RX-TX packs

Authentic battery with BMS to suit the T18SZ, T4PKS, T4PL, T14SG, T8J & T6J.

Specifications

• Weight:     105g
• Capacity:     2100mAh
• Dimensions:     78 x 41 x 16mm
• Voltage:     6.6V
• Type:     Li-Fe

Gens ace 1400mAh 7.4V 2S1P Transmitter Pack. Not like the other rc batteries, this battery has low discharge rate, only 1C, equipped with JST-XHR balance plug and JR discharge plug, it is suitable to Husban H501S H502S H107D H107D+ Transmitter

Gens ace 1400mAh 7.4V 2S1P Transmitter Pack Specs:

- Capacity: 1400mAh
- Voltage: 7.4V/2S
- Discharge Rate: 1C
- Net Weight (±10g): 57g
- Size (±5): 76X30X13mm
- Charge Rate: 0.2C Recommended, 1C Max

This is a Gens ace 2600mAh 7.4V 2S1P Transmitter Pack. Not like the other RC batteries, this battery has low discharge rate, only 1C, equipped with JST-XHR balance plug and Futaba+JST-EHR discharge plug, it is suitable to Sanwa MT4/M11X/M12, Futaba T6J / T8FG 12FG,TARANIS X9D 2019 PLUS .

Specifications :

• Product Type:lipo battery pack
• Capacity: 2600mAh
• Voltage: 7.4V
• Weight: 97g
• Dimensions: 92*29*16mm
• Balance Plug: JST-XH
• Discharge Plug:Futaba
• Charge Rate: 1-3C Recommended, 5C Max

Gens ace 3500mAh 7.4V RX 2S1P Lipo Battery Pack / RX/ TX

Gens ace 3500mAh 7.4V RX/ TX 2S1P Lipo for Remote control. It is designed for Futaba transmitter. It delivers the full capacity, stable performance and long cycle life.

Specifications

• Product Type:lipo battery pack
• Capacity: 3500mAh
• Voltage: 7.4V
• Weight: : 140g
• Dimensions:96*44*14 mm
• Balance Plug: JSTXH
• Discharge Plug: Futaba and spektrum tx plugs
• Charge Rate: 1C Recommended

Gens ace 3800mAh 7.4V 2S1P TX Lipo Battery Pack with JST-SYP Plug has remarkable stacking technology which enables single cell capacity of 3800mAh. It delivers full capacity, stable performance, and long cycle life. Gens ace 3800mAh 7.4V 2S1P Lipo Battery Pack is suitable for QX7 and other RC models. The battery is suited to Spektrum DX9, DX8, DX7S, DX7 and futaba.  
Specification:

• Capacity: 3800mAh
• Voltage: 7.4V
• Net weight: : 140g
• Dimensions: 70*52*19mm
• Balance Plug: JST-XHR
• Discharge Plug: JST-SYP
• Charge Rate: 0.2C Recommended,0.5C Max

Gens ace 4000mAh 7.4V Transmitter 2S1P Lipo Battery Pack with best price and local service, it's have high quality and high discharge,  The battery is suited to Transmitters and receivers

For tx it fits perfectly: Spektrum DX9, DX8, DX7S, DX7 and futaba
 
Gens ace 4000mAh 7.4V Transmitter 2S1P Lipo Battery Specs：

•     Capacity: 4000mAh
•     Voltage: 7.4V (2S)
•     Discharge Rate: 1C
•     Weight: 148g
•     Size: 72x52x20mm
•     Charge Rate: 0.2C Recommended, 0.5C Max

Gens ace 5000mAh 7.4V 65C 2S1P HardCase Lipo

• Capacity: 5000mAh
• Voltage: 7.4V
• Max Continuous Discharge: 65C (325A)
• Max Burst Discharge: 130C (650A)
• Weight: 294 g
• Dimensions: 139*47*25mm
• Balance Plug: JST-XH
• Discharge Plug: 5.0 mm banana plug to T+XHR
• Charge Rate: 1-3C Recommended, 5C Max

Gens ace 5000mAh 7.4V 65C 2S2P HardCase Lipo

• Capacity: 5000mAh
• Voltage: 7.4V
• Max Continuous Discharge: 65C (325A)
• Max Burst Discharge: 130C (650A)
• Weight: 308 g
• Dimensions: 139*47*24.9mm
• Balance Plug: JST-XH
• Discharge Plug:4.0mm Banana to Tplug
• Charge Rate: 1-3C Recommended, 5C Max

Gens ace 5000mAh 7.4V RX/TX 2S1P Lipo Battery Pack. Battery pack for Remote control.

Specification:

• Net Weight (g)     200
• Brand     Gens ace
• Capacity     5000 mAh
• Discharge Rate (C)     1
• Max Cont Current (A)     0
• Max Burst Current (A)     0
• Max Burst discharge Rate (C)     1
• Parallel (P)     1
• Voltage     2S (7.4V)
• Length (mm)     96
• Width (mm)     44
• Thickness(mm)     20
• Wire Gauge     20#
• Wire Length (C/D)  50mm / 100mm
• Connector Type     FUTABA
• Balancer Connector Type  JST-XHR

Gens ace 5300mAh 7.4V 65C 2S1P HardCase LiPo

• Capacity: 5300mAh
• Voltage: 7.4V
• Max Continuous Discharge: 65C (344.5A)
• Max Burst Discharge: 130C (689A)
• Weight: 306g
• Dimensions: 139 * 47 * 25 mm
• Balance Plug: JST-XH
• Discharge Plug: 4.0mm Banana toTplug
• Charge Rate: 1-3C Recommended, 5C Max

Gens ace Lipo 5500mAh 2S1P 7.4V 60C hard case 24# battery is suited for the following models: HPI 1/8 savage flux, VORZA FLUX HP, TRAXXAS 1/10 E-MAXX/E-REVO, 1/10 SLASH, XRAY 1/8 808E, SERPENT 1/8 811E, etc.

Spec:

- Product Type:lipo battery pack

- Capacity: 5500mAh

- Voltage: 7.4V

- Max Continuous Discharge: 60C

- Weight: 248g

- Dimensions: 139*48*24mm

- Balance Plug: JST-XHR

- Discharge Plug: T-plug

 DUPLEX 2,4EX Transmitter-Battery Power Ion 5200 for Transmitter DC/DS

JETI Power Ion RB 6200 7,2V

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800, 6200 – 2S2P are battery packs suitable to power the receiver and servos in the model.

The main advantages of Power-Ion accumulators include high mechanical resistance due to keeping  in a metal case. The accumulators are also characterized by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, short circuit protection is activated. Overcharge protection is activated if the charging voltage is higher than 5V per cell. The accumulators are functional even at very low or very high temperatures (-10 - +60°C).

Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.

Specification:

• Manufacturer:     Jeti
• Voltage [V]:     7.2
• Loading rate [C]:     2
• Cell number (LiPo):     2
• Maximum current [A]:     31
• Discharge rate [C]:     5
• Capacity [mAh]:     6200
• Battery Type:     Li-Ion

Jeti Power-Ion RX accumulators 2600 2S 7.2V

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.

The main advantages of Power-Ion accumulators include high mechanical resistance due to keeping  in a metal case. The accumulators are also characterized by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, short circuit protection is activated. Overcharge protection is activated if the charging voltage is higher than 5V per cell. The accumulators are functional even at very low or very high temperatures (-10 - +60°C).

Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.

Specification:

• Weight [g]     136
• Dimensions [mm] 104 x 47 x 32
• Sustained current [A]     20
• Peak current (max 30s) [A] 40
• Cell type     LiIon
• Capacity [mAh]     2600
• Rated voltage [V]     7.2
• Max. cell voltage [V]     4.2
• Max. battery voltage [V] 8.4

Jeti Power-Ion RX accumulators 5200 2S 7.2V

Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.

The main advantages of Power-Ion accumulators include high mechanical resistance due to keeping  in a metal case. The accumulators are also characterized by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, short circuit protection is activated. Overcharge protection is activated if the charging voltage is higher than 5V per cell. The accumulators are functional even at very low or very high temperatures (-10 - +60°C).

Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.

Specification:

• Weight [g] 230
• Dimensions [mm] 104 x 47 x 50
• Sustained current [A]     40
• Peak current (max 30s) [A] 80
• Cell type     LiIon
• Capacity [mAh]     5200
• Rated voltage [V] 7.2
• Max. cell voltage [V]     4.2
• Max. battery voltage [V] 8.4

Futaba Ripmax 2S1P 7.4V 3400mAh TX Li-Po, suitable for charging in FX-22 & FX-32 with P-FBC110 or P-FBC110/EUR.

Specifications

• Capacity:     3400mAh
• Max Continuous Discharge:     2A
• Max Charge Rate:     2A
• Voltage:     7.4v
• Type:     2S1P

Vapex LF99512 - 2-Cell 6.6V 1800mAh LiFe Transmitter Battery

This is a transmitter only rechargeable battery pack that fits some Futaba transmitters and also other radio brands.

Fits Futaba Transmitters:

• T4PM
• T4PLS
• T4GRS
• T4PV
• T4PX
• T6K
• T7PX
• T7XC (tight fit)
• T8J
• T10J
• T12K
• T14SG
• T16SZ
• T18SZ
• FX20
• FX36

Specs:

• For: Transmitters Only!
• Battery Type: 2s Lithium Ferrite - LiFePO4
• Voltage: Nominal 6.6V
• Energy: 12Wh
• Capacity: 1800 mAh
• Length: 83.2 mm
• Width: 39 mm
• Height/Thickness: 14.75 mm
• Weight: 85 g
• Wires: 22AWG / 100mm
• Connector: Futaba
• Balance Connector: XH
• Charging: 1.8A

Tech Notes:

Charge the battery outside the transmitter with a LiFe balance charger equipped with an Futaba adapter lead and XH balancing connector

Set the charger to ”LiFe”, 2s, 3.3v/cell

Specs:

• 2S 7.4V 2200 mAh 10C LiPo Receiver Battery
• Futaba connector
• Charge: Max 2.2A (1C)
• Max Discharge: 22A
• Volt cut-off: 6.0V
• Size: 87.6 x 23 x 13 mm
• Weight: 85 g
• Power: 16Wh

Sanyo eneloop Transmitter 8 cell NiMh Battery Pack AA - Flat at Graupner / JR plug-in system (9,6V-2000mAh)
 

•   eneloop transmitter battery of size AA - Flat / Graupner / JR plug-in system
•   Can be used straight after purchase and has a high performance
•   Long shelf life with no loss of energy and can be used everywhere
•   Cost effective in purchase and usage
•   Environmental friendly and easy to use

Product Features

High efficiency Low self-discharge Can be charged with the conventional NiMH-chargers
Dimensions: (L x H x W) 115 x 52,5 x 14,5 mm
Content: AA 8 pc(s) - Flat,GraupneR/JR plug
Capacity: 2000 mAh

What is exactly eneloop?

Eneloop is a combination of a rechargeable and a disposable battery the next evolutionary step for batteries into the 21st century.
SANYO can ship the batteries to Amazon in an already charged state, without losing its power, because of it very low self-discharge.
This means that you are purchasing an already charged battery. Eneloop is as user-friendly as a disposable battery. Once charged, it keeps its charge
for up to 6 to 12 months - (90 per cent of the charge after 6 months, 85 per cent after 12 months) In contrast to a disposable battery,
eneloop can be charged up to 1000 times, thus eliminating the waste of 999 disposable batteries. Using eneloop rechargeable batteries really does pay off.
Considering the cost of the eneloop battery, compared to a disposable battery, plus cost for the charger and the energy consumed by the charger,
The investment for one eneloop returns easily after a few charging cycles. Now there's an end to this spending.

What is the difference between the "old" and the "new" improved eneloop?

1. An extra of 500 charging cycles - instead of being rechargeable 1000 times, the new eneloop is even rechargeable up to 1500 times.

2. Improved self-discharge. Even though the self-discharge of the old eneloop was already very impressive, you can store
the new eneloop for 3 years and still it will retain 75% of its capacity.

3. You need a battery, which is reliable even when having cold temperatures? Before eneloop was suitable for temperatures as low as -10°C - now even until -20°C

Product information "Transmitter battery Panasonic Eneloop AA 8-cube 9.6 / 2000 Futaba"

Panasonic ENELOOP - The whole new way for batteries Benefits

• can be used immediately after purchase
• high performance
• long shelf life without loss of energy
• (very low self-discharge!)
• universally applicable
• > cheap to buy and use
• environmentally friendly
• easy to use

Specifications:

System: NiMH battery
Connection: Futaba / Cube
Voltage: 9.6 volts, capacity: 2000 mAh
Size: HR-3UTG / Mignon / AA / LR6 / UM3

Extremely slow self-discharge rate maintains 75 percent of capacity after 3 years of storage.
Can be charged up to 1,500 times (including partially) without experiencing memory effect.

Rechargeable up to 1500 times. 

Incorporating new technologies for material, manufacturing method and structure developed through the knowledge gained since the first release of eneloop the number of times a battery can be recharged has been increased by the factor 1.5 to approximately 1,500 times compared to the conventional models. With the ability to recharge the battery more times, the new “eneloop” is both more economically competitive and enhanced in environmental awareness as it means the amount of overall battery waste will be reduced.

Ready to use even after 3 years of storage.

Rechargeable batteries typically have a self-discharge characteristic which gradually reduces charged energy over time. This is considered the downside of typical rechargeable batteries. It renders them inconvenient since they can not be used immediately after being purchased, requiring the batteries to be charged to start using them and recharged if they have been left on the shelf for a period of time. Since eneloop batteries have a low self-discharge rate, they are pre-charged and usable immediately after purchase like dry cell batteries. The new eneloop battery continues this tradition by using SANYO’s original “super-lattice alloy” for negative electrode material and improvement of materials and structure, a fully-charged “new eneloop” battery can maintain approximately 75% of charged power even after 3 years, ensuring that power is available when needed.

• Eneloop by Panasonic is the next generation of environmentally friendly batteries.
• Pack of 4 Pre-Charged (Ready to use) AAA 930mAh Ni-MH Eneloop Pro Rechargeable Batteries.
• Charge up to an impressive 500 times, with an 85% capacity after 1 year.
• All Eneloop batteries are pre-loaded with environmentally friendly solar energy and ready for use immediately after purchase.
• Ready-to-use for every day use, these Eneloop Lite batteries come pre-charged for your convenience. Designed for high drain devices.