Upgrades Blade Helis

Lynx Heli Innovations has redesigned the standard 130 X plastic main grip, using aluminum alloy.

Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.

We spent hours optimizing the design to achieve the required strength with a final weight beyond compromise. We are pilots, and we demand a light helicopter.

After many flights, we decided on a twin 5x2x2 radial bearing design. Simple, lightweight and durable.

The linkage balls are aluminum to minimize weight.

The details and design of these blade grips add to the performance of your helicopter.

Strength, durability, accurate CNC tolerances, finish, and most important weight.

Almost unbelievable, but this main grip set weighs just 1.3g heavier than the original plastics grips, with a huge increase in rigidity and strength.

These grips increase flight precision, flight after flight.

Packing list:

2 x 130 X – CNC Main Grips

4 x Radial bearing 5x2x2

2 x Hex cap screw M2x8

 Lynx Heli Innovations 130 X Motor Heat Sinks LX0321

 Lynx Heli Innovations is always looking for a better way of doing things.

Lynx closely test the standard 130 X motor during 3d fly followed by intensive bench test to simulate and retrieve information of motor temperature and dissipation during the harder fly condition. Thanks cooperation with electronics and motor expert, Lynx was able determinate the perfect motor heat sinks for your 130 X standard motor.

Small details make an important difference; Thermal Analysis software interfaced with FEA analysis software give us the support to determinate the best compromise between weight and thermal dissipation efficiently. Your 130 X standard motor will definitely run cooler and speed-up the recovery “low” temperature time between each multi-session fly.

FEATURES:

• Help motor to run cooler with general better performance.
• Help to a fast “low” temperature recover between multi-session fly.
• Low temperature motor running means more stable power and longer motor life.
• Better motor efficacy and low temperature run will reduce risk of motor / esc motherboard electronics damage.
• Unique and stylish Lynx design
• Easy and quick installation thanks specific design
• Thermal Analysis Software interfaced with FEA (Final Elements Analysis) assisted design  for the best compromise design, weigh, and thermal dissipation efficiently.

TECHNICAL SPECIFICATION:

Motor Heat Sinks Material: Aluminum 6061-T6  ,anodized finish

1 x 130X CNC Motor Heat Sink

TIPS AND ADVISES FOR BEST FUNCTION:

Add smaller qty of lock thread (medium or strong resistance) in the motor heat sinks clamping surface, this will remove any gap of air between motor and heat sinks surface optimizing thermal exchange, will also easily firmly lock the heat sinks to the outside motor housing

Lynx Heli Innovations has redesigned the standard 130 X plastic head center hub, using aluminum alloy.
Two finish anodize color are available Silver and Red Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight.
We spent time optimizing the design and fly testing to achieve the required strength with a final weight beyond compromise.
We are pilots, and we demand a light helicopter. Lynx head center hub is nice and weight only 1.2g only 0.1g heavier than plastic one. Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight, Lynx head center hub will increase and assure flight precision, flight after flight, adding top performance in your 130X.
FEATURES: - Direct replacement for the standard 130 X part - Advanced main shaft locking system to assure solid and precise connection - Precise and accurate finish tolerances increase esthetics and fly performance - FEA (Final Elements Analysis) design assisted, achieve lightweight and maximum strength.

TECHNICAL SPECIFICATION:

• Center Hub Material: Aluminum 7075-T6 – anodized finish
• Assembly weight: 1.2g

PACKING LIST:

• 1 x 130X CNC Head center hub
  
• 2 x PAN head screw m1.6x6

Lynx Heli Innovations introduce high quality fiber glass, hands air-brushed canopy.
180CFX have now with Lynx multiple canopy profile shape and for your fully enjoyment for each canopy shape we will made many paint design.
Special paint and fiber glass cure process assure the best look canopy you ever looking with a superior shock resistance and an acceptable weight.
So the next time you want to upgrade your helicopter look  – think Lynx Canopy!

FEATURES:

• Direct replacement for 180CFX canopy.
• Newest canopy profile design and multiple options per profile design and paint color.
• Automotive Quality paints and clear coats.
• Professional air-brushed and finish quality
• Incredible rapport quality / cost

TECHNICAL SPECIFICATION:

• Canopy base made by High quality Fiber Glass
• An allergic and safe Automotive Quality paints and clear coats.
• Weight: 11gr

PACKING LIST:

• 1 x 180CFX Fiber Glass air brush canopy – LG Style

Spare parts for RKH's CNC 3 Blades Head System

Included:

• 3 Rotor Head Linkages (3pcs).

CNC AL Tail Motor Mount Set (Green) for Blade 200 SRX

Tail Rotor Shaft Aluminum Drive Pulley for Blade 300CFX

Brushless conversion MCPX, included Main motor 11000kv, Pinion, and Brushless controller 7a

Carbon Fiber Vertical Fin

SPECIAL Charging cable adapter for blade MCPX, handling 6 batteries .

Insure you use same capacity batteries to charge sufficiently.
produced from 18 awg silicone cables for best quality and low resistance.

Charging Cable for MCPX lipo, you can build your multiple cable by purchase multiple cables and connect them parallel.

Description:

• Precision CNC 3K Carbon Tube Tail Boom.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Aluminum Tail Boom: 3.66(g) = 0.13(oz).
• CNC 3K Carbon Tube Tail Boom: 2.44(g) = 0.086(oz).

Includes:

• CNC 3K Carbon Tube Tail Boom-Standard Length (1pcs).

 

Description:

• Precision CNC Aluminum Main Rotor Hub and Main Blade Grip.
• The Linkage Arm Hub is designed to keep the Linkage Rod doesn't out when flying or crash.
• The CNC Aluminum Main Blade Grip used high quality bearings for being more precision in control.
• All optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Combo: 6.20(g) = 0.21(oz).
• CNC AL Head Combo 01: 6.32(g) = 0.22(oz).

 

Precision CNC Aluminum Horizontal Stabilizer Fin Mount: Increase grip and reduced vibration.

• Compatible and replacement Stock.
• Optimized for weight and durability.
• Use for Blade 200SRX.
• CNC AL Horizontal Stabilizer Fin Mount Set: 0.65(gR)

Included:
CNC AL Horizontal Stabilizer Fin Mount (1set).

Hardware:
M1.6x5mm Pan Head Screw (4pcs).

Description:

• This tool is designed to level your swashplate. Adjust 3 swash linkage lengths or trim till you can't see any space at either of the 3 points of contact. This ensure that the swash perpendicular to the main shaft at neutral position.

Usage:

• Use for Blade 180 CFX.

Included:

• CNC AL Swash Leveler (1pcs).

 

Description:

• Precision CNC Aluminum Tail Boom Clamp and Delrin Tail Push Rod Guide combine are designed to keep stronger than Stock, replacement easily and support the Tail Push Rod better.
• Compatible and replacement the Stock.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Plastic Tail Boom Clamp Set: 0.56(g) = 0.019(oz).
• CNC AL Tail Boom Clamp Set: 0.81(g) = 0.028(oz).

Included:

• CNC AL Tail Boom Clamp (1set).

 

CNC AL Tail Boom Mount (1set).

CNC AL Tail Boom Mount (1set)

1. Description:

• - Precision CNC Aluminum Tail Boom Mount Set.
• - Stainless Steel Cap Screw and Steel High Quality Radial Bearing.
• - Optimized for light weight and maximum rigidity, stability and durability.
• - Assembly with the Main Frame, Tail Boom and Tail Servo easily.
• - Compatible and replacement the Stock.

2. Usage:

• - Use for Blade 180 CFX.

3. Weight:

• - Stock Tail Boom Mount Set: 8.20(g) = 0.29(oz).
• - RKH's Tail Boom Mount Set: 7.75(g) = 0.27(oz). Lighter weight than Stock: 0.45(g) = 0.02(oz).

4. Included:
 

 

Description:

• Precision CNC Aluminum and Delrin combine Tail Push Rod Guide Set are designed to keep stronger than Stock, replacement easily and support the Tail Push Rod better.
• Compatible and replacement the Stock.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Plastic Tail Push Rod Guide Set: 0.30(g) = 0.010(oz).
• CNC AL Tail Push Rod Guide Set: 0.85(g) = 0.029(oz).

Includes:

• CNC AL Tail Push Rod Guide (2 sets).

 

Description:

• Precision CNC Aluminum Tail Servo Mount and Stainless Steel Cap Screw.
• Compatible and replacement the Stock.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Includes:

• CNC AL Tail Servo Mount (1set).

 

Description:

• Precision CNC Aluminum Tail Boom Clamp and Delrin Tail Push Rod Guide combine are designed to keep stronger than Stock, replacement easily and support the Tail Push Rod better.
• Compatible and replacement the Stock.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Plastic Tail Boom Clamp Set: 0.56(g) = 0.019(oz).
• CNC AL Tail Boom Clamp Set: 0.81(g) = 0.028(oz).

Included:

• CNC AL Tail Boom Clamp (1set).

 

CNC AL Head Combo 01 (Red) - Blade 200SRX

• The CNC Aluminum Main Rotor Hub and CNC Hardened Steel Spindle Shaft.
• The CNC Aluminum Main Blade Grips used high quality bearings for being more precision in control.
• All optimized for weight and durability.

Use for Blade 200SRX.

Weight:

• Stock Plastic Head Combo: 5.60(g) = 0.18(oz).
• CNC Aluminum Head Combo: 5.37(g) = 0.17(oz). Lighter weight than Stock: 0.23(g) = 0.01(oz).

Included:

• 1 x (SKU: 200SRX007) CNC Hardened Steel Spindle Shaft Set
• 1 x (SKU: 200SRX010) CNC AL Main Rotor Hub Set
• 1 x (SKU: 200SRX030) CNC AL Main Blade Grip Set

Description:

• Precision CNC AL Lower Main Shaft Bearing Block.
• Stainless Steel Cap Screw and Steel High Quality Radial Bearing.
• Compatible and replacement the Stock.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock AL Lower Main Shaft Bearing Block Set: 2.75(g) = 0.097(oz).
• RKH's CNC AL Lower Main Shaft Bearing Block Set: 2.47(g) = 0.087(oz).
  

Includes:

• CNC AL Lower Main Shaft Bearing Block (1set).

• Precision CNC Aluminum Main Motor Mount.
• Adjustable Motor to get the best geamesh.
• Can use with RKH's CNC Delrin 104T Main Gear (SKU: 200SRX305).
• Compatible and replacement Stock.
• Optimized for weight and durability.

Use for Blade 200SRX.

Weight:

• Stock AL Main Motor Mount Set: 4.37(g) = 0.14(oz).
• CNC AL Main Motor Mount Set: 4.20(g) = 0.13(oz). Lighter weight than Stock: 0.17(g) = 0.01(oz).

CNC AL Main Motor Mount (1set).

Hardware: 2.2x4.0x0.5mm Washer (4p

Description:

• Precision CNC Aluminum Swashplate and Stainless Steel Linkage Balls to get more strength.
• The rear Swashplate Arm is designed to put the Linkage Rod in/out easily.
• Used high quality bearing to decrease slop and get more precise in control.
• Increase the swashplate tilting angle ability up to 21.25 degrees.
• Get precision and more power on cyclic control.
• All optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Plastic Swashplate Set: 2.58(g) = 0.09(oz).
• CNC Aluminum Swashplate Set: 3.01(g) = 0.10(oz).

Includes:

• CNC AL Swashplate (1set).

 

The Precision CNC Aluminum Main Blade Grip set is designed to improve stability, durability and performance on the helicopter. It's directly replaced the stock plastic main grip. The Precision CNC Aluminum Main Blade Grip set is machined with high tolerance from aircraft aluminum to achieve the best possible precision and using triple non-shield type ball bearing for the Aluminum Main Blade Grips to avoid stripping and to perform efficiently under high RPM and 3D maneuver condition On mcpx flybarless head system. And yet, the Aluminum Main Blade Grip design allows pilot to set damping from soft to hard to fit your best flying style. Threaded steel ball join is also used to prevent wear and tear for long time use. More than that, the Precision CNC Aluminum Main Blade Grip set is very light weight 0.12gram lighter than stock plastic grip while equipped with triple ball bearing and threaded steel ball join. The Aluminum Main Blade Grip design will bring the best performance and the best look to your helicopter.

Includes

•    2 x Precision CNC Aluminum Main Blade Grip
•    6 x Non-Shield Ball Bearing
•    2 x Damper Spacer (Soft)
•    2 x Damper Spacer (Hard)
•    2 x Threaded Steel Ball Join
•    Hardware

Using the finest precision, high quality CNC finish, Lynx has produced our hardened carbon steel main shaft for the 180CFX.
The choice to use C40 carbon steel heat-treated to 50 Rockwell Hardness was used to achieve the highest strength.  This Carbon Steel has been tested in our spindles and because of its added hardness it can withstand minor crashes without damage or bending.
Lynx aims to fulfill all high performance needs for your 180CFX, without compromise, offering more choices to meet your preference:
Carbon steel for highest strength/stiffness
Carbon fiber for the ultimate lightweight
Titanium for best ratio of strength and weight.

FEATURES:

• Precise tolerances eliminate vibrations and increase fine control feeling.
• Direct replacement for standard 180CFX main shaft.
• Final Elements Analysis used to achieve the lightest weight and maximum strength.

SPECIFICATION

• Shaft material: C40 Carbon Steel, heat-treated to 50 Rockwell Hardness.
• Collar material: Stainless Steel
• Assembly weight: 7g

PACKING LIST:

• 1 x 180CFX Carbon Steel Main Shaft
• 1 x 180CFX Main Shaft Collar
• 1 x Hex Cup Screw M1.6x5 Hex Socket 1.5
• 1 x Hex Cup Screw M1.6x10 Hex Socket 1.5

CNC CF Tail Fin Set (Black-Red) Blade 180 CFX

CNC Carbon Fiber:
 

• Compatible with Plastic and Aluminum Tail Gear Case.
• Optimized for weight and durability.

Weight:
 

• Stock Plastic Tail Fin Set: 1.12(g) = 0.039(oz).
• CNC CF Tail Fin Set: 1.06(g) = 0.037(oz). Lighter weight than Stock.

* Hardware:
 

• (SKU: 225005W-10) 2.2x5.0x0.5mm Steel Washer (1pcs).
• (SKU: M1.6x4PH-10) M1.6x4mm Pan Head Screw (1pcs).
• (SKU: M1.6x4SPH-10) M1.6x4mm Self Tapping Pan Head Screw (1pcs).

Use for Blade 180 CFX.

Description:

• Precision CNC Aluminum Hub and 104T 0.4M Delrin Main Gear.
• Compatible and replacement Stock Plastic Main Gear.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Plastic Main Gear Set: 2.82(g) = 0.10(oz).
• CNC Delrin 104T Main Gear w/AL Hub Set: 3.97(g) = 0.14(oz).

Includes:

• CNC Delrin 104T Main Gear w/AL Hub (1set).

 

 Spare parts for  Advanced Tail Combo (130X869).
- Optimized for weight and durability.

Included:
- CNC Delrin TPS Linkage (1set).

The CNC Hardened Steel Tail Shaft/Hub set is designed with lock pin to improve stability, durability and overall tail performance on the Blade 130 X helicopter.

 CNC Landing Gear and Tail Fin Combo (Black-Red) - Blade 200SRX

• Precision CNC Aluminum and Carbon Fiber material.
• Style with decals.
• Compatible and replacement Stock.
• The CNC Aluminum Horizontal Stabilizer Fin Mount is designed to keep increase grip and reduced vibration.
• Lighter weight than Stock Combo: 0.57(g)

Use for Blade 200SRX.
Included:

• 1 x (SKU: 200SRX721-) CNC Landing Gear Set
• 1 x (SKU: 200SRX816) CNC AL Horizontal Stabilizer Fin Mount Set
• 1 x (SKU: 200SRX854-) CNC Tail Fin Set

Description:

• Precision CNC Aluminum and Carbon Fiber.
• Style with decals.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Plastic Landing Gear: 2.42(g) = 0.085(oz).
• CNC Landing Gear Set: 4.20(g) = 0.148(oz).

Includes:

• CNC Landing Gear (1set).

Hardware:

• (SKU: 225005W-10) 2.2x5.0x0.5mm Steel Washer (4pcs).
• (SKU: M1.6x4PH-10) M1.6x4mm Pan Head Screw (4pcs).

CNC Landing Gear Set (Black-Red) Blade 200SRX/S

Description:
Material: Aluminum alloy and 3K Pure Carbon Fiber.
Hardware: Steel and Stainless Steel.
Style with decals.
Optimized for weight and durability.

:
Use for Blade 200 SRX.
Use for Blade 200 S.

Weight:
Stock Plastic Landing Gear Set: 6.52(g) = 0.209(oz).
CNC Landing Gear Set: 6.35(g) = 0.204(oz). Lighter weight than Stock: 0.17(g) = 0.005(oz).

Package Included:
CNC Landing Gear (1set).

•  

Lynx Heli Innovations redesign a 180CFX Main Gear Hub that supports Lynx CNC Main Gear.
This option is dedicated to pilot who needs a super precise and reinforced CNC Main gear keeping the lightweight as possible and doesn’t need an autorotation system.
Smooth power transmission and Heavy Duty specification will support your 180CFX need to next level.
We spent time optimizing the design and fly testing to achieve the required strength and resistance with final design without compromise.
We are pilots, and we demand a Heli that can support any over-stress fly condition.

FEATURES:

• Direct replacement of standard 180CFX main gear, useable with standard or upgraded main shaft.
• Techno polymer Precise and reinforced CNC main gear assures best wear resistance and perfect tooth mesh.
• Super precise Main gear concentricity for smooth and silent power transmission
• Reinforced Main gear for the ultimate main gear rigidity and special cut design to increase crash impact resistance.
• FEA (Finite Elements Analysis) assisted, achieve lightweight and maximum strength.

TECHNICAL SPECIFICATION:

• Main Gear Hub Material: Aluminum 7075-T6 Anodized
• Main Gear Material: Techno polymer based POM

PACKING LIST:

1 x 180CFX CNC Main Gear assembled with Main Gear Hub Red

Description:

• Precision CNC Solid Carbon and Aluminum Collar Main Shaft .
• Compatible and replacement Stock.
• Optimized for weight and durability.

Usage:

• Use for Blade 180 CFX.

Weight:

• Stock Main Shaft: 6.61(g) = 0.23(oz).
• CNC Solid Carbon Main Shaft w/AL Collar: 1.61(g) = 0.056(oz).

Included:

• CNC Solid Carbon Main Shaft w/AL Collar (1set).

 

Fusuno CF Landing Gear Blade 180 CFX Goblin style (Neon Orange)

Specification:

• 2 x FUP-B180-LG02-CFOR CF Landing Gear Blade 180 CFX (Neon Orange decal)
• 1 x FUP-180ALS01 Aluminum Landing Skid mount (rear)
• 1 x FUP-180ALS02 Aluminum Landing Skid mount (front)
• 4 x PHS-1604 Pan head screw M1.6x4