Transmitters & Radios

FrSky Taranis X9D Plus 2.4GHz ACCST Radio Transmitter Only

This is the FrSky Taranis RC X9D Plus radio system. The radio also includes a Haptic Vibration Feedback System which provides an alternative feedback system to the existing voice and sound. If you are a club member this is a welcome addition without annoying your fellow club members. The Plus also includes a dual color LCD back-lit screen, allowing you to adjust from white to blue. Each radio ships with the newest firmware version to support the new haptic vibration feedback system.

Note: The SWR check of the transmitter antenna is no longer available.

When it comes to possibilities the Frsky TARANIS sets a new standard. FrSky is well known for their frequency hopping ACCST technology, that takes advantage of the entire 2.4GHz band, resulting in excellent range and reliability, they now offer their first full transmitter system.

The TARANIS mixes the  power of the “OPEN TX” open-source software with an unbelievable ergonomic case with 8 programmable switches, two twist knobs and two easy to get to lateral 'slider' pots, and not to mention the ultra-smooth quad bearing gimbals.

The TARANIS utilizes Voice Alerts from an internal speaker, versus just an annoying beeper. For things like; audible Count down timers, low voltage warnings, landing gear down warnings etc., just about anything can be programmed, you can even use your own voice. The SD card slot offers unlimited memory options and a USB port for upgrades even a headphone jack.

One of the best features of the TARANIS is its full telemetry capability, as well as RSSI signal strength feedback, there are 3 different programmable fail-safe modes and receiver lock, so no more crashes due to selecting the wrong model. If you have stock in other brand receivers or BNF’s, no worries the TARANIS has a JR style RF module slot, so you have the option of other brand modules such as the Orange DSM2/DSMX or Open LRS 433mhz module, or pop in another Frsky module to expand the transmitters capabilities even more with duel RF.

When you put it all together, between FrSky ACCST technology and the power of “OPEN TX” software and community, a ergonomic case with ultra-smooth smooth ball bearing gimbals and a large back-lit LCD with a included battery pack. You have versatility and power at an unprecedented value.

Features:

•  Haptic Vibration Feedback System
•  Adjustable Screen colors (White to Blue)
•  Newest Firmware
•  RSSI alarms (warns you of reception problems before it becomes an accident)
•  16 channels (more when combined with external module)
•  64 mixers, 9 flight modes
•  16 custom curves with 3-17 points each, 32 logic switches
•  Self-test of the transmitter antenna
•  60 Model memory (expandable via a SD card)
•  Audio Speech outputs
•  USB and SD card slot for unlimited memory, and firmware upgrades, sound editing.
•  Long range system capable of up to 3 times the range of current systems
•  Quad bearing gimbals that are silky smooth
•  State-of-the-art open source software (open TX)
•  Super low latency for ultra-quick response (9ms)
•  Large back-lit display
•  Real-time data logging
•  Receiver lock (program locked to aircraft)
•  JR Style module bay for additional RF modules
•  Processor: STM32 ARM Cortex M3 60MHz

Specifications:

•  Model name: Taranis X9D Plus
•  Number of Channels: up to 16
•  Operating Voltage Range:6-15v (2s, 3s Lipos are acceptable)
•  Operating Current: 260mA maximum (both RF module and backlit are on)
•  Operating Temperature: -10~60C
•  Backlit LCD Screen: 212*64 Monochrome
•  Model Memories: 60 (expandable by SD card)
•  Compatibility: FrSky X series, D series and V8-II series receivers
•  Stick mode: Mode 2  (Left hand throttle)

Includes: 

1x FrSky Taranis X9D PLUS 2019 ACCESS 2.4G transmitter

1x Neck strap

1x USB cable

The FrSky Taranis X9D Plus 2019 is a redesigned version with additions like an additional momentary button placed on the top left shoulder making it ergonomically friendly for DLG pilots to activate launch mode, and features a program scroll wheel making it even easier to navigate the menus. The upgraded MCU is used in conjunction with a redesigned mainboard that further increases the computing capability and increases the data storage. The upgrades not only improve the running of LUA scripts, it also optimizes overall performance like voice speech outputs.

The 2019 version uses the latest ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency with a highspeed module digital interface. Along with the new spectrum analysis function added to the OpenTX firmware, it is now possible to check the airwaves for RF noise. This version will give you a further improved experience based on the classic Taranis remote control. Additionally, tons of extra upcoming features that ACCESS brings will make this an ideal transmitter for any skill level.

The SE 2019 version is installed with the upgraded switches and M9 hall sensor gimbals and features the addition of a PARA wireless trainer function which makes them compatible with the FrSky Free Link App and AirLink S.

Main Features:

• Classic Taranis form factor design
• Easy launch momentary button
• Program navigation button
• Highspeed module digital interface
• Installed with ACCESS protocol
• Supports spectrum analyzer function
• Supports SWR indicator warning
• Haptic vibration alerts and voice speech outputs
• Supports wired training function
• Supports PARA wireless training function
• Compatible with FrSky Free Link App and AirLink S via mobile devices
• M9 hall sensor gimbal and upgraded switches

Specifications:

• Dimension: 200*194*110mm (L*W*H)
• Weight: 700g (without battery)
• Operating system: OpenTX
• Number of channels: 24 channels
• Internal RF module: ISRMSX9
• Operating voltage range: 6.5 – 8.4V
• Operating current: 130mA@8.2V (Typ)
• Operating Temperature: 10℃ ~ 60℃ (14℉ ~ 140℉ )
• Backlit LCD resolution: 212*64
• Smart Port, Micro SD card slot and DSC Port
• Mini USB interface: supports 2S Libattery balancing charge
• Model memories: 60 models (expandable by Micro SD card)
• Compatibility: ACCST D16 and ACCESS receivers

Package Included:

• Frsky Taranis X9D Plus SE 2019 Version 2.4G 24CH OpenTX Transmitter x 1
• TX strap
• EVA carry bag

Futaba 12FG 2.4GHz FASST Radio TRANSMITTER with Integrated Jeti and Futaba,

This is a custom made , professionally integrated and adapted Jeti system modul, and Jeti box Profi. you can use this radio for any Jeti receiver and Futaba fasst 2.4

THIS Radio was used 2 times,  in perfect condition, with brand new lipo TX battery

Standard  charger included

delivered with TM-14 module, Jeti pre-installed module, Jeti Box profi.

delivered in Carbonite JR case,

-Receiver Not included

With the Futaba T16iZ Super computer remote control you make the affordable jump to the professional class! The new transmitter design with large color touch display and ergonomically optimized shape guarantees perfect operation of the clear transmitter software. The T16iZ Super supports the established transmission modes T-FHSS, FASSTest and S-FHSS.

The R7208SB receiver supports RX-Link and features antenna diversity.

NEW: In combination with the FUTABA SBS-01ML S.BUS Sensor Adapter (available soon) the transmitter supports the MAVLink protocol. MAVLink or Micro Air Vehicle Link is a protocol for communication with small unmanned vehicles. It is a very simple messaging protocol for communication with drones (and between drone parts on board). MAVLink follows a modern hybrid publish-subscribe and point-to-point design pattern: data streams are sent/published as topics, while configuration sub-protocols such as the mission log or parameter log are point-to-point with retransmission.

With the S-BUS/S.BUS2 servo function, all parameters of S.BUS/S.BUS2 servos can be set individually via the transmitter.

The transmitter is fully equipped with 8 switches, 2 rotary encoders and 2 rear-mounted slide encoders. All controls are ergonomically placed for perfect operation during flight. The ball bearing control sticks impress with their precision and unique adjustability. The spring force and the ratchet function can be adjusted from the outside on the joysticks. Each stick function also features digital trim. The Futaba T16IZ is furthermore equipped with an S.BUS and a headphone connection, as well as a trainer/DSC connection.

The transmitter comes standard with powerful software for motorized aircraft, gliders, helicopters and drones (multicopters). The menu navigation is available in 9 languages. Model & telemetry data can be stored and firmware updates for the transmitter can be imported via the SD card reader integrated into the transmitter.

FASSTest System
The T16IZ SUPER transmitter has  adopted the bidirectional communication system "FASSTest". Data from the receiver can be checked in your transmitter. FASSTest is a maximum 18  channels 2.4GHz dedicated system.

Color Touch LCD Screen
T16IZ

SUPER has an HVGA 4.3", full-color, backlit LCD touch screen. The screen is transflective which enables booth indoor and outdoor visibility.

S.BUS2 System
By using the S.BUS2 system, multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.

Model Types

• Multicopter
• Helicopters: 8 different swash plate types are available
• Airplanes: 7 wing types & 3 tail types are available
• Functions and mixers necessary for each model type is set in advance at the factory

Lithium-Ion Polymer Battery
T16IS SUPER is operated by a 7.4V/2000mAh Li-Ion polymer battery.

MicroSD Card (not included)
Model data can be saved to a microSD card (SD: 32MB-2GB / SDHC: 4-32GB). When T16IZ SUPER transmitter software files are released, the software can be updated by using a microSD card update.

Edit Buttons
Two edit update buttons are provided and the operating screen can be immediately "Returned" to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.

Vibration Function
Selects a function that aerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.

Speech Function
A function which allows the system to provide telemetry data audibly. This function can also be utilized with commercial available earphones.

Compatible receivers (as of March 2023):

• R7008SB
• R7208SB
• R7308SB

Package including:

• Transmitter T16iZ Super
• Receiver R7208SB
• Transmitter battery LiPo 2s 2000 mAh
• USB charging cable
• Manual

The new Futaba 18SZ includes an amazing array of features that are sure to please all airplane, helicopter and multirotor pilots. Eighteen channels allow even the most complex of models to be controlled. A large, color LED touchscreen and display simplifies data entry and programming tasks. Additional features include flight conditions, S.Bus servo programming capabilities and several selectable languages. The included Futaba R7008SB FASSTest 8+ channel S.Bus receiver enables bi-directional communication and the use of a variety of Futaba telemetry sensors. The first delivery scheduled at October 2015, orders will be sent our per orders placed.

For many years Futaba have led the way with the ultimate in radio systems, and they have done it again with their new T18SZ.

Packed full of possibilities, the T18SZ includes a Li-Fe battery for extended run times, S-FHSS, T-FHSS, FASST and FASSTest transmission systems, 4.3" colour ultra quick response touch screen, flight conditions, a massive range of mixing and programming options for Aircraft, Gliders, Helicopters and Multirotors, Telemetry, Data Logging, etc, not to mention full 18 channel operation.

Supplied complete with the 8 18 channel R7008SB receiver, the T18SZ is the perfect radio for any serious pilot, and of course the regular software updates provided by Futaba will keep this superb radio up to date.

• Futaba 2.4GHz FASSTest, FASST, T-FHSS, S-FHSS Modulation
• 18 Channel (16 Linear + 2 Digital)
• 30 Internal Model Memory
• SD Card External Model Memory (SDHC is available.)
• Telemetry System (Details Below)
• Voice Message
• Easy Software Updates using SD card
• Stick Calibration
• Ultra-Fast 109mm (4.3") Colour TFT-LCD Touch Screen
• 2 Front Dials
• 2 Side Levers
• 6 Trim Levers
• 8 Toggle Switch
• Long life LiFe Battery (LT2F2100B)
• Antenna Angle Adjustment (90 degree and 3 step Rotation)
• Built-in Speaker
• Earphone Jack
• S.BUS I/F (with Power Supply)
• Trainer PPM 8CH / PPM 12CH / S.BUS (16CH)
• Trainer S.BUS Port
• Adjustable Angle Sticks
• Built-In Vibrator

Basic Program Features

• 15 Character User Names
• 15 Character Model Names
• Condition Name
• Function Setting
• Function Rename (AUX function only)
• Sub Trim (±240 steps)
• Servo Reverse
• Fail Safe
• Battery Fail Safe (All Channels on FASSTest/FASST-Multi/S-FHSS, 3 Channel FASST 7CH)
• EPA (30 - 140% with Limit setting)
• Servo Speed Adjustment
• Trim Setting (Step, Rate, Mode)
• Flight Condition (Maximum 8 conditions)
• AFR (D/R)
• AFR Curve Mode (3 Types)
• AFR Curve Point Number (Maximum 17 points)
• Programmable Mixing (10 per Condition)
• Throttle Cut
• Idle down
• Logic switch (Condition switch only)
• Data editor for S.BUS equipment
• Servo Monitor (with NT and Moving Test)
• 2 Up/Down Timers
• Integral Timer (System Timer)
• Model Timer
• Stick Alarm

Telemetry Options

• Receiver Battery
• Temperature Sensor
• RPM Sensor (Magnetic)
• RPM Sensor (Optic)
• Altitude Sensor (with Vario)
• GPS Sensor (Included Altitude Sensor)
• Voltage Sensor
• Current Sensor
• Voice
• Data Logging    

• T18SZ Mode-1 transmitter
• R7214SB Receiver
• 6.6V LiFe battery & 230V LiFe charger
• Switch harness

• FASSTest-2.4GHz
• Diversity Antennas
• Channels: 10ch (PWM) + S.BUS
• Dual RX-RX Capable
• S.BUS2
• Extra External Voltage Port
• Size: 50.1x36.9x16mm
• Weight: 18g

The T18SZ is a fully equipped 18-channel transmitter that leaves nothing to be desired in terms of transmission reliability, quality, function and usability. The well-known modulations such as FASST, FASSTest and FHSS were supplemented by the T-FHSS transmission technology so that telemetry operation in FHSS mode is now also possible. The menu navigation is clearly structured and can be quickly operated via the large color touch screen. In addition to the familiar functions of the T-18MZ, a multicopter menu and 9-language menu navigation has been added. The integrated SD card slot for storing model data and software updates for future, new applications makes this remote control future-proof. The built-in speaker, as well as the LiFe rechargeable battery incl. Charger complete the package. The high-quality transmitter housing captivates by its processing quality and lies thereby perfectly in the hand. The ergonomically arranged switches and encoders allow fatigue-free operation and their precision is unique in this price segment.

• Futaba 2.4GHz FASSTest, FASST, T-FHSS, S-FHSS Modulation
• 18 Channel (16 Linear + 2 Digital)
• 30 Internal Model Memory
• SD Card External Model Memory (SDHC is available.)
• Telemetry System (Details Below)
• Voice Message
• Easy Software Updates using SD card
• Stick Calibration
• Ultra-Fast 109mm (4.3") Colour TFT-LCD Touch Screen
• 2 Front Dials
• 2 Side Levers
• 6 Trim Levers
• 8 Toggle Switch
• Long life LiFe Battery (LT2F2100B)
• Antenna Angle Adjustment (90 degree and 3 step Rotation)
• Built-in Speaker
• Earphone Jack
• S.BUS I/F (with Power Supply)
• Trainer PPM 8CH / PPM 12CH / S.BUS (16CH)
• Trainer S.BUS Port
• Adjustable Angle Sticks
• Built-In Vibrator

Basic Program Features

• 15 Character User Names
• 15 Character Model Names
• Condition Name
• Function Setting
• Function Rename (AUX function only)
• Sub Trim (±240 steps)
• Servo Reverse
• Fail Safe
• Battery Fail Safe (All Channels on FASSTest/FASST-Multi/S-FHSS, 3 Channel FASST 7CH)
• EPA (30 - 140% with Limit setting)
• Servo Speed Adjustment
• Trim Setting (Step, Rate, Mode)
• Flight Condition (Maximum 8 conditions)
• AFR (D/R)
• AFR Curve Mode (3 Types)
• AFR Curve Point Number (Maximum 17 points)
• Programmable Mixing (10 per Condition)
• Throttle Cut
• Idle down
• Logic switch (Condition switch only)
• Data editor for S.BUS equipment
• Servo Monitor (with NT and Moving Test)
• 2 Up/Down Timers
• Integral Timer (System Timer)
• Model Timer
• Stick Alarm

Telemetry Options

• Receiver Battery
• Temperature Sensor
• RPM Sensor (Magnetic)
• RPM Sensor (Optic)
• Altitude Sensor (with Vario)
• GPS Sensor (Included Altitude Sensor)
• Voltage Sensor
• Current Sensor
• Voice
• Data Logging    

Specification

• Dials:    2
• Memory:Expandable SD/SDHC Card Slot
• Mode:Mode 2 or 1.
• Model Memory:30 (+ SD/SDHC Card)
• Modulation:Futaba 2GHz FASST, FASSTest, T-FHSS, S-FHSS
• Receiver:R7008SB 2.4GHz FASSTest (Inc.)
• S.BUS:    S.Bus & S.Bus2
• Screen:    109mm (4.3") TFT-LCD Colour Touch Screen (Inc.)
• Sliders:2
• Speaker:(Inc.)
• Switches:8
• Telemetry:T-FHSS & FASSTest Telemetry + Voice
• Trims:6
• Battery:FT2F2100B 2100mAh Li-Fe (Inc.)
• Channels:18 (16 Full + 2 Switch)

YOUR T18SZ INCLUDES THE FOLLOWING COMPONENTS:

• T18SZ Mode-2 transmitter
• R7208SB Receiver
• 6.6V LiFe battery
• Switch harness

The Futaba 4PV 4-Channel 2.4GHz S-FHSS/T-FHSS Radio System delivers the best of both worlds for bashers and racers.

The 4PV utilizes Futaba's lightning fast T-FHSS protocol to provide live telemetry data of your vehicle's temperature, RPM, receiver and external voltage levels, without slowing down the response of the transmitter/receiver.

The 4PV is compatible with two T-FHSS receivers and six S-FHSS receivers and can be easily updated via the CIU-2 and CIU-3 interface. This means your 4PV will always be up to date with Futaba's latest technological innovations.

To get the most out of your vehicle and 4PV use the included R304SB T-FHSS receiver.

Other features include audible alerts via audio jack allow you to focus on driving while staying in the know.  Plus, ergonomic adjustments include throttle position, throttle tension, steering tension and 5-optional accessories (not included) that allow you to customize the ergonomics to suit your unique needs and desires.

Features:

• T-FHSS and S-FHSS protocols
• Large backlit LCD screen
• Telemetry functions with logging capabilities and audible alerts
• Six digital trims
• 40-model memory
• 10-character model naming
• S.Bus/S.Bus2 servo programming
• Direct Model Select
• Model Copy/Model Clear
• Alarm tone adjustments
• Fail Safe
• Dial trim step select
• Data transfer/copy
• Firmware updatable via CIU-2 or CIU-3
• Compatible with 2S LiFe batteries, NiMHs, dry cells and other battery options

Specifications:

Transmitter:

• Type: 4-Channel S-FHSS/T-FHSS*
• Includes: 3-Channel R304SB Receiver
• Requires: (4) "AA" alkaline batteries

R304SB Receiver:

• Type: 4-Channel T-FHSS
• Input Power: 4.8V-7.4V
• Dimensions: 1.38 x 0.91 x 0.33 in (35.1 x 23.2 x 8.5 mm)
• Weight: 0.23 oz (6.6 g)

• Included in box
  
• Transmitter
• Receiver r304sb
  

The Futaba FX36 is the flagship among the tray style transmitters and was designed for high level model flying and competition use. This transmitter style is popular across Europe and is often used in pattern and glider flying. This high quality transmitter is built to the highest standard and leaves nothing to be desired in terms of transmission reliability and functionality.

The features and telemetry functions are almost identical to the well-known T18MZ and T14SG transmitters. This set uses Futaba's best quality stick units ST-57 (as used in the T18MZ) to give extremely precise control.

You can transmit on FASST, FASSTest, T-FHSS and FHSS allowing you to pick the right receiver for your model. The menu navigation is clearly structured and can be quickly/easily operated via the large colour touch screen. In addition to the familiar functions of the T18MZ Futaba have added a new multicopter menu and the ability to use up to 9 different language options! The integrated SD card slot allows you to store model data and software updates for future helping to make the FX36 future-proof.

T14SG, T16SZ, T18SZ, FX-22, FX-30 and FX-32 model memories are convertible to FX-36.

The ergonomically arranged switches and encoders allow fatigue-free operation during long flights and the set includes 2 aluminium joystick extensions to adjust to the pilot if needed.

• Professional 18-channel remote control system
• Ergonomic transmitter design
• Professional level stick units (ST-57)
• Extensive telemetry functions (Similar to T18MZ)
• New S.BUS functions
• Model selection, internal memory for 30 models (Expandable via SD card)
• 15 Character model / user names
• Modes switchable between FASST, FASSTest, S-FHSS or T-FHSS
• 9 Language menu navigation
• 4.3" Colour touch screen (480 x 272px)
• Telemetry with voice output via loudspeaker or optional headphones
• 6 Digital trims
• 6 Switches
• 2 Rotary dials
• 2 Linear sliders
• Graphical servo monitor that displays all servo paths with servo test function
• Future proof by updating capability via SD card
• Extensive timer functions
• Vibration alarm
• S.Bus port with power support, for programming and logging S.Bus
• 8 Flight conditions per model memory (like T18MZ)
• 10 Option mixes
• AFR 3 modes (Up to 17 points)
• 13 Wing types, 3 tail types & 8 swashplate options
• Fully equipped helicopter menu with swash ring, governor, servo travel and speed compensation, throttle limiter
• 3 curve modes for gas / pitch, up to 17 points possible
• Fully equipped sailor menu with 13 wing types, 3 tail units
• Extensive mixer selection for gliders and engine models (like T18MZ)
• Freely configurable teacher / student channel assignment

Box Contents

• Transmitter FX36 2.4GHz FASSTest
• Receiver R7008SB 2.4 GHz FASSTest
• Large aluminium case
• Transmitter battery 6.0V 2500mAh Eneloop Pro NiMH
• Transmitter battery charging cable
• Switch with charging socket
• 2 Aluminium joystick extensions (M4 Thread)
• Neutralization stopper
• Screwdriver
• Printed user manual

Required Accessories
NiMH charger

Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology.

It's also compatible with FutabaFASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.

The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more.
Heli pilots will prefer the 14SG's 3-axis gyro support — which makes the 14SG the perfect system for flybarless flight!

The innovations don't stop there. Turn the 14SG over, and you'll see the construction is as rock-solid as any other Futaba system.
It's also very comfortable to use, thanks to rubber grips that help minimize flyer fatigue — an added bonus that pilots will appreciate.

About the 14SG:

• Channels: 12 proportional, 2 switched
• Compatible with FASSTest, FASST and S-FHSS protocols
• FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
• Free user-updatable software
• 30-model memory
• 10-character user naming
• 10-character model naming
• Airplane, helicopter and glider programming
• Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
• SensorTouch™ programming
• SD Card compatibility for external model memory and software updates (SD: 32MB-2GB; SDHC 4GB-32GB)
• Left and right assignable slider switches
• Two assignable rotary knobs
• Six assignable three-position switches
• One assignable momentary two-position switch
• One assignable two-position switch
• Comfortable rubber grips on the sides and back
• Wide top switch spacing
• Adjustable stick tension
• Dual ball bearing gimbals
• 4 vibration warning types
• Home/Exit; User Menu/Servo Monitor buttons
• Audio earphone jack (for telemetry alarms)
• User stick calibration
• Trainer system
• Servo speed adjust
• 5 programmable mixes
• V-tail, Alivator, winglet, motor mixing
• Trim mix
• Logic switch (condition switch only)
• Internal programmer for S.Bus servos
• User menu
• Servo monitor (neutral and moving tests)
• 2 count up/countdown timers
• Integral timer
• Model timer
• Quick model select

Fully Equipped 10 - channel handheld transmitter with integrated telemetry function in 2.4GHz FHSS - T  frequency - hopping technology .
The ideal plant for advanced control of the airplane , helicopter and Multicopter - models , place value on a precise feeling of control .
The T10J allows with your extremely rich features also demanding applications and leaves nothing in terms program-ability almost nothing to be desired. The ergonomically designed transmitter case with known Futaba build quality feels good in the hand and is characterized by conveniently arranged controls .
A 128 x 64 pixels large, back-lit LCD display , with large pixels for better legibility in all light conditions .
The graphically -driven user interface , with the known simple Futaba menu structure makes for easy operation - the menu system can be chosen in 7 languages. The intuitive 3D hot-key allows quick and easy navigation through the menu structure and easy adjustment of all parameters.

Highlights

• T- FHSS 2.4GHz technology
• High interference by rapid frequency hopping modulation (100 times per second . )
• Future-proof (equivalent already the new EU standard of 2015)
• Integrated 32- channel telemetry system with high range
• Telemetry real-time display on a large screen
• Voice output through optional headphones with 3.5 mm jack
• Melody and sound output ( either via internal beeper or optional headphones)
• Vibration Alarm system
• 65 x 34 mm large, back-lit display (128 x 64 dot)
• S- BUS technology for full digital integration of S.BUS servos , S.BUS controllers and sensors S.BUS
• By S.BUS support ideal for helicopter with flybarless systems S.BUS
• Integrated patch antenna for always optimal antenna radiation
• Fully equipped 10 - channel transmitter with 19 controls
• Precision , backlash-free stick with open- stick mechanism
• The stick units for universal mode (Mode 1 and 2) can be user- Changed .
• Supplied with heavy NiMH battery for 10 hours of operation , and charger.

Included:

1 transmitter T10J 2.4 GHz T / S-FHSS
1 receiver R3008SB 2.4GHz FHSS-T
1 Transmitter battery 2800 lixx
1 Charger for the TX battery
1 Switch harness with charge socket
1 User Manual

Other Features:

1. 10 (8 +2) channels
2. Switching from T- FHSS (10 channels ) to S- FHSS (8 Kan) - modulation.
3. T- FHSS Frequency Hopping technology with integrated telemetry
4. A broad channel spread results in high noise immunity and ultra-fast response times for precise , direct control feel .
5. FEC technique that T- FHSS  receiver scan the input signal continuously and apply an intelligent error correction method to
6. 100mW transmit power
7. No reaction speed loss even with heavily occupied frequency band
8. Real - time response - real-time control
9. Excellent range
10. Ultra-fast , direct, continuous digital modulation for the shortest response times
11. EasyLink - extremely simple , fast binding process between sender and receiver
12. Fast and reliable automatic re- binding , even under difficult conditions
13. Intelligent Servo Timing for uniform servo control and prevention of servo delay differences
14. Dual Antenna Diversity - extremely fast switching between two receiving antennas for optimal reception signal quality (depending on receiver)
15. Integrated range check function to check the reach before the start

Futaba T16IZ-SUPER Mode-1/2/3/4 - Transmitter Only

MODE-1/2/3/4:
This transmitter is set on default Mode-2, with the throttle on the left hand stick and elevator on the right stick. But it can be changed in the software to any of the Mode-1/2/3/4 by the user.

FASSTest System
The T16IZ SUPER transmitter has adopted the bidirectional communication system "FASSTest". Data from the receiver can be cheched in your transmitter.  FASSTest is a maximum 18 channels 2.4GHz dedicated system.

Color Touch LCD Screen
T16IZ SUPER has an HVGA 4.3", full-color, backlit LCD touch screen. The screen is transflective which enables booth indoor and outdoor visibility.

S.BUS2 System
By using the S.BUS2 system, multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.

Model Types

• Multicopter
• Helicopters: 8 different swash plate types are available
• Airplanes: 7 wing types & 3 tail types are available
• Functions and mixers necessary for each model type is set in advance at the factory

Lithium-Ion Polymer Battery
T16IZ SUPER is operated by a 7.4V/2000mAh LiPo battery (included) that is charged with an included USB-A/USB-C cable. USB-A Power adapter is sold separately.

MicroSD Card (not included)
Model data can be saved to a microSD card (SD: 32MB-2GB / SDHC: 4-32GB). When T16IZ SUPER transmitter software files are released, the software can be updated by using a microSD card update.

Edit Buttons
Two edit update buttons are provided and the operating screen can be immediately "Returned" to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.

Vibration Function
Selects a function that alerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.

Speech Function
A function which allows the system to provide telemetry data audibly. This function can also be utilized with commercial available earphones.

Compatible receivers (as of MAY 2023):

S-FHSS PROTOCOL:

• R2008GS
• R2008SB
• R2106SB
• R2001SB
• R2000SBM

T-FHSS TELEMETRY PROTOCOL:

• R3001SB
• R3004SB
• R3006SB
• R3008SB
• CGY760R

T-FHSS MONO (NON-TELEMETRY):

• R3206SBM
• R3106GF

FASSTest12 and FASSTest18:

• R7003SB
• R7006SB
• R7008SB
• R7108SB
• R7014SB
• R7208SB
• R7308SB
• CGY760R

The long-awaited successor to the best-selling model “T18SZ”, the new T26SZ is now official!

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts. It is also equipped with a number of new functions, including the new communication system FASSTest 26ch. It is a masterpiece that is comparable to the high-end class, and can be said to be the result of Futaba's many years of accumulated know-how and solid results.

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts.

• It is also equipped with a number of new functions, including the new communication system FASSTest 26ch.
• It can be said that Futaba has accumulated many years of know-how and a solid track record.
• It is a masterpiece that is as good as the high-end class.

Features:

• Sub-display
• Lightweight lithium polymer battery
• USB-C charging
• Game controller function (Flight simulator compatible)
• Fast response non-contact potentiometer
• Highly rigid resin stick
• Stick mode switching function
• Receiver with high gain antenna
• Wireless trainer function

• 2.4GHz FASSTest, S-FHSS/T-FHSS system compatible
• Multi-color monitor lamp
• Replaceable switch lever (replacement switch is optional; compatible switches are SE/SF/SG/SH)
• Left and right slide levers (4 systems)
• 6 systems digital trim
• Color monitor with touch panel
• Edit button
• microSD card slot
• Equipped with LT2F2000B lithium polymer battery for transmitter
• User name registration/character input
• Trainer (wireless)
• DLPH-2 operation mode setting function (new feature)
• Receiver output port setting function (new feature)
• S.BUS servo setting function
• Gyro setting function (compatible models CGY755/CGY760R/CGY770R/GYA553)
• Image
• Sound switch
• Sub trim
• Balance new feature
• Reverse
• Fail safe
• End point (ATV)
• Throttle cut
• Idle Down
• Swash settings (for helicopter only)
• Timer
• Data reset
• Servo monitor
• Condition selection
• AFR (D/R)
• Program mixing
• Sequencer new features
• Aileron differential
• Flap settings
• Aileron → camber FLP
• Aileron → Brake FLP
• Aileron → Rudder
• Air brake → ELE
• Rudder → Aileron
• Camber mixing
• ELE → Camber FLP
• Camber FLP→ELE
• Butterfly
• Trim mix
• Air brake
• Gyro sensitivity operation
• V-tail
• Elbeta
• Winglet
• Ladder → elevator
• Snap roll (for airplanes only)
• Pitch curve
• Throttle curve
• Acceleration (helicopter function)
• Throttle hold (helicopter function)
• Swash mixing (helicopter function)
• Throttle mixing (helicopter function)
• Pitch → Needle (function for helicopter)
• Pitch → Rudder (function for helicopter)
• Telemetry log function

Box contents

• Transmitter T26SZ FASSTest
• R7208SB Receiver
• Transmitter battery LiPo LT2F2000B

The long-awaited successor to the best-selling model “T18SZ”, the new T26SZ is now official!

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts. It is also equipped with a number of new functions, including the new communication system FASSTest 26ch. It is a masterpiece that is comparable to the high-end class, and can be said to be the result of Futaba's many years of accumulated know-how and solid results.

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts.

• It is also equipped with a number of new functions, including the new communication system FASSTest 26ch.
• It can be said that Futaba has accumulated many years of know-how and a solid track record.
• It is a masterpiece that is as good as the high-end class.

Features:

• Sub-display
• Lightweight lithium polymer battery
• USB-C charging
• Game controller function (Flight simulator compatible)
• Fast response non-contact potentiometer
• Highly rigid resin stick
• Stick mode switching function
• Receiver with high gain antenna
• Wireless trainer function

• 2.4GHz FASSTest, S-FHSS/T-FHSS system compatible
• Multi-color monitor lamp
• Replaceable switch lever (replacement switch is optional; compatible switches are SE/SF/SG/SH)
• Left and right slide levers (4 systems)
• 6 systems digital trim
• Color monitor with touch panel
• Edit button
• microSD card slot
• Equipped with LT2F2000B lithium polymer battery for transmitter
• User name registration/character input
• Trainer (wireless)
• DLPH-2 operation mode setting function (new feature)
• Receiver output port setting function (new feature)
• S.BUS servo setting function
• Gyro setting function (compatible models CGY755/CGY760R/CGY770R/GYA553)
• Image
• Sound switch
• Sub trim
• Balance new feature
• Reverse
• Fail safe
• End point (ATV)
• Throttle cut
• Idle Down
• Swash settings (for helicopter only)
• Timer
• Data reset
• Servo monitor
• Condition selection
• AFR (D/R)
• Program mixing
• Sequencer new features
• Aileron differential
• Flap settings
• Aileron → camber FLP
• Aileron → Brake FLP
• Aileron → Rudder
• Air brake → ELE
• Rudder → Aileron
• Camber mixing
• ELE → Camber FLP
• Camber FLP→ELE
• Butterfly
• Trim mix
• Air brake
• Gyro sensitivity operation
• V-tail
• Elbeta
• Winglet
• Ladder → elevator
• Snap roll (for airplanes only)
• Pitch curve
• Throttle curve
• Acceleration (helicopter function)
• Throttle hold (helicopter function)
• Swash mixing (helicopter function)
• Throttle mixing (helicopter function)
• Pitch → Needle (function for helicopter)
• Pitch → Rudder (function for helicopter)
• Telemetry log function

Box contents

• Transmitter T26SZ FASSTest
• R7214SB Receiver
• Transmitter battery LiPo LT2F2000B

Futaba’s new Potless flagship radio, the T32MZ, is another leap forward in performance, precision and control.

With 18 channels as standard - 16 proportional and 2 switched channels - the T32MZ can be used with up to two MPDX-1 Multiprop Decoders (sold separately) to give up to a maximum of 32 channels. When expanded this way, there are 14 proportional channels (as two are used by the Multiprop Decoders), 2 switched channels and a further 16 multiprop channels. Note that multiprop channels have lower resolution to normal proportional channels and they can’t be used in mixed functions. They are perfect for ancilliary and auxiliary functions such as lights, retracts and scale, non-flying functions.

Main Display

The T32MZ has a huge HVGA (640x240 pixel) full colour backlit LCD touch screen. Its anti-reflective construction means it is perfect for indoor and outdoor use.

Sub Display

A first for Futaba, the T32MZ has a colour sub-display at the top of the transmitter for timers and telemetry information.

High Capacity 6600mAh LiPo battery

A high capacity transmitter battery gives extended operation times.

Quad Ballraced Hall Effect Stick Units

Each stick axis is supported by dual ball bearings and uses non-contact Hall-effect sensors rather than potentiometers. The throttle stick ratchet can be adjusted to sprung self-neutral without removing the back of the transmitter, thus mode changing is simple.

Replaceable Switches

The 4 toggle switches can be exchanged for optional two, three or momentary switches to suit the pilot’s preference.

Operating protocols

Can be used on FASSTest/FASST/S-FHSS and T-FHSS protocols.

Includes

• T32MZ Transmitter (Air Version includes ratcheting throttle, Helicopter Version includes smooth throttle)
• R7208SB Receiver
• LT1F6600B Lithium Polymer Battery and AC Adapter Switch Harness
• Tool Box (includes special jig for adjustment)
• Neck Strap
• Transmitter Case


Transmitter Specs:


• Transmitter Frequency: 2.4 GHz band
• Operating System: 2.4 GHz FASSTest/FASST/T-FHSS/S-FHSS System
• Power Supply: 3.8 V L1F6600B Lithium-polymer battery
• RF Power Output: 100 mW EIRP
• Weight (with battery): 1126 g


R7208SB Receiver Specs:


• Size: 38.9 x 25 x 14.5 mm
• Weight: 9g

• 2023 F3A World Championship Lassi Nurila wins using Futaba transmitter.
• 2023 F3C World Championship Hiroki Ito wins using T32MZ.
• T32MZ has undergone minor changes as a commemorative model for winning the F3A & F3C World Championship!
• The casing is premium dark brown, equipped with a new communication system FASSTest 26ch, etc.
• A number of new features have also been added.
• With the numerous know-how that Futaba has accumulated over many years,
• It is a masterpiece worthy of its superlative name, and can be said to be the result of a solid track record that symbolizes winning the world championship.

Specs:

• Sub-display
• Lightweight lithium polymer battery
• Micro USB charging
• Transmitter equipped with GPS
• Non-contact potentiometer
• Highly rigid resin stick
• Stick mode switching function
• New receiver with high gain antenna
• Adopts Windows®CE
• 2.4GHz FASSTest, FASST multi, FASST7ch, S-FHSS/T-FHSS format compatible
• Built-in GPS
• Monitor LED
• Switch lever replaceable type
• Left and right slide lever (S/ST)
• Digital trim
• Touch panel
• Edit button
• SD card slot
• Equipped with LT1F6600B lithium polymer battery for transmitter
• Tool box
• User name registration/character input
• Music playback
• Trainer
• DLPH-2 settings new features
• Receiver settings new function
• S.BUS servo setting
• Servo ID list display new function
• Image
• Sound
• Sub trim
• Balance new feature
• Reverse
• Fail safe
• End point (ATV)
• Throttle cut
• Idol Down
• Swash settings (for helicopter only)
• Timer
• Dial monitor
• Data reset
• Servo monitor
• Condition selection
• AFR(D/R)
• Program mixing
• Sequencer new features
• Fuel mixture (for airplanes and helicopters only)
• Aileron differential
• Flap settings
• Aileron → Camber FLP
• Aileron → Brake FLP
• Aileron → Rudder
• Air brake → ELE
• Rudder → Aileron
• Camber mixing
• ELE → Camber FLP
• Camber FLP→ELE
• Butterfly
• Trim mix
• Air brake
• Gyro sensitivity operation
• V-tail
• Elbeta
• Winglet
• Ladder → elevator
• Snap roll (for airplanes only)
• Multi-engine (for airplanes only)
• Pitch curve
• Throttle curve
• Acceleration (helicopter function)
• Throttle hold (helicopter function)
• Swash mixing (helicopter function)
• Throttle mixing (function for helicopters)
• Pitch → Needle (function for helicopter)
• Pitch → Rudder (function for helicopter)
• Telemetry log function
• Multi-prop function (supports 32ch using optional MPDX-1)

Content:

• T32MZ Transmitter (Air Version includes ratcheting throttle, Helicopter Version includes smooth throttle)
• R7208SB Receiver
• LT1F6600B Lithium Polymer Battery and AC Adapter Switch Harness
• Tool Box (includes special jig for adjustment)
• Neck Strap
• Transmitter Case

Futaba 4PM-PLUS Transmitter with R334SBS receiver

T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:

In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response.
SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.

T-FHSS MINIZ SYSTEM:
By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately.

FHSS MINIZ SYSTEM:
By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to non-Evo Mini-z.

TELEMETRY SYSTEM:
The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.

2.4 GHZ SS RADIO COMMUNICATION SYSTEM:
Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.

MODEL MEMORY FOR 40 MODELS:
Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.

4-AXIS JOG BUTTON:
The (JOG) button can be operated in 4 directions: up, down, left, and right.

ESC-LINK FUNCTION (MC-LINK):
This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.

S.BUS SERVO:
This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.

STEERING MIXING:
Smooth cornering is possible by independent left and right steering servo setting.

BRAKE MIXING FOR LARGE CARS (BRAKE):
Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.

GYRO MIXING (GYRO MIX):
The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.

4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):
This function can be used with crawlers and other 4WS type vehicles.

DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):
ESCs at the front and rear are controlled independently.

CPS-1 MIXING (CPS MIX):
LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.

ANTI-SKID BRAKING SYSTEM (TH A.B.S):
This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.

THROTTLE ACCELERATION (ACCEL):
Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.

THROTTLE SPEED (SPEED):
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.

STEERING SPEED (SPEED):
When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.

RACING TIMER (TIMER):
The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.

FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):
This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.

TRIGGER POSITION CAN BE CHANGED:
The position of the throttle trigger can be moved forward and backward.

TENSION ADJUSTMENT FUNCTION:
The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.

MECHANICAL ATL ADJUSTMENT:
Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.

YOUR T4PM-PLUS INCLUDES THE FOLLOWING COMPONENTS:

• T4PM-Plus Transmitter
• R334SBS Receiver
• Dry Battery Holder
• Mini Screwdriver

TRANSMITTER SPECS:

• T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELS
• COMMUNICATION METHOD: Bidirectional protocol
• MAXIMUM OPERATING RANGE: 100m (Except the MINIT system) (Optimum condition)
• FOR SAFETY: F/S, B-F/S, ID
• TRANSMITTER FREQUENCY: 2.4GHz band
• RF POWER OUTPUT: 100mW EIRP
• POWER REQUIREMENT: (Dry Cell Battery) Penlight x 3 (4.5 V)
• CURRENT DRAIN: 150mA or less
• TRANSMISSION ANTENNA: 1/2λ di-pole

R334SBS Specs:

• T-FHSS SR
• SIZE: 33.9 x 22.3 x 11.3 mm
• WEIGHT: 7.5g
• OPERATING VOLTAGE: DC 3.7-7.4V

Futaba T6K 2.4Ghz FHSS/S-FHSS/T-FHSS 6ch S.Bus Transmitter & R3008SB Receiver Combo

The Futaba 6K has T-FHSS AIR telemetry system. It is a high-performance radio that it has not only Airplane and Helicopter mode but also Multicopter and glider mode. The 6K has a text-to-speech function from audio output connector. So you can make sure of telemetry data safely without take your eyes off from your flying body. It is also equipped with vibrator function to inform you such as voltage drop. The 6K also supports Futaba S-FHSS system receiver. So you can also use R2006GS. *S-FHSS system does not support telemetry function.

System Features:

•     15-model memory
•     Function Voice Telemetry
•     10-character model naming
•     Trims: with storage of digital values
•     Functions: (ATV / EPA) by the end of servo travel adjustment
•     Stroke Servo: 3 settings and exponential function (EXP)
•     4 switches / potentiometer 1
•     Failsafe: adjustable lanes 1-6
•     Mixes planes and helicopters
•     T-modulation FHSS / S-FHSS
•     Stopwatch
•     Offset neutral
•     Trainer Mode
•     Monitor servos
•     Alarm Adjustable battery under multiple voltages
•     Audible and vibrating alarms
•     Port S-BUS

With its 32 channels, the Graupner mc-32 HoTT console transmitter is a high-end transmitter for true professionals and modelers who value maximum safety, stable telemetry, intuitive programming and maximum functionality.

TAILOR-MADE FOR YOUR REQUIREMENTS

The huge range of hardware and software features offers an almost limitless variety. Whether it's functionality and switch assignment, the screen layout that can be customized down to the last detail, or the extensive voice output - you can adapt your transmitter to your preferences and habits. And that without programming knowledge or thick manuals. Fast, easy and intuitive! Flexibility and configurability are the hallmarks of the Graupner mc-32 EX!

FULL CONTROL - FULL FUNCTIONALITY

The Graupner mc-32 EX HoTT comes without additional modules on real 32 channels in the basic equipment! This gives you limitless functionality and control for any type of model. Choose from 5 different model types such as flying models (electric, combustion or turbine powered), helicopters, multicopters, vehicles and boats. Store your different models on each of the 999 model memories. 12 phases (levels) and 16 curve mixers can be programmed globally or phase-dependent.

You need more channels and the switches are running out? The mc-32 EX includes an additional 64 digital switches that can be assigned and controlled with a simple tap, using the widget menu. Create nearly infinite digital switch combinations to control lighting or smoke, turn cranes or water cannons, or just about anything you can think of without running out of switches. If that's not enough, you can add up to 7 more switches by simply plugging them in.

The logic switches (AND, OR, EQUAL, UNEQUAL, AND max, OR max, XOR max, |A|>=|B|, A=B, |A|=B) with adjustable time delay and linear or digital switching output, encoder and combination switches increase the variety of switching and control possibilities enormously. Each of these switches controls the functions you want to realize depending on its switching position or the stick position. You determine how each individual switch is to be named.

BIND UP TO 4 RECEIVERS AT THE SAME TIME

Bind up to four 2.4GHz receivers at the same time and define the distribution of the channels as you like. As an example, one 6-channel receiver can be installed per wing and control the ailerons, airbrakes, landing gear and lights. All that is then required is to route the power supply to the individual wings and you are ready to go. No complicated cable routing or expensive distributor is needed! This provides simplicity coupled with all the benefits of RF redundancy.

PERFECTLY MATCHED HARDWARE

The quad ball bearing stick units and with a Hall sensor resolution of 2400 steps (equivalent to a 0.5us servo pulse change), provide a pure feeling of control over your model. The integrated 3-step switches offer convenient switching of phases (levels), motor, autotrim or other user-definable functions. The power units can withstand bad weather conditions and are easily and comfortably accessible from the back of the transmitter to adjust them to your preferences.

The transmitter can also be equipped with 4D sticks. However, one of the two 4D encoders is then connected instead of the upper roller-shaped encoder in the transmitter, which can be connected to any other free slot instead.

ERGONOMIC HOUSING

You were expecting a completely new design for the new mc-32 EX? The entire Graupner team unanimously decided against it without a long discussion! This is because the design of our console transmitters was created in 2008 by a Swabian design office together with world champion pilots, who paid full attention to the ergonomics of the transmitter. Every switch, every control sits exactly on the millimeter in the perfect position, which was determined in numerous studies with model sport professionals. And for long-time mc users, the new mc also feels immediately familiar in the hand.

The mc-32 EX is encased in a sturdy aluminum frame. The switches, buttons and displays are housed in a high-quality plastic casing that retains its pleasant feel even in extreme temperatures.

FEATURES

32 proportional control channels

64 user-definable digital switches

999 model memories

Extensive voice output

Binding of up to four receivers for channel expansion (max. 32 channels and 64 digital switches). The selected receiver transmits the telemetry data.

Telemetry switchable via channel 16

Servo frequency 10ms or 20ms for analog servos

Model specific, group or global binding mode.

Model types: Model aircraft, helicopter, multicopter, vehicle, boat

12 customizable phases (planes) with 16 free mixers each (192 mixers in total)

8 wing types, 6 delta wing types, 3 tail unit types

Multi-engine control (4)

6 user-definable display pages with numerous selectable widgets

Context-sensitive help texts easily accessible via "?

Servo balancing

8 phase-dependent trim functions and 5 trim types

6 phase-dependent, adjustable clocks

8 phase-dependent quad rate and expo settings

16 phase-dependent curve mixers

8 dual mixers

3 channel sequencers

3 ring limiters

12 combination switches programmable from up to four switches

12 logic switches

12 sensor switches (digital or linear output)

4 snap-roll mixers

8 area and master mixers

8 assignable and configurable system alarms

8 assignable and configurable user warnings

8 assignable and configurable global and phase-dependent encoder announcements each

8 assignable and configurable global and phase-dependent voice announcements each

Vario and control menu with dead zone setting

Real-time wireless setting of receivers, telemetry and flight controllers

Integrated file manager

Maximum safety

Extremely high range

FHSS, frequency hopping over up to 75 channels

Maximum immunity to interference due to optimized frequency hopping, wide channel spread and antenna diversification

Intelligent data transmission with correction function

Range test and warning function

Undervoltage warning

Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional down to 2.5 V)

Numerous fail-safe functions

Highest precision

Shorter response times adjustable (10ms period time)

No additional delays due to module processors. All hopping management is done directly by the 32-bit main processor.

Synchronous servo run by simultaneous control of the servo outputs in blocks of 4 possible

Unique pilot feeling

Largely delay-free control responses due to direct processing

Telemetry evaluation in real time

Wireless instructor/student function

Technical data :

• Channels: 32, 8 of which are trimmable
• Switching functions: 64
• Model memory: 999
• Dimensions approx.: 275 x 260 x 155 mm (without hand rests)
• Weight approx.: 1700 g (with battery)
• Frequency: 2400 ... 2483.5 MHz
• Modulation: 2.4 GHz FHSS
• Transmitting power: 100mW EIRP
• Range: approx. 5000 m
• Power consumption: 500 - 1200 mA
• Operating voltage: 3.6V to 4.35V
• Temperature range: -10 to +55°C

• MC-32 HoTT transmitter
• 9000mAh LiHV transmitter battery
• USB Type-C charging cable
• USB adapter for receiver and sensor updates
• Transmitter belt
• Aluminum case

The mz-32 is centered around you
The Graupner mz-32 is our third generation telemetry radio system that advances RC radios to a level never seen before. With its rich set of hardware and software features, the mz-32 is introducing a new level of functionality where you, the user, can control almost any part of the radio.

Be in control with the mz-32
The mz-32 brings you the power to design your own screens, program your own control logic, filter your own voice notifications and even design the looks of your radio.

Fly smoother and beyond with the mz-32
The Graupner mz-32 is the first radio on the market that provides full 32 channel functions right out of the box! It supports five different model types such as electric, gas or turbine airplanes, helicopters, multirotor, cars and even boats.

It can store and load up to 999 different user models, has 12 flight-phases and 16 curve mixers which can be set global or flight-phase dependent! The hall sensor 4096 resolution quad bearing gimbals provide the smoothest control feel a pilot can experience. The sealed gimbals can weather almost any field conditions and offer easy back-access for adjustment to fine-tune the stick tension the way you like.

The mz-32 has a dual 2.4GHz redundant RF system driving a polarized patch antenna for unmatched signal quality and extended range. The included 9000mAh LiPo battery will provide more than 10 hours of operating time, which makes a long day at the field both possible and fun!

The mz-32 adapts to you
The outdoor friendly 4.3-inch state of the art TFT color touchscreen ensures convenient access to all the mz-32 functions for setting up and managing your models.The highly optimized and fast performing graphical user interface is driven by a high-performance processor making access to menus and functions fast and crisp just like on your Smartphone. The intuitive touch and tap control makes navigation around the menus fast, easy and fun!

The mz-32 is not only fast and responsive but is also fast to load. You will be using your mz-32 from power up in 10 seconds!

Designing your own screen layouts to display information or create menu shortcuts can be done on the fly by simply tapping on the screen.The mz-32 provides over hundred widgets which make up the screens that you like and fit your style for controlling your models.You can create in total six screens that better fit your needs and personal style using the tip of your finger. No programming needed! You can do it all with the mz-32.

One radio for all! German, English, French and Italian language is supported with more languages to come all in one radio!

More channels more control for you
With 32 channels the mz-32 provides unlimited functionality and control over any model that you have. You can bind up to four 2.4GHz receivers so you can layout and distribute the channels the way you want.

For example, you can have two six-channel receivers for each wing from where you can control ailerons, flaps, landing gear, and lights. Just supply main power to the wing, and you are ready to go.

No complicated wiring or expensive hubs needed! This provides you with a level of simplicity with the benefits of RF redundancy unseen before in the industry.

Still need more channels but do not have enough switches to do what you want? The mz-32 now also provides up to 64 digital switches that can be assigned and controlled from the widget menu with a simple tap. Create as many digital switch combinations as you like for turning lights and smoke on or off, turn cranes or water guns or anything else that you need to control without using up your switches.

Switching and control options are further enhanced with Logical Switches (And, Or, Equal, Not), Control Switches, and Combination Switches. Each provides a new level of control to you depending on switch position or stick location.

Voices you want to hear
Need to hear what is going on? The mz-32 provides endless options to generate almost any type of system or telemetry voice notification depending on the state of your radio such as switch positions, flight phase names, warnings, vario information and endless others.

The mz-32 starts communicating with you from the moment you turn it on, informing you if a switch or control is in the wrong position for the selected model. No more surprises from collapsing landing gear, runaway motors or wrong gyro settings. The mz-32 can inform you when needed even when you forgot to bring down your landing gear or are about to run out of range or battery.

Walks of shame are now a thing of the past!

With over 600 installed voices and unlimited voice combinations, you can make almost any voice announcements or add as many as you want using our text to speech editor.

Instant help where you need it
In need of help during setup or when something is unclear? Forget about searching through lengthy manuals or endless web searches! The mz-32 provides support right where you need. Each menu and option has its own context-sensitive answers right on the screen. Just tap the question mark and you will be instantly presented with help and assistance.

Don’t like our help screens? Make or add your own help screens with whatever makes sense to you. The mz-32 is there for you allowing you to do and have the things you like the most.

Connectivity that takes you further
With integrated Bluetooth and Wi-Fi the mz-32 is ready to connect you with the rest of the world! Use your Bluetooth headset to hear voice alerts or music from the built-in music player. It's your choice!

Connect to your wireless LAN to receive notifications about newly released firmware that are instantly downloaded and installed on your radio. Your mz-32 is always up to date with the latest and greatest! The update can also be done by using the included USB cable and the latest firmware which you can always find on our website.

Graupner takes connectivity further with a micro USB port that can charge your radio, access your included 16GB micro SD memory card where screens, models, voice files, music and screen shots are stored.

You can use the USB or DSC port also as a joystick controller for games and flight simulators. Now you can practice flying your model on your favorite flight simulator with the same radio that you use at the field!

The data port on the back can be configured to output a variety of digital signal outputs like SUMD, CROSSFIRE, Smart Box, and more. Adding and using third-party modules such as long-range FPV has never been easier than with the mz-32.

All Graupner HoTT receivers now also support digital single wire output such as PPM, SUMD, and SBUS for more connectivity and better interoperability.

The built-in file manager lets you manage things like voice files, screenshots, and more from wherever you are!

Supported Protocols:

• HoTT-PC
• Smart-Box
• External Monitor
• SUMD
• DSMX, DSM2 (Data Output)
• CROSSFIRE V1/V2

Wireless controllers setup
Computers, wirers, and programming boxes are things of the past! The mz-32 HoTT wireless protocol lets you do everything right on the radio! Need to set up your telemetry, flight controller or reverse the direction of your telemetry ESC or flight controller? Just use the shortcut key on the radio to access any of the receiver connected devices, and you are immediately in business. Do this at home while setting up your model or at the field to fine-tune your settings.

Enjoy the HoTT integration of third-party flight controllers and sensors like Ikon, Spirit, 3Digi, MSH-Brain, SM Modelbau and many more for easy access using only your mz-32 radio. Each of Graupner's HoTT receivers provides this functionality, and there is no need to purchase anything else to use these convenient features.

Train your buddies
Training your family members or friends is as easy as bind and teach! The mz-32 provides a wireless and wired trainer support that can be used with any of our HoTT radios using the DSC port in the back.

You can assign control to any of the active channels depending on your student's level and model capabilities. Passing control is easily done with a flick of a switch.

HARDWARE

• Hall Sensor quad bearing gimbals with 4096 resolutions for smooth and precise control
• Outdoor friendly 4.3-inch TFT color and touch screen
• Redundant dual 2.4GHz RF modules
• Circular polarized patch antenna with adjustable beam angle
• 9000 mAh LiHV rechargeable battery for up to 10 hours of operation
• Micro-USB port for charging, data communication, joystick function or mass storage
• Externally adjustable stick tension and mode selection
• Internal µSD 16 Gb memory card
• Built in Wireless and Bluetooth communication
• DSC socket for external communications (wired buddy box, flight simulators, other)
• Wireless student teacher operation
• Wireless firmware update
• Integrated speaker for voice output and telemetry notifications
• User configurable DSC and data ports (SUMD, CROSSFIRE and others)
• User assignable haptic feedback
• 5 x 3 position switches, 2 x 3 position/toggle switches, 1 x 2 position switch, 4 proportional knobs, 2 x lever controls, 8 assignable digital buttons
• 6 shortcut control and navigation keys

SOFTWARE

• 32 proportional channels
• 999 Model memory
• 4 Receiver binding 10ms or 20ms frame rate
• Model, group or global binding modes
• Model types: Airplane, Helicopter, Multirotor, Vehicle, Boat
• 12 selectable flight modes
• 8 wing types, 6 delta wing types, 3 tail types
• Multi engine control (4)
• 6 user designable widgets dashboards (model specific or global)
• Context sensitive help text
• Airplane auto trim mode
• Text to speech with VDF editor
• Servo balancer & synchronization
• 8 phase dependent assignable trim settings and 5 trim types
• 6 phase dependent configurable timers (Start/Stop, Lap, Lap Trigger, Lap Toggle)
• 8 phase dependent quad rate and expo settings
• 16 phase dependent multi point user mixers
• 8 dual differential mixers
• 3 channel sequencers
• 3 channel ring limiters
• 64 user assignable digital switches
• 12 assignable combination switches
• 12 assignable logical switches
• 12 assignable control switches
• 4 snap roll mixes
• 8 wing and tail mixers and crow/butterfly function
• 9 user assignable and configurable system voice notifications
• 8 user assignable and configurable user voice notifications
• 24 user assignable and configurable control voice notifications
• 8 user assignable and configurable voice notifications
• Dedicated vario and control menu with dead zone control
• Wireless setup of receivers, telemetry and flight controllers
• User configurable MP3 player
• Integrated file manager

• Box contents
  - mz-32 transmitter
  - USB charging cable
  - USB update adapter for receiver and sensor updates
  - LiHV battery 9000 mAh
  - transmitter belt
  - aluminum case
  - Instructions in German, English, French and Italian

Supports dual HDMI 1080P 60fps video input, which can be modified through the QGC interface.
Dual S.bus signal output for simultaneous control of autopilot and pan/tilt cameras.
The integrated digital transmission and image transmission can simultaneously transmit the flight data of the autopilot and the image output by the camera  to the remote controller.
Built-in QGC open source ground station with adaptable apm and px4 firmware for direct flight function.
Independent Mavlink commands camera buttons and scroll wheel channels.
Custom channel button and PWM value assignment.

Technical specifications

Air Unit and Controller hardware information:

Processor: SoC – Pinecone S1 AP: 4 x large core, Cortex A53, 2.2GHz 4 x small core, Cortex A53, 1.4GHz GPU: 4 core, Mali-
T860 SDR: A7 + DSP Storage: Sky: LPDDR3: 1GB Ground: LPDDR3: 2GB Sky / Ground: EMMC: 4GB
Transmission Distance: FCC 20km CE / SRRC 12km Image transmission delay: ≤ 110ms Image transmission: 720p@30fps 1080p@30 / 60fps transmission
Frequency Band: 2.4GHz ISM Receive sensitivity: -99dBm@20MHz BW Interference recovery: < 1s

Air Unit:

Appearance: core board + video daughter board + structure of RF daughter board
Among them, the video daughter board completes the input bridge function of theHDMI signal.
The RF daughter board completes the function of transmitting and receiving signals
M2 (E) connector connection between daughter board and core
Size: 78.5x30x13mm
Micro HDMI x 2: Input for external camera video signals
2 Pin interface x 1:5V-12V power input interface
3 Pin interface x 1:3.3V / 5V level UART interface
4 Pin interface x 1 : Two 3.3V level RC output connectors (S.bus in phase, S.bus inverting or PPM signal output, ground terminal control)
Micro USB x 1: for debugging upgrades, support OTG mode
Keyhole x 1: for frequency and status reset
Indicator x 2: used to indicate the frequency and picture status
MMCX antenna jack x 2: used for signal transmission and ground communication
Signal bandwidth: 20MHz / 10MHz
Power consumption: the average power consumption of the single-sided module is less than 4W

Controller:

Housing: plastic
Dimensions: 217 × 106.5 × 31mm (the whole machine does not contain external antenna and rocker)
Screen: 5.46 inch, 1080P, 16 million colors, capacitive touch screen
Audio: Built-in speaker × 1, built-in microphone × 2
Remote control: rocker × 2, scroll wheel × 1, bottom button × 6, with backlight, top button × 1 (right)
Communication : BT / WIFI / GPS 2.4G map transmission ground
Indicator light: Top tri-color lamp × 2 (left, right)
Interface: MicroUSB×1, TFlash×1 (supports maximum 64G expansion)
Antenna: Orientation (5dBi) × 1 detachable, omnidirectional (2dBi) × 1 detachable
Built-in wifi antenna, built-in GPS antenna, external GPS antenna interface
Power : Built-in 4950 mAh Lipo Battery
Charging : Support micro USB port 5v 2A current charging
Power consumption: The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)

Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3 Carbon Line

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3 Carbon Line RED

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line RED

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-24 transmitter tray carboxylic line dark red Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DC-24 transmitter tray carboxylic line light blue Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DC-24 transmitter tray carboxylic line Multimodee

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DC-24 transmitter tray Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DS-12 hand transmitter multimode Yellow

Reserve the new Jeti Duplex DS-12 transmitter already! Once the station is available, we deliver him from the orders in the chronological order.

The new hand-transmitter by JETI offers the high-quality design in an elegant plastic housing, a large color screen and ball-bearing stick units and non-wearing Hall sensors .
The extremely light weight of about 700g and the unique ergonomics of this transmitter can model the heart beat faster.
Integrated is of course the excellent telemetry system by JETI, can be used with which the transmitter programmed on personal preferences!

Specifications:

• Channels: 8 (up to 12 expandable)
• 2.4GHz RF modules: 1
• 900MHz backup system: Optional
• Color TFT: 3.5 inch, 320x240 pixels
• Stick units with Hall sensors: Yes
• Resolution stick: 4096
• Internal memory: SD card, 8GB
• Free mixers: 5 (up to 20 expandable)
• Stopwatches: 3 (up to 20 expandable)
• Values ​​displayed on the display: 10 (up to 40 expandable)
• Spachausgabe for functions: 5 (up to 20 expandable)
• Alarms: 10 (up to 40 expandable)
• Channels for gyroscopic axes: 1 (up to 3 expandable)
• Phases of flight: 3 (up to 6 expandable)
• Flight phase trims: Yes
• DITEX telemetry values: 16
• Lua extensions: max. 10
• MP3 player: Yes
• Microphone: Yes

Optional equipment:

• Logical switches: 0 (up to 16 expandable)
• Sequencer: 0 (up to 6 expandable)
• Motion sensor: optional
• Audio Player: optional
• Telemetry transmitter: 0 (up to 16 expandable)
• Vibrate: optional
• Speech: optional
• Power Balancer: optional
• Function curves: optional
• Gas Limiter: optional
• Variometer: optional

Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4 RED edition

Jeti DS16 carbonline, Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:

• Jeti Duplex DS-16 Transmitter
• 9CH receiver
• Jeti Transmitter Neck Strap
• Jeti Transmitter Aluminum Case
• 110-230V Wall Power charger
• Tx Battery Li-poly 3200mAh 3.7V (1S2P)
• Mini USB to USB PC Cable
• Instruction book

Jeti DS-24 hand-held transmitter

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti DS-24 transmitter carboxylic line

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti transmitter DS-24 carboxylic line dark orange

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti Duplex - DS16II +REX10 Silver 2.4Ghz Duplex Multimode

900MHz NG receiver system (optionally)

The 900MHz NG receiver system is suitable for the DS-12, DS-16 II as well as the DC-16 II transmitters. It is an independent, second transmission system in a second frequency range. If this system is used, the model can continue to be controlled even if the 2.4GHz band is disturbed (e.g. by radio relay, during copter flights for television broadcasts, etc.). The 900MHz backup system only becomes active when this occurs. So it essentially serves to expand the safety in high-quality models. Of course, this backup system can be activated or deactivated separately for each model. It is always used together with the 2.4 GHz transmission system, not individually.

Transmitter hardware

• Multimode joystick
• Determination of stick positions using Hall sensors (without potentiometer)
• Control path resolution 4096 steps
• color display, backlit
• rotating stick aggregate
• Fully aluminum joysticks / aggregates, adjustable in length, with ball bearings
• internal storage
• integrated LiIon battery for long operating time
• Charger
• Aluminum transport case
• Speech
• headphone jack
• digital trims
• anodized aluminum housing

Transmitter software

• 2.4 GHz DUPLEX EX
• 24 control channels
• customizable menu navigation
• almost unlimited setting options
• almost unlimited number of model memories
• Firmware update via USB
• ultra-fast control reactions
• Power management system for longer operating times
• PC interface
• 4 adjustable model types (airplane / helicopter / functional model; multicopter)
• 8 languages (EN / DE / CZ / FR / IT / PT / SE)

Telemetry functions

• Voice output of telemetry warnings and telemetry values
• Display of telemetry data in real time on the transmitter display
• Record telemetry data
• PC transmission, storage and processing of telemetry values??
• Saving (backup) the model data and transmitter settings on the PC

Delivery contents

JETI handheld transmitter DS-16 II Silver Multimode (delivery state mode 2, control mode very easy to change),

Features

• 24 full control channels
• 3 HF modules (2x 2.4Ghz, 1x 900MHz optional)
• color display
• 4 types of models (surface / helicopter / multicopter / functional model)
• MP3 player
• Telemetry processes up to 64 sensor values
• Voice input commands optional

Transmitter hardware

Multimode joystick

• Determination of stick positions using Hall sensors (without potentiometer)
• Control path resolution 4096 steps
• color display, backlit
• rotating stick aggregate
• Fully aluminum joysticks / aggregates, adjustable in length, with ball bearings
• internal storage
• integrated LiIon battery for long operating time
• Charger
• Aluminum transport case
• Speech
• headphone jack
• digital trims
• anodized aluminum housing

Transmitter software

• 2.4 GHz DUPLEX EX
• 24 control channels
• customizable menu navigation
• almost unlimited setting options
• almost unlimited number of model memories
• Firmware update via USB
• ultra-fast control reactions
• Power management system for longer operating times
• PC interface
• 4 adjustable model types (airplane / helicopter / functional model; multicopter)
• 8 languages (EN / DE / CZ / FR / IT / PT / SE)

Telemetry functions

• Voice output of telemetry warnings and telemetry values
• Display of telemetry data in real time on the transmitter display
• Record telemetry data
• PC transmission, storage and processing of telemetry values??
• Saving (backup) the model data and transmitter settings on the PC

Delivery contents

JETI handheld transmitter DS-16 II Carbon Line Red Multimode (delivery state mode 2, control mode very easy to change), receiver REX 10, transmitter battery installed, charger for transmitter battery, strap and stable carrying case.