Sky-Hero

Kit of 6 tubes for Little Six Sky hero Little six

The optional angled/banked motor mounts for the Sky Hero Little Spyder. change the flying angle of the Mini spyder.

Made from black aluminum, CNC

Pack includes 4 banked motor mounts.

This is a special bec for RC FPV camera, to reduce spikes and provide constant voltage

Electronics Package for Sky-Hero Spy Y6, 4S OR 6S setup.

Set including:

• 6 Motors X3 470KV with 3 ceramic bearings, Fully dynamic balanced. with 60cm wires
• 6 Multicopter 40A Flashed-  Speed controller ESC
• 6 Drone propellers 11-14" ( choice of APC/MR/GRAUPNER/ Wood)
  
  This setup is allowing to pickup Load of 2 Kg on top of the Chassis.
  

Mini PDB sky hero, Connector XT60 comes not soldered, for the option to have it on the pdb or connected with the wire

Pancake motors Electronics Package for All drones using Pancake motors such as Sky-Hero Spy, Spyder, 6S lipo

Those combos are for high payloads, recommended for at least 750+ size machines.

Set including:

• Avizar Motors MC4014, 3 ceramic bearings, Fully dynamic balanced.
• Avizar SimonK 40A Flashed- Speed controller ESC
• Multirotor propellers 15-16" ( choice of APC/MR/GRAUPNER/ Wood )

This is PDB base Plate to fit Sky hero Spyder( All models ), this replacement of bottom plate allows clean and weight saving on extra wires, 5 and 12v power converter( build in), easy assembly, perfect grounding of all components.

Special vibration mount for Autopilot with AIR dampers included

Prop Shaft for SKY-HERO Motor 2806

The compact (12x18mm ) synchronous voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V

This is a replacement pack of two Sky-Hero Carbon Propellers. These props are constructed of 2K carbon fiber and BEST for use with Sky-Hero platforms.

Includes: (1) CW 13x6.5 2K Carbon Prop (1) CCW 13x6.5 2K Carbon Prop

Sky hero Anakin Club FPV racer 215mm -5"’’ ARF combo, Our combo delivered with Best components we beleive are on the market today. We beleive that quality assembly can be done by customer, there are a lot of advantages to do so.
See the specs below.

• Anakin club racer Frame kit Xnova 2204-2300Kv motors, esc, props- Included and factory preinstalled.
     Note: if you choose other motors, you will need to assemble the kit yourself, you will receive all components, but not ARF version.
• CC3D Metal Case controller included
• PDB-Bec
• FPV Camera included
• RADIO link AT9 with receiver Sky hero version (white edition ) but not installed

Not included:

• Lipo charger
• Battery 3s 1300-1500 mah
• VTX - optional

Sky hero did it again, with the latest drone technology, you have the possibility to fly the freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strengthened with flat arms.
this was developed with the vision that FPV racers deserve a near-indestructible machine, agile racer they can trust.
Locked in trajectories and customizable.

General specs of Club racer versions.

• Full carbon frame- Crash resistant.
• Innovative abutted A frame design.
• Minimized vibrations distribution, Optimized shock absorption
• 3K 4mm Carbon
• Sandwitched frame plates

• Fully protected electronics
• Optimized Shape, size and frame thickness, delivering outstanding strength-to weight ratio
• Responsiveness- so rigid, that you feel "At one" with your frame.

ESSENTIALS

•     Entirely designed for racing
•     Flat arms conception for highest impact resistance
•     Simplified option for easy components replacement
•     Low drag, for higher speeds
•     Electronics fully protected

KEY FACTORS

•     Premium choice for FPV
•     High wind resistance
•     Super fast

Customer expected to add and program the machine, its not coming pre-programmed

Sky hero Anakin Club FPV racer 215-5’’ ARF xnova 2204 MOTORS

The COMBO version of the small Club Racer allows a total freedom in choosing the right components according to your usage.

Sky hero did it again, with the latest drone technology, you have the possibility to fly the savour the freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strenghtened with flat arms.
this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.

Kit specifications: (Included)

•     Complete Rigid frame - ASSEMBLED
•     Motors & Esc’s XNOVA 2204-2300
•     ESC's one shot 20A ,3-4s
•     Flight controller  CC3D Metal Cased
• Camera- Racer 700 TVL with OSD
• RADIO TX :OPTIONAL
• Battery & charger : Optional ( Recommended Sky hero 3s lipo 60c)

If you choose complete set, you will receive on top of the combo, Radio+ receiver( AT9) , Lipo 3s 60c or alike, Charger, connectors

General specs of Club racer versions.

•     Full carbon frame- Crash resistant.
•     Innovative abutted A frame design.
•     Minimised vibrations distribitution, Optimised shock absoption
•     3K 4mm Carbon
•     Sandwitched frame plates

    Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
    Responsiveness- so rigid, that you feeel "At one" with your frame.

ESSENTIALS

•         Entirely designed for racing
•         Flat arms conception for highest impact resistance
•         Simplified option for easy components replacement
•         Low drag, for higher speeds
•         Electronics fully protected

KEY FACTORS

•         Premium choice for FPV
•         High wind resistance
•         Super fast

Sky hero Anakin Club FPV racer 260-6’’ KIT NAKED frame

Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strenghtened with flat arms.
this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.

Kit specifications:

•     Naked frame- NO Electronics

General specs of Club racer versions.

• Full carbon frame- Crash resistant.
• Innovative abutted A frame design.
• Minimised vibrations distribitution, Optimised shock absoption
• 3K 4mm Carbon
• Sandwitched frame plates

• Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
• Responsiveness- so rigid, that you feeel "At one" with your frame.

ESSENTIALS

•     Entirely designed for racing
•     Flat arms conception for highest impact resistance
•     Simplified option for easy components replacement
•     Low drag, for higher speeds
•     Electronics fully protected

KEY FACTORS

•     Premium choice for FPV
•     High wind resistance
•     Super fast

Sky hero Anakin Club FPV racer 260mm -6"’’ ARF combo, Our combo delivered with Best components we believe are on the market today. We believe that assembly can be done by customer, there are a lot of advantages to do so, you can better verify the quality of assembly, and you also learn how to maintain the product in case needed.

See the specs below.

•     Anakin club racer Frame kit NOT assembled
•     4 x  COBRA 2206-2100KV
•     4 x OneShot / Little bee 20a ESC ( stock dependant)
•     4 x Propeller 6" Hq prop
•     CC3D evo or Atom Flight controller included
•     PDB-BEC
•     Runcam Swift Camera included
•     Battery 3s 1300-1500 mah ( stock dependant)
•     VTX (video transmitter) Included.

Not included:

• Radio Tx & Rx (Radio)
• Lipo charger

Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strenghtened with flat arms.
this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.
Locked in trajectories and customizable.

General specs of Club racer versions.

• Full carbon frame- Crash resistant.
• Innovative abutted A frame design.
• Minimised vibrations distribitution, Optimised shock absoption
• 3K 4mm Carbon
• Sandwitched frame plates

• Fully protected electronics
• Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
• Responsiveness- so rigid, that you feeel "At one" with your frame.

ESSENTIALS

•     Entirely designed for racing
•     Flat arms conception for highest impact resistance
•     Simplified option for easy components replacement
•     Low drag, for higher speeds
•     Electronics fully protected

KEY FACTORS

•     Premium choice for FPV
•     High wind resistance
•     Super fast

Sky hero Arctic white AT9 2,4Ghz 9ch Telemetric Transmitter Only (All modes), receiver NOT included

The AT9 IS A new radio which can be compatible to RC copter, fixed-wing airplane and so on. Meanwhile, the new remote controller makes the first progress towards its outer structure, and everyone will be obsessed with AT9 for the first sight. Namely, there are three three-way switches, four two-way switches, one return switch and four adjustable potentiometers, all of which are in neat arrangement providing both power and elegance sense. The most important thing is, RadioLink AT9 is completely designed in line with human ergonomics, effectively making enthusiasts more comfortable while using it.

In addition, the mini receiver is another progress of AT9. It is said that the receiver is of super mini size, very convenient to install and suitable for playing mini models. What’s more, the receiver is compatible to S-BUS, which can perfectly support multi-rotor aircraft. Due to its small size and light weight, the receiver really reduce much burden for a certain aircraft.it is widely recognized that some remote controller support online upgrade As for AT9, you can reach upgrade just via the mobile phone USB data wire.

Last but not least, RadioLink AT9 owns wonderful vibration alarm. If you are experienced enthusiasts, you must know that traditional alarm can’t be head in relatively noisy environment. Only vibration alarm can make a distinctive warming to protect your aircraft

Both helicopter model and airplane model are available.

2.Function and performance updated with better safety.

3.Faster response.

4.All seven Channels have trim setting function and none interference between one another from channel 1 to channel 6 under CCPM mode.

5. Transmitter hops spectrum while powering on

6.Transmitter will detect whether the current spectrum channel was occupied when its power on, and it will hop to the next one until which it’s not occupied. The receiver will search and match with the transmitter which shares the same identity code.

7.6. Code matches wirelessly

8.Each transmitter has a unique identity code of its own, the receiver will search and bind with the nearest transmitter while pressing the code matching button on it. There is no need to match again in future use once its matching successfully.

9.7. High anti-interference capability

10. Adoption of FHSS technology makes our products have excellent anti-interference capability, and helps the models always be in control easily.

11. 8.High suppression ratio of Adjacent Channels

12. 9 .Fully comply with FCC&CE standards

13. 10.Stable RF range

14. With FHSS technology, its control range reaches 350 meters on ground and 700 meters in air.

15. 11. Throttle on right/left-hand interchangeable.

16. 12. LCD screen, manual programming is available. (Model type ACRO: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve,programmable mix 1,programmable mix 2, flaperon mixing, flap trim, v-tail mixing, elevon mixing and auxiliary function. Model type HELI: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve, normal pitch curve, idle-up throttle curve, idle-up pitch curve, throttle hold, revolution mixing, gyro sensitivity, swash-throttle mixing/ swashplate types and auxiliary function.)

17. 13. Low-battery warning function

18. The low battery alarm continuously beeps and LED flashes when voltage drops to 8.6V. 14.Trainer cable,power charging jack.

Technical Parameters

• Size:17cm*8.5cm*20cm
• Weight:560g (battery not included)
• Transmitting on 2.4G band
• Modulation:FHSS
• Operating system: 2-stick, 7-channel system
• Power supply: 12V battery (8 pieces 5# batteries)
• Current drain: 87mA(Energy Saving)
• MODE 2 ( user changable)
• nO RECEIVER in the kit

This is a pack of two replacement Sky-Hero Battery Straps. These battery straps feature genuine Sky-Hero branded material and are compatible with the Spyder and Spy aircraft. Fit 4-6 s LIPOS

2pcs  in set

Sky Hero Lipo pack 4s 1300mah 65c

Specificications:

• Product Type: Battery Pack lithium polymer (LiPo)
• Capacity: 1300mAh
• Voltage: 14.8V
• Maximum Continuous Discharge: 65C
• Maximum peak discharge (3s): 130C
• Size : 32x28x75mm
• Power Connector: XT 60
• Balancing Connector: JST-XHS
• Number of C load: 1 - 3C Recommended

Picture for ilustrated purposes only

Sky Hero By Gens ace Competition Racing Lipo pack 4s 1800mah 65c

Specificications:

• Product Type: Battery Pack lithium polymer (LiPo)
• Capacity: 1800mAh
• Voltage: 14.8V
• Maximum Continuous Discharge: 65C
• Maximum peak discharge (3s): 130C
• Size : 34 x 29 x 104mm
• Power Connector: XT 60
• Balancing Connector: JST-XHS
• Number of C load: 1 - 3C Recommended

Aluminium made Clamp, for 30mm tubes.

Allows simple installation and access to frame if disassembly needed- your Motor arms will not fall down.

the clamp is 40mm high.

Set of 1 clamp

Sky hero Inertic Mount SPYDER 6 #SKH03-22-1

1 pcs

Material G10

New Sky hero Little Six Bind ready combo delivered NOT-assembled, with motors, esc, props, including the Pixhawk or mini version

With so many brands - why should you choose Sky-Hero?

• Designed with Passion - BY PILOTS FOR PILOTS.
• Designed, Prototype, Tested, Stocked, Shipped & Serviced from Belgium (Europe).
• Used World Wide by both Professional and Recreational pilots.
• We are the Brand of Choice for many Flight Schools.
• Often imitated, but NEVER equalized!
• Sleek, Futuristic and Aerodynamic Design .
• Windy Weather capability.
• Easy to Repair and Customize
• Probably the most Beautiful Drone in the world!

BE PREPARED FOR ENVY!!!

Why choose a LITTLE SIX Bind Ready:

• The Evolution of the original SPYDER SIX ( 580mm size )
• Flight Controller: Pixhawk with gps
• Super strong Carbon Fiber chassis, Powerful Avizar MOTORS
• Powerful and Safer with 6 motors (Upgrade possible to 12 Motors).
• Suitable for Professional and Recreational use.
• Extra Performance (faster!)
• Larger choice of battery sizes. From 4S 3700mAh to 5000mAh
• Awesome Look and Presence in the Air.
• Compact & Foldable Hexacopter (580mm Size).

Included:

Sky hero little six frame

6 Motors/esc/propellers

PDB or pdb wires

Mini pix/apm/ controller

This is a preliminary preorder for Sky hero Little Six frame Kit only. No motors or electronics included.

With so many brands - why should you choose Sky-Hero?

• Designed with Passion - BY PILOTS FOR PILOTS.
• Designed, Prototyped, Tested, Stocked, Shipped & Serviced from Belgium (Europe).
• Used World Wide by both Professional and Recreational pilots.
• We are the Brand of Choice for many Flight Schools.
• Often imitated, but NEVER equalled!
• Sleek, Futuristic and Aerodynamic Design .
• Windy Weather capability.
• Easy to Repair and Customize
• Probably the most Beautiful Drone in the world!

BE PREPARED FOR ENVY!!!

Why choose a LITTLE SIX Bind Ready:

• The Evolution of the original SPYDER SIX ( 580mm size )
• Super strong Carbon Fibre chassis, Powerful Sky-Hero Motors.
• Zenmuse H3-3D Gimbal Ready.
• Powerful and Safer with 6 motors (Upgradable to 12 Motors).
• Suitable for Professional and Recreational use.
• Extra Performance (faster!)
• Larger choice of battery sizes.
• Awesome Look and Presence in the Air.
• Compact & Foldable Hexacopter (580mm Size).

The Sky Hero "Little" Spyder quadcopter is the closest you can get to professional flying in a 450 class frame. The "Little" series brings the same stellar design and award winning quality of the larger professional Spy and Spyder series to the hobby masses.

This set comes with Oversized ESC 40 am for extreme flight conditions and extra reliability

This is a Super combo Including the following components:

• Sky hero Little spyder Kit
• Pixhawk controller ( no gps) with Buzzer, I2C.
• 4 motors Avizar 2312
• 4 esc 40A
• 4 Self tightened propellers 10" APC
• Distribution PDB wires set
• Hardware

Optional items

• GPS for Pixhawk
• Radio SET Sky hero AT9
• Carry Case metal

Carry case, with foam for Sky hero little spyder, however perfectly fits other 450 size machines and also FPV racers

Set of Vynil Stickers for Sky hero Little Spyder Black and White pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  Camouflage pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  Camouflage pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  CARBON pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  USA FLAG pattern. made from High quality Vynil

Sky Hero Long canopy for Spyder 6, Smoke Black color.

Canopy made from Fiberglass, paint in Black

Sky Hero Long canopy Spyder 6, Smoke green color finish.

we always recommending to use the finish as base and not as final color

Sky hero MAIN FRAME SPYDER 6 #SKH03-004

1 pcs

Material G10

Sky hero self tightening propellers for Little Spyder-Little Six 9.4' x 5

Set of 2, 1 CW +1 CCW