T-Motor

Tiger Motor - Carbon Prop Cover - for MN18XX, MN22XX

The new generation of Navigator MN motors are specially designed for industrial drone applications. The new completely enclosed design maintains the lightness of the Navigator MN motors, giving extra winding protection. The water resistance has IP55, which guarantees a correct operation in adverse environments.

The bearings, are Japanese EZO brand, along with mechanically balanced bell, ensure optimal performance and minimal vibration. This is very important in multi-rotors that with aerial cameras.

Strong power ,long service life
• Excellent cooling performance
• Anti-high temperature/Anti-overload
• Dust-resistance/Waterproof/Anti-corrosion

T-motor Newest 8.1KG+ Thrust MN605-S KV170 2Pcs/Set For RC Boat Drone Airplane Aircarft Quadcopter Hexacopter.
Specifications

•     Motor size: ø68.8*39.4mm
•     Stator: Imported silicon steel sheet; Anti-rust treatment; 180° Chigh temperature-resisting coating
•     Configuration: 24N28P
•     Shaft Diameter: IN: 6mm, OUT: 4mm
•     Bearing: Imported 6262ZZ
•     Magnet Level: 150°C high temperature resistance: Level E
•     Silicon Cable: 16WG*150MM
•     Copper Wire: 180°C high temperature resistance: Level H
•     Coil Insulation Test: 500V
•     Centrifugal Cooling Design: YES
•     Rotor Dynamic Balance Standard: <5mg
•     Motor Dynamic Balance Standard: <10mg
•     IP: IP35

Includes

•     4x M3*10 mounting screws
•     2x cover
•     8x M4*12 motor mounting screws

The new generation of Navigator MN motors are specially designed for industrial drone applications. The new completely enclosed design maintains the lightness of the Navigator MN motors, giving extra winding protection. The water resistance has IP55, which guarantees a correct operation in adverse environments.

The bearings, are Japanese EZO brand, along with mechanically balanced bell, ensure optimal performance and minimal vibration. This is very important in multi-rotors that with aerial cameras.

Strong power ,long service life
• Excellent cooling performance
• Anti-high temperature/Anti-overload
• Dust-resistance/Waterproof/Anti-corrosion

Specifications

•     KV: 320
•     Configuration: 24N22P
•     Motor Dimensions(Dia.*Len): Φ68.8×39.4mm
•     Shaft diameter: inner 6mm, out 4mm
•     Weight(g): 316g
•     ldle Current(10)@10v(A): 2A
•     No.of Cells(Lipo): 6S
•     IP: IP55
•     Max Continuous Current(A)180S: 55A
•     Max Continuous Power(W)180S: 1400W
•     Internal Resistance: 30mΩ
•     ESC: Flame 70A
•     Prop: 21 ~ 22 inch
•     Silicon Wire: 16AWG 150mm
  
  Includes
   
• 2x T-Motor MN605S 320KV
• 8x M3x8 Screw
• 8x M4x12 Screw
• 2x Prop Cover

T-motor MN4012 Brushless MultiRotor Motor 4012 motors with 60cm leads.
Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference when you turn them, and hear the difference when the run!

Features:
600mm soft silicone power wires
Sealed Japanese EZO bearings
Short, hardened Japanese steel shaft
0.2mm NdFeB stator plates
Includes 6mm, 8mm and DJI style prop adapter.

Specification

• RPM/V  340Kv
• Number of cells  4~8S LiPo
• Resistance  75mΩ
• No Load Current  1A
• Max. efficiency current  4-10A
• Max. Amps  25A continuous for 180 seconds
• Max Power :  660W continuous for 180 seconds
• Size  44.8x32.5mm
• Weight  128g
• Shaft diameter  4mm

Navigator Series MN4014 330Kv Multicopter Motor-Mounted, never used. delivered without original package!

Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference when you turn them, and hear the difference when the run!

Features:

600mm soft silicone power wires

Sealed Japanese EZO bearings

Short, hardened Japanese steel shaft

0.2mm NdFeB stator plates

Includes 6mm, 8mm and DJI style prop adapter.

Specifications:

•   Model: MN4014
•   Motor size: 44.8L x 34.5D mm
•   Shaft diameter: 4mm
•   Weight: 150g
•   KV(rpm/v): 400
•   Max Power Continuous: 900W
•   Max Current: 30A
•   Max Efficiency Current: 3 - 12A >81%
•   Battery: 4 - 8s LiPo
•   Prop: 13 x 6.5 - 16 x 8
•   ESC: 40A

Tiger Matched Pair props are specially designed for multi-rotors. The matched pair includes 1 CW (clock-wise "pusher") prop and 1 CCW (counter-clockwise) prop made of top quality lightweight carbon fiber. Select these props for the ultimate performance on your multi-rotor platform.

T-Motor's Alpha 60A ESC is perfect for professional applications. Large UAVs demand reliable components and the Alpha has numerous levels of protection to keep your gear safe.

4-6S vector control ESC with enclosed and light-weight design

Specifications

•     Size: 71.3x32.5x15.9mm
•     Weight (Incl. Cable): 62.8g
•     Motor Cable: Silicone wire-deep orange- 16AWG-70MMx3Pcs
•     Power Cable: Silicone wire-red/black-14AWG-175MM
•     Signal Cable: PVC flat cable- 30 core wires-- 2-355MM (white, blank, black/JP 3P male connector)
•     Upgrade Cable: PVC flat cable-30 core wires--3-50MM (black, red, white/JP 3P male connector)
•     Support Voltage: 6S/18-25.2V
•     Cont. Current: 40A
•     Peak Current (10s): 60A
•     Standby Consumption: <= 50mA
•     BEC: No
•     Throttle Pos. Range: 110-1900μs
•     Throttle Refresh Frequency: 500Hz
•     Throttle Response Speed: 50ms

T-Motor Carbon Prop – 18 x 6.1 – Pair

Product Description

One pair (CW + CCW) T-Motor 18″x6.1″ carbon fibre propellers with 6mm middle hole. (T-Motor P18x6.1)

• Longer Flight Time
• 100% Balance
• Higher Loaded Ability
• Lightweight / High-strength

Includes:

• 2 x CF Props, 1 x CW, 1 x CCW
• Felt Cover
• Mounting Kit (Copper Adapter, Cover and 4 x M3x10)

High precision foldable, light and stiff propeller made from carbon.
These propellers are used in order to decrease vibrations and to have a smoother flight .
They benefit from latest T-Motor improvements like the winglets that decreases greatly vortex at the blade extremity.

Set of 2 props CW and CCW

 T-motor 2814, 710kv, developed especially for Multicopters.

Tech Specs

• kV : 710
• Weight : 120gr
• Dimensions : 35x36mm
• Voltage : 3- 4S
• Max Current (3min.) : 21A
• Power: 220W

600mm soft silicone power wires
Sealed Japanese EZO bearings
Short, hardened Japanese steel shaft
0.2mm NdFeB stator plates

Includes radial mount and prop adapter

Specification

• RPM/V  380Kv
• Number of cells    3~6S LiPo
• Resistance    59mΩ
• No Load Current    0.7
• Max. efficiency current    10~24A
• Max. Amps    30A continuous
• Max Power (Watts)  370W continuous
• Size  35x48mm
• Weight  187g
• Shaft diameter  5mm
• Suggested Prop Size  15x4~16x8 (4S), 12x4~14x7(6S)

T-motor Speed controller T40PRO -400Hz, electronic speed controller 40a, pro version, latest Fets

T-series pro ESC has the best performance, it is the super-class product for RC airplane and helicopter and multiroto-copter.

Features :
2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transferred through optical/electrical coupled system to avoid electromagnetic interference.2.6 Perfect governor mode for Multiro-copter.2.7 Wide-opened heat-sink has the best heat dissipation effect.2.8 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.9 User programmable. 2.10 Multiple program methods supported: transmitter stick, Digital LED Program Card, Multifunction LCD Program Box, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

Specification:

• Output:  Continuous 40A, burst 60A up to 10 seconds.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiMH battery.
• Refresh rate of the throttle signal: 50Hz to 432Hz.
• Control Signal Transmission: Optical/electrical coupled system.
• Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.      (BLM = BrushLess Motor)
• Size:  59mm (L) * 27mm (W) * 12mm (H).7. Weight:  29g.

T-motor Speed controller T40PRO -400Hz, electronic speed controller 40a, pro version, latest Fets

T-series pro ESC has the best performance, it is the super-class product for RC airplane and helicopter and multiroto-copter.

Features :
2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transferred through optical/electrical coupled system to avoid electromagnetic interference.2.6 Perfect governor mode for Multiro-copter.2.7 Wide-opened heat-sink has the best heat dissipation effect.2.8 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.9 User programmable. 2.10 Multiple program methods supported: transmitter stick, Digital LED Program Card, Multifunction LCD Program Box, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

Specification:

• Output:  Continuous 40A, burst 60A up to 10 seconds.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiMH battery.
• Refresh rate of the throttle signal: 50Hz to 432Hz.
• Control Signal Transmission: Optical/electrical coupled system.
• Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.      (BLM = BrushLess Motor)
• Size:  59mm (L) * 27mm (W) * 12mm (H).7. Weight:  29g.

T-motor Speed controller T60  ESC60A  400Hz.

• Output:  Continuous 60A, Burst 80A up to 10 Secs.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.  
• BEC:  Pentium-60A: 3A / 5V (Switch mode).
• Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
• Size:  70mm (L) * 31mm (W) * 14mm (H).
• Weight:  60g.

Features:

• Extreme low output resistance, super current endurance.
• Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
• 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters.
• Throttle range can be configured and is fully compatible with all transmitters currently available on market.
• Smooth, linear and precise throttle response.

T-Motor U5 KV400 Motor U-Power Series: Stable, Durable, Powerful.

U-Power Technologies for AUW 8-12KG Multi-copter. Industrial grade, dust proof, water proof.

Unique Side Hole Design ensures swift airflow. Motor cools 2.5 times faster than others. Six holes beveling upward sparkles motor with waterproof and sand-resistant features.

Abnormal Shaft – a special screw is used for stator and rotor installation, avoiding loosiness of circlip.

High-Quality Varnished Wired – imported, oxygen-free copper coil which can tolerate temperature of 180C is employed to enhance short circuit resistance.

High-Standard Silicon Steel Sheet Precision Winding – the precision winding ensures the tightness of coil and slot. It helps reduce the copper lose while improving the utilization. Advanced 0.2mm silicon steel sheet reduces heat and eddy, thus improving efficiency.

Larger Bearing – Lower Noise: Adoption of imported German bearing prolongs the service life to over 1600 hours under trouble-free operation. German bearing enables motor run more smoothly and longer with lower noise.

Propeller Installation (Two Options, Patent Design) – Prop Installation and Traditional Installation.

Recommendation:

Voltage: 6S
Recommended prop: T-Motor CF15*5 / CF16*5.4 prop
AUW: Hexacopter, 9KG; Octocopter, 12KG.

Tiger Motor T-Motor M6 CCW Prop Adapter Set for MN4010 MN4012 MN4014

Tiger Motor T-Motor M8 CCW Prop Adapter Set for MN4010 MN4012 MN4014