Radiolink

Mini Pix flight controller is a compact version of another popular RadioLink Pixhawk controller. Perfectly compatible with RadioLink TS100 mini GPS M8N module.

Features

• Processor: STM32F405VGT6
• Gyroscope: MPU6500
• Compass: QMC5883L
• Barometer: LPS22HB
• Connector: JST GH
• Mavlink UART: 2 (with CTSRTS)
• GPS UART: 1
• RC input signal: PPM/SBUS
• RSSI input signal: PWM/3.3V
• I2C: 1
• PWM input: 6 OneShot/PWM output
• Operating Voltage: 5.1V
• USB: 5V +-0.3V
• Operating Temperature: -40 to +80 degrees Celsius
• Size: 39 x 39 x 12mm
• Weight: 12g (without wires)

Accessories

• 1 x Radiolink Mini Pix flight controller
• 1 x buzzer and emergency stop button
• 1 x power module
• 1 x buzzer connection cable
• 1 x receiver and RSSI connection cable
• 1 x power module connection cable
• 1 x OSD connection cable

Telemetry Technical Specifications

Weights & Dimensions

Weight	14g	0.49oz
Shipping Weight	0.08kg	0.17lbs
Product Width	39mm	1.54in
Product Length	39mm	1.54in

RadioLink AT10 2.4GHz 10CH Remote Control System 10 Channel Transmitter Receiver R10D for RC Helicopter/Plane- orange version

Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio.

3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.

Great control distance: 1.1km on the ground,2km in the sky. Expansion feedback module,users can get plane details in real time. Make very setting clear and exactly output result.

Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.

High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.

Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology.

Unbelievable price, high quality as supper bland, and more exactly, faster response, higher resolution,one and the only one anti-jumping DSSS technology.really worthy to have it.

Technical Parameter:

•     Dimension:18×9.5×22cm;
•     Weight:0.95kg;
•     Frequency:2.4GHz ISM band(2400MHz~2485MHz);
•     Modulation mode:QSPK;
•     Channel bandwidth:5.0MHz;
•     Spread spectrum:DSSS;
•     Adjacent channel rejection:>38dBM;
•     Transmitter power:  <100mW(PCB testing), <20dBm(3 meter air testing);
•     Operating Voltage:8.6~15V;
•     Operating Current:<95mA;
•     Control distance:800 meters ground;
•     Channel:10 Channel,8~10 channel are customizable;
•     Compatible model: Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider,five flying model;
•     Simulator model:under the simulator model the transmitter action turn off,change to power saving model;
•     Screen:16 colorful screen,size 78×52mm,320*480 pixel.

Package list:

• 1 * RadioLink AT10 10CH Transimitter (Model 2)
• 1 * R10D 10Ch Receiver
• 1 * PRM-01 Voltage Return Module
• 1 * 4Pin Connector
• 1 * Manual

Get extra receiver free!!!  The AT9 IS A new radio which can be compatible to RC copter, fixed-wing airplane and so on. Meanwhile, the new remote controller makes the first progress towards its outer structure, and everyone will be obsessed with AT9 for the first sight. Namely, there are three three-way switches, four two-way switches, one return switch and four adjustable potentiometers, all of which are in neat arrangement providing both power and elegance sense. The most important thing is, RadioLink AT9 is completely designed in line with human ergonomics, effectively making enthusiasts more comfortable while using it.

In addition, the mini receiver is another progress of AT9. It is said that the receiver is of super mini size, very convenient to install and suitable for playing mini models. What’s more, the receiver is compatible to S-BUS, which can perfectly support multi-rotor aircraft. Due to its small size and light weight, the receiver really reduce much burden for a certain aircraft.it is widely recognized that some remote controller support online upgrade As for AT9, you can reach upgrade just via the mobile phone USB data wire.

Last but not least, RadioLink AT9 owns wonderful vibration alarm. If you are experienced enthusiasts, you must know that traditional alarm can’t be head in relatively noisy environment. Only vibration alarm can make a distinctive warming to protect your aircraft

Both helicopter model and airplane model are available.

2.Function and performance updated with better safety.

3.Faster response.

4.All seven Channels have trim setting function and none interference between one another from channel 1 to channel 6 under CCPM mode.

5. Transmitter hops spectrum while powering on

6.Transmitter will detect whether the current spectrum channel was occupied when its power on, and it will hop to the next one until which it’s not occupied. The receiver will search and match with the transmitter which shares the same identity code.

7.6. Code matches wirelessly

8.Each transmitter has a unique identity code of its own, the receiver will search and bind with the nearest transmitter while pressing the code matching button on it. There is no need to match again in future use once its matching successfully.

9.7. High anti-interference capability

10. Adoption of FHSS technology makes our products have excellent anti-interference capability, and helps the models always be in control easily.

11. 8.High suppression ratio of Adjacent Channels

12. 9 .Fully comply with FCC&CE standards

13. 10.Stable RF range

14. With FHSS technology, its control range reaches 350 meters on ground and 700 meters in air.

15. 11. Throttle on right/left-hand interchangeable.

16. 12. LCD screen, manual programming is available. (Model type ACRO: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve,programmable mix 1,programmable mix 2, flaperon mixing, flap trim, v-tail mixing, elevon mixing and auxiliary function. Model type HELI: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve, normal pitch curve, idle-up throttle curve, idle-up pitch curve, throttle hold, revolution mixing, gyro sensitivity, swash-throttle mixing/ swashplate types and auxiliary function.)

17. 13. Low-battery warning function

18. The low battery alarm continuously beeps and LED flashes when voltage drops to 8.6V. 14.Trainer cable,power charging jack.

Technical Parameters

• Size:17cm*8.5cm*20cm
• Weight:560g (battery not included)
• Transmitting on 2.4G band
• Modulation:FHSS
• Operating system: 2-stick, 7-channel system
• Power supply: 12V battery (8 pieces 5# batteries)
• Current drain: 87mA(Energy Saving)
• MODE -All (user changeable)
• Color can be varied, White or gray
  

OSD Telemetry module transmits the data from the flight controller and shows the data of SPEED, RISE, THRO, VOLT, LATI, LONG, ALT, GPS, RSSI, MODE, YAW, ROLL, PITC, DIST in the display screen of AT9 or AT10.

Introduction:
1. Please upgrade your AT9 firmware to V1.2.6(OSD).(1)AT10 firmware to V1.0.6(OSD).
2. So far, this OSD telemetry module is compatible with PIX and APM.
3. OSD telemetry module can work with both R9D and R10D.

Attention :

1.No output if USB connect flight-controller and computer.

2.No VOLT information if use UBEC, have to offer electricity for flight-controller by volt ammeter.

3.Have to short-circuit the MUX-TXO/OSD of APM when connect PRM-02(OSD) to APM.

Size: 33*15mm

Weight: 6g (including connector)

Description:

Brand Name: RadioLink
Item Name: Power return module
Dimension: 38*26*12mm
Weight: 6.5g (without cable)
Usage: Used for RadioLink AT9,AT10 transmitter
Features: Display flight data on the transmitter screen
Display Information Included: signal strength, receiver voltage, battery voltage, temperature, engine speed, GPS location

Package Included:
1x RadioLink PRM-01 Power return module
1x Data cable

Radiolink R9DS, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S and AT10.
SBUS and PWM signal possible working at the same time

Two signal working mode:

(1)PWM signal output working mode：red LED indicates PWM signal output, 9 channels Totally.
(2) SBUS signal output working mode: blue/purple LED indicates SBUS signal output, 10 channels totally. SBUS and PWM signal possible working at the same time with SBUS signal output working mode. CH9 output SBUS signal, the original CH1 to CH4 output CH7 to CH10 PWM signal at the same time.

SBUS and PWM signal change：

Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS. The red LED indicates the normal PWM and blue/purple LED indicates SBUS signal.

How to match code with transmitter:
1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R9DS.
3. Connect CH3 of R9DS to ESC.
4. There is a black button on the R9DS, use a thin stick press the button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on!

• Channels: 10 channels S-Bus, 9 channels PWM
• Compatibility: AT9,AT9S, AT10
• Channel output: S-Bus & PWM
• Working voltage: 4.8 - 10v
• Working current: 38 - 45mA @ 5v
• Precision: 4096 , 0.25us per section
• Telemetry: integrate telemetry sensor including signal strength and voltage
• External telemetry: supported by module PRM-01 and module PRM-02