Spedix-RC

800TVL Mini FPV Camera 5V Cmos W/Mini Cam Mount

Wide Angle 800TVL Mini FPV Camera with its 1/3" CMOS sensor that has been custom tuned for FPV use. This mini camera provides excellent video quality at low illumination and can be switched between NTSC and PAL as needed.

The provided wiring harness is ready to use and simply plugs into the camera.

Specification:

• Sensor: 1/3" CMOS, 800TVL
• Format: NTSC/PAL
• Horizontal Resolution: 700TVL
• Lens: 2.6mm IR coated
• Field of View: 127° diagonal 160° horizontal (ideal for a fixed camera)
• Input Voltage: DC 3.6~5.5V (powered from VTX)
• Power consumption: 60mA @ 5V
• Operational temperature: -20~70°C
• Connector Type: Mini Molex type plug
• Dimensions: 29 x 24 x 17mm
• Weight: 9.3g

Package Included:

• 800TVL Mini FPV Camera
• Cable
• Scews set
• Mini Cam Mount

Aluminum CNC Main & small Belt Pulley, LOGO500~690/SE/SX Series

The driving gear is made of top quality POM material,
integrated with high hardness of metal and abrasive resistance of plastics.Its shape and position hole benefit from simultaneous manufacturing with precision numerical control machines,
thus high precision and excellent concentricity are guaranteed.The metal rings are CNC precisely machined with 6061-T6 alloy. They are tightly embedded in the POM wheel, and fixed by several screws,
making the parts form a perfect unit with high strength, capable of large load capacity.CNC gear hobbing machine contributes to the high precision of driving gear,
and solves those problems found in stock plastic gear,
such as slippage phenomenon and beating problem.

Contains:

• 1x Main belt pulley
• 1x Steel shaft
• 1x 9T belt pulley

Spedix Carbon Fiber Main Frame Stiffener for Logo 500 / 600 / 600SE

This carbon fiber stiffener can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash.
With multiple point fixation, the carbon fiber plates can help to distribute head impact force to the whole frame and to derease chances of damages in crashes.
The carbon fieber parts are CNC precision cut from light and strong plates.
The kit includes two carbon fiber plates, six set of hex screws and bolts.

Carbon Fiber Tail Fin for Spedix Logo 600 Tail gearbox

Carbon fiber tail fin that can be used together with Spedix Logo 600 series integrated tail box.
Weight: 28 g / 1oz

Spedix Main Frame Stiffener Combo for Logo 500 / 600 / 600SE

This combo can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash.
Metal pieces reinforce connections between landing skids and the main frame by transfering impact to stornger body parts.
With multiple point fixation, the carbon fiber plates can help to distribute head impact force to the whole frame and to derease chances of damages in crashes.
The carbon fieber parts are CNC precision cut from light and strong plates.

This combo includes aluminum (SPX92007) and carbon fiber (SPX93017) main frame stiffener kits, as shown in first photo. Both kits can be purchased seperately.

Neon red Carbon Fiber Tail Fin for Logo 550-600

Features:

• Equipped with external oscillator and flashed with the popular SimonK program for quick response, smooth throttle, low running temperature
• Only high quality electronic parts are used and manufactured in a good practice. The product has been proved to be highly reliable in the market
• Can be installed under motor mount of Spedix S250 arms, does not take any precious space in the central boards, and makes wiring much easier and neat
• Has a bright green LED light to indicate direction of a multirotor

Specifications：

• Input voltage: 2-4S LiPo battery
• Continuous current：12A(Max 18A@10S)
• Dimensions: Φ23x5.5mm (exclude capacitor)
• Weight:13.5g
• Firmware:SimonK

Features:

• Equipped with external oscillator and flashed with the popular SimonK program for quick response, smooth throttle, low running temperature
• Only high quality electronic parts are used and manufactured in a good practice. The product has been proved to be highly reliable in the market
• Can be installed under motor mount of Spedix S250 arms, does not take any precious space in the central boards, and makes wiring much easier and neat
• Has a bright red LED light to indicate direction of a multirotor

Specifications：

• Input voltage: 2-4S LiPo battery
• Continuous current：12A(Max 18A@10S)
• Dimensions: Φ23x5.5mm (exclude capacitor)
• Weight:13.5g
• Firmware:SimonK

Spedix standoff for flight controller board and power ditribution board. Package contains four sets of steel screws, polyamide nylon standoffs, and anodized aluminum nuts.
The total length of the standoff is 11mm, with the hex part of 5mm and screw part of 6mm.

Fits 250-300 series Multicopters

Spedix Adapter for 25mm tail boom -Tail Boom Holder for Logo 600 / 600SE
This tail boom holder can prevent the tail boom rip into the heli body and destroy the plastic main frames in a crash.
CNC precision cut from high strength, light weight aviation aluminum alloy.
 

Spedix Carbon arm cover plate. This part  is covering the screws on ABS arm, for best look.

Spedix Carbon top camera Board. This part used with Dampers on top to mount a second camera such a Mobius, etc..

comes in the set with 4 dampeners.

Features:

• One of the most popular open source multirotor flight controller developed by Open Pilot team
• Redesigned and manufactured by Spedix to improve connectivity. No adapter is required to setup DSM2/DSMX satellites and S.Bus receivers
• Optimized ESC pins directions to make wiring in a neat way. No ESC wires come from the two sides of a multirotor frame
• Assembled in the factory with protection case

Specifications：

• Input Voltage: 4.8-6.0V
• Dimensions:39x39x12mm
• Weight: 14g
• Firmware Version:15.02

Contents:

• CC3D controller with case (1x)
• Cable set (1x)

Spedix Hardened Tail Rotor Shaft for Logo 550SX/600/600SE alternative to 4074 mikado

Set of 2 pcs.

Features

• Direct replacement/upgrade   
• Made of high strength stainless steel

Front camera fixing board for Spedix 250 Series Multicopter.

Carbon frame for Spedix S250AH

Includes top and bottom parts.

Replacement arm of Spedix S250 multirotors. Package contains the plastic arm, screws and screw nuts. The carbon fiber plate mounted on the arm needs to be purchased seperately.

Spedix S250 Multirotor Landing Gears, SET OF 4, hardware included

Features：

• The board can be connected up to six ESCs with pre-soldered 2mm female bullet connectors
• The product has two DC outputs.One is 5V for flight controller, and another one labeled with 12V or BATT is for FPV equipment

Specifications:

• Input: 3-4S LiPo
• Output: 5V@3A and 12V@3A
• Dimensions: 50x50x5.5mm
• Weight:22.5g (excludealuminumplate)

Contents:

• Power distribution board (1x)
• JR style servo cable (1x)

Propellers (4pcs) for Spedix 250
5X4.5 inch, 4 pcs

Spedix S250AH Hexacopter Racer Combo set, including Electronics as per details. Build sturdy 250 hex racer easily with Spedix S250AH set without any soldering.
This set is designed in mind to make learning to build racer drone as easy as 1-2-3. It comes with step-by-step instructions to build and learn drone building

The set includes:

• S250AH carbon frame
• 6 x Spedix 2204 2300kv motor
• 1 x specially designed CC3D controller that can connect directly to a DSM2/DSMX satellite and S.bus port without using an adapter.
• 1 x Spedix Power Distribution Board
• 6 x Spedix 12A round ESC flashed with SimonK
• 6 x 5*4.5 props
• 1 x standoff set for controller and PDB
• 1 x Battery Strap

The set does not include radio controller, battery, charger, video / radio transmitter, and camera

DSM2 Compatible Satellite Full Range Receiver with Sattelite

This DuaLink receiver simultaneously gathers information from two receivers that is processed by patent pending for Spektrum software that combines it to form the most vivid picture of an RF signal.
This dual path redundancy, plus the fact each of the two receivers is located in a slightly different location, exposes each to a different RF environment and creates a bulletproof RF link in all conditions.

Specifications:
Channels: 6 channels
Modulation: DSM2/DSM
Band: 2.4GHz
Voltage Range: 3.5-9.6V

This product is perfectly compatible with JR and Spektrum DSM-X and DSM2 remote controls, including: JR12X, 11X, X9503, X9303/Spektrum DX10t, DX8, DX7s, DX7se, DX6i.

Excellent signal reception: Receiver is equipped with a special antenna with 3dbi gain and an internal 15dB gain amplifier, with strong anti-interference capability and longer signal range.

6CH + PPM: 6 channels plus 1 extra PPM channel, for those who want to fly multiple axes, it is more convenient to get it done in one line.

DSM-X (Supports DSM2)
Input Voltage: 3.5-9.6V
Weight: 12g
Size: 47*24 *14mm

-With a special 3dbi gain antenna, with a built-in amplifier of 15dbi gain.
-Stronger anti-interference, longer distances (up to 2km)
-Supported PPM channel
-No need for additional satellite, more convenient.
-Supported JR Spektrum DSM-X and DSM2 protocols

Spektrum DSM2 DSMX Compatible Satellite Full Range Receiver. works with Spektrum and JR in DSM2/DSMX Modes.

Modulation: DSM2-DSMX Compatible
Band: 2.4 GHz
Dimension: 1.7(L) x 1.5(W) x 1(H) mm
Weight:3 gram
Voltage Range: 3.3V from Receiver

Compatible with multiple flight control NAZA32/CC3D/KK2/F3/Multiwii-APM/V-Bar-5.3

This pair of SunnySky X2204S KV2300 brushless out runner motors  are designed specially for multirotors in 200-300 sizes.
The motor with a bullet prop adapter weights 22 grams.
Recommended to use on a multirotor that weights maximum 250 grams multiplied the number of motors on the aircraft.

Recommended battery: 3S LiPo
Recommended ESC: 10A
Recommended prop: 5x4.3 inch