TX-RX Batteries

Sanyo eneloop Transmitter 8 cell NiMh Battery Pack AA - Flat at Graupner / JR plug-in system (9,6V-2000mAh)
 

•   eneloop transmitter battery of size AA - Flat / Graupner / JR plug-in system
•   Can be used straight after purchase and has a high performance
•   Long shelf life with no loss of energy and can be used everywhere
•   Cost effective in purchase and usage
•   Environmental friendly and easy to use

Product Features

High efficiency Low self-discharge Can be charged with the conventional NiMH-chargers
Dimensions: (L x H x W) 115 x 52,5 x 14,5 mm
Content: AA 8 pc(s) - Flat,GraupneR/JR plug
Capacity: 2000 mAh

What is exactly eneloop?

Eneloop is a combination of a rechargeable and a disposable battery the next evolutionary step for batteries into the 21st century.
SANYO can ship the batteries to Amazon in an already charged state, without losing its power, because of it very low self-discharge.
This means that you are purchasing an already charged battery. Eneloop is as user-friendly as a disposable battery. Once charged, it keeps its charge
for up to 6 to 12 months - (90 per cent of the charge after 6 months, 85 per cent after 12 months) In contrast to a disposable battery,
eneloop can be charged up to 1000 times, thus eliminating the waste of 999 disposable batteries. Using eneloop rechargeable batteries really does pay off.
Considering the cost of the eneloop battery, compared to a disposable battery, plus cost for the charger and the energy consumed by the charger,
The investment for one eneloop returns easily after a few charging cycles. Now there's an end to this spending.

What is the difference between the "old" and the "new" improved eneloop?

1. An extra of 500 charging cycles - instead of being rechargeable 1000 times, the new eneloop is even rechargeable up to 1500 times.

2. Improved self-discharge. Even though the self-discharge of the old eneloop was already very impressive, you can store
the new eneloop for 3 years and still it will retain 75% of its capacity.

3. You need a battery, which is reliable even when having cold temperatures? Before eneloop was suitable for temperatures as low as -10°C - now even until -20°C

Etronix 150A Watt Meter & Power Analyser

Helps to prevent peak currents damaging battery, ESC's, motor, wiring and connectors.
Set cut off voltages, check battery capacity & health.
Confirm proper battery charger operation.
Measure receiver and servo current to determine if a UBEC is needed.

Specifications:

• Operates from 4.8-6.0v
• OV with potential auxiliary battery
• Measures 0-150A resolution 0.01A, 0-60V resolution 0.01V, 0-6554W resolution 0.1W, 0-65Ah resolution 0.001Wh, 0-6554Wh resolution 0.1Wh
• 16x2 backlit LCD display
• Dimensions: 85x42x25mm
• Weight: 82g

 Replacement battery 3200 mAh for JETI DC/DS-16.

Li-Io transmitter battery 1s4p 14.000 mAh

with mounting kit for VBar Control EVO

Li-Io transmitter battery 1s4p 14.000 mAh

with mounting kit for VBar Control Touch

• Eneloop by Panasonic is the next generation of environmentally friendly batteries.
• Pack of 4 Pre-Charged (Ready to use) AAA 930mAh Ni-MH Eneloop Pro Rechargeable Batteries.
• Charge up to an impressive 500 times, with an 85% capacity after 1 year.
• All Eneloop batteries are pre-loaded with environmentally friendly solar energy and ready for use immediately after purchase.
• Ready-to-use for every day use, these Eneloop Lite batteries come pre-charged for your convenience. Designed for high drain devices.

RadioMaster 5000mah 2s Li-ion pack is the perfect battery for your receiver, safer as Lipo, stronger and bigger capacity. but as well can be used for TX16s tx lipo
Offering longer run times and safer use when compared to Li-poly batteries. Li-ion batteries typically offer higher energy density and are well suited to lower current draw applications.

The RadioMaster 5000mah pack coupled with the internal charging capabilities of the TX16s offer convenience and peace of mind charging for hours of flying enjoyment.

Our battery includes an XT30 output plug that is the ideal length for use with external modules such as the TBS Crossfire.

Specifications:

• Capacity: 5000mah
• Watt Hours: 37wh
• Voltage: 7.4v
• Cells: 2 x 21700 Li-ion 3.7v 18.5Wh
• Connector: JST-XH and XT30
• Weight:150g
• Size: 72mm x 42mm x 22mm
• Charge current: Max 2amp

This New Backup Guard II is much stronger than its predecessor, with many new features as well!

One new extraordinary feature is the Charge Mode. This means that the Backup Guard II can charge up the Backup Battery, with balancing, while it is operating. Charging rate will be 0.5A. This means you will no longer need to charge the Backup Battery ever again!

The Backup Guard II is now only the “Power Board” and you can connect your own size of 2s Lipo with JST-XHR Connector.

The Backup Guard II provides DC 5V with 10Amp Output, which is enough to land the aircraft if the ESC/BEC has some failure.

The Second-generation of Backup Guard II has 4 LED that will indicate the status.

Charging mode.

BEC lower than 5.5V.

Specifications

• Weight : 10grams (without battery)
• Dimension: 44mm x 25.2mm x 10.5mm
• Li-Po inpit: 2S/7.4V (500~1000mah)
• Output: DC 5V/ 10 Amp Continues Current.
• Charging Plug: JST-XHR

The Backup Guard II is now only the “Power Board” and you can connect your own size of 2s Lipo with JST-XHR Connector.

Product information "Transmitter battery Panasonic Eneloop AA 8-cube 9.6 / 2000 Futaba"

Panasonic ENELOOP - The whole new way for batteries Benefits

• can be used immediately after purchase
• high performance
• long shelf life without loss of energy
• (very low self-discharge!)
• universally applicable
• > cheap to buy and use
• environmentally friendly
• easy to use

Specifications:

System: NiMH battery
Connection: Futaba / Cube
Voltage: 9.6 volts, capacity: 2000 mAh
Size: HR-3UTG / Mignon / AA / LR6 / UM3

Extremely slow self-discharge rate maintains 75 percent of capacity after 3 years of storage.
Can be charged up to 1,500 times (including partially) without experiencing memory effect.

Rechargeable up to 1500 times. 

Incorporating new technologies for material, manufacturing method and structure developed through the knowledge gained since the first release of eneloop the number of times a battery can be recharged has been increased by the factor 1.5 to approximately 1,500 times compared to the conventional models. With the ability to recharge the battery more times, the new “eneloop” is both more economically competitive and enhanced in environmental awareness as it means the amount of overall battery waste will be reduced.

Ready to use even after 3 years of storage.

Rechargeable batteries typically have a self-discharge characteristic which gradually reduces charged energy over time. This is considered the downside of typical rechargeable batteries. It renders them inconvenient since they can not be used immediately after being purchased, requiring the batteries to be charged to start using them and recharged if they have been left on the shelf for a period of time. Since eneloop batteries have a low self-discharge rate, they are pre-charged and usable immediately after purchase like dry cell batteries. The new eneloop battery continues this tradition by using SANYO’s original “super-lattice alloy” for negative electrode material and improvement of materials and structure, a fully-charged “new eneloop” battery can maintain approximately 75% of charged power even after 3 years, ensuring that power is available when needed.

VBar Control Transmitter Battery 1S-6000mah