Sab Goblin

Making a comparison with Urukay Genesis, the famous model developed to win in the F3C category, here are the main differences:

• Longer boom that will enable the use of 800mm blades.
• 3-Bladed tail rotor in order to give the correct authority.
• Rigid transmission module with longer main shaft.
• Aggressive graphic scheme.

These are the characteristics of the Urukay Maverick, an important model, prestigious, and perfect for an exciting, powerful and realistic flight… The sound of the 800mm blades is amazing!

( the KIT includes the simulation of the side missiles )

Technical Specifications :

• AIRFRAME weight: 4250gr (with blades, no battery, no electronics)
• Main blade length: 2x 800mm
• Tail blade length: 3x 115mm
• Main rotor diameter: 1768 mm (with 800 mm blades included)
• Tail rotor diameter: 305 mm (with 115 mm tail blades included)
• Cyclic Servos: standard size 40mm
• Tail Servo: standard size 40mm
• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)
• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
• Typical motor: 4530 series
• Typical speed controller: 12S, 160-200 A
• Battery size: 12S 4500/5500 mAh

This is the Super combo of Sab Maverick SG800 helicopter. the package will include the following:

Kit Maverick SG800
Motor Scorpion 4530-500KV or 4525-520kv
ESC Scorpion Tribunus 200 or HW 200Amp esc
Cyclic Servos : Savox 1257TG/1258TG  x 3 or KST DS725 x 3
Tail Servo : Savox 1290MG or KST BLS 905 x 1

* Choice is offered based on Stock situation.

Goblin RAW 700 "Skeleton" Pod-and-Boom model , Kit version, Neon Yellow

RAW TECHNICAL SPECIFICATIONS

1. AIR FRAME weight: 2620gr (with blades, no battery, no electronics)
2. Main blade length: 650mm to 720mm
3. Tail blade length: 105 to 115 mm
4. Main rotor diameter: 1548 mm (with 690 mm blades included)
5. Tail rotor diameter: 284 mm (with 105 mm tail blades included)
6. Cyclic Servos: standard size 40mm
7. Tail Servo: standard size 40mm.
8. Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)
9. Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
10. Typical motor: 4525 series
11. Typical speed controller: 12S, 160-200 A
12. Battery size: 12S 4500-5500 mAh.

1. Included in the kit
   
      2 x battery rails
2. 1 x 21T belt pulley
3. 1 x 690mm SAB rotor blades
4. 1 x 105mm SAB tail rotor blades
5. manual

Goblin RAW 700 "Skeleton" Pod-and-Boom model ,White-Orange Kit #SG738

RAW TECHNICAL SPECIFICATIONS

1. AIR FRAME weight: 2620gr (with blades, no battery, no electronics)
2. Main blade length: 650mm to 720mm
3. Tail blade length: 105 to 115 mm
4. Main rotor diameter: 1548 mm (with 690 mm blades included)
5. Tail rotor diameter: 284 mm (with 105 mm tail blades included)
6. Cyclic Servos: standard size 40mm
7. Tail Servo: standard size 40mm.
8. Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)
9. Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
10. Typical motor: 4525 series
11. Typical speed controller: 12S, 160-200 A
12. Battery size: 12S 4500-5500 mAh.

The power available in a nitro model is half the power of the electric model.

The search for lightness is fundamental... for this reason, the RAW 700 NITRO uses a mix of solutions between size 700 and size 600, looking for the maximum optimization of all the parts.

The result is a model of about 4Kg (No fuel) ready to fly.

With this weight, the engine never loses rpm, the feeling is like having an electric model in your hands.

Goblin RAW NITRO, The lightest 700 sized nitro from SAB

RTF Approx. Weight: 4040 g (RTF no fuel)
Main blade length: 650mm to 720mm ( 690mm included )
Tail blade length: 105 to 115 mm ( 105mm included )
Main rotor diameter: 1558 mm (with 690 mm blades)
Tail rotor diameter: 284 mm (with 105 mm tail blades)
Engine: .90 to .105 Nitro Heli Engine
Cyclic Servos: Standard size 40mm
Tail Servo: Standard size 40mm
Throttle Servo: Mini size 35 mm or Standard size 40mm
Main Rotor ratio: 7.7- 8.3 :1 (27T included: 8:1)
Tail Rotor ratio: 5.1 - 4.9:1 ( 22T included: 5.1:1 )
Tank Capacity: 650ml
RX Battery Size: 2S-1800 / 2500 mAh

This is full upgraded RAW, with a super aggressive graphic, light landing gear and carbon tail boom…

Just for pilots who want the best!

Technical Specifications :

• AIRFRAME weight: 2920gr (with blades, no battery, no electronics)
• Main blade length: 690mm
• Tail blade length: 105mm
• Main rotor diameter: 1582 mm (with 690 mm blades included)
• Tail rotor diameter: 285 mm (with 105 mm tail blades included)
• Cyclic Servos: standard size 40mm
• Tail Servo: standard size 40mm
• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)
• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
• Typical motor: 4525 series
• Typical speed controller: 12S, 160-200 A
• Battery size: 12S 4500-5500 mAh

This is a super combo of SG743 Kyle stacy, including the following items

• Kit SG743 kyle stacy- 3 bladed helicopter (with blades, no battery, no electronics)
• Cyclic Servos:Savox 1257TG/1258TG or KSTds725 x 3
• Tail Servo: Savox 1290mg or KST BLS915
• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)
• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
• Typical motor: 4530-540 Scorpion
• Typical speed controller: Tribunus+ 14s200a or HW260a

Goblin RAW 700 KSE super combo

This combo including:

• Raw KSE SG743 Kit, with blades
• Motor scorpion HKII 4525-520kv Ultimate
• ESC Tribunus II+ 14s-200Amps
• 3 Cyclic servos Savox 1257/8TG or KST(DS745/BLS905 IF stock allows)
• Tail servo Savox 1290mg or KST( IF stock allows)

Goblin RAW 700 PIUMA, super combo version , Servos, Motor, ESC

This combo including:

• Raw PIUMA SG749 Kit, with blades
• Motor scorpion HK5-4026-1115kv
  
• ESC 120 Amps HW/scorpion
• 3 Cyclic servos Savox 1257/8TG or KST(DS745/BLS905 IF stock allows)
• Tail servo Savox 1290mg or KST( IF stock allows)

There are many details that bring the Urukay Genesis to the top as gearbox, special main shaft, new rotor head geometry…

The new fuselage is extremely modern and effective in terms of flight line presentation, it completes the features that make the Urukay Genesis a model ready for any challenge.

Specifications :

AIRFRAME weight: 2950gr (with blades, no battery, no electronics)

Main blade length: 690mm to 760mm

Tail blade length: 105 to 115 mm

Main rotor diameter: 1662 mm (with new F3c 747 mm blades included)

Tail rotor diameter: 284 mm (with 105 mm tail blades included)

Cyclic Servos: standard size 40mm

Tail Servo: standard size 40mm

Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)

Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)

Typical motor: 4525 series

Typical speed controller: 12S, 160-200 A

Battery size: 12S 4500-5500 mAh

ROTOR HEAD

Ultra-light, 7075 aluminum alloy highly adjustable rotor head. The head allows for a very broad range of dampening setups. The dampers are composed of 3 O-rings (these define the rigidity) and a techno polymer damper (that defines the maximum possible movement of the spindle). Using different O-ring and dampers you can setup a different feeling of the model. The 35 mm use blade grips are optimized for F3C.

POWER TRAIN

Power train is fully enclosed in an aluminum case. Helical gears, Delrin swashplate guide, separate top bearing. We looked for the most innovative and avant-garde solutions.

CONICAL MAIN SHAFT-HUB

Conical coupling between main shaft and hub. This type of connection ensures excellent coaxially.

TAIL ROTOR

An ultra-light tail case with quick and easy tail fin replacement. Very simple, strong, reliable & durable. Large diameter tail drive pulleys allow for maximum efficiency in power transfer.

The Genesis sport is the latest and greatest sport flying / F3C machine from SAB. By sharing a considerable amount of parts with its sister ship, the ilGoblin Pro, the new Genesis sport is an unbeatable deal for those who prefer a larger, more stable machine with very large blades and excellent sport, precision or mild 3D flying characteristics.

The Genesis sport is based on the ilGoblin mechanical design resenting significant technological advancements in RC helicopters.

Preorder- delivery around begin november 2024

Main transmission:

• The main transmission is based on the Goblin gearbox, now further improved
• The main shaft diameter is now 15 mm for increased rigidity
• New helical gears for increased durability and strength
• New One-Way system, redesigned for optimal performance
• A fast disassembly servo mount that allows for easier and faster maintenance
• The new gearbox is lighter than previous models

Rotor head:

• New design that features new blade grip arms with an improved locking system
• Self-Centering Titanium washers that ensure automatic centering for greater precision
• Pivot shaft for the spindle allowing customization of rigidity and maximum movement

Tail rotor:

• 8 mm Tail shaft with 8x16x5 bearings that contribute to increase rigidity and a smoother tail
• The shaft and the hub are made from a single part in order to have maximum precision
• Upgraded tail slider for improved tail precision.
• The tail pulley will be available in 3 different sizes to adjust the tail ratio according to personal preference

Canopy and blades:

• Batteries can be installed from the rear with quick connectors eliminating the need to remove the canopy.
• The blades in the kit are the new S747, with new profile and dynamic performance, color-matched to the canopy
• The tail blades are S110 with a new design for improved performance.

It is a special and cheaper version of the Maverick with 800 mm main blades, In orange glass fiber fuselage

The Maverick Sport uses all the important characteristic of the normal Maverick, such as 800mm main blades, 3-blades tail rotor for great tail authority, with new awesome Orange ghaphic scheme.... Listening to the sound of this Heli in the air... is a unique sensation

TECHNICAL SPECIFICATIONS:

• AIRFRAME weight: 4250gr (with blades, no battery, no electronics)

• Main blade length: 2x 800mm

• Tail blade length: 3x 115

• Main rotor diameter: 1768 mm (with 800 mm blades included)

• Tail rotor diameter: 305 mm (with 115 mm tail blades included)

• Cyclic Servos: standard size 40mm

• Tail Servo: standard size 40mm.

• Main Rotor ratio: 11.8 to 8.4 (21T included: 10.1:1)

• Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)

• Typical motor: 4530 series

• Typical speed controller: 12S, 160-200 A

• Battery size: 12S 5500 mAh.

SAB Goblin ilGoblin Pro 700 , super combo version: Servos, Motor, ESC

This combo including:

• SAB Goblin ilGoblin Pro 700 Kit, with blades
• Motor scorpion HK5-5024-535kv
  
• ESC Tribunus 220a or Hobbywing 260a
  
• 3 Cyclic servos Savox 1257/8TG or KST(DS745/BLS905 IF stock allows)
• Tail servo Savox 1290mg or KST( IF stock allows)

The iL Goblin Pro KSE elevates 3-blade flying to a whole new level. With a more robust transmission case, redesigned tail rotor, upgraded head design, and the cutting-edge S682mm blades, it sets the standard as the strongest and most precise 3-blade helicopter available. Its striking orange carbon fiber scheme adds a distinctive touch, making it truly one of a kind.

Specifications:

• AIRFRAME weight: 2272 gr (no blades, no battery, no electronics)
• Main blades length: 682 mm (3 Blades)
• Tail blades length: 110 mm (3 Blades)
• Cyclic Servos: Standard size 40 mm
• Tail Servo: Standard size 40 mm
• Main Rotor Ratio: 11.8 to 8.8 (21T included: 10.1:1)
• Tail Rotor Ratio: 5.1-4.9:1 (26T included: 4.9:1)
• Main shaft: 15 mm, Tail shaft: 8 mm
• Molded carbon tail boom
• Typical motor: 12S, 480/560 KV
• Battery room: 50x60x300 mm

Sab goblin Kraken 580 Combo, High Voltage Golden Package including the following

High Voltage , setup for 12s

• Kraken Kit SG580
• 3 Servos Savox 1257TG or 1258TG Titanium Gear
• 1 SERVO tail Savox 1290mg
• Motor Scorpion 4026-520kv 12S
• Scorpion Tribunus II 12-80 Amp ESC
• Conversion kit 1207/1217 to fit full size servos to the kit
• Carry Bag Avizar 600 size

If you want to add/change the package, you welcome to send us the mail, we are flexible to do many different combos

Sab goblin Kraken 580 Combo, Low Voltage Golden Package including the following

Low voltage, 6S

• Kraken Kit SG580
• 3 Servos Savox 1257TG or 1258TG Titanium Gear
• 1 Tail Servo Savox 1290mg
• Motor Scorpion HK5-4026-1115 6S
• Scorpion Tribunus II 6s 110Amp ESC or HW (hobbywing) 6s 120/150 amp
• Conversion kit H1207 & H1217 to fit full size servos to the kit
• Carry Bag Avizar 600 size

The best combo you can have.! The highly anticipated Kraken 580 Nitro! The most powerful and agile 50 sized nitro model to date! The Kraken 580 Nitro features an enclosed gear box, tunable rotor head, integrated side frames as well as it can accept up to 600mm rotor blades!

Included in the combo

• SG581 Kraken Nitro kit with blades
• 3 Servos Savox 1258/1257 Titanium gears, or KST, BLS905 OR 915 (AS STOCK allows)
• 1 Servo Savox 1290mg or KST DS565 tail
• OS 55HZ-R HYPER
• Muffler OS, ALIGN( as stock permits)
• Helicopter Carry Bag- Gift
• Adapter SERVO set H1207 & H1217

The highly anticipated Kraken 580 Nitro! The most powerful and agile 50 sized nitro model to date! The Kraken 580 Nitro features an enclosed gear box, tunable rotor head, integrated side frames as well as it can accept up to 600mm rotor blades!

Main and tail blades included (570mm main blades and 95mm tail blades).

RTF Approx. Weight: 3090 g (no fuel)

Main blade length: 550mm to 600mm (570 mm included)

Tail blade length: 95 to 105 mm (95mm included)

Cyclic Servos: Mini size 35 mm (Standard size 40mm option)

Tail Servo: Standard size 40mm.

Main Rotor Ratio: 7.98 to 7.4 :1 (28T included: 7.4:1)

Tail Rotor Ratio: 5.3-4.9:1 (23T included: 4.9:1)

Engine: .50 to .60 Nitro Heli Engine

Tank Capability: 440ml.

RX battery size: 2S-1800 mAh

The new Kraken 580 use the same concepts from the Kraken 700.

-Incredible strong Power train enclosed in aluminum case,

-Ultra light 7075 aluminum alloy highly adjustable rotor head with super simple Tail group,

-Body and boom design with integrated frames, to create a amazing fuselage style

-Boom detachment system for improved crash durability.

-Main blades up to 600mm.

TECHNICAL SPECITICATIONS

-AIRFRAME weight: 1760gr ( with blades, no battery, no electronics )

-Main blade length: 550mm to 600mm

-Tail blade length: 95 to 105 mm

-Main rotor diameter: 1290 mm (with 580 mm blades included)

-Tail rotor diameter: 260 mm (with 95 mm tail blades included)

-Cyclic Servos: mini cyclic servo (torque over 8 Kg-cm). Kit includes servo mounts for mini-servos. Full size servo mounts available separately.

-Tail Servo: standard size 40mm.

-Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1)

-Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 )

-Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv. Minimum motor shaft length is 26mm (We recommend using a 6mm diameter motor shaft)

-Typical speed controller: 6S 120-140 A, 12S 100-130A

-Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh.

Goblin Kraken 580 Orange/Blue

This is the Kraken 580 with 2024 Orange/Blue scheme!

The new Kraken 580 use the same concepts from the Kraken 700.

-Incredible strong Power train enclosed in aluminum case,

-Ultra light 7075 aluminum alloy highly adjustable rotor head with super simple Tail group,

-Body and boom design with integrated frames, to create a amazing fuselage style

-Boom detachment system for improved crash durability.

-Main blades up to 600mm.

TECHNICAL SPECITICATIONS

-AIRFRAME weight: 1760gr ( with blades, no battery, no electronics )

-Main blade length: 550mm to 600mm

-Tail blade length: 95 to 105 mm

-Main rotor diameter: 1270 mm (with 570 mm blades included)

-Tail rotor diameter: 260 mm (with 95 mm tail blades included)

-Cyclic Servos: mini cyclic servo (torque over 8 Kg-cm). Kit includes servo mounts for mini-servos. Full size servo mounts available separately.

-Tail Servo: standard size 40mm.

-Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1)

-Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 )

-Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv. Minimum motor shaft length is 26mm (We recommend using a 6mm diameter motor shaft)

-Typical speed controller: 6S 120-140 A, 12S 100-130A

-Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh.

Release date is around End June, preorders opened

• Feature of being able to use blades up to 600 mm in length.
• Kraken 580 works perfectly with cyclic mini-servos (torque over 8 Kg-cm). Kit includes supports for mini-servo.Possible to use standard servos of
• size of 40 mm, with Optional parts H1217-S & H1207-S
• Fit motor pulleys H0015-xx-S series
• Suggested motor is scorpion 4025-xx SERIES, with 6mm shaft 26mm min length

TECHNICAL SPECITICATIONS

• AIRFRAME weight: 1760gr ( with blades, no battery, no electronics )
• Main blade length: 550mm to 600mm
• Tail blade length: 95 to 105 mm
• Main rotor diameter: 1270 mm (with 570 mm blades included)
• Tail rotor diameter: 260 mm (with 95 mm tail blades included)
• Cyclic Servos: mini size 35 mm (standard size 40mm with optional parts )
• Tail Servo: standard size 40mm.
• Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1)
• Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 )
• Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv
• Typical speed controller: 6S 120-140 A, 12S 100-130A
• Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh

New Kraken 700 S is a version with completely renewed graphic scheme and with RAW transmission gearbox. New Blades S 700mm size.
This is a pre-order- delivery will be end of November

• Main blade length - 700mm
• Tail blade length - 105mm
• Weight 2700g (with blades, no battery, no electronic)
• Cyclic Servos Standard size 40mm
• Tail Servo Standard size 40mm
• Typical speed controller 200A
• Maximum motor size 62 mm diameter x 70 mm height
• Motor KV 500-560KV
• Battery compartment 56mmx60mmx320mm
• Battery capacity 12S 4200/5500 mAh
• Available ratios from 8.4 to 11.8

PIUMA (feather in Italian) is synonymous with lightness. This 700-sized model is extraordinarily light and comes up with a new style of flying. It does not replace the classic RAW 700 but it creates another option for those who do not like crazy head speed but want a light flying style that does not exceed “physical limits” with an interesting low-cost setup.

All our tests were done with the typical 580 setup (4025/4030 motor size).

The weight of the PIUMA with 6S-5500 mA/h battery is under 4 Kg.

RAW PIUMA is obtained from the MIX of the parts used in the RAW 700 - RAW 580 - RAW 700 NITRO.

12S 3300-3700 mA/h or 6S 5200-5800 mA/h are the recommended setups for the best flight compromise.

12S 5000 mA/h for 6 minutes of good average 3D.

Specification :

• AIRFRAME weight: 2200gr (with blades, no battery, no electronics).

• Main rotor diameter: 1542 mm (with 700 mm blades).

• Main blade length: 650 to 730mm.

• Tail rotor diameter: 276 mm (with 105 mm tail blades).

• Tail blade length: 105 to 115 mm.

• Cyclic Servos: Standard size 40mm.

• Tail Servo: Standard size 40mm.

• Main Rotor Ratio: 12 to 9 (20T included: 10.77:1).

• Tail Rotor Ratio: 4.9-5.1:1 (22T included: 5.1:1).

KIT Includes:

• 20T motor pulley (other pulley sizes available).

• 2 battery trays with straps.

• S 700 mm main blades.

• S 105 mm tail blades.

This is a limited edition run in a new colour scheme with a carbon canopy, colored boom

This little heli is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (micro cyclic & mini tail), an ESC and a flight controller!
We recommend either the HobbyWing 60 or 80 amp controllers or the Scorpion 06_80. All of these are excellent choices, if you are planing on doing mild 3D or sport flying, the Hobby-wing 60 is the best choice, for harder 3D, then the 80 amp ESCs are preferred.

The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go.

Main Highlights of new Raw 420 from Sab goblin

• Direct Drive Motor (Competition motor included)
• New S Line blades (420mm and 70mm included)
• Quick release battery tray with built-in connectors
• 10mm one way bearing integrated into the motor
• Zytel HTN resin blade grip arms (sacrificial)
• The canopy does not need to be removed to replace batteries
• Neon yellow color for best visibility (available initially in yellow only)
• Carbon fiber molded boom as an option also available

Raw 420 Specifications:

• Airframe weight: 1000 grams (with motor and blades)
• Main rotor diameter 935mm (with 420mm blades)
• Main blade length 380 to 420mm
• Tail rotor diameter 190mm (with 70mm tail blades)
• Tail blade length 60 to 70mm
• Micro size cyclic servos (23mm)
• Mini size tail servo (35mm)
• Maximum battery size 40x54x135mm
• Recommended battery 6s 2200/2700 mAh
• Recommended battery weight 350-420 grams
• Recommended ESC 60 ( 70-80A is required only for hard 3D flight with temperatures above 30°C)
• Tail rotor ratio 4:1
• 8mm main shaft
• 5mm tail shaft

This is how the RAW 420 Competition was born. Lighter, faster, more flexible in the selection of the desired head speed at a higher performance level.

Specification:

• Main rotor diameter 935mm (with 420mm blades)

• Main blade length 380 to 420mm

• Tail rotor diameter 190mm (with 70mm tail blades)

• Tail blade length 60 to 70mm

• Micro size cyclic servos (23mm)

• Mini size tail servo (35mm)

• Maximum battery size: 140x40x50mm (max)

• Recommended battery: 6s 2200/2700 mAh

• Recommended motor: 3020 – 3215 – 3220

• Recommended KV motor: 900-1000 KV

• Recommended battery weight: 350-420 grams

• Recommended ESC: 60 (70-80A is required only for hard 3D flight with temperatures above 30°C)

• Tail rotor ratio 4:1

• 8mm main shaft

• 5mm tail shaft

Raw 420 Competition main features:

• Quick release battery tray with integrated connectors

• Zytel HTN resin blade grip arms (sacrificial)

• It is not necessary to remove the canopy to replace the batteries.

• Main ratio 1:5/6

• Tail ratio 4:1

One of the most revolutionary helicopters of today. The Raw 420 has an incredibly large, direct drive motor offering superb performance for 3D pilots and incredible efficiency for sport flyers and beginners alike!

This little heli is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (micro cyclic & mini tail), an ESC and a flight controller!
We recommend either the HobbyWing 60 or 80 amp controllers or the Scorpion 06_80. All of these are excellent choices, if you are planing on doing mild 3D or sport flying, the Hobby-wing 60 is the best choice, for harder 3D, then the 80 amp ESCs are preferred.

The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go.

Main Highlights of new Raw 420 from Sab goblin

• Direct Drive Motor (Competition motor included)
• New S Line blades (420mm and 70mm included)
• Quick release battery tray with built-in connectors
• 10mm one way bearing integrated into the motor
• Zytel HTN resin blade grip arms (sacrificial)
• The canopy does not need to be removed to replace batteries
• Neon yellow color for best visibility (available initially in yellow only)
• Carbon fiber molded boom as an option also available

Raw 420 Specifications:

• Airframe weight: 1000 grams (with motor and blades)
• Main rotor diameter 935mm (with 420mm blades)
• Main blade length 380 to 420mm
• Tail rotor diameter 190mm (with 70mm tail blades)
• Tail blade length 60 to 70mm
• Micro size cyclic servos (23mm)
• Mini size tail servo (35mm)
• Maximum battery size 40x54x135mm
• Recommended battery 6s 2200/2700 mAh
• Recommended battery weight 350-420 grams
• Recommended ESC 60 ( 70-80A is required only for hard 3D flight with temperatures above 30°C)
• Tail rotor ratio 4:1
• 8mm main shaft
• 5mm tail shaft

This is the super combo of SG421 RAW420

this set delivered with Servos, ESC

Sab RAW 420 kit with direct drive motor, blades.

3 x CYCLIC Servos: KST MS325 or X12-508

1x Tail : KST DS565  or X15-755 OR X15-855

1 x ESC scorpion Tribunus  or HW 80amp

Optional : Lipo SLS 6S 2200/2600, MADE for goblin*

Some accessories such connectors, etc might  be need to be purchased separately.

* Optional add on

This is a limited edition run in a new colour scheme with a carbon canopy, colored boom

This little heli is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (micro cyclic & mini tail), an ESC and a flight controller!
We recommend either the HobbyWing 60 or 80 amp controllers or the Scorpion 06_80. All of these are excellent choices, if you are planing on doing mild 3D or sport flying, the Hobby-wing 60 is the best choice, for harder 3D, then the 80 amp ESCs are preferred.

The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go.

Main Highlights of new Raw 420 from Sab goblin

• Direct Drive Motor (Competition motor included)
• New S Line blades (420mm and 70mm included)
• Quick release battery tray with built-in connectors
• 10mm one way bearing integrated into the motor
• Zytel HTN resin blade grip arms (sacrificial)
• The canopy does not need to be removed to replace batteries
• Neon yellow color for best visibility (available initially in yellow only)
• Carbon fiber molded boom as an option also available

Raw 420 Specifications:

• Airframe weight: 1000 grams (with motor and blades)
• Main rotor diameter 935mm (with 420mm blades)
• Main blade length 380 to 420mm
• Tail rotor diameter 190mm (with 70mm tail blades)
• Tail blade length 60 to 70mm
• Micro size cyclic servos (23mm)
• Mini size tail servo (35mm)
• Maximum battery size 40x54x135mm
• Recommended battery 6s 2200/2700 mAh
• Recommended battery weight 350-420 grams
• Recommended ESC 60 ( 70-80A is required only for hard 3D flight with temperatures above 30°C)
• Tail rotor ratio 4:1
• 8mm main shaft
• 5mm tail shaft

- RTF weight without battery 1824g
- Main rotor diameter 1180mm (with 500mm blades)
- Length of the tail blades 80mm
- Mini size cyclic servos (35mm)
- Mini tail servo (35mm)
- Maximum dimensions of the battery 48x48x150mm
- Recommended battery 6S 3300/3700 mAh
- Recommended battery weight 550-600g
- Recommended ESC 6S-120A
- Motor size 4020 (800-900Kv)

Main Features

- Quick release battery tray with integrated connectors
- Zytel HTN resin blade grip arms (sacrificial)
- It is not necessary to remove the canopy to replace the batteries
- Main ratio 1:5/6
- Tail ratio 4:1
- Main rotor diameter 1180mm (with 500mm Main Blades)
- Main blade length 501mm
- Tail rotor diameter 218mm (with 80mm Tail Blades)
- Tail blade length 80mm
- Main shaft diameter 8mm
- Tail shaft diameter 5mm
- weight 1824g w/o battery

- Cyclic Servos Mini Size 35mm
- Tail Servo Mini Size 35mm
- Typical speed controller 6S 120A
- Maximum motor size 52 mm diameter x 55 mm height
- Motor KV 4020 (800-900Kv)
- Battery compartment 48x48x150mm

This is the super combo of sg520 RAW500

See below the options of your choice. if you wish to have other options, contact us

included in the combo!

Sab RAW 500 SG520 kit with direct drive motor, blades.
Motor Scorpion HK5-4020 850kv RAW 500 special
3 x CYCLIC Servos: KST X15-1208
1x Tail servo KST X15-755
1 x ESC Hobbywing 150Amps 6s

Some accessories such connectors, etc might  be need to be purchased separately.

This kit is like SG520 kit but with Canopy White H1930-S and Boom White H1935-S

Specifications

- RTF weight without battery 1824g
- Main rotor diameter 1180mm (with 500mm blades)
- Length of the tail blades 80mm
- Mini size cyclic servos (35mm)
- Mini tail servo (35mm)
- Maximum dimensions of the battery 48x48x150mm
- Recommended battery 6S 3300/3700 mAh
- Recommended battery weight 550-600g
- Recommended ESC 6S-120A
- Motor size 4020 (800-900Kv)

Main Features

- Quick release battery tray with integrated connectors
- Zytel HTN resin blade grip arms (sacrificial)
- It is not necessary to remove the canopy to replace the batteries
- Main ratio 1:5/6
- Tail ratio 4:1
- Main rotor diameter  1180mm (with 500mm Main Blades)
- Main blade length  501mm
- Tail rotor diameter  218mm (with 80mm Tail Blades)
- Tail blade length  80mm
- Main shaft diameter  8mm
- Tail shaft diameter  5mm
- weight  1824g w/o battery

- Cyclic Servos  Mini Size 35mm
- Tail Servo  Mini Size 35mm
- Typical speed controller  6S 120A
- Maximum motor size  52 mm diameter x 55 mm height
- Motor KV  4020 (800-900Kv)
- Battery compartment  48x48x150mm

We offer also Combos High voltage or Low voltage Setup

The Goblin Raw 580 from SAB delivers high performance, and unique aesthetics that are derived from it's big brother; the Raw 700.

For pilots looking for a platform that handles both 6s and 12s applications, while being a compact size,

the 580 is not only a great size, but can perform like the top tier 700 class helicopters.

The Raw 580 color scheme features a distinctive style; offering two styles on the left and right side of the model.

The canopy features a green lower section on the left, while the right side features a red color.

Paired with a yellow windshield, and orange top, visibility will not be a problem in any environment.

The kit will include five different stickers for the lower carbon frames, and tail fin, so the color scheme is yours to make with a wide variety of options.

The Raw 580 is equipped with a set of 580mm S lineup for SAB Main blades, and matching carbon tail blades.

SAB Goblin RAW 580 Electric Helicopter 6S or 12S helicopter Kit

• Main blade length 580mm ( S580 )

• Tail blade length 95mm ( S95 )

• Air Frame Weight 1740g (with blades, no battery, no electronic)

• Cyclic Servos Mini ( Upgrade Standard size 40mm)

• Tail Servo Standard size 40mm

• Typical setup same as Kraken 580, 6S or 12S, 4025 motor size ( recommended Scorpion HKXX 4025 -1100 FOR 6s, 500-550kv for 12S )

This is the Super combo of Raw 580, choice of Savox or KST servos. If you want another components, contact us in advance

Included in the Combo:

Raw 580 KIT

Motor Scorpion HK5-4026-1115KV, goblin shaft

ESC Tribunus Scorpion 6-110/ OR hobbywing 120A (stock dependand)

OPTION 1: 3x Savox 1257/1258 Titan gear (Cyclic), 1x Savox 1290MG (TAIL)
OPTION 2: 3x KST DS725 (Cyclic) , 1x KST BLS805 (TAIL)

Adapter for standard size servo H1207&1217

This is a combo of SG584, including the following:

• SG584 kit
  
• 4 servos Savox or KST( 3 X X15 cyclic, 1x DS565 tail)
  
• OS55 HZ hyper engine
• OS Powerboost Muffler 55

Brand new from SAB, the SAB Raw 580 Nitro is the perfect machine for nitro enthusiasts offering the same incredible performance of the Raw 700 Nitro in a smaller package.

The Raw 580 comes with the new S Line 580mm main blades and 95mm tail blades.

Specs:

• Main blade length: 550mm to 600mm (S580 included)
• Tail blade length: 95mm to 105mm ( S95 included )
• Nitro Engine: .50 to .60 heli nitro engine
• Main Rotor Diameter: 1296mm with 580mm blades
• Tail Rotor Diameter: 260mm with 95mm blades
• Weight: 3080g (ready to fly minus fuel)
• Cyclic Servos: Mini (Upgrade Standard size option available)
• Tail Servo: Standard size 40mm
• Throttle Servo: Mini
• Main Rotor Ratio: 8.6:1 - 7.4:1 (26T included 8:1)
  
• Tail Rotor Ratio: 5.3:1 - 4.9:1 (23T included 4.9:1)
• Tank Capacity: 440ml
• Rx Battery Size: 2s-1800 mAh

Here is the latest one from Sab-Goblin, the Famous Raw model now in Nitro version. easy to maintain, easy to access and much more.

this is the Kit version and delivered with Main and tail blades.

Pre-orders are open, delivery is around July, no exact day for now

RAW NITRO TECHNICAL SPECIFICATIONS

• RTF Approx. Weight: 4000 g (RTF no fuel).

• Main blade length: 650mm to 730mm ( 690mm included ).

• Tail blade length: 105 to 115 mm ( 105mm included ).

• Main rotor diameter: 1558 mm (with 690 mm blades).

• Tail rotor diameter: 284 mm (with 105 mm tail blades).

• Engine: .90 to .105 Nitro Heli Engine.

• Cyclic Servos: Standard size 40mm.

• Tail Servo: Standard size 40mm.

• Throttle Servo: Mini size 35 mm or Standard size 40mm.

• Main Rotor Ratio: 7.7- 8.3 :1 (27T included: 8:1).

• Tail Rotor Ratio : 5.1 - 4.9:1 ( 22T included: 5.1:1 ).

• Tank Capacity: 650ml.

• RX Battery Size: 2S-1800 / 2500 mAh.