Ripmax

Futaba S.BUS Adaptor Plug

This S-BUS adapter lead connects the gold connector in the root rib to 3 pole socket in the batetry backer.
Both plugs have locks, which ensure a reliable contact, but also easily released. The plug connection is polarity-protected.
Dependent upon the application, the S-BUS wiring may be split at the wing or battery backer.

S.BUS Adaptor Socket

Servo lead with fixed socket- Futaba socket for universal usage For example, as a charge socket or wing connector plug for aircraft models, or elevator connector for large models, as well as S.BUS wing connector, etc.

Lead length approx. 30 cm.

Futaba S.BUS HUB-2 Lead 0.5mm 300mm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
 

 

Authentic battery with BMS to suit the T18SZ, T4PKS, T4PL, T14SG, T8J & T6J.

Specifications

• Weight:     105g
• Capacity:     2100mAh
• Dimensions:     78 x 41 x 16mm
• Voltage:     6.6V
• Type:     Li-Fe

 

Avoid nasty wing tip 'scuffing' by fitting these small, tough nylon skid. The lightweight tail skid is ideal for those who don't want the weight of a tail wheel but need to keep the rudder out of the grass

set of 2.

Futaba Ripmax 2S1P 7.4V 3400mAh TX Li-Po, suitable for charging in FX-22 & FX-32 with P-FBC110 or P-FBC110/EUR.

Specifications

• Capacity:     3400mAh
• Max Continuous Discharge:     2A
• Max Charge Rate:     2A
• Voltage:     7.4v
• Type:     2S1P

• High quality, high performance servo intended to appeal to discerning modellers that only want the best.
• All metal case, CNC machined from solid Aluminium for the very best in strength and rigidity
• Ball-race
• Coated metal gears
• Regular motor and digital amplifier providing the perfect solution to your servo needs.

Specifications

• Dead band: 1μs
• Motor: coreless motor
• Working frequence: 1520μs / 330hz
• Operating Voltage:  DC4.8~6.0 V
• Operating Temperature Range: -10 to + 60°
• Operating Speed (4.8V): 0.09sec/60°
• Operating Speed (6V): 0.08 sec/60°
• Stall Torque (4.8V): 3.2kg.cm
• Stall Torque (6V): 4.2kg-cm
• Potentiometer Drive: Direct Drive
• Dimensions: 23X12X27.6 mm
• Weight:  20.3 g (0.72oz)
• Connector Wire Length: JR  220 mm
• Bearing: 2BB

This high quality, high performance servo is intended to appeal to discerning modellers that only want the best. It's plastic case, ball-race, metal gears, regular motor and digital amplifier provides the perfect solution to your servo needs at an unbelievable price.

If speed at a great price is what you need, this is the servo for you! The case centre is CNC machined from solid Aluminium for the very best in strength and rigidity. The Main Case is made from plastic to provide you this servo without the high price tag.

Check through the specifications and performance and we are sure you will agree!

Specifications

• Operating Voltage:  DC4.8~6.0 V
• Operating Speed (4.8V): 0.13sec/60°
• Operating Speed (6V): 0.11 sec/60°
• Stall Torque (4.8V): 3.0kg.cm (42 oz/in)
• Stall Torque (6V):  3.5 kg.cm (49 oz/in)
• Dimensions:29.5x11.6x30.2cm/1.17x0.46x1.20in
• Weight:  17.5 g (0.61oz)

 

 

Operating Voltage:  DC4.8~6.0 V
Operating Temperature Range: -10 to + 60°C
Operating Speed (4.8V): 0.16sec/60°
Operating Speed (6.0V): 0.13 sec/60°
Stall Torque (4.8V): 4.8kg.cm
Stall Torque (6.0V): 5.8kg.cm
Potentiometer Drive: Direct Drive
Dimensions: 30.0X10.0X35.5mm /1.18 X0.39X1.40 in
Weight:  21 g (0.74oz)
Connector Wire Length: JR/Futaba 220 mm
Bearing: 2BB