Roban

The Roban AH-64 Apache 700 size is a premium scale helicopter kit that brings the legendary attack helicopter to life in stunning detail. This model is part of Roban’s 800 class series and is engineered to provide exceptional realism for scale enthusiasts and experienced RC helicopter pilots.

Designed with military-grade accuracy, the AH-64 features a pre-painted fiberglass fuselage with factory-installed rivet and panel detailing, realistic Apache-style rotor head, and fully functional twin tail rotors. The highly detailed cockpit includes seats, consoles, and instrument panels, offering an impressive scale appearance.

This kit is based on a proven 700 mechanics system housed within a large 800 class airframe, delivering both flight performance and structural strength. The mechanics are fully integrated with a shaft-driven tail, aluminum rotor head, and CNC-machined components for precise operation.

Features :

• Highly detailed AH-64 Apache scale fuselage (pre-painted)
• 700-size mechanics inside 800-class airframe
• Fully detailed cockpit with seats and instrumentation
• Pre-installed rivet, panel and access door detailing
• Functional twin tail rotor system
• Scale landing gear and weapon system mounts
• Carbon frame structure for strength and reduced weight
• CNC aluminum rotor head and tail rotor assembly
• Shaft-driven tail rotor system
• Pre-installed LED light system (requires controller)

Technical Specifications :

• Model: Roban AH-64 Apache
• Scale: 700 Size (fits 800 class fuselage)
• Length: approx. 1480mm
• Fuselage Width: approx. 200mm
• Height: approx. 330mm
• Main Rotor Diameter: approx. 1670mm
• Tail Rotor Diameter: approx. 270mm
• Weight (empty): approx. 4.5–5kg

Recommended Setup (not included) : 

• Brushless motor (450–520kV for 12S)
• ESC: 120–160A HV
• Voltage regulator (BEC) - Castle Creations 20A BEC Pro / Jeti or equivalent
• Servos: 3x cyclic (MKS DS1220 High Torque Servo Multi-Pack or equivalent)
• Tail Servo : MKS HBL575 - MKS-HBL980 or equivalent
• Flybarless system (e.g. BeastX, Spirit, Bavarian Demon, VBar)
• Remote Control & Receiver 7 channels minimum, recommanded 8 channels
• 2x 6S LiPo batteries (5000–6000mAh)
• LED controller module (for lighting)

Included in the Kit :

• Pre-painted AH-64 Apache fiberglass fuselage
• Complete 700-size mechanics (assembled)
• Scale rotor head and tail assembly
• Functional LED system pre-installed
• Detailed cockpit 2 seater and canopy
• Landing gear and scale weapon holders
• Carbon main frames and hardware
• 4 carbon fiber rotor blades
• 4 carbon fiber tail rotor blades

Note: This is an ARF (Almost Ready to Fly) scale kit. Electronics and batteries are not included.

Bring one of the most iconic helicopters ever built to life with the Roban AH-64 Apache. Whether static or in flight, this 700-size scale model delivers unmatched presence, realism, and detail.

This is the Roban Airwolf Scale 800 ARF, a premium scale kit that offers unparalleled detail. From tip-to-tail the Airwolf body kit displays an accuracy of detail to the fictional full scale aircraft from the TV series, the kind of attention to detail not normally seen in the RC helicopter hobby.

This kit comes with a fully illuminated scale detail cockpit with illuminated instrument panel and overhead panel, joysticks, rudder pedals, aerials, windshield wipers, antenna, weapons, rockets, the special camera on each side of the fuselage and more. Floor and ceiling details can be crafted so once the interiors are installed you have an impressively scaled cockpit/interior. This kit includes electric retracts that are easy to install for that extra level scale appeal.

These scale kits house the cockpit in precisely the right location and the mechanics are built into the engine compartment just like in the full scale version. The Airwolf really impresses with the highly detailed and accurately scaled down profile.

Features:

• 2 Blade rotorhead and scale carbon fiber rotor blades
• 2 Tail blade head and scale carbon fiber tail blades
• Extremely detailed surface with molded panel lines and rivets
• 3-Point electric retract system for the ultimate scale finishing touch
• Completely illuminated scale cockpit
• Complete built In / partially pre-installed position lighting system (Controlled via AUX channel)
• Special CCPM mechanics built in the top section like the full scale
• Take off weight of 9kg (19.8 pounds)
• 1794mm long (71")

Includes:

• Roban Airwolf 800 size scale body
• Full 800 size helicopter mechanics
• 2 Carbon fiber rotor blades
• 2 Carbon fiber tail blades
• Complete illuminated scale cockpit
• Complete built in / partially pre-installed position lighting system
• 3-Point electric retract system (not installed)

Required for Operation (Not Included):

Motor: 1x brushless outrunner , 12S capable
Speed controller: 1x 120A brushless, 12S capable
Servo: 3x metal gear cyclic, 1x metal gear tail servo
Battery: 44.4V 5000mAh 35C (2 x 6Cell LiPO)
Flight time: 8 minutes
Takeoff weight: 8000g
Flight Stabilization: 3 axis flybarless gyro
Radio Control: min. 7 channel with pitch and throttle curves

Specifications.

• Body length: 1794mm
• Length incl. rotors: 1960mm
• Width: 580mm
• Height: 510mm
• Main rotor diameter 1660mm
• Main blade length: 750mm
• Fenstron diameter: 160mm
• Tail blade length: 70mm
• Main shaft diameter: 12mm
• Tail shaft diameter: 5mm
• Spindle diameter: 8mm
• Main blade count: 2
• Tail blade count: 9
• Drive gear ratio: 1:13.8:4.7
• Motor:* 1x 750MX 450KV brushless outrunner , 12S capable
• Speed controller:* 1x 120A brushless, 12S capable
• Servo:* 3x metal gear cyclic, 1x metal gear tail servo
• Battery:* 44.4V 5000mAh 35C
• Flight time: 8 minutes
• Takeoff weight: 8000g
• Flight Stabilization:* 3 axis flybarless gyro
• Radio Control:*
• min. 6 channel with pitch and throttle curves

Fine finish and detailed cockpit. Full Scale design locates the cockpit exactly in the right place. The compact mechanics are integrated into the engine compartment, just like on a real helicopter, thus allowing space for the front and rear cockpit seats. The pre-installed position light system is programmable with 9 different patterns.the helicopter is supplied with a detailed instruction manual.the configuration and assembly is simple and fast, the mechanics are fully pre-assembled - but need to be configured with the electronics.only screwdrivers and allen keys are needed to make it operational

Features :

• 4-blade rotor head + carbon fiber rotor blades
• True-to-scale carbon fiber Fenestron blades included
• Numerous details: rivets and plates...
• Scale cockpit with seats (front and rear)
• Complete integrated/pre-installed position lighting system (controllable via auxiliary channel)
• Special CCPM mechanics integrated into the upper covers, just like the real helicopter
• The product is pre-assembled and requires little assembly work.

Technical data :

• Length of the housing: 1760mm
• Length incl. rotors: 1960mm
• Width: 360mm
• Height: 570mm
• Diameter of the main rotor: 160mm
• Length of the main rotor blade: 750mm
• Diameter of the fenestron: 160mm
• Length of the tail blade: 70mm
• Diameter of the main shaft: 12mm
• Diameter of the tail shaft: 5mm
• Spindle diameter: 8mm
• Number of main blades: 2
• Number of rear blades: 9
• Gear ratio:1:13,8:4,7

Scope of Delivery : 

• AS365 fuselage GRP molded and painted
• Aluminum landing gear
• Mechanical HSM-800
• 4-blade main rotor head
• Fenestron tail rotor unit
• Main rotor blades
• Cockpit switched on
• Seat rows
• Lighting
• Scale parts
• Installation kit
• Instructions

Still needed :

• Motor: 1x 700-800 SIZE 450-500KV brushless outrunner, 12S capable
• Speed controller: 1x 120A brushless, 12S capable
• Servo: 3x metal gear cyclic standard servo, 1x metal gear rear servo tail standard
• Battery: 44.4V 5000mAh 35C
• Take-off weight: 8000g
• Flight stabilization: 3-axis flybarless gyro ( Microbeast, Vbar, Bavarian )
• Radio control: min. 6-channel with pitch and throttle curves

The Roban B407 SkyNews Edition is a stunning, highly detailed 700-size scale helicopter kit that replicates a civilian news helicopter livery with precision and flair. This model features a vivid red, black, white, and yellow pre-painted fiberglass fuselage with full SkyNews markings, making it a showstopper in any hangar or airfield.

Designed around a full 800-class fuselage, this kit houses proven 700-size mechanics and offers exceptional flying stability with beautiful scale accuracy. The body includes rivets, panel lines, detailed window framing, and a fully built cockpit interior with seating, dash panels, and pilot controls.

The mechanics are engineered with a shaft-driven tail system, CNC aluminum rotor head, and carbon-reinforced structure, giving the B407 SkyNews high performance as well as authentic looks. The kit comes ARF (Almost Ready to Fly), with lighting system pre-installed (controller required).

Features :

• Pre-painted red/black/white/yellow SkyNews fiberglass fuselage
• Fully detailed interior with cockpit seating and instrument panels
• 700-size mechanics in a large 800-class fuselage
• Pre-installed rivets, panel lines, access doors and window framing
• Clear panoramic windows with scale detailing
• Functional sliding side doors
• Shaft-driven tail rotor system
• CNC aluminum rotor head and tail mechanics
• Carbon fiber frame and mounting structure
• Pre-installed LED light system (controller not included)

Technical Specifications :

• Model: Roban B407 SkyNews
• Scale: 700-size mechanics with 800-size scale body
• Length: approx. 1480 mm
• Height: approx. 330 mm
• Main Rotor Diameter: approx. 1670 mm
• Tail Rotor Diameter: approx. 270 mm
• Weight (empty): approx. 4.5–5 kg

Recommended Electronics (not included) :

• Brushless motor (450–520kV for 12S)
  
• ESC: 120–160A HV
  
• Servos: 3x cyclic (MKS DS1220 High Torque Servo Multi-Pack or equivalent)
• Tail Servo : MKS HBL575 - MKS-HBL980 or equivalent
  
• Flybarless system (e.g. BeastX, Spirit, Bavarian Demon, VBar)
  
• 2x 6S LiPo batteries (5000–6000mAh)
  
• LED controller module (for lighting)
• Remote control & Receiver 6 channels minimum is required

Kit Includes :

• Pre-painted fiberglass SkyNews B407 fuselage
• Pre-installed scale details and decals
• Fully assembled 700-size mechanics
• Rotor head and tail mechanics (CNC)
• Scale landing gear and details
• Detailed cockpit interior
• LED lighting system (pre-installed)

Note: This kit is ARF – Almost Ready to Fly! The Electronics, flybarless unit, and batteries are not included.

The Roban B407 SkyNews is a visually striking civilian-scale helicopter that delivers both flying performance and stunning realism. Ideal for collectors, scale flyers, and media-themed RC projects.

This is the Roban EC-135 ADAC 800 Size ARF, a premium-scale helicopter kit renowned for its exceptional attention to detail. From nose to tail, the EC-135 fuselage delivers a stunning level of realism that closely mirrors the full-size aircraft—something rarely seen in the RC helicopter world.
The kit features a fully illuminated, true-to-scale cockpit, complete with a lighted dashboard, joysticks, rear pedals, antennas, windshield wipers, and other intricate details. It also includes a complete rear cabin interior (not pre-installed), allowing you to customize the cockpit further with detailed floor and ceiling panels for a truly immersive build.
Roban’s smart engineering places the cockpit exactly where it belongs, while the mechanical components are discreetly integrated into the engine bay—just like on the real EC-135. The result is a highly realistic and faithfully scaled model that will impress even the most experienced RC enthusiasts.

Features :

• 4-blade rotor head with true-to-scale carbon fiber rotor blades
• Upgraded: 9-blade 160 mm Fenestron with full-scale carbon fiber tail rotor blades that allow 30% negative thrust and provide a low-power tail servo at full speed
• Extremely detailed finish with molded panel lines and rivets
• Fully detailed 7-seater cockpit
• Fully integrated or partially pre-assembled position light system (controllable via AUX channel)
• Special CCPM mechanism in the upper section, analogous to the original
• Take-off weight approx. 8 kg
• Overall length: 1765 mm (scale 1:8)

Technical data :

• Skill level: Expert
• Building time: 4+ hours
• Class / Size: 800
• Drive type: Electric
• Rotor system: Collective Pitch
• Fuselage material: Fiberglass
• Overall dimensions (L x W x H): 1960 x 355 x 510 mm
• Flying weight: 8000 g
• Main rotor diameter: 1660 mm
• Main rotor blade length: 750 mm
• Tail rotor diameter: 160 mm
• Tail rotor blade length: 70 mm
• Tail drive: Torque tube
• Cyclic Standard Servo : x3
• Tail Standard Servo : 1x
• Power system: ~500Kv brushless motor
• Electronic speed controller: 160A
• Recommended battery: 2x 6S 22.2V 5000 mAh in series for 12S
• Required remote control & receiver: 8-channel
• Recommended operating environment: Outdoor area

Scope of delivery :

• Roban EC-135 ADAC 800 size scale fuselage
• Complete 800 size helicopter mechanics
• 4 carbon fiber rotor blades
• 9-blade 160 mm Fenestron
• Complete 7-seater cockpit
• Fully integrated or partially pre-assembled position light system

Still required :

• Helicopter flight control system: (recommended: Microbeast Flybarless System, Vbar, Bavarian)
• Electronic speed controller (ESC): (recommended: 160A Minimum Castle Creations, Scorpion, YGE)
• Battery monitor (BEC): (recommended: Castle Creations 20A BEC Pro, Jeti)
• Brushless motor: (recommended: 4230-465kV to 520kV)
• Three cyclic servos: (recommended: MKS DS1220 High Torque Servo Multi-Pack or equivalent)
• Tail servo: (recommended: MKS HBL575 - MKS-HBL980 or equivalent)
• 12-cell 44.4V 5000 mAh LiPo battery: (recommended: 5000 mAh 6S 22.2V 50C LiPo in series)
• Remote control: At least 8-channel
• Receiver: At least 8-channel

Discover the Roban EC-225 Super Puma — a premium 800-size scale helicopter kit with exceptional realism. From the fully illuminated cockpit to the finely detailed fuselage, every element mirrors the full-size aircraft with unmatched precision. This kit includes a full rear cabin interior (not pre-installed), customizable floor and ceiling panels, and mechanics discreetly integrated into the engine compartment—just like the real thing. Designed for expert builders, both ARF and KIT versions require your own electronics. Minor adjustments may be needed for a perfect fit, as each fuselage is handcrafted to scale perfection.

This model is available in three different color schemes: ERA, White, and Dancopter.
Feel free to contact us for availability.

Features :

• 5-blade rotor head with true-to-scale carbon rotor blades
• 4-blade tail rotor with carbon tail rotor blades
• Extremely detailed finish with molded panel lines and rivets
• Full 7-seat cockpit
• Built-in, partially pre-installed position light system (controllable via AUX channel)
• CCPM mechanics in the upper section like the original
• Take-off weight approx. 9 kg
• Length: 1700 mm, scale 1:8

Technical data :

• Size: 800
• Drive type: Electric
• Rotor system: Collective pitch
• Fuselage material: GRP (fiberglass)
• Overall dimensions (L x W x H): 1980 x 410 x 515 mm
• Flying weight: 9,000 g
• Main rotor diameter: 1540 mm
• Main rotor blade length: 700 mm
• Tail rotor diameter: 280 mm
• Tail rotor blade length: 105 mm
• Tail drive: Torque tube
• Servos required: 3x cyclic servos + 1x tail servo
• Recommended motor: 500Kv brushless
• Electronic speed controller: 160A high voltage
• Recommended battery: 2x 6S 22.2V 5000 mAh LiPo (in series for 12S)
• Remote control required: 8-channel
• Difficulty level: Expert
• Build time: 4+ hours
• Application: Outdoor use

Scope of delivery :

• EC-225 scale fuselage
• Complete 800 series helicopter mechanics
• 5-blade rotor head with carbon rotor blades
• 4-blade tail rotor with carbon tail rotor blades
• Full 7-seat cockpit
• Position light system (partially pre-installed)

Still required :

• Flight control system
• Electronic speed controller (ESC) 160A Min.
• Solid Voltage regulator (BEC)
• Brushless 700-800 Size Motor ~500Kv
• Standard 3x Cyclic servos
• Standard Tail servo
• 12S 44.4V 5000mAh LiPo battery
• At least 8-channel remote control
• At least 8-channel receiver

Fine finish and detailed cockpit. Full Scale design locates the cockpit exactly in the right place. The compact mechanics are integrated into the engine compartment, just like on a real helicopter, thus allowing space for the front and rear cockpit seats. The pre-installed position light system is programmable with 9 different patterns.the helicopter is supplied with a detailed instruction manual.the configuration and assembly is simple and fast, the mechanics are fully pre-assembled - but need to be configured with the electronics.only screwdrivers and allen keys are needed to make it operational

A full Yellow version of this fuselage is available. Feel free to contact us for availability.

Features :

• 4-blade rotor head + carbon fiber rotor blades
• True-to-scale carbon fiber Fenestron blades included
• Numerous details: rivets and plates...
• Scale cockpit with seats (front and rear)
• Complete integrated/pre-installed position lighting system (controllable via auxiliary channel)
• Special CCPM mechanics integrated into the upper covers, just like the real helicopter
• The product is pre-assembled and requires little assembly work.

Specifications :

• Fuselage length: 1765mm
• Length with blades: 1960mm
• Fuselage width: 355mm
• Height: 510mm
• Rotor diameter: 1660mm
• Length of blades: 750mm
• Fenestron diameter: 160mm
• Length A/C blades: 70mm
• Main shaft: 12mm
• A/C shaft: 5mm
• Main blades: 4
• Fenestron blades: 9
• Drive gear ratio: 1:13.8:4.7
• Flight time: ~5 minutes
• Flight weight: 8000g
• Main rotor speed: 1300 rpm
• Fenestron speed: 15600 rpm

Scope of Delivery :

• EC-135 fuselage GRP molded and painted
• Aluminum landing gear
• Mechanical HSM-800
• 4-blade main rotor head
• Fenestron tail rotor unit
• Main rotor blades
• Cockpit switched on
• Seat rows
• Lighting
• Scale parts
• Installation kit
• Instructions

Still Needed to complete :

Motor: 1x700-800 size 450KV brushless outrunner, 12S capable - and up to 530kV
Controller: 1x 120A brushless HV, 12S capable
Servos: 3x metal gear cyclic, 1x metal gear tail servo
Battery: 2x 6S 5000mAh
Gyro: 3 axis flybarless gyro (e.g. microbeast)
Radio control: 6 channels minimum (with heli mode)

Discover the Roban MD-500E G-JIVE Blue – 800 Size ARF, a premium-scale helicopter kit crafted for true enthusiasts. From tip to tail, this model delivers exceptional realism, with an attention to detail that faithfully replicates the full-size MD-500E—something rarely seen in the RC helicopter world.
The kit features a fully illuminated and true-to-scale cockpit, including a lighted dashboard, joysticks, rear pedals, antennas, windshield wipers, and many other fine details. A complete interior layout for the rear cabin is also included (not pre-assembled), offering the opportunity to build a stunningly realistic cockpit with customizable floor and ceiling panels.
True to Roban’s engineering philosophy, the cockpit is positioned exactly where it should be, while the mechanical components are neatly housed in the engine bay—just like the original helicopter. The result is a highly detailed, professionally scaled replica, perfect for experienced RC pilots looking for an authentic build and flying experience.

This Roban 800 Size MD-500E is also available in the "Magnum" fuselage version. Contact us to check availability. 

Features :

• 5-blade rotor head with true-to-scale carbon fiber rotor blades
• 2-blade tail rotor with true-to-scale carbon fiber tail rotor blades
• Extremely detailed surface with molded panel lines and rivets
• Complete, highly detailed 4-seater cockpit
• Fully integrated or partially pre-assembled position light system (controllable via AUX channel)
• Special CCPM mechanics in the upper section, analogous to the original
• Take-off weight approx. 8 kg

Technical data :

• Skill level: Expert
• Build time: 4+ hours
• Class / Size: 800
• Drive type: Electric
• Rotor system: Collective Pitch
• Fuselage material: Fiberglass
• Overall dimensions (L x W x H): 1980 x 590 x 645 mm
• Flying weight: 8000 g
• Main rotor diameter: 1570 mm
• Main rotor blade length: 700 mm
• Tail rotor diameter: 280 mm
• Tail rotor blade length: 45 mm
• Tail drive: Torque tube
• Cyclic Standard Servo : x3
• Tail Standard Servo : 1x
• Power system: ~500Kv brushless motor
• Electronic speed controller: 160A
• Recommended battery: 2x 6S 22.2V 5000 mAh in series for 12S
• Required remote control & receiver: 8-channel
• Recommended operating environment: Outdoor area

Scope of delivery :
• Roban MD-500E G-JIVE 800 size scale fuselage
• Complete 800 size helicopter mechanics
• 5 carbon fiber rotor blades
• 2 carbon fiber tail rotor blades
• Complete 4-seater cockpit
• Fully integrated or partially pre-assembled position light system

Still required :

• Helicopter flight control system: (recommended: Microbeast Flybarless System, Vbar, Bavarian)
• Electronic speed controller (ESC): (recommended: 160A Minimum Castle Creations, Scorpion, YGE)
• Battery monitor (BEC): (recommended: Castle Creations 20A BEC Pro, Jeti)
• Brushless motor: (recommended: 4230-465kV to 520kV)
• 3x Cyclic servos: (recommended: MKS DS1220 - HBL950 High Torque Servo or equivalent)
• Tail servo: (recommended: MKS HBL980 - MKS-HBL575 or equivalent)
• 12-cell 44.4V 5000 mAh LiPo battery: (recommended: 5000 mAh 6S 22.2V 50C LiPo in series)
• Remote control: At least 8-channel
• Receiver: At least 8-channel