Lipo Accessories

This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually . With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

Special Light led seen from long distance.

This product designed to work with ALL lipos 4s 14.8n

Working status as following:

- 14.8 v+ Blue light shines
- 14.8~13.6v Blue light flashs
- 13.6~13.2v, Red light shines
- Below 13.2v, Red light flashing
  From this time, you have around 30 seconds to land ( More then enough time )

This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

Special Light led and sound will be heard / seen from long distance.

This product designed to work with ALL lipos 6S- 22.2V

Working status as following:

- 22.2 v + Blue light shines
- 22.2~20.4 v Blue light flash
- 20.4~19.8 v, Red light shines
- Below 19.8 v, Red light flashing & Beep
  From this time, you have around 30 seconds to land ( More then enough time )

This is the best Insurance to Fly Safe and to keep your Lipo packs goinf Under charge and inflate..

Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

Special Light led and sound will be heard / seen from long distance.

This product designed to work with ALL lipos 2S - 7.4v

Working status as following:

- 7.4 v+ Blue light shines
- 7.4~6.8v Blue light flashs
- 6.8~6.6v, Red light shines
- Below 6.6v, Red light flashing & Beep
   From this time, you have around 30 seconds to land ( More then enough time )

  Appliable for: RC Quadcopter, helicopter, multicopter,car,boat and airplane,1S-8S / Lipo / Li-ion / Li Mn / Li-Fe battery.

• Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe.
• Voltage detection pricision: 0.01V.
• Unit voltage display range: 0.5V-4.5V.
• Total voltage display range: 0.5V-36V.
• 1S test mode voltage range: 3.7v-30v.
• Low voltage alarm mode for 2-8S.
• Alarm set value range: OFF-2.7V-3.8V.
• When the voltage is below the set value,it will buzzer with red LED light,pre-set value 3.3V.
• Push key which can change the voltage settings and save.
• Size: 3.9cm x 2.4cm x 0.9cm.

Features:

-This product is using for detecting 1S-8S lithium battery
-Detect the voltage of each battery core automatically, support reverse connection protection.
-To know the working state of your battery anytime, protect the battery from overcharge and over discharge.
-The red LED will flash,the buzzer will beeping when the voltage is below the set point.
-The factory default setting is 3.3V, press the button to change the voltage setting, and it will save your current setting automatically.

7.4V Li-po Battery Indicator Display Board Energy Storage Monitor 2S

• High reliability, low cost and compact size.
• Flash LED for low charge warning.
• Optional memory to recall the amount of electricity.
• Special design to monitor the battery power level while charging or discharging.
• Provides instant battery status to enable efficient charge management.
• 4-segment LED bar graph display.
• Easy to install and use.

Battery Copper bridge bars, to solder packs together.

Made from Copper , excellent resistance to Vibrations, and Zero Loss of Energy.

Pack of 10

Introducing Charge Marker, the manual battery indicator. Charge Marker is a quick, simple, visual gadget that permanently adheres to your rechargeable battery to help you keep track of its charge status – no connections, no fuss!

Operation for Use:
Once your battery is charged simply slide the manual slider to green to indicate that the battery is ready to use. When you have discharged your battery slide the slider to red to indicate that it needs recharging. It’s really that simple!

Installation:

1. Choose an appropriate location for the Charge Marker on the battery.*
2. Make sure that the selected battery surface is relatively flat (it is not recommended to mount on batteries that only have cylindrical form).
3. Ensure that the selected surface is clean i.e. free from dust, dirt and oils.
4. Remove the adhesive backing and apply to battery, pressing down firmly and leave for one hour before use.

Specifications:

• Height:  2.75mm
• Width:  9.2mm
• Length:  27.5mm
• Mass:  0.35 grams
  
  Each pack contains 4 pcs.

*Note: Charge Marker has a height of 2.75mm and should be located in an area that will not interfere with surrounding geometry when the battery is installed.

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

Size 23cm x 30cm - fits for 2 packs 6s 5000, however we recommend to use each pack with each bag.

The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

Instructions to use:

Ensure that charger rate is properly set and polarity is correct

1. Attach charging leads to battery
2. Place battery in LiPo Safe towards the bottom
3. Place LiPo Safe on non-flammable surface
4. Route charge leads through vent at the top seam of the LiPo Safe
5. Close top flap of LiPo Safe and press hook and loop closure fully closed
6. Charge battery using proper charging practices
7. Always practice extreme caution when charging and never leave a charging battery unattended

Please check the Video showing the use of Lipo Safe

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

This product is made of the high-grade material with strong tension, which makes it more durable and eco-friendly. The safest way to charge and store your lipo batteries and protect your workshop, family and home from the hazard of lipo

Fireproof & Explosion-proof Material
This battery safe bag is made of fire retardant fiberglass woven fabric, which can effectively isolate the battery from contact with the air when the battery is accidentally burned or exploded, to achieve the purpose of extinguishing fire.

Large Capacity Bag
With a large capacity of approx. 260x130x150 mm, this lipo safe bag is ideal for holding model airplane 6S 30000 and bigger... battery or Large UAV battery, car model or airplane battery.

Provide Protection For Battery
Battery safe storage bag is a convenient way of safe-guarding your batteries during charging, transit, and storage.

Sturdy Handle & Double Zippers
It features a reinforced handle to withstand wear and tear, loads up to 8 kg. Double zippers ensure the bag is tightly closed and easy to open.

With Charging Hole
The lipo battery storage safe pouch is designed with a charging hole for battery charging to avoid the risk of explosion.

Color- Black

Safety First ! We still recommending never leave the place while the battery in charge

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

Gens ace Lipo Safety Box - Dimensions: 185x60x75mm, Fit to packs up to 6s 5000.

This is the best Insurance to Fly Safe and to keep your Lipo packs going Under charge and Model loss.

Lithium Battery monitor showing your battery status in use, When the voltage of battery will drop TO SAFE LEVEL, the monitor will start to show it Visually and also audible with High DB Piezo buzzer. With the help of this monitor you can detect end of Flight, or any problems in your heli or airplane, and will help you to land safe.

Special Light led and sound will be heard / seen from long distance.

This product designed to work with ALL lipos 3S- 8S

This clip is designed to proctect the JST-XH type balance connector of your battery from damages, and for easy and quick connection and disconnection. JST-XH connector is the most popular balance lead in the RC field.

Every pack contains five clips of same size (not as on the photos)

Features:

• Made of storng, non-toxic polypropylene (PP).
• Precision casting.
• Grained and curved surfaces for easy handling.
• Light weight:  3S-1.4g, 4S-1.6g, 6S-2g.
• Compatible with JST-XH balance connectors

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

Dimensions:  215 X 50 X 170MM

Lipo packs must not be discharged below approximately 3.0 Volts per cell. Even a single deep discharge may permanently damage your pack. The tiny Lipo Voltage Guard operates in parallel with your Electric Speed Controller. It will flash a LED when your pack drops below a preprogrammed voltage threshold. The factory setting is for 3 cells , 3.0V per cell, with 'timed minimum hold'. The LiPo Voltage Guard may be easily reprogrammed to suit your own requirements with your transmitter/ receiver the supplied programming lead and your flight pack or power supply capable of any voltage between 5 and 45 volts.

Specifications:

Microprocessor controlled, auto calibrating, 10-bit A/D converter with digital signal processing.

Operating voltage: 5V - 45V
Minimum threshold: 5V (2 cells, 2.5V / cell)
Maximum threshold: 34V (10 cells, 3.4V / cell)
Precision: 1% or better
Current draw: 35mA during alarm state, <10mA otherwise
Weight: 4g
Size: 28mm x 20mm x10mm

Matek  3in1 device with LiPo Battery monitor, Discovery buzzer & Signal loss alarm functions. Build in ultra-high brightness LED & twin loud buzzers

Specifications:

1. Working voltage: 5.2~26V DC, 2~6Cells LiPo
2. Standby current less than 10mA
3. Working current, Max 120mA (blinking & beeping)
4. Voltage threshold setting: 3.4~3.7V/cell (Red LED)
5. Twin loud buzzers, 85db each
6. Ultrahigh Brightness LED, 20lm, 0.2w, Blue
7. Size: 20x30x6mm,
8. Weight: 7g

How to use

1. Battery monitor function (F1)

It can monitor 2~6S LiPo voltage status & notify you once the cells reach the defined voltage.
The voltage threshold of alarm & flash can be customized between 3.4V~3.7V/Cell.
1.1 If the LiPo voltage is in the range of following, The BM3in1 will detect the cell numbers automatically when the LiPo is connected.

• 7.4～8.6V: 2cells LiPo
• 11.1~12.9V: 3cells LiPo
• 14.8~17.2V: 4cells LiPo
• 18.5~21.5V: 5cells LiPo
• 22.2~25.8V: 6cells LiPo

The BM3in1 will alarm “Be” & the voltage threshold red LED will be shown.

Hold the button 3 seconds to enter the setting of the voltage threshold.
Press button to set the alarm threshold between 3.4~3.7V/Cell(red LED) .
The value will be saved & exit if no action within 10 seconds.
During the using of LiPo, BM3in1 will detect the voltage always.
If the total voltage is below “threshold * cells”, the alarm & blink will be triggered with “Be..Be..Be……”
If the total voltage rise again, the alarm & blink will be suspended.

 If the LiPo voltage is out of the aforesaid range. The BM3in1 will alarm “Be..Be..Be” & 4 red LEDs light. Pls check if the battery total voltage is below 3.7V*cells

2. Discovery buzzer function (F2)

It is easy to use the function, Just plug it in one Aux channel(e.g. Gear).
Move the toggle switch to one side or another side, the BM3in1 will alarm “BeBeBeBeBe” & blue LED blink.

3. Signal loss alarm function (F3)

It can warn you if you turn off the transmitter first by mistake, if you have trouble finding a model in the long grass…

Turn on the transmitter first. Hook BM3in1 to the receiver THRO channel, then plug battery into model. It will detect the loss of TX signal, and emit a loud alarm “BeBe…BeBe…BeBe…” & the blue LED blink.

RX power on, the alarm & blink will be triggered as following

Turn off the transmitter first. and keep one minute.
The radio power on, but no action of stick or no signal change within one minute.

Mikado Battery ID tags

This is a multifunctional battery protection board designed for racing drones. It's designed to sit over your LiPo Battery to provide it with a protective shell. In addition, it has functions such as voltage monitoring, low voltage alarm, LED navigation lights, and an active out of control alarm.

Battery voltage monitor: Display the battery real-time total voltage through a digital display.

Low voltage alarm: The voltage alarm can be set so that when a cell reaches the preset alarm voltage (3.3-3.7V), the buzzer starts to alarm and the LED lights start to flash.

Multicolour LED navigation lights: The board incorporates LEDs on top and at the rear with seven different colour options to select from.

Active out of control alarm function: When the battery board is powered on, it starts counting and the buzzer will start to beep in 6 minutes - a useful feature to help you find your quad if you lose it in long grass.

Features:

Plug and Play - Powered by a 4S or 3S LiPo Battery Balance Plug
Multicolour LED Lights
Battery Voltage Monitor
Low Voltage Alarm
6 Minute Buzzer
Please Note: The device is powered by a 4S or 3S LiPo battery's balance plug. Default factory setting is for a 4S LiPo battery. If a 3S LiPo battery is used, the positive wire should be soldered to the pad marked as “3S+” on PCB.

Prolux Volt Saver Security Alarm With LED Indicator PX1418 : LED Battery Checker for NIMH 4.8~6V, LiPo 7.4~11.V.

Features

• Used on receiver's battery-check
• Indicates 4~5C Ni-Cd/MH & 2~3S LiPo battery
• Shows battery status in three different colors of LED
• Plugs into any open receiver channel

RC Drone Finder Alarm 5V 110dB Super Loud Buzzer Tracker with LED Buzzer Alarm Build in Battery for FPV Drone Quadcopter
The drone buzzer has two modes of operation:

1. It is compatible with the functions of the traditional active buzzer and synchronized with the flight control.

2. When the flight control is normally connected, if the main battery in the flight is powered off, it can still automatically emit 110 dB of drip sound after 30 seconds of power failure, and the LED will emit white light, and the sound is louder than the general buzzer. Much bigger.

How to turn off the buzzer:

Press and hold the release button for more than 2 seconds, the  Finder turns off the sound.

The  Finder is compatible with all BF and CF flight controls.

Just connect to the buzzer interface of the flight controller and it will work. When the flight control wiring is correct, the multi-rotor aircraft is powered on, and the flight control power supply will automatically charge the JHE42B Finder (the red LED will light to indicate that charging is in progress).

Size: 23*17*17MM

Weight:7.4 g

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

This is a long version of the Safe product, measuring internal dimensions of 340x70x65mm, fits long Stick Lipos 12s and even some 14S packs- verify the size of your lipo to be sure it fits inside the bag.

The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

Instructions to use:

Ensure that charger rate is properly set and polarity is correct

1. Attach charging leads to battery
2. Place battery in LiPo Safe towards the bottom
3. Place LiPo Safe on non-flammable surface
4. Route charge leads through vent at the top seam of the LiPo Safe
5. Close top flap of LiPo Safe and press hook and loop closure fully closed
6. Charge battery using proper charging practices
7. Always practice extreme caution when charging and never leave a charging battery unattended

Please check the Video showing the use of Lipo Safe

Less then 4 grams of weight, and this small tool is your insurance for battery condition on heli or other models.
Selectable switch to choose your battery pack 4.8 or 6v.
Very Bright leds to insure perfect visibility.Very low power consumption, not to draw too much current.
Flat and very easy to mount.
Just place it near your canopy screen, or on the fuselage, Boom, Under wing and you can be sure you are ready to go.

Yuneec 3-Cell / 3S 11.1V LiPo Balance Connector Charge Lead / Extension

CNC XT60 Aluminum housing holder

Mikado VBar Control Battery ID Sensor

Benefits at a glance:

• Automatic detection of flight pack batteries in a model.
• Battery logbook stored in the radio automatically.
• Simplified battery management.

Required accessories:
VBar Control radio 04841 or set 04842, 04843 with VBar Control RX-Satellite and VBar with Spektrum-Satellite-Connectors (Telemetry-Bus).
Current/Voltage/Capacity Sensor 04890.
Battery ID Tags 04908 (10-pcs. each; 5 pcs. included with each sensor).

Consumer benefits:
Less risk of damaging batteries by deep discharge when using flight packs with different capacities or of different age.
Automatically creates and stores logbooks in VBar Control for all flight packs that have already been entered,
which can be analyzed on a computer later on.
Automatic selection of known batteries in VBar Control, independently from the selected model: plug & fly.

RC CellMeter-8 1-8S Battery Capacity Voltage Checker Meter LiPo Li-lon NiMH

This RC CellMeter-8 digital battery capacity checker is able to be used for LiPo LiFe Li-ion NiMH Nicd batteries.

Features:

• Support Battery Type:LiPo, LiFe, Li-ion, NiCd, NiMH
• Servo Test Mode:Manual adjustment, Auto Matic, Neutral
• Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz
• Display Mode: Battery cell voltages, Total Voltages, Lowest cell voltage, Highest cell voltage, Voltage gap between highest cell voltage and Lowest cell voltage, Remaining battery capacity(%).
• Discharge, Fast discharge

Specifications:

• Item size: 8.5 * 5 * 1.6cm
• Item Weight: 40g
• Package size: 10.5 * 10 * 2cm
• Package Weight: 55g

Package including:

• Digital batteryt checker x1

XT90 Plug Connector Holder

RC lost Airplane/helicopter/drone  finder Alarm.

• Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.
• Turn on your TX. and you will hear 2 x beep sound.
• Do not move any of the control stick on the TX or simply turn off the the TX. You will hear a continuous beep sound after 1 minute. It will stop once u turn on your TX or move the control stick.
• If you ignore the continuous beep sound for around 2minutes, the beep sound will change the a louder V sound.
• You need to disconnect the alarm from the receiver in order to switch of the alarm.

Specifications:

• RC Radio Control  Lost Finder Tracker
• Suitable Controller: All PPM/FM, PCM/FM, AM Tx/Rx
• Loud >85dB alarm gets your attention
• Two alarm tones pattern
• Works with AM/FM PPM or FM/PCM R/C systems
• Plugs into any standard servo channel
• Operating Voltage(v) : 4-6v
• Current Drain(mA) : 1-35
• Can be heard in 50 meter distance

How to set up

1. 1. Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord
2. 2. Turn on your transmitter
3. 3. Turn on your receiver then you will hear two beep sound
4. 4. To test if it is functioning:
5. Do not move any of the control stick on the transmitter for 1 min. or simply turn it off
6. You will hear a continuous beep sound after 1 minute
7. If you ignore the continuous beep sound for around 2 minutes, the beep sound will change to a louder V sound
8. It will stop once you move the control stick or power off the receiver
9. 5. If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 min for the alarm sound
10. 6. By the tracking sound, you will be able to locate your RC plane / Helicopter
11. 7. To stop the alarm : Move the control stick or Power off the receiver
12. Can be connected to any kinds of servo
13. Should be connected to the servo that runs when flying