Monitors & Goggles

The  Battery Plate can be installed on monitor to be independant from power supply

to be fit with Sony FP-970 battery

Eachine EV800 5 Inches 800x480 FPV Goggles 5.8G 40CH Raceband Auto-Searching Build In Battery

Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod
HD high brightness 5inch LCD specially tuned for FPV racing
Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand  
Come with advanced auto-searching function ad show you the working frequency on screen
Built-in 3.7V/2000mAh battery, each full charge revive around 3.5hours working time
Wide range re-charge voltage 5-12V, power banks or 2S/3S batteries can be used as back-up power sour, to prolong the working time
Ergonomic design fit your faces
Super-wide visible angle up to 82 degree
92% transparent lens adopted, no distort, no blur on the adage of screen
Light weight 375g with 3.5hr 2000mAh battery, RTF for any scale racing game
5 inch 800*480px HD high brightness LCD

Screen specification:

• Screen size: 5.0 inch
• Screen resolution: 800*480 (No blur after enlarge by the lens)
• Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
• View Angle: 140/120 degree(Horizontal/Vertical)

Lens specification:

• 3x boost of the video to acquire intense feel-in-there video
• 92% transparent rate no distort of light

Battery specification:

• Built-in 3.7V/2000mAh battery;
• Each battery circle offer around 3.5hr working time
• 5-12V wide recharging voltage range, typical recharging voltage is 5V
• Accepts 5V power banks or 2S(7.4V)/3S(11.1V) battery as back-up power to have long working time

Size & weight:

• Dimension: 180x145x82mm
• Weight: 349g with 3.5hr 2000mAh battery
• Belt: three-ways adjustable belt

Package Included:

• 1 X EV800 FPV VR Goggles (Built-in 3.7V/2000mAh battery)
• 1 X Antenna
• 1 X USB charger cable
• 1 X Battery charger cable
• 1 X AV IN cable
• 1 X User Manual
• 1 X Clean cloth
• 1 X Bag

Frequency Table:

Frequency Band A     5865     5845     5825     5805     5785     5765     5745     5725
Frequency Band B     5733     5752     5771     5790     5809     5828     5847     5866
Frequency Band E     5705     5685     5665     5645     5885     5905     5925     5945
Frequency Band F     5740     5760     5780     5800     5820     5840     5860     5880
Frequency Band R     5658     5695     5732     5769     5806     5843     5880     5917

This Dominator V3 is a new generation of FPV video glasses from FPV pioneer Fat Shark.

Fat Shark Dominator V3
The Fat Shark Dominator V3 is a modular WVGA headset. Suitable for HD video with 16:9 image format.

First Person View
Using FPV video goggles, you can watch in First Person View (FPV) with your drone's camera. The images are captured wirelessly by the FPV video goggles and displayed in real time before your retina. Your drone must have a video transmitter for the wireless transmission of the video images.

FPV drone racing
FPV video goggles are an indispensable part of FPV drone racing. Through these video goggles you can watch from the pilot's seat and fly the racing drone through a course. The video goggles from Fat Shark have been the most popular FPV goggles in the world for years.

Fat Shark
Fat Shark is a pioneer in the field of FPV flying. Fat Shark was founded by Gregory French, a fanatic FPV flyer himself. The brand is characterized by continuous innovation and listening carefully to the FPV community. Fat Shark has been the leading market leader in the field of FPV video glasses for years.

DominatorV3
This Fat Shark Dominator V3 video glasses is suitable for an HDMI connection with 720p support through a robust mini-HDMI port and 16:9 format WVGA.

DVR
The improved Digital Video Recorder (DVR) allows you to easily switch between NTSC and PAL formats as well as the option to back up files in case the power unexpectedly turns off during recording.

Reception signal
The Dominator V3 supports 1.3Ghz, 2.4Ghz and 5.8Ghz band receivers. The Fat Shark Dominator V3 captures both the audio and video signal.

Audio
You can connect headphones via the 3.5 mm audio output on the video glasses so that you can hear the sound from the drone.

Audio & Video output
Using the supplied AV cable, you can also display the image and sound from the video glasses on an external source, such as a monitor, TV or recorder.

Head Tracking
The Fat Shark Dominator V3 FPV video glasses are suitable for the Trinity Head Tracker.

Compatible
These Fat Shark video glasses are compatible with almost all video transmitters and products from brands such as ImmersionRC, Team Blacksheep, DJI, Flysight, Walkera and many others.

Range
The distance that the drone can be away from the video goggles is determined by the video transmitter and not by the video goggles. The video goggles only receive the transmitted signal. Therefore, consult the product information of the video transmitter of your drone to determine the range of the video transmitter.

Includes

• 3m AV cable
• 1800 mAh battery with LED indicator
• Zipper carry case
• DC DIY cable
• Manual
• Goggles v3 dominator
  

Screen: 2" TFT LCD display.
Resolution: 960*240
Brightness: 450 cd/m2
Contrast: 500:1
Antenna: included
Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional.
Battery: 500mA lithium battery, charging time 90m usage time about 100m.
Power loss: 320 mA 3.7V (Max)
Working enviroment: -10~+65 C Degree
Antenna: Built-in 3dbi brass 5.8G antenna
Power button: boot or shutdown
CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678
Battery: Built-in 500mA lithium battery
Charge indicator: red light when charging, red light off when the battery is fully charged
Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on.
Charging port: micro USB + 5V (use only rechargeable)
Charging current: 500mA
Charging time about 90 minutes
Time about 100 minutes

Package included:
1 X Watch
1 X USB Cable

1 X User Manual

FPV Googles Eachine VR009 5.8G 40CH 800x480 5 Inch Video Glasses Headset

Screen: 5 Inch
Resolution: TFT 800x480
Ratio: 16:9
Audio Output: 3.5 3 Class stereo
Audio Output: 3.5 4 Class Standard Output Port
Adjustment: Maual Search/AUTO Search/Lighting/Contrast/Chroma
Video Format: NTSC/PAL Auto
Receiver: Build in 40CH High Sensitive Receiver Module
Connector:  Earphone Jack: 3.5mm,3 class
                      ANIN Connector: 3.5mm 4 Class
                      AVOUT Connector: 3.5mm 4 Class
                      DCIN:  Standard T plug, with extend cable
Weight: 258g
Working Temp.: -20℃-80℃
Size: 168x158x105mm
Power: 7-17V(2S-4S)
Current: 300mAh

Frequency:

CH1   5.645G CH2   5.658G CH3   5.665G  CH4   5.685G  CH5   5.695G
CH6   5.705G CH7   5.725G CH8   5.732G  CH9   5.733G  CH10 5.740G
CH11 5.745G CH12 5.752G CH13 5.765G CH14 5.769G CH15 5.771G
CH16 5.780G CH17 5.785G CH18 5.790G CH19 5.800G CH20 5.805G
CH21 5.806G CH22 5.809G CH23 5.820G CH24 5.825G CH26 5.828G
CH27 5.840G CH28 5.843G CH29 5.845G CH30 5.847G CH31 5.860G
CH32 5.865G CH33 5.866G CH34 5.880G CH35 5.880G CH36 5.885G
CH37 5.905G CH38 5.917G CH39 5.925G CH40 5.945G

Menu:

1: Manual search, between 5.645~5.945( total 40 channels), press button+ or – to choose. Long press +
or – for fast change.
2: Automatic search, very high speed to match the strongest 5.8G channel.
3:  Brightness, press button+ or – to increase or reduce the brightness. Long press + or – for fast change.
4: Contrast, press button+ or – to increase or reduce. Long press + or – for fast change.
5: Color saturability, press button+ or – to increase or reduce. Long press + or – for fast change.

Jacks Function:

1: External video input(4 pins), System will automatic get the input signal and exchange the working
mode.
2: Video output(4 pins). Share the most primitive and authentic senses experience.
3: Audio output. (3 pins)

Package Included:

1 x Goggles
1 x Headbands
2 x Eye Patch Spongia
1 x Power Extend Cable
1 x Antenna
1 x Earphone Extend Cable

 

Want to be able to mount a small display onto your radio transmitter ? , now you can with our Carbon Fiber FPV monitor mount

• 7-8 inch FPV Monitor Mount to Futaba/JR/other Transmitters
• You can mount your FPV monitor to your transmitter using this monitor mount.
• Suitable for 7-8 inch monitors:
• Compatible transmitter type: Transmitters with metal bar type handle. (like Futaba 9C, 10C, JR 9-ch, etc. )

* This monitor mount only suits for transmitters with thin metal bar type handle as shown on below picture.

With Auto Search Function! Support Fatshark, and other Video Transmitters, delivered with Charger, and Sun shade.

Features:

• Built in Dual Receiver Automatically for the best reception Automatic Antenna Switching
• Dual buffered AV Output
• Can receive 2 different channels at the same time
• Not affected by 2.4G videos
• AV receiver with diversity inputs
• Small, light weight, durable
• 4 bands and total 32 channels
• Built-in battery, easy to carry and outdoor use
• A key to automatic signal search, simple operation
• Work status OSD display: Always be aware of the device working condition

Specification:

• Built-in 5.8Ghz dual diversity receiver automatically for the best receiption
• Built-in 2Ch 5.8Ghz AV output and I CH AV input
• Built-in high performance 7.4V 2450mAh Li-Po
• Work Status OSD display: RSSI indication; Battery indicator; Channel indicaton
• A key to automatic signal search
• Support Chinese and English Menu
• Size: 180mm X 120mm X 50mm (Note: Sunshield height: 28m)
• Working Voltage: DC7-16V
• Power Consumption: max 650mA@12V
• Battery Charging Current: 850mA@12V (Max)
• Working Temperature: 10C ~ 65C

 Display Parameter:

• Screen Size: 7"
• Screen Type: TFT LCD Screen/ Long life, LED backlight
• Resolution: 800 X 480
• Brightness: 450cd/m2
• View Angle: 140/120 degree

 Package Include:

• 7" LCD Screen Receiver Monitor with built in Rechargeable Battery X 1
• 5.8G Antenna X 2
• AV Cable X 2
• Charging Cable X 1
• Charger 220v
• Sun shade

RJX Diversity Receiver Module ( Special for Fatshark Goggles SMA- Female)

Feature:

• RX5808 Pro Diversity Open Source 5.8G 40CH Integrated Receiver with OLED
• Suitable for Fatshark series Goggles
• Antenna Connector: SMA  Frequency: 5.8G  Channel: 40CH
• With OLED display ，Auto scan，Channel switch in 25ms
• Plug and Play
• 2S（7.4V） 600mA

Package Included:
1 x Diversity Receiver

Frequency:
Jumper:1-1 IRC/FS : 5740,5760,5780,5800,5820,5840,5860,5880
Jumper:0-0 Race   : 5658,5695,5732,5769,5806,5843,5880,5917
Jumper:0-1 Band A : 5865,5845,5825,5805,5785,5765,5745,5725
Jumper:1-0 Band E : 5705,5685,5665,5645,5885,5905,5925,5945

•  

Charger for Sony FP-970  Type batteries , 220v

High Capacity Long Life lithium-Ion cells with short-circuit, over voltage and overheating protection.
6400 mah

1800 mAh Headset Battery With LED Power Indicator

The 1800mAh pack has improved molded shape to securely fit in head strap pocket.
   
Battery has already integrated balance circuit inside, so no need to connect black/red discharge lead for charging (only for power the fan equipped face plate), just simply use its DC barrel connector and included banana adapter to do lipo charge off standard RC type chargers at maximum 1C (7.4V, 1800mAh).

Specifications:

• Voltage: 7.4V
• Capacity: 1800mAh (13.3Wh)
• Dimensions: 63x19x31mm
• Weight:100g
• Max Charge Rate: 1C (1800mAh)

Adjustable CNC Aluminum Alloy FPV Monitor Bracket Holder ALL RADIOS

Features:

• Aluminum alloy material
• Light weight, High strength
• Suitable for 7inch or 8inch monitor
• Suitable for hook hole diameter 4.9mm-7.5mm.
• Compatible with all monitor with 6mm screw hole
• Viewing angle adjustable

Specifications:

• Material: Aluminium
• Color: orange,silver
• Size: 83 x 27 x 26mm
• Net weight: 22g

Transmitter Carbon fiber tray for DJI MAVIC PRO.

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick carbon composite material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI MAVIC PRO.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 250 x 165 x 130 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)

 

 

FPV Carbon tray Tablet holder adaptor for carbon trays

Stable FPV extension for transmitter trays in modern carbon design.
The FPV expansion is well suited for the video flight with Coptern, airplanes or helicopters.

For rear mounting of the monitor.
for foot mounting or side mounting requires one additional parts.

Compatible with our tablet holder.

Material: Carbon black GF3

• Weight about 200 g
• FPV without transmitter tray, without transmitter, without monitor, without accessories & without rubber hand rest pads.

 

FrSky Taranis X9D in Black GFK fiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 305 x 160 x 145 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)

 

 

Spektrum NX6, NX8 & NX10 in black GFK fiber Transmitter tray

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter tray is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

Dimensions:
Width: 295 mm
Depth without transmitter: 150 mm
Height with standard transmitter stand: 147 mm
Height with foldable transmitter panel bracket: 177 mm / folded: 122 mm

Spektrum NX6, NX8 & NX10 in CARBON fiber Transmitter tray

The Tray is made of high-quality, CARBON fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter tray is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

Dimensions:
Width: 295 mm
Depth without transmitter: 150 mm
Height with standard transmitter stand: 147 mm
Height with foldable transmitter panel bracket: 177 mm / folded: 122 mm

Stainless steel thumbscrews for faster assembly tablet holder adaptor for carbon trays

Stainless steel thumbscrews for faster assembly and disassembly of the FPV extension on the transmitter desk ..
Fits the transmitter consoles with FPV extension.

Kit contains:

• 4 knurled screws and 4 knurled nuts, without FPV extension, without transmitter desk, without transmitter and without monitor

Tattu 2500mAh 2S 7.4V replacement lipo battery for Fatshark Goggles

Tattu 2500mAh 2S1P Fatshark Goggles Battery has high quality, the weigh only about 106g, it can make your Goggles for a long time, 2500mAh battery is a great Fatshark Goggles replacement lipo battery.

Specifications:

• Capacity: 2500mAh
• Voltage: 7.4V
• Plug: DC3.5mm
• Size: 72*38.1*19mm
• Weight: 106g
• Tattu 2500mAh 7.4V 2S1P Fatshark Goggles Lipo Battery

 

Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to USB-C android devices when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and other side to android device.
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

Connector: USB-C to USB-C (Android devices and others)
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom

OTG cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device.

Cable avaliable in following configuration: choose your model

• Micro USB to USB-C
• Micro USB to Apple (Lighning)
• Micro USB to Micro USB

For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your  mount.

You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:

•     DJI Mavic Pro
•     DJI Mavic Pro Platinum
•     DJI Phantom 3
•     DJI Phantom 4 / Pro / Pro V2
•     Inspire 1
•     Inspire 2
•     Matrice 210
•     Matrice 600
•     Mini
•     Spark

Also Other models which fit the connector and OTG

Cable length: 35cm (coiled), total length max 60cm

Set of 1 cable

Thor cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device.

Cable avaliable in following configuration: choose your model

• USB-C to USB-C
• USB-C to Apple (Lighning)
• USB-C to Micro USB( not coiled- straight)

For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your  mount.

You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:

• DJI Air 2
• DJI Mavic Mini
• Mavic Pro
• Phantom series
• Inspire

Other models which fit the connector

Cable length: 35cm (coiled), total length max 60cm

Set of 1 cable

Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to iPhone / iPad when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and the lighning end is used with iPhone /Tablet, it support IOS 7,8,9,10, fit for iPhone X / 8 / 7 / 7/ 6 / 5 / SE, iPad / iPad Air / iPad Mini and etc
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

Connector: Micro USB to Lightning ( for iPhone / iPad )
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom