SH Spy-Spyder

Kit of 6 tubes for Little Six Sky hero

Those are the guards to keep the wires safe when folding arms.

the Guards made to protect your esc/motor wires when folding/unfolding the machines.

Guards comes in set of 6 , no need to cut, use 2 pcs per tube .

Guards fit all machines of Sky hero.

Instructions: add some contact glue or silicone glue and insert the guard inside the arm.

Set of 6

Special design, XXL Aftermarket Inertic bottom plate for Spyder.
This inertic mount was created after research and opportunity to improve and ease of use for Mounting, allow easier adjustment  CG of Sky hero Spyder

• Made from 3.0mm Carbon reinforced FRP material, make this mount plate resistant to Shocks, and very rigid.
• Wider : Allows mounting of 2x 6s 5000-6000 Lipos side by side without touching the screws.
• Longer plate : 37 CM - allows perfect CG with or without gimbal, use with 1 or 2 lipo packs
• Forward Side mounting holes: For easy gimbal mounting direct, or on tubes of Xaircraft type
• Back Holes for GPS mounting, or FPV TX.

To use this plate in current Spyder you will need to make some 4mm holes in the bottom plate of Spyder.

The optional angled/banked motor mounts for the Sky Hero Little Spyder. change the flying angle of the Mini spyder.

Made from black aluminum, CNC

Pack includes 4 banked motor mounts.

CNC Aluminum Landing gear T-mount, to connect 15mm Skid tube with 20mm Landing gear.

An upgrade for Sky hero, possibly fit other machines.

Included 1 pc, Red color, with Screws.

Mini PDB sky hero, Connector XT60 comes not soldered, for the option to have it on the pdb or connected with the wire

This is PDB base Plate to fit Sky hero Spyder( All models ), this replacement of bottom plate allows clean and weight saving on extra wires, 5 and 12v power converter( build in), easy assembly, perfect grounding of all components.

Special vibration mount for Autopilot with AIR dampers included

Prop Shaft for SKY-HERO Motor 2806

Purflame  Airbrush Fiberglass Canopy Sky Hero Spy

Be different with our new canopy specially designed for Sky Hero Spy. A whole new look and more visibility for your copter with a cool design at a affordable price. Dont be the same, be different .
Fly it your style.
 
Fusuno canopies are made with highest quality resin and fiberglass material to provide strong but flexible canopies. It helps prevent cracks that is normally seen in other canopies that are using lower quality material. All paints and clear coat are automobile grade provide great look, Great design at bargain price.

The compact (12x18mm ) synchronous voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V

This is a pack of two replacement Sky-Hero Battery Straps. These battery straps feature genuine Sky-Hero branded material and are compatible with the Spyder and Spy aircraft. Fit 4-6 s LIPOS

2pcs  in set

Sky hero Inertic Mount SPYDER 6 #SKH03-22-1

1 pcs

Material G10

Set of Vynil Stickers for Sky hero Little Spyder Black and White pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  Camouflage pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  Camouflage pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  CARBON pattern. made from High quality Vynil

Set of Vynil Stickers for Sky hero Little Spyder  USA FLAG pattern. made from High quality Vynil

Sky Hero Long canopy for Spyder 6, Smoke Black color.

Canopy made from Fiberglass, paint in Black

Sky Hero Long canopy Spyder 6, Smoke green color finish.

we always recommending to use the finish as base and not as final color

Sky hero MAIN FRAME SPYDER 6 #SKH03-004

1 pcs

Material G10

Sky hero Spy & Spyder Motor Mount, White color

Included- 1 half arm

Sky Hero Spy Easy Access Lightened Main Frame

Sky Hero Spyder Canopy stand set

2 x posts (Color can vary per stock, Purple or Black)

3 x canopy rubber grommets

Sky Hero Spyder Wiring Harness - X4 or X8/ Little spy/der

Sky Hero makes it easy when utilizing multiple motor applications with your Sky Hero kit, allowing up to (5) ESC's to be attached to this wire harness. No power distribution board is needed when utilizing this wire set, allowing multiple ESC's to be connected in quick fashion, without fuss.

Designed to be used with Sky Hero's line of ESC's, the Sky Hero ESC's feature pre soldered bullet connectors on the power terminal allowing the ESC's to be easily plugged into this wiring harness. Once the positive & negative wires of the ESC's are connected to this harness, you simply connect the motors to the ESC's, and you are finished.

This wire harness features bare leads on the battery terminal end (main positive & negative terminals), allowing use of a connector of your choice.

Includes:

• (1) Red-Positive Side Wire Harness with 3.5mm female connector soldered
• (1) Black- Negative Side Wire Harness with 3.5mm female connector soldered

Application:

• Sky Hero all models.

Sky hero Motor wedges set, Made from Aluminium T6, allow motors to be angles 10-20 Degrees.

Set of 4.

Sky Hero Spy / SPYDER6 Wiring Harness

Sky Hero makes it easy when utilizing multiple motor applications with your Sky Hero kit, allowing up to (7) ESC's to be attached to this wire harness. No power distribution board is needed when utilizing this wire set, allowing multiple ESC's to be connected in quick fashion, without fuss.

Designed to be used with Sky Hero's line of ESC's, the Sky Hero ESC's feature pre soldered bullet connectors on the power terminal allowing the ESC's to be easily plugged into this wiring harness. Once the positive & negative wires of the ESC's are connected to this harness, you simply connect the motors to the ESC's, and you are finished.

This wire harness features bare leads on the battery terminal end (main positive & negative terminals), allowing use of a connector of your choice.

Includes:

(1) Positive Side Wire Harness
(1) Negative Side Wire Harness

Application:

Sky Hero Spy or SPYDER6

Usage:

(1) Set Necessary for Spy Series / (2) Sets Necessary for SPYDER6

S KH05-0022 Canopy Spyder white color

Hero Canopy Spyder white color, B-suface

those canopies are perfect for Painting, they have small cosmetic flaw only.

Benefit from the best price.

SKH03-021-01 Inertic mount Spy

Sky-Hero Main frame Spy

Sky-Hero EASY ACCESS LIGHTENED MAIN FRAME SPYDER,

made from carbon

Sky-Hero EASY ACCESS LIGHTENED MAIN FRAME SPYDER,

made from GFK

Colors Blue or Green

Sky-Hero ESC 20A 6S SimonK Opto Little Spyder