Sky-Hero Anakin

RKH CNC AL Motor Mount (Red) for Sky-Hero Anakin (1pc)

• Precision aluminum motor mount rings.
• Compatible and replacement the stock parts.
• Optimized for weight and durability.

Use for Sky-Hero Anakin.

Specifications:

• Stock Plastic Motor Mount (1): 7.87(g) = 0.19(oz).
• CNC AL Motor Mount (1): 7.41(g) = 0.18(oz).

 

RKH CNC CF Lower Frame Set for Sky-Hero Anakin   

• 3K pure carbon fiber camera mount.
• Compatible and replacement the stock parts.
• Optimized for weight and durability.

Use for Sky-Hero Anakin.

Specifications:

• Stock CF Lower Frame Set: 7.88(g) = 0.28(oz).
• CNC CF Lower Frame Set: 6.70(g) = 0.24(oz).

RKH CNC CF Motor Mount Side Plate for Sky-Hero Anakin   

• 3K pure carbon fiber motor mount side plate.
• Compatible and replacement the stock parts.
• Optimized for weight and durability.

Use for Sky-Hero Anakin.

Specifications:

• Stock CF Motor Mount Side Plate (2): 19.73(g) = 0.70(oz).
• CNC CF Motor Mount Side Plate (2): 16.14(g) = 0.60(oz).

RKH CNC CF Upper Frame Set for Sky-Hero Anakin   

• 3K pure carbon fiber upper frame set.
• Compatible and replacement the stock parts.
• Optimized for weight and durability.

Use for Sky-Hero Anakin.

Specifications:

• Stock CF Upper Frame Set: 12.16(g) = 0.43(oz).
• CNC CF Upper Frame Set: 11.02(g) = 0.39(oz).

RKH Rubber O-Ring 41x1.8mm

Use for:

• RKH's CNC Advanced Upgrade Kit - Blade 200 QX.
• Sky-Hero Anakin Canopy.
• KDS Kylin 250

Package Included:

• 2 x Rubber O-Ring 41x1.8mm

Sky-Hero Anakin Optional side frames SKH03-280-A Side Frame "Curvy" 0° 6" (Pair)

Sky Hero Anakin Camera Plate

Sky-hero Anakin Arm end front (4pc)

Sky-hero Anakin Arm end Rear 4pcs

Sky-hero Anakin Boom set 4 (280mm) including Plastic parts

Sky-hero Anakin Canopy

Sky-Hero Anakin Fastener screw set

Sky Hero Anakin Front Frame Spacer. These are the spacers installed in the front of the frame. Package includes four spacers.

Sky-hero Anakin Frame spacer rear (4pc)

Sky-hero Anakin Injected motor support (8pc)

Sky-hero Anakin Led (pair)

Sky-hero Anakin LED holder Z spacer (2pc)

Sky-hero Anakin Main frame down lower

Sky-hero Anakin Main frame up

 

Sky-hero Anakin O-ring (2pc)

Sky-hero Anakin O-ring (5pc)

Sky-Hero Anakin Optional side frames (pair) Anakin C, 2 PCS

Sky-Hero Anakin Optional side frames (pair) banana 0° to 10° for Anakin 6 (280mm)

Sky-Hero Anakin Optional side frames (pair) bone 6 0° to 10° for Anakin 6 (280mm)
set of 2

Sky-Hero Anakin Optional side frames (pair) cruizer 0° to 10° for Anakin 6 (280mm)

Sky-Hero Anakin Optional side frames (pair) cruizer 0° to 10° for Anakin 6 (280mm)

Sky-hero Anakin Side frames (pair) 0° curvy for Anakin 6 (280mm)

SKY-HERO CC3D Flight Controller, Special Metal CNC boxed. Specialty For FPV Quadcopters Racer by Sky hero

SKY-HERO PLASTIC RING ANAKIN

Mini PDB sky hero, Connector XT60 comes not soldered, for the option to have it on the pdb or connected with the wire

The compact (12x18mm ) synchronous voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V

Light your Racer. Fits perfectly The new Sky hero Anakin ( you need 2 leds ) and many other quads. Make yours glowing in the dark.

Specs:

• 3 x 3528 LED's on board, means a lot of Light
• Input: 3-4s lipo
• Weight: 0.7gr
• Size: 26 x 7 x 3. m
• Availiable colors: Red / Green / Blue

Pre-soldered 20cm wire

Set inclusive of 1 led. double side sticker for easier attachment is included.

Light your Racer. Fits perfectly any racers, helis, airplaines.Make yours glowing in the dark.

Specs:

• 6 x5730 LED's on board, means a lot of Light
• Input: 3-4s lipo
• Weight: 1.5 gr
• Size: 50 x 9 x 2.5mm
• Color: Red 

Set inclusive of 1 led board
Double side sticker for easier attachment is included.