Shims-Washers & e-Clips

Aluminium CNC 2.5mm Finish Cap (10 Pcs) Silver Color

Ball bearing Shims 7x10x0.2mm, pack of 10

Preloading your ball bearing system eliminates the extra clearance between the inner race and outer race of the bearing, allowing for smoother mechanical operation. Excessive or insufficient preload, however, can cause more damage than good.

Inner race and outer race bearing shims come in varying thicknesses to help you achieve the right amount of axial preload for your bearings. When installed correctly, bearings shaft shims help prevent misalignment, reduce noise and vibration, improve system rigidity, and extend bearing life. A versatile design also allows use as shaft spacers to align and adjust the spacing between two components.

Ball bearing stainless Shims 20x24x0.5mm, set of 5

Preloading your ball bearing system eliminates the extra clearance between the inner race and outer race of the bearing, allowing for smoother mechanical operation. Excessive or insufficient preload, however, can cause more damage than good.

Inner race and outer race bearing shims come in varying thicknesses to help you achieve the right amount of axial preload for your bearings. When installed correctly, bearings shaft shims help prevent misalignment, reduce noise and vibration, improve system rigidity, and extend bearing life. A versatile design also allows use as shaft spacers to align and adjust the spacing between two components.

Specially made for bearings. this washer is stainless and will fir without extra friction on the bearing.

Size : Inner diameter M3, outer diameter 6 MM, thickness  1MM

Pack contains 10 washers

The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. The three prongs of the E-Clip make contact with the bottom of the groove and provide a shoulder for effective retention of the assemblies.

Standard material: Carbon Spring Steel SAE 1060-109
Standard Finish: Phosphate and Oil Benefits
Cost effective replacement, durable, removable.

Assortment of E-Clips. Pack of 10 pcs, Sizes of #2-2.5-3-4-5-6 ( Size sometimes shown as # symbol )

Those are special bearing Shims with Unique sizes to allow ball bearing clearance and other variety of applications to take up excess space or play.

Ball-Bearing shim rings serve to compensate for tolerances of bearing components without any other further mechanical reworking.

Also to use friction free between bearing and housing.

Size : 10x16x0.3mm
Set of 10 pcs in a bag

Those are special bearing Shims with Unique sizes to allow ball bearing clearance and other variety of applications to take up excess space or play.

Ball-Bearing shim rings serve to compensate for tolerances of bearing components without any other further mechanical reworking.

Also to use friction free between bearing and housing.

Size : 10x16x1mm
Set of 10 pcs in a bag

Those are special bearing Shims with Unique sizes to allow ball bearing clearance and other variety of applications to take up excess space or play.

Ball-Bearing shim rings serve to compensate for tolerances of bearing components without any other further mechanical reworking.

Also to use friction free between bearing and housing.

Size : 12x18x0.3
Set of 10 pcs in a bag

Specifications:

• Corrosive Resistant A2 Grade Stainless Steel.
• Form A Thick Flat A2 Grade Stainless Steel Washers DIN125
• Dimensions (approx) - Inner 2.8mm, Outer 6.75mm, Thickness 0.5mm

Specifications:

• Corrosive Resistant A2 Grade Stainless Steel.
• Form A Thick Flat A2 Grade Stainless Steel Washers DIN125
• Dimensions (approx) - Inner 4.3mm, Outer 8.5mm, Thickness 0.8mm

Specifications:

• Corrosive Resistant A2 Grade Stainless Steel.
• Form A Thick Flat A2 Grade Stainless Steel Washers DIN125
• Dimensions (approx) - Inner 5.3mm, Outer 10mm, Thickness 1.0mm

These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

Also ideal for the precision adjustment of component positions.

Dimensions:

Internal Diameter - 3.0mm
External Diameter - 4.0mm
Thickness - 0.2 mm

Supplied in packs of 5

These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

Also ideal for the precision adjustment of component positions.

Dimensions:

Internal Diameter - 3.0mm
External Diameter - 5.0mm
Thickness - 1 mm

Supplied in packs of 10

These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

Also ideal for the precision adjustment of component positions.

Dimensions:

Internal Diameter - 3.0mm
External Diameter - 5.0mm
Thickness - 2 mm

Supplied in packs of 10

Plain Washers ISO 7089 A2 10x20x2.0mm (10 pcs)

Plain Washers ISO 7089 A2 10x24x2.5mm (10 pcs)

Plain Washers ISO 7089 A2 3x7x0.5mm (10 pcs)

Plain Washers ISO 7089 A2 4x8.5x1.0mm (10 pcs)

Plain Washers ISO 7089 A2 8x16x1.5mm (10 pcs)

Plain Washers ISO 7093 A2 10x30x2.5mm (10 pcs)

Specification:

• 200 HV

Plain Washers ISO 7093 A2 8x24x2mm (10 pc)

Specification:

200 HV

Description:

Includes:

• 10x Shim 4.5 x 5.9 x 0.3mm

Use for:

• Goblin Fireball
• Goblin MiniComet

Description:

Includes:

• 10 x Washer 2,5 x 4,5 x 0,5

Use for:

• Goblin Fireball

Shim Washer Din 988 10x16x0.1mm (10 pcs)

Shim Washer Din 988 10x16x0.2mm (10 pcs)

Shim Washer Din 988 10x16x0.5mm (10 pcs)

Shim Washer Din 988 10x16x1.0mm (10 pcs)

Shim Washer Din 988 8x14x0.5mm (10 pcs)

Shim Washer Din 988 8x14x1.0mm (10 pcs)

Steel Shaft securing Circlip, Spring steel for 8mm Shaft Diameter

set of 10 pcs

Steel Shaft securing Circlip,Spring steel for 10mm Shaft Diameter

set of 10 pcs

Washer 8.4x16x1.5 (10pcs)

Washers set

Agile 5.5 Parts

Align T-Rex 700XN M3 Special Washer-Red

Use for:

• T-REX 700XN

Aluminium alloy material

Content:

• 30x M3 Special Washer (3x8x2mm)

Scorpion HK-22 C-Clip Kit factory replacement C-Clip

The Scorpion HK-22 C-Clip Kit are the factory replacement C-Clip, washers & set screw for all HK-22 Series Helicopter Motors. (Except HK-2206)

Included in the Box:

• 4 x C-Clips
• 4 x Set Screws
• 4 x Washers

Scorpion HK-40 C-Clip Kit factory replacement C-Clip

The Scorpion HK-40 C-Clip Kit are the factory replacement C-Clip, washers & set screw HK-4020, HK-4025, HK-4035 & all HKIII-40 Series Helicopter Motors. (Except HK-4015)

Included in the Box:

• 4 x C-Clips
• 4 x Set Screws
• 4 x Washers