LED & Lights

Add colorful uniqueness to your aircraft with these 3 element LED stick lights. These sticks can be used on just about anything that flies.

Specifications:

• Weight : 0.8g
• Dimensions: 2.5x9x30mm
• Voltage: 3S

 

High luminance FPV racing LED 12V- Choice of Colors : (Blue, Green, Red)

Very powerful Led For FPV multi-copters use,can be also used on any product.You will be seen with this led.
Comes with Self Adhesive M3 material, for easy placement

• Input Voltage: 12V
• Power Consumption: 3W
• Lifespan : 50000 Hours
• Size:16mm*26mm
• Wires soldered for easy connection

High luminance FPV racing LED 12V- Choice of Colors : (Yellow, Green, Red)

Very powerful Led For FPV multi-copters use,can be also used on any product.You will be seen with this led.
Comes with Self Adhesive M3 material, for easy placement

• Input Voltage: 12V
• Power Consumption: 3W
• Lifespan : 50000 Hours
• Size:20mm*60mm
• Wires soldered for easy connection

High luminance  racing LED 12V 14x180mm Color (Yellow, Green, Red) fits Multicopter( Not fit the FPV ), Planes, Helis, and more.

• Super Bright Blue 6W LED Panel
• Material: Aluminum Alloy Frame with Led
• Working Current: 12V DC
• Feature: Waterproof, Anti-dust, anti-collision, safe and durable, easy to install.
• Size: 14mm x 180mm
• Easy to install, 3M tape adhesive on back and wire included

KDS Kylin FPV 250 Race LED set 4 pcs KF-250-22

Matek WS2812B LED Board With 5V Buzzer For Naze 32 Skyline 32 Flight Controller

When used Naze32, WS2812B LED can show the flight control lock / unlock, about ailerons, brakes, throttle, alarm and other status.
On board 5V active buzzer, after connecting flight control, you can use a remote control switch to trigger it easier to find the plane.

Description:

• 5050 Package RGB full color highlighting WS2812B lamp beads * 6
• 5V active buzzer
• Voltage: 5V (4 ~ 7V)
• Size: 50 * 10mm, 3g
• Installation pitch 30.5mm, aperture 3mm

Platform: Arduino, Naze32, Skyline32, SPRacingF3 flight control (need to brush CleanFlight)
When used Naze32, WS2812B LED can show the flight control lock / unlock, about ailerons, brakes, throttle, alarm and other status.
On board 5V active buzzer, after connecting flight control, you can use a remote control switch to trigger it easier to find the plane.

This is a micro switch, to be glued or soldered on small FPV racer. you can use it as a switch for Leds.

Very small size, however not recommended to be used as main switch.

Check drawing for details

General size 6.6x2.7mm, thick is 1mm.  weight 0.1gr.

Multicopter led Light 50mm, available in yellow
, size is 50mm long, 12m wide.
This light has 4 strong SMD led chips, gives you perfect visibility in day time, or during the race. Operating voltage- 5V DC

This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

Light Color: Red
Case : Silicone red
2 modes: Flash, Constant light
Light visible till 300 Meters
Power supply: 2x CR2032 per light (incl.)
Weight: ±20g/light

RGB LED Board  comes with three RGB LEDS. Seven colors are selectable by different combination of dip switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

Specifications:

• INPUT: 10~13V DC
• Size: 47x10mm
•      Weight: 2g
•      Packing:  LED BOARD 1pc, Double side sticker

Notes:

•     Easy to Solder
•     Be aware of the positive and negative poles, as well as the insulation;
•     Switch the related codes to ON, seven colors are selectable;
•     The input is in a range of 10~13V DC, can be powered by 3S Lipo or 12V BEC.

Selectable Colors:

    B ON =Blue, 0.35W, 0.03A
    R ON =Red, 0.35W, 0.03A
    G ON =Green, 0.35W, 0.03A
    B+R =Megenta, 0.70W, 0.06A
    B+G =Cyan, 0.70W, 0.06A
    R+G =Yellow, 0.70W, 0.06A
    B+R+G =White, 1.05W, 0.09A

RGB LED Board  comes with three RGB LEDS. Seven colors are selectable by different combination of dip switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

Specifications:

•      INPUT: 14~17V DC
•      Size: 47x10mm
•      Weight: 2g
•      Packing:  LED BOARD 1pc, Double side sticker

Notes:

•     Easy to Solder
•     Be aware of the positive and negative poles, as well as the insulation;
•     Switch the related codes to ON, seven colors are selectable;
•     The input is in a range of 10~13V DC, can be powered by 3S Lipo or 12V BEC.

Selectable Colors:

    B ON =Blue, 0.35W, 0.03A
    R ON =Red, 0.35W, 0.03A
    G ON =Green, 0.35W, 0.03A
    B+R =Megenta, 0.70W, 0.06A
    B+G =Cyan, 0.70W, 0.06A
    R+G =Yellow, 0.70W, 0.06A
    B+R+G =White, 1.05W, 0.09A

Matek Tail Light WS2812B with Loud Buzzer Dual Modes for FPV Racer Multicopters

Designed as an H-Type tail light with 8xWS2812B LEDs and Loud Buzzer.
When used, the WS2812B LEDs can show the flight control lock / unlock, about ailerons, brakes, throttle, alarm and other status.

This product provides dual control modes, it can be controlled either by flight controlling firmwares (Cleanflight, Betaflight,etc.) or by Transmiter.

Specification:

• Brand name: Matek
• Item name: LED Tail light with Buzzer board
• Dual modes: FC control & TX control
• TX mode: LED 7 colors (White, Red, Green, Blue, Yellow, Magenta, Cyan) LED 5 status (Constant light, Slow blink, Fast blink, Voilent blink)
• Buzzer: Lost Plane Finder
• FC mode: support Naze32, SPRacingF3, etc. with CleanFlight or Betaflight firmware
• Input voltage range: 4.5~5.2V DC
• Power of TX mode (5V IN ): 1W/0.2A~2W/0.4A Size & mounting: Pls check the Layout
• Weight: 5g

Package Includes:
1 X LED Tail light with Buzzer board

 

 

24 Bright white circle LED 1.5W DC12V. 140-160LM (1pc)

Specification:
 

• Beam angle: 120°
• Power consumption： 1.7W
• Voltage： DC 12V
• Lumens: 140-160LM
• SMD : 2835 (24 LED)
• Size: 30 (dia) x 40mm (total lenght)

Material:
 

• Composite

5 Bright white LED 5W DC12V. 140-160LM (1pc)

Specification:

• Beam angle: 360°
• Power consumption： 1.5W
• Voltage： DC12V
• Lumens: 140-160LM
• Size: 25x13mm

Material:

• Aluminum cage

5 Bright white LED 7.5W DC12V. 180-200LM (1pc)

Specification:

• Beam angle: 360°
• Power consumption： 2.2W
• Voltage： DC12V
• Lumens: 180-200LM
• Size: 35x19mm

Material:

• Aluminum cage

Bright white circle LED 1W DC12V. 70-80LM (1pc)

Specification:

• Beam angle: 180°
• Power consumption： 1W
• Voltage： DC12V
• Lumens: 70-80LM
• Size: 25 (dia) x 15 (H) x 15mm (total lenght)

Material:

• Aluminum cooler

Bright white LED 1.5W DC 12V. 6000k (1pc)

Specification:

• Beam angle: 80°
• Power consumption: 0.7W
• Voltage：DC 12V
• Lumens: 55-65LM
• Size: 25x11mm

Material:

• Aluminum cage
  

This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

Very low Draw of current, Strong light

• Light Color: Blue
• 30mm diameter- easy placed, and also can be put in certain motor mounts.
• Light visible till 300 Meters
• Power supply: 11-12v, Balancer 3s connector.
• Weight: < 5 gr

This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

Very low Draw of current, Strong light
 

• Light Color: Cool White
• 30mm diameter- easy placed, and also can be put in certain motor mounts.
• Light visible till 300 Meters
• Power supply: 11-12v, Balancer 3s connector.
• Weight: < 5 gr

eTURBINE Quadcopter Rear LED Ice Blue & controller

140mm long, however can be used for Any machine.

Controller allows 8 different modes of Light, the LED is in Ice Blue color. Providing Excellent visibility at any time of the day.

Great for making your own Night flight lighted signs. Strip is 3x20cm in size.
Kit comes with 6-12 volt driver . Best is to connect with Small lipo 2-3 cells, or attach to Balance port of large lipo and use 2-3s from this source.
You can attach the sheet to  Drone, heli, or on the boom and fly in the dark.
Alternatively, Print your name, stick on the sheet and it will glow in the dark, turn on and you have a beautiful lighted sign!
 
One driver can feed up to 3 sheets.
Set include 1 Glow sheet and 1 Driver/ inverter

Color- choose yours from Blue/White/Yellow/Red

Light your Racer. Fits perfectly The new Sky hero Anakin ( you need 2 leds ) and many other quads. Make yours glowing in the dark.

Specs:

• 3 x 3528 LED's on board, means a lot of Light
• Input: 3-4s lipo
• Weight: 0.7gr
• Size: 26 x 7 x 3. m
• Availiable colors: Red / Green / Blue

Pre-soldered 20cm wire

Set inclusive of 1 led. double side sticker for easier attachment is included.

Light your Racer. Fits perfectly any racers, helis, airplaines.Make yours glowing in the dark.

Specs:

• 6 x5730 LED's on board, means a lot of Light
• Input: 3-4s lipo
• Weight: 1.5 gr
• Size: 50 x 9 x 2.5mm
• Color: Red 

Set inclusive of 1 led board
Double side sticker for easier attachment is included.

36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

Specification:

• Beam angle: 120°
• Power consumption： 1.7W
• Voltage： DC 12V
• Lumens: 140-160LM
• SMD : 3014 (36 LED)
• Size: 30 (dia) x 41mm (total lenght)

Material:

• Composite

Led Strip, with powerful SMD leds, can be glued any where. Popular on Night flying machines, Quad copters, and more.

Comes with adhesive material, can be cut each 5cm.

Dimensions: 8mm width SMD Flexible strip series, 60LEDs/meter

Available colors- White, Red, Yellow, Blue, Green .
Sold per 1 Meter.

Lighting ready set with plug & with 8 Hight Power LEDs
For model planes and helicopters

Specifications:

• Operating voltage: 4 - 6V (or 2S LiPo)
• Current: 1200mA
• Dimensions of the control unit: 55 x 55 x 10 mm
• colored 5mm LED's (bright, flashing)

Lighting ready set with plug with 8 highly competitive LEDs, ideally for flight models, Helicopter and Multicopter!

Simply connect the LED cables finished with plug with the LM-1 tax unity and connect whole with a power source of 4-6 volts (e.g., on a free output socket).

Extent of supply:

Tax unity LM-1 2 x white LED (shining) 1 x green LED (shining) 1 x red LED (shining) 2 x white LED (stroboscopic shining) 2 x red LED (slowly shining)
Small parts, manual German / English

Technical data:

• Input voltage = 4.0-6.0V
• Current admission = 30 mA
• Dimensions (LM-1) = 34 x 26 x 12 mms
• Dimensions LED = 5 mms (diameter), (9-mm construction)
• Weight(Importance) (LM-1) = 9 gs / complete set cable with LED = 19 gs
• Cable length LED = 600 mms (extendable)

Great for making your own lighted signs. Sheet comes as Square of 10x10cm
Kit comes with 6-12 volt driver . Best is to connect  Small lipo of 2-3 cells, or attach to Balance port of larger lipo and use 2-3s from this source.
You can attach the sheet to a Drone, heli, or on the boom and fly in the dark.
Alternatively, Print your name, stick on the sheet and it will glow in the dark,  turn on and you have a beautiful lighted sign!

One driver can feed up to 3 sheets.
Set include 1 Glow sheet 10x10cm and one Driver

different colors available: Yellow, Red, White

Great for making your own lighted signs. Sheet comes in round shape of D8 cm
Kit comes with 6-12 volt driver . Best is to connect  Small lipo of 2-3 cells, or attach to Balance port of larger lipo and use 2-3s from this source.
You can attach the sheet to a Drone, heli, or on the boom and fly in the dark.
Alternatively, Print your name, stick on the sheet and it will glow in the dark,  turn on and you have a beautiful lighted sign!

One driver can feed up to 3 sheets.
Set include 1 Glow sheet 8CM round and one Driver

different colors available: Yellow, Red, White

Complete set includes two (2) Hi-Lum contrasting glow wires of 1 meter long, and Double glow wire Driver.
All connectors are pre installed , just add your small lipo 2s 300-1000mh

That all you need, and it's ready to fly.
The dual controllers increase brightness significantly.

High-intensity light wire that glows strong at night.

The driver ( a tiny black box ) can power up to three light wires each measuring at 1-2 meter long and can run for about 4 hours on a battery, recommended to use 2-3s Lithium.
The Cool lights produces no heat and very flexible and bendable so you can wrap it over the Helicopters boom, canopy and other surfaces.
Shake proof, impact proof and very versatile each install cold wire produces no electromagnetic wave so it will not interfere with the Helicopter’s receiver signals which is very important.

Our Night Wires are especially produced for Military Night Flying, and used on many UAV's and other applications where most of reliability needed.
Those Wires are produced in Europe, and producing 25% more illumination compared to their competitors. And all this without extra consumption of power. very high efficiency

Thicknesses of 2.5mm, flexible and 1 meters Long.

You will need converter(Driver) and Battery 7.4-12v.

Driver box from 7-12v . up to 3 Night Wires can be connected to this box, providing you with the best lumination for night flying.
This driver comes with 2 connectors for wires.
Small size 27 x 28 x 27 mm and lightweight - less then 10 grams make this driver a perfect solution for Night flying.

Connect 2- 3s lipo/Li-on, or 9V battery and you have Hours of continious night flying. 80ma consumtion only.

Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

• Used for a drone
• Suit for a tube which dia is 15-30mm
• Waterproof and 3 working modes
• 2x2032 battery
• Product weight:22g
• Cool design suit for riding at night

Material:

• 100% nature friendly grade silicone,non-toxic
• RED Aluminum anodized

A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

Specification:

• Light Source Type    LED
• Light Source Color    7500-8500K
• Lumens (Max)    20 LM

• Housing Color: Red, Light color- Red
  
• Material    Aluminum Alloy + Plastic

Construction:

• Water Resistant    Yes
• Electronic Components
• Output Current    60 mA
• Flashlights
• Flashlight Modes :2, Hi > Strobe
• Switch Type    Forward Click

Power & Batteries:

• Batteries Included    Yes
• Battery Form Factor    CR2032
• Estimated Usage Time  3-6 hours

Dimensions:

• Depth    34.6 mm
• Height    112 mm
• Width    27.6 mm
• Product Weight    28 g
  

A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

Specification:

• Light Source Type    LED
• Light Source Color    7500-8500K
• Lumens (Max)    20 LM

• Housing Color:black, Light color- White
• Material    Aluminum Alloy + Plastic

Specification:

• Light Source Type    LED
• Light Source Color    7500-8500K
• Lumens (Max)    20 LM

Construction:

• Water Resistant    Yes
• Electronic Components
• Output Current    60 mA
• Flashlights
• Flashlight Modes    Hi > Strobe
• Mode Count    2
• Mode Memory    No
• Switch Placement    Head
• Switch Type    Forward Clicky

Power & Batteries:

• Batteries Included    Yes
• Battery Form Factor    CR2032
• Estimated Usage Time    3-6 hours

Dimensions

• Depth    34.6 mm
• Height    112 mm
• Width    27.6 mm
• Product Weight    28 g
  

This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.
Flexible rubber strap: quick release & mounting onto any bar of 20-35mm

Light Color: Red
Case : Silicone red
2 modes: Flash, Constant light
Light visible till 300 Meters
Power supply: 2x CR2032 per light (incl.)
Weight: ±20g/light