placement, contamination and corrosion, and the challenges of joining dissimilar materials. From ceiling attachments on buses and trains, and light panels for trade show exhibits, to interior attachments for vehicles, 3M Dual Lock Reclosable Fasteners are versatile, allowing for greater freedom of design with the ease of tape application.

Delivery:

• Delivered in length of  50 cm with Adjesive sides.25mm wide. there is no Hook/Loop side, its same material which can be used on both sides of the product you want to hold in place

3M Gyro Mounting anti vibration pressure sensitive adhesive Pads 2.5mm (6pcs)

These 3M high quality Gyro and receiver mounting pads are double sided tape which is used to both securely hold the gyro in place but just as importantly act as a dampener between the frame and the gyro. MADE from 3M material, with 2.5mm of thickness, 6pcs in a set
This allows for shock absorption from the Helicopters natural vibration.
Each pad is cushioned to help to eliminate vibration

Fits All Gyros, servos and more !!

These 3m high quality Gyro and receiver mounting pads are double sided tape which is used to both securely hold the gyro in place but just as importantly act as a dampener between the frame and the gyro.
This allows for shock absorption from the Helicopters natural vibration.
Each pad is cushioned to help to eliminate vibration.

4 PCS in set

Best way to properly fasten your battery packs is to use Self Adhesive Velcro on the battery (loop side) and Self adhesive Velcro (hook side) on battery tray.
Also works well in attaching Receivers as it absorbs some of the vibrations.
Set of Both sides, Hook and Loop, 1 meter each. 25mm wide,Black color

3mm Thick Black Double Sided Foam Tape 20mm x 1 Meter. 

Excellent vibrations absorber. Glue on gyros, FBL units, and more.
This is a strong, general purpose foam tape coated on both sides with an adhesive that will perform in both internal & external applications.

The foam is a high quality polyolefin coated with a high tack acrylic adhesive.
This tape has been designed as an economic solution for your adhesive foam tape requirements.

POWERZIP strip, 15mm wide, 1meter long, 2mm thick

Power tape, holding power is up to 50 kg!!, Double face transparent silicone tape ( red cover), excellent for installation of wires, wood, fiber, Gyro , Receiver and more..

Its suitable for internal & external use it offers high adhesion to a wide variety of surfaces. It has superior 'wetting out' properties which increase the bonded surface area increasing the strength of the bond. It has excellent ageing properties and is resistant to U.V. light, abrasion, corrosion & moisture.
Service temperature is -30°c - +80°c (continuous)/ +130°c (shorterm).

There is a red easy-peel liner one one side of the tape. Once the liner is removed, the tape is completely clear & ideal for glass/perspex where an invisible fixing/fastening is required.

Also, ideal for fastening things to any surface, Anti vibration.

Revell Contacta Professional' is for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine gluing of tiny details and clear part edges. This professional glue is available in tow sizes.

Grey double coated acrylic foam tape with a high tack acrylic adhesive. 2mm thick. The VHB double sided tape is a tape which is extremely strong, conformable, versatile and UV resistant.This tape bonds to a wide variety of surfaces, including: Metals - Some plastics Composites - Sealed woods - Glass

Perfect for Electronics applications, receivers, gyros, and wires. and small servos

Pack of 1meter

Grey double coated acrylic foam tape with a high tack acrylic adhesive, 25mm wide, 2 mm thick. The VHB double sided tape is a tape which is extremely strong, conformable, versatile and UV resistant.This tape bonds to a wide variety of surfaces, including: Metals - Some plastics Composites - Sealed woods - Glass

Perfect for Electronics applications, receivers, gyros, and wires. and small servos

Pack of 1meter

Dream, Design, Deliver with VHB 4991 tape. It is a gray 2mm, multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces.

Perfect for Electronics applications, receivers, gyros, and wires. and small servos

• Pack of 1meter
• 2mm thick
• 15mm wide

Dream, Design, Deliver with VHB 4991 tape. It is a gray 2mm, multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces.

Perfect for Electronics applications, receivers, gyros, and wires. and small servos

• Pack of 1meter
• 2mm thick
• 25mm wide

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

• Color: colorless
• Filing gap- up to 10mm
• Bonding time: 55min
• Curing time: 150 min
• Pack of 50ml, with 1 mixing tube

Bonding gun (Dispence gun) Not included

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)

Very high impact and peel strength

Good thermal resistance

Thixotropic formulation

Low exothermic reaction and shrinkage

Solvent free

Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

Technical data:
Curing time (25 °C): 210 minutes
Bonding time: 15-25min
Handling strength (23 °C)**: 4 hours
Viscosity: 100,000 to 150,000 MPas
Maximum gap fill: 8 mm
Colour: Dark grey
Elongation at break: 6%.
Heat deflection temperature: 24 h / 23 °C = 60 °C; 2 h / 80 °C = 85 °C
Flexural strength: 90 MPa
Bending modulus: 2200 MPa
Tensile strength: 54 MPa
Compressive strength: 70 %.

Delivery scope: 50Ml package, with 1 mixing Tube

We recommending to use the Bonding gun (Dispence gun) , Sku is ELIX15138, please order it separately.

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

• Color: Black
• Filing gap- up to 20mm
• Bonding time: 15 min
• Curing time: 150 min
• Pack of 50ml, with 1 mixing tube

Bonding gun (Dispence gun) Not included  

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)

Very high impact and peel strength

Good thermal resistance

Thixotropic formulation

Low exothermic reaction and shrinkage

Solvent free

Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

• Color: Biege
• Filing gap- up to 10mm
• Bonding time: 20 min
• Curing time: 100 min
• Pack of 50ml, with 1 mixing tube

Delivery scope: 50Ml package, with 1 mixing Tube

We recommending to use the Bonding gun (Dispence gun) , Sku is ELIX15138, please order it separately.

Tube of 56 gr, this cement is flexible, after the mix it is strong as steel.

Use to repair Metal, Wood, plastic

EXTRON glue sticks are perfect for all common 11mm glue guns.
The ingenious adhesive mixture is characterized by an optimal melting point. EXTRON glue sticks offer excellent gluing performance on almost all materials, whether wood, glass, paper, cardboard, stone, porcelain, textile, ceramic and much more. Ideal for hobby and workshop for crafting, repairing, decorating, mending, fixing or assembling.
Dimensions each approx. Diameter 11 mm x 270 mm
Sold as a Single Stick

The Extron 10-port connector shape allows you to mold "handles" to the ten most popular model building connectors.

The Extron connector mold is made of CNC machined aluminum for durability. The application is very easy (see pictures). All you need is a standard hot glue gun.

1. moisten the inside of the plug form with a commercially available release agent, e.g. wax spray
2. insert plug or socket with cable already soldered into the mould and close with the upper part of the mould
3. press hot glue into the central hole until it swells out at the side outlet holes
4. after a short cooling down, remove the plug from the mould and remove the sprue with a sharp knife - that's it!

The Extron connector shape is suitable for:

• T connector (Deans)
• T socket (Deans)
• MPX 6-pin plug
• MPX 6-pin socket
• MPX 8-pin plug
• MPX 8-pin socket
• XT-60 connector
• XT-60 socket
• XT-90 connector
• XT-90 socket

High Quality Cable Ties, 140 X 3 MM, perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

High Quality Cable Ties, 4.8mm x 200mm Long perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

High Quality Cable Ties, 4.8mm x 370mm Long perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

High Quality Cable Ties, 7.6mm x 370mm Long perfect for holding Servo Wires, and holding other applications.

Heat stabilized cable ties are ideal for use in applications exposes to higher temperatures.

Made from Nylon 66. Class UL94 V2

Pack of 10 Ties, Black Color

J-B Weld 100% Hi-Temp Red Silicone Gasket Maker and Sealant is an RTV (Room temperature vulcanised) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher continuous temperatures up to 550 F or 650 F intermittent might exist.
Upon curing, which occurs when the product is exposed to the moisture in the air, the silicone forms a tough, long lasting, waterproof seal on most surfaces.
It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.

Great for the following applications:

• Oil Pans
• Valve Covers
• Exhaust Manifolds
• Water Pumps
• Timing Covers
• Differential Covers
• Drive Housing
• Oven Doors

Product Specifications

• Set Time: 1 Hour
• Cure Time: 24 Hours
• Cure Colour: Red

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial applications. J-B HighHeat epoxy outperforms conventional epoxy putties at high temperatures and sets in one hour at room temperature. After eight hours the HighHeat epoxy is fully cured to form a solid reliable bond.

HighHeat is rated at a tensile strength of 800 PSI and able to withstand continuous heat exposure of 204ºC (400ºF) and intermittent heat exposure to 260ºC (500ºF)

Great for the following applications:

• Exhaust Manifolds
• Tail Pipes
• Mufflers
• Engine Blocks
• Duct Work
• Machinery
• High Temperature Projects

Product Specification:

• Strength: Strength 800 PSI
• Set Time: 1 Hour
• Cure Time: 8 Hours
• Dries: Machine Grey

J-B KwikWeld is the fast setting version of The Original J-B Weld two-part epoxy cold weld system. J-B KwikWeld provides strong, lasting repairs to metal and other surface types. After mixing it will form a permanent bond which can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in six minutes and is fully cured within six hours.

Tensile strenght 2500 psi
Resistant to constant temperature up to 300c
Sets in 6 minutes. Full strenght in 4-6H
Bonds metal, plastic, ceramic, wood, masonary
Can be drilled, filled, sanded, machined, tapped and painted

Use on:

J-B MarineWeld is a specially formulated two-part epoxy cold weld system that will provide strong, lasting repairs. Bonding surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld will set in 20-25 minutes at room temperature and fully cures in under 24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and has been designed to retain its strength above or below the waters surface.

MarineWeld has a 1:1 mixing ratio and tensile strength of 3960 PSI.

Great for the following applications:

• Boats
• Personal Watercraft
• In/Outboard Engines
• Deck & Hull Accessories

Product Specification:

• Strength: 3960 PSI
• Set Time: 20-25 Minutes
• Cure Time: 15-24 Hours
• Cure Colour: Dark Grey

J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 370C (700 F)

Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard.

Projects: Mufflers, Pipe Joints and Exhaust Systems.

J-B Weld Syringe is the original cold-weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing.

At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. Full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550° when fully cured.

Static Mixers: Is an easy to use attachment to the syringe that allows for precise mixing of the two component adhesives. Each mixer comes with 16 static elements to ensure complete mixing. The mixer tip can be cut to allow for large and easier flow of material.

•     Household Repairs
•     Automotive
•     Plumbing
•     Marine
•     Hobby Crafts & More

Product Specification:

•     Strength: 5020 PSI
•     Set Time: 20-25 Minutes
•     Cure Time: 15-24 Hours
•     Cure Colour: Dark Grey

J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies and hundreds of other applications to prevent loosening of fasteners from shock and vibration.

J-B Weld Perma-lock Medium Strength Threadlocker is ideal for applications requiring easy disassembly with hand tools.

Great for the following applications:

•     Rocker Arms
•     Stud Bolts
•     Frame Bolts
•     Fasteners and Bushings
•     Loose Screws
•     Vibration Sensitive Items

Product Specification:

    Temperature: Resistant upto 148ºC (300*F)
    Ideal for 1/4" to 1" Fasteners
    OEM Approved
    No Spill, Drip or Clog Cap
    Sizes: 6ML

PlasticWeld is a fast-setting, hand mixable epoxy putty that forms a durable bond to major plastic types. After mixing, it will form a polymer compound that can be molded or  built up to repair just about any plastic. Once cured it can be drilled, carved, sanded and even painted. PlasticWeld has a 20-25 minute work life. PlasticWeld will cure to an off-white color in under three hours and is rated at a tensile strength of 350 PSI.

Does not adhere to polyethylene, polypropylene or some other plastics. We advise testing for suitability first.

Great for the following applications:

• Rigid & Semi Flexible Plastic
• ABS, PVC & CPVC Pipes
• Automotive Trim & Bumpers
• Fiberglass Parts
• Vinyl Siding

Product Specification:

• Strength: 350 PSI
• Set Time: 25 Minutes
• Cure Time: 3 Hours
• Cure Colour: Off White

JB WELD SteelStik is a non-rusting, steel reinforced epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded, built up or used to patch and repair steel components. SteelStik sets in three to five minutes and after sixty minutes, can be drilled, tapped, machined, ground, filed and even painted.

SteelStik is rated at a tensile strength of 900 PSI and will withstand temperatures of up to 148ºC (300ºF).

Great for the following applications:

• Automotive & Machine Parts
• Exhaust Systems
• Plumbing
• Stripped Threads
• Rust Damage
• Household Repairs

Product Specification:

• Strength: 900 PSI
• Set Time: 5 Minutes
• Cure Time: 1 Hours
• Cure Colour: Dark Grey

J-B WoodWeld is a fast setting two-part epoxy system formulated for wood bonding and repairs. It will provide a lasting permanent bond that is stronger than the wood! J-B WoodWeld can be shaped, tapped, filed, sanded and drilled sets in six minutes and cures in under three hours.

Rated at a tensile strength of 1800 PSI, J-B WoodWeld cures to a light tan color.

Great for the following applications:

• Indoor/Outdoor
• Furniture
• Doors
• Windows
• Trim/Moulding
• Decks & More

Product Specification:

• Strength: 1800 PSI
• Set Time: 6 Minutes
• Cure Time: 1-3 Hours
• Cure Colour: Light Tan

Use JB WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply J-B WELD, and let it cure. That's all there is to it!J-B Weld is an amazing formula which once binds will produce an ever lasting strong bind which will hold tight and not come loose. Often used on mount pinions to a motor’s main shaft.The pinion will not slip or fall once J-B is applied. The formula is easy to apply and comes in two tubes. J-B weld is a must have in anyone’s tool box and has been proven to be the de-facto in cold soldering in many R/C hobbies including Radio Controlled Hobbies

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. J-B Weld will form a permanent bond that once cured can be shaped, tapped, filed, sanded and drilled. At room temperature J-B Weld will set in 20-25 minutes to a dark grey color. A full cure is reached in under 24 hours.

J-B Weld can withstand temperatures up to 287ºC (550ºF) once fully cured.

We recommending to use this glue on clutches, metal( mufflers and engine parts) and much more.

Great for the following applications:

•     Household Repairs
•     Automotive
•     Plumbing
•     Marine
•     Hobby Crafts & More

Product Specification:

•     Strength: 5020 psi
  
•     Set Time: 20-25 Minutes
•     Cure Time: 15-24 Hours
•     Cure Colour: Dark Grey

Use JB WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes.

This is a porofessional Size - 142gr tubes x 2 (10OZ total)

J-B weld is a must have in anyone’s tool box and has been proven to be the de-facto in cold soldering in many R/C hobbies including Radio Controlled Hobbies

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. J-B Weld will form a permanent bond that once cured can be shaped, tapped, filed, sanded and drilled. At room temperature J-B Weld will set in 20-25 minutes to a dark grey color. A full cure is reached in under 24 hours.

J-B Weld can withstand temperatures up to 287ºC (550ºF) once fully cured.

We recommending to use this glue on clutches, metal (mufflers and engine parts) and much more.

Great for the following applications:

•     Household Repairs
•     Automotive
•     Plumbing
•     Marine
•     Hobby Crafts & More

Product Specification:

•     Strength: 5020 PSI
•     Set Time: 20-25 Minutes
•     Cure Time: 15-24 Hours
•     Cure Colour: Dark Grey

The strong adhesion allows the nano tape to stick (adhesion: attraction between 2 different fabrics). And because the paste is not actually done by means of glue, the tape also leaves no residue.

Other types of tape can be discarded after use, the adhesive properties have decreased or even disappeared. The best thing about this technique is that it is reusable. If the adhesive properties have decreased due to dirt, grease or other contaminants, you can hold the piece of tape under the tap and rinse it off. After it has dried, it is reusable.

Use:

Cut a piece to desired length and stick on a smooth surface. Then peel off the layer of plastic on the other side to get double-sided tape. It's that simple, no tricks

Delivery package

• length 1 Meter
• 2mm thick, 15mm wide