Pro-DIY Connectors

This is a set of Connectors Male- Female, Locking type, 3 Pins with cable

Accepting wires from 20-24 AWG( Servo normal or heavy duty)

This connector is professional grade, Alows 100v, 3 Amps per wire.

Set comes with Male, Female, Pins and Heavy duty servo wire 0.5mm2 (choose length)

You will need to attach/crimp the wire to pins by Yourself.

This is a set of Connectors Male- Female, Locking type, 3 Pins DIY

Accepting wires from 20-24 AWG( Servo normal or heavy duty)

This connector is professional grade, Alow 100v, 3 Amps per wire.

Set INCLUDING:

• 10 X Male housings with Pins
• 10 X Female housings with Pins
• 1M Cable silicone made in germany
  
• Comment-Not assembled, DIY
  

Flexible coaxial cable are ideal for applications where tight bends and continual flexure are required. S-conn RG316/U is a single shielded flexible coax cable with FEP jacket and compatible with a wide selection of connector types. This RG316 coaxial cable has a stranded inner conductor for better flexibility and operates up to 3 GHz. The Flexible structure of the cable makes it suitable for indoor/outdoor uses and high temperature applications.

RG316 Coaxial Cable Specs

• Conductor: Silver-coated copper-plated steel
• Dielectric: Pure PTFE
• Screen: Silver-plated copper braid
• Jacket: Fluoridated ethylene polypropylene
• Characteristic impedance: 50 +/-2-ohms
• Maximum voltage: 1,200-volts
• Operating temperature range: From -55ºC to 200ºC
• Propagation velocity: 69.5% of the speed of light
• Maximum frequency: 3 GHz
• Attenuation at maximum frequency: 47 dB per foot
• Power at maximum frequency: 93 watts

Choose the length in options :

Our tool frame is made  from top quality hardened Steel for long life use, it features a ratchet controlled cycle mechanism to ensure a correct crimp every time and is fitted with a precision manufactured die set to crimp coaxial connectors with very small diameter cables RG316, RG179 , RG174Cables, SMA SMB MCX TNC SMC BNC Connectors.

The Crimp tool hexagonal across flats dimensions are:

.042''(1.07mm)
.068''(1.73mm)
.078''(1.98mm)
.128''(3.25mm)
.151''(3.84)
.178''(4.52mm)

Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Carry Case

Jaw set 58B：0.25-1.5 24-16AWG Suitable for Plug spring terminal

Jaw set 02C：0.25-2.5 22-14AWG Suitable for Pre insulated terminal

Jaw set 06WF：0.25-6.0 24-10AWG Suitable for Tubular terminal

Jaw set 2546B：2.5-6.0 22-14AWG Suitable for MC4 terminal

Jaw set 2549：0.08-1.0 28-18AWG Suitable for Bare terminal

Jaw set 6：0.5-6.0 24-16AWG Suitable for Bare terminal

Jaw set 03H：1.07，1.72，1.98，3.25，4.52 Suitable for Coaxial cable

Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Case

Jaw set 58B：0.25-1.5 24-16AWG Suitable for Plug spring terminal

Jaw set 02C：0.25-2.5 22-14AWG Suitable for Pre insulated terminal

Jaw set 06WF：0.25-6.0 24-10AWG Suitable for Tubular terminal

Jaw set 2546B：2.5-6.0 22-14AWG Suitable for MC4 terminal

Jaw set 2549：0.08-1.0 28-18AWG Suitable for Bare terminal

Jaw set 6：0.5-6.0 24-16AWG Suitable for Bare terminal

Jaw set 03H：1.07，1.72，1.98，3.25，4.52 Suitable for Coaxial cable

DIY High quality connector- RP SMA Female crimp connector for RG316 cable, Set, with Hardware

• Gender : Male (Plug)
• Impedance : 50 Ohms
• Frequency : up-to 12.4 GHz
• VSWR : 1.1+0.01 x f (GHz)
• Connector Body : Brass
• Finish : Gold plated
• Delivered with hardware as per photo
  

DIY High quality connector- RP-SMA Male Crimp Connector for RG-316 Cable.

• Gender : Male (Plug)
• Impedance : 50 Ohms
• Frequency : up-to 12.4 GHz
• VSWR : 1.1+0.01 x f (GHz)
• Connector Body : Brass
• Finish : Gold plated
• Delivered with hardware as per photo
  

DIY High quality connector-  RP-SMA Female Bulkhead Nut Crimp RF connector for RG316 cable, Set, with Hardware

• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo
  

DIY High quality connector- RP-SMA Female Bulkhead Nut Right Angle Crimp RF connector for RG316 cable, Set, with Hardware

• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo
  

RP-SMA Male to TNC Male Adapter

Adapter has RP-SMA (MALE) connector on one end and TNC (male) connector on the other end

Allows interconnection of devices with RP-SMA (MALE) and TNC male interfaces: Antennas, antenna cables and wireless devices.

Use for Coaxial extension, coaxial interface conversion, coax retrofit applications

Gold-plated brass body.

Gold plated center contact for reduced signal loss.

High quality adapter from ISO 9001 facilities.

This antenna cable adapter's range of frequency band compatibility (from 0 to 18GHz) and 50 Ohms impedance matching, makes them suitable and compliant for all the following applications:

Included- 1 x RP-SMA Male to TNC Male Adapter

DIY High quality connector- RPSMA male crimp Right Angle RF connector for RG316 cable, Set, with Hardware

• 
  Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR : 1.1+0.01 x f (GHz)
• Connector Body : Brass
• Finish : Gold plated
• Delivered with hardware as per photo
  

DIY High quality connector- SMA Female 2 Hole Flange Crimp RF connector for RG316 cable, Set, with Hardware

• Gender : Male (Plug)
• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo
  

DIY High quality connector- SMA Female 2 Hole Flange Solder RF connector for RG316 cable, Set, with Hardware

• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo
  

DIY High quality connector- SMA Female Bulkhead Nut Crimp RF connector for RG316 cable, Set, with Hardware

• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo
  

DIY High quality connector- SMA Female Bulkhead Nut Right Angle Crimp RF connector for RG316 cable, Set, with Hardware

• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo
  

DIY High quality connector- SMA Male Crimp Connector for RG-316 cable

• Gender : Male (Plug)
• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR : 1.1+0.01 x f (GHz)
• Connector Body : Brass
• Finish : Gold plated
• Delivered with hardware as per photo
  

DIY High quality connector- SMA male crimp Right Angle RF connector for RG316 cable, Set, with Hardware

• Gender : Male (Plug)
• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR : 1.1+0.01 x f (GHz)
• Connector Body : Brass
• Finish : Gold plated
• Delivered with hardware as per photo
  

SMA Male to TNC Male Adapter

Adapter has SMA (MALE) connector on one end and TNC (male) connector on the other end

Allows interconnection of devices with SMA (MALE) and TNC male interfaces: Antennas, antenna cables and wireless devices.

Use for Coaxial extension, coaxial interface conversion, coax retrofit applications

Gold-plated brass body.

Gold plated center contact for reduced signal loss.

High quality adapter from ISO 9001 facilities.

This antenna cable adapter's range of frequency band compatibility (from 0 to 18GHz) and 50 Ohms impedance matching, makes them suitable and compliant for all the following applications:

Included- 1 x SMA Male to TNC Male Adapter

Extension Cable for Antenna , TNC male on one side- SMA male on other side. Best cable for UAV needs

An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV-UAV system with simplicity & ease.

Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

cable Length +-30cm

The SMA Torque wrench will ensure the correct torque is applied when installing the Coaxial Connectors. This ensures consistent broadband VSWR performance and enhanced mate/de-mate life.

The SMATW wrench is an SMA Torque Wrench which is compatible with SMA connectors.

This tool is set up to 8mm connectors with 1NM torque.

Comes in protective plastic case

B series is an Industrial-Military grade connector, used in real UAV systems. This connector is 16 pins
This connector set( Plug and Socket)comes with factory soldered shielded cable, 30cm long on each side of Plug and Socket side.

Highlights:

• Straight plug feature a unique push-pull self-latching mechanism for safe and secure mating
• Complete protection against vibration, shock or any pull on the cable.
• Keying system («G» key standard)of similar connectors for connector alignment.
• 360° screening for full EMC/EMI shielding.
• High accuracy and interference-free data and signals

To initiate the self-latching system the plug is simply pushed axially into its mating half.
Once firmly latched in place via the internal latches the connection is virtually impossible to break.
No amount of pulling on the cable or any other part of the connector body will release the two parts.

Specifications:

• Max. Matings: 5000
• Contact Dia.: 0.7 mm (0.028")
• Bucket Dia.: 0.6 mm (0.025")
• Max. Solid Conductor: 0.15 mm^2 (AWG 24)
• Max. Stranded Conductor: 0.15 mm^2 (AWG 24)
• R (max): 7.5 mOhm
• Vtest (contact-shell): 1200 V
• Vtest (contact-contact): 850V
• Rated Current: 5.5A (AC/DC)
• Temp range -40 -- 200Deg C
• Humidity <=95% [at 60 deg C / 140 F]
• Vibration 15 g [10 Hz - 2000 Hz]
• Shock resistance 100 g [ 6 ms]
• Salt spray corrosion >144 hr
• IP rating 50
• Shielding 75 dB (10 MHz)

Package includes:

• 1 x Plug 16 pin with factory attached cable 30cm
• 1 x Socket 16 pin with factory attached cable 30cm

B series is an Industrial-Military grade connector, used in real UAV systems. This connector is 3 pin
This connector set( Plug and Socket)comes with factory soldered shielded cable, 30cm long on each side of Plug and Socket side.

Highlights:

• Straight plug feature a unique push-pull self-latching mechanism for safe and secure mating
• Complete protection against vibration, shock or any pull on the cable.
• Keying system («G» key standard)of similar connectors for connector alignment.
• 360° screening for full EMC/EMI shielding.
• High accuracy and interference-free data and signals

To initiate the self-latching system the plug is simply pushed axially into its mating half.
Once firmly latched in place via the internal latches the connection is virtually impossible to break.
No amount of pulling on the cable or any other part of the connector body will release the two parts.

Specifications:

• Max. Matings: 5000
• Contact Dia.: 0.7 mm (0.028")
• Bucket Dia.: 0.6 mm (0.025")
• Max. Solid Conductor: 0.15 mm^2 (AWG 24)
• Max. Stranded Conductor: 0.15 mm^2 (AWG 24)
• R (max): 7.5 mOhm
• Vtest (contact-shell): 1200 V
• Vtest (contact-contact): 850V
• Rated Current: 5.5A (AC/DC)
• Temp range -40 -- 200Deg C
• Humidity <=95% [at 60 deg C / 140 F]
• Vibration 15 g [10 Hz - 2000 Hz]
• Shock resistance 100 g [ 6 ms]
• Salt spray corrosion >144 hr
• IP rating 50
• Shielding 75 dB (10 MHz)

Package includes:

• 1 x Plug 3 pin with factory attached cable 30cm
• 1 x Socket 3 pin with factory attached cable 30cm

B series is an Industrial-Military grade connector, used in real UAV systems. This connector is 5 pin
This connector set( Plug and Socket)comes with factory soldered shielded cable, 30cm long on each side of Plug and Socket side.

Highlights:

• Straight plug feature a unique push-pull self-latching mechanism for safe and secure mating
• Complete protection against vibration, shock or any pull on the cable.
• Keying system («G» key standard)of similar connectors for connector alignment.
• 360° screening for full EMC/EMI shielding.
• High accuracy and interference-free data and signals

To initiate the self-latching system the plug is simply pushed axially into its mating half.
Once firmly latched in place via the internal latches the connection is virtually impossible to break.
No amount of pulling on the cable or any other part of the connector body will release the two parts.

Specifications:

• Max. Matings: 5000
• Contact Dia.: 0.7 mm (0.028")
• Bucket Dia.: 0.6 mm (0.025")
• Max. Solid Conductor: 0.15 mm^2 (AWG 24)
• Max. Stranded Conductor: 0.15 mm^2 (AWG 24)
• R (max): 7.5 mOhm
• Vtest (contact-shell): 1200 V
• Vtest (contact-contact): 850V
• Rated Current: 5.5A (AC/DC)
• Temp range -40 -- 200Deg C
• Humidity <=95% [at 60 deg C / 140 F]
• Vibration 15 g [10 Hz - 2000 Hz]
• Shock resistance 100 g [ 6 ms]
• Salt spray corrosion >144 hr
• IP rating 50
• Shielding 75 dB (10 MHz)

Package includes:

• 1 x Plug 5 pin with factory attached cable 30cm
• 1 x Socket 5 pin with factory attached cable 30cm

DIY High quality connector- Waterproof IP67 SMA Female Bulkhead Nut Crimp RF connector for RG316 cable, Set, with Hardware

• Impedance : 50 Ohms
• Frequency : upto 12.4 GHz
• VSWR: Straight type ≦ 1.3max / R/A type ≦ 1.5max
• Connector Body : Brass
• Finish : Gold plated
• Delivered as 1 set, with hardware as per photo