Align T-Rex 700 Nitro

Use for T-REX 700X / 700L / 700E / 700N

Content

• 3x 700 Tail Drive Gear Spacer (0.3) (12x15x0.3mm)

Use for T-REX 700E DFC.

Specification:

Canopy mounting bolt x 4(6x14.5mm)

Socket screw x 4(M3x8mm)

Suitable for T-REX700DFC.(H70089A)

6061-T6 Aluminum alloy material and CNC processed.

Specification:

Metal Main rotor holder arm x 2

M3 CNC socket collar screw x 2(M3x24mm)

Socket collar screw x 4(M3x6mm)

Washer(Φ3xΦ4.8x0.3mm) x 2

Weight:20g

Use for T-REX 700 / 760 / 800 with Three-Blade Rotorhead

Content

• 1x 700E Three-Blade Rotor Housing (17x22.9x46.5mm)
• 3x 700 DFC Head Damper (10x17x7mm)
• 3x 700N Feathering Shaft Washer (10x16x1mm)
• 2x Socket button Head Collar Screw (M4x24mm)
• 2x M4 Nut

Suitable for T-REX 700 / 760 / 800 with Tri-Blade Rotorhead
6061-T6 Aluminum alloy material and CNC processed

Content

• 1x Three-Blade CCPM metal swashplate set
• 1x Long Linkage ball (M3x4) (5x28mm)
• 1x Linkage ball D (M3x3.5) (5x9.3mm)
• 5x 700N Linkage ball B (M3x4) (5x12mm)

Use for T-Rex 700 / 760 / 800 with Three-Blade Rotor Head

Content

• 1x 700E Tri-Blades Control Arm Set
• 2x Washer
• 2x Socket Screw (M3x10mm)

Use for T-REX 700 / 760 / 800 with Tri-Blade Rotorhead

Content

• 6x 700E Tri-Blades Head Feathering Shaft Screw

6061-T6 Aluminum alloy material and CNC processed.
Use for T-REX 700 Nitro DFC.

Specification:

• Frame mounting bolt x 1(Φ5.5x47mm)
• Frame mounting bolt x 1(Φ6.5x47mm)
• Canopy spacer x 2(Φ4.8xΦ11x22mm)
• Canopy support x 2(Φ3xΦ5xΦ6.5x7.3mm)
• Socket screw x 2(M3x14mm)
• Socket screw x 2(M4x16mm)
• M4 Washer x 2(Φ4xΦ10x1mm)

Use for T-REX 700 Nitro DFC.

Carbon bottom plate x 1(2.5mm)

Use for T-REX 700.

Must with H7NT004XXW 700N DFC Torque Tube.
H7NT004XXW Carbon Tail Control Rod Assembly.

Tail boom x 1(Φ21.5x800mm)

 Use for T-REX 700 Nitro DFC.

Specification:

• Carbon main frame(R) x 1(2.0mm)
• Bearing mount x 1(Φ9xΦ15x4.5mm)
• Bearing MR95ZZ x 1(Φ5xΦ9x3mm)

Use for T-REX 700 Nitro DFC.

Specification:

• Carbon main frame(L) x 1(2.0mm
• Bearing mount x 1(Φ9xΦ15x4.5mm)
• Bearing MR95ZZ x 1(Φ5xΦ9x3mm)

Use for T-REX 700N DFC.

Specification:

Tail Control Guide × 1

Tail Control Guide sleeve × 1(Φ5xΦ6x35mm)

Carbon Tail Control Rod sleeve × 2(Φ2.6xΦ6x11mm)

Carbon Tail Control Rod × 1(Φ2xΦ5x778mm)

Linkage Rod C × 2(Φ2.5x23mm,M2.5x8mm)

Socket button head self tapping screw × 1(T4x10mm)

700NFL Ball Link × 2

 Use for T-REX 700 Nitro DFC.

Specifications:

• Metal clutch bearing block(L) x 1
• Metal clutch bearing block(R) x 1
• Hex mounting bolt x 2(Φ5.5x60.9mm)
• Scoket screw x 2(M3x8mm)
• Socket button head collar screw x 4(M3x8mm)
• Bearing 6800ZZ × 2(Φ10xΦ19x5mm)
• Bearing 695ZZ C2 × 1(φ5xφ13x4mm)
• M3 Nut × 2

Use for T-REX 700 Nitro DFC.

Specification:

Engine fan cover(L) x 1(157.5x29.3x111mm)
Engine fan cover(R) x 1(157.5x29.3x111mm)
Hex mounting bolt x 2(5.5x47mm)

Use for T-REX 700 Nitro DFC.

Specification:

Front frame brace x 1

Rear frame brace x 2

Switch mount x 1

6061-T6 Aluminum alloy material and CNC processed.

• Use for T-REX 700 Nitro DFC.

Specification:

• Front frame mount x 2(13.5x18x51mm)
• Socket button head collar screw x 8(M3x8mm)

 

 

Use for T-REX 700 Nitro DFC.

Specification:

Metal bearing holder x 2
Bearing 6901ZZ x 2(Φ12xΦ24x6mm)
Socket button head collar screw x 8(M3x8mm)

Use for T-REX 700 Nitro DFC .

Specification:

Receiver mount x 1
Socket button head collar screw x 6(M3x8mm)
Aluminum Hexagonal Bolt x 4(Φ5.5x47mm)

Use for T-REX 700 Nitro DFC.

Specification:

Tail boom mount(Left) × 1(109x57.5x25.5mm)
Tail boom mount(Right) × 1(109x57.5x25.5mm)
Hex mounting bolt × 4(5.5x47mm)
Socket screw × 1(M4x8mm)
Socket button head screw × 8(M3x8mm)

Align 700N Carbon Fiber Blades

Use for:

• T-REX 700N/700XN

Specifically designed for a nitro helicopter to provide superior flight stability, and enhance the power for better control.
A new blonde yellow layering paint scheme creates a stylish look.

Specifications:

• Carbon fiber material.
• Shape: Symmetrical wing
• Length:700x60x8.05mm
• Width:14mm
• Shaft Diameter:5mm
• Weight:Approx 360g/set

Description:

Use for:

• T-REX 700X

Content:

• 1x Receiver Mount
• 1x 700N Aluminum Hexagonal Bolt (2.5x60.9mm)
• 3x 700X Aluminum Hexagonal Bolt (2.5x36mm)
• 1x Socket Button Head Self Tapping Screw (T3x8mm)
• 2x Socket Button Head Self Tapping Screw (T3x12mm)
• 4x Socket Collar Screw (M3x6mm)
• 2x Socket Screw (M3x10mm)
• 2x Socket Button Head Self Tapping Screw (T2.6x6mm)

Use for T-REX 700 Nitro Pro / 700E.

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

700N Front drive gear assembly x 1

700N Short umbrella gear (24T) x 1

700N Long umbrella gear x 1

Align DS825M High Voltage Brushless Servo

Designed specifically for helicopters, utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.
Rudder servo with 0.02sec/60° ultra high speed response, pushing the extreme.
Utilizes brushless motor design for fast speed, high efficiency. And with the absence of brush wear, the longevity of servo is greatly increased.
Supports 8.4v high voltage to provide optimal speed and torque performance of the brushless servo.
Designed specifically for helicopters, with highest specifications on the market: 0.02sec/60°ultra fast speed and 12.5kg-cm monstrous torque, allowing helicopter to perform with faster and higher precision.
Ultra high signal resolution for excellent precision and smoothness.
Hardened high strength superalloy gears that increase the lifetime.
Brand new high voltage brushless servo equipped new CNC machined aluminum case, not only exhibited top of the line servo aesthetics, but also combine heat sink function and best protection for the servo.
Supports both analog and digital control signals.
Suitable for T-Rex 550/600/700/800 rudder use.

Specifications:

• Stall torque: 10.0kg.cm(7.4V)
• Stall torque: 12.5kg.cm(8.4V)
• Motion speed: 0.03sec/60°(7.4V)
• Motion speed: 0.02sec/60°(8.4V)
• Rating voltage: DC 7.4-8.4V
• Temperature range: -20°C~+60°C
• Dimension: 40 x 20 x 39 mm
• Weight: 72g

Accessories:

• DS825M High Voltage Brushless Servo x 1
• DS615/655 Servo Arm Set x 1
• Socket Botton Head Screw x 4(M2.5x10mm)

 

This is a pack of twelve Align 700 Ball Links HN7058

12PCS Ball link-Black (5X20.5mm)

1PCS  Elevator ball link

Specification:

Linkage ball A (M4x5) x 2(5x24mm)
Linkage ball B (M3x4) x 15(5x12mm)
Linkage ball C (M3x3.5) x 9(5x8.5mm)
Linkage ball C (M2x5) x 1(5x10mm)

M3 CNC socket collar screw × 4 (M3x24mm)

Weight:6.9g

This is a replacement Align Clutch Liner, and is intended for use with the Align Nitro helicopter.

Clutch liner x 2 (1x10x160mm)

Description:

• 6061-T6 Aluminum alloy material and CNC processed
• Use for T-REX 700E / 700E F3C / 700N
• Use with 700 New Designed Main Rotor Head Assembly HN7114A

Content:

• Metal SF mixing arm x 2
• Socket button head screw (M3x12mm) x 2
• Linkage ball C (M3x3.5) (5x8.5mm) x 4
• Bearing 683ZZ (3x7x3mm) x 4
• Mixing arm bearing Collar (3x4.8x1.5mm) x 2
• Washer (3x4.8x0.3mm) x 4

Description:

• Use for T-REX 800 / 700 Nitro Pro / 700E
• Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
• Must use with:
  • 700 Metal Tail Rotor Holder (H70T001XXT/H70T001AXT)

Content:

• 1x Tail rotor shaft assembly
• 1x Long umbrella gear

Description:

• Suitable for T-REX 700E / 700N / 700 F3C / 800E
• Must use with: 700FL Flybarless Rotor Head System H70H002XXT

Content:

• 2x Metal Main rotor holder arm
• 2x Linkage ball B (M3x4) (5x10.5mm)
• 4x Socket collar screw (M3x6mm)

Description:

• Use for T-REX 700N / 700E / 700E F3C
• Must use with:
  • Metal Tail Rotor Control Arm Set (HN7086A)

Content:

• 1x Metal plate (L)
• 1x Metal plate (R)
• 1x Metal tail unit set
• 1x Tail rotor shaft assembly
• 1x Long umbrella gear (12x8.2mm)
• 1x Bushing (12.4x18x10mm)
• 2x Bearing MR126ZZ (6x12x4mm)
• 2x Bearing 6701ZZ (12x18x4mm)
• 2x Screw (M3x26mm)
• 4x Screw (M3x6mm)
• 1x Screw (M3x20mm)
• 6x Socket button head screw (M2.5x6mm)
• 2x M3 special washer (3x8x2mm)
• 1x Vertical stabilizer mount

Description:

• Suitable for T-REX 700X / 700L / 700E / 700N / 800E
• Must use with:
• 700FL Flybarless Rotor Head System H70H002XXT

Content:

• 1x Main Rotor Housing
• 2x Feathering shaft sleeve
• 2x Damper Rubber
• 2x Socket Button Head Collar Screw (M4x24)
• 2x Locking nut (M4)
• 2x M4 Washer

Description:

• Use for T-REX 700E / 700N / 800E

Content:

• 1x 800E PRO Vertical Stabilizer
• 1x Vertical Stabilizer Mount

Description:

• Use for T-REX 700E / 700N / 800E

Content:

• 1x 800E PRO Vertical Stabilizer
• 1x Vertical Stabilizer Mount

 

Align T-rex 700 Newly Linkage Rod Set assembly #HN7121