Kontronik Motors

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 15-110

• 1100 U/min/V
• max 20.000 U/min
• 600 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 19 mΩ Ri
• 14 Poles
• 153 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 15-69

• 690 RPM/V
• max 20.000 RPM
• 600 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 47 mΩ Ri
• 14 poles
• 150 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 15-79

• 790 RPM/V
• max 20.000 RPM
• 600 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 36 mΩ Ri
• 14 poles
• 150 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 15-110

• 920 RPM/V
• max 20.000 RPM
• 600 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 28 mΩ Ri
• 14 poles
• 152 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 25-41

• 410 RPM/V
• max 20.000 RPM
• 800 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 64 mΩ Ri
• 14 poles
• 216 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 25-47

• 470 RPM/V
• max 20.000 RPM
• 800 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 50 mΩ Ri
• 14 poles
• 216 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 25-55

• 550 RPM/V
• max 20.000 RPM
• 800 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 50 mΩ Ri
• 14 poles
• 216 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.
The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.
Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

• High temperature resistant neodymium magnets heat resistant up to 150 °C
• Single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
• extremely stable and durable ball bearings
• case-hardened shaft
• corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm   
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories)
• 14 poles

KONDOR 25-65

• 650 RPM/V
• max 20.000 RPM
• 800 W
• 18 mm free shaft lenght
• 5 mm shaft diameter
• 26 mΩ Ri
• 14 poles
• 218 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.

The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.

 Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

•     high temperature resistant neodymium magnets heat resistant up to 150 °C
•     single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
•     extremely stable and durable ball bearings
•     case-hardened shaft
•     corrosion-resistant coating of the rotor

Technical specifications:

•     compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
•     shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm
•     air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
•     weight 150-398 g (without accessories)
•     14 poles
•     410 RPM/V
•     370 RPM/V
•     max 20.000 RPM
•     1.000 W
•     18 mm free shaft lenght
•     6 mm shaft diameter
•     52 mΩ Ri
•     14 poles
•     287 g (additional weight for back mounting 50 g)

    Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.

 The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.

 Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

•     high temperature resistant neodymium magnets heat resistant up to 150 °C
•     single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
•     extremely stable and durable ball bearings
•     case-hardened shaft
•     corrosion-resistant coating of the rotor

Technical specifications:

•     compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
•     shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm
•     air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
•     weight 150-398 g (without accessories)
•     14 poles
•     410 RPM/V
•     max 20.000 RPM
•     1.000 W
•     18 mm free shaft lenght
•     6 mm shaft diameter
•     26 mΩ Ri
•     14 poles
•     292 g (additional weight for back mounting 50 g)

    Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.

The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.

 Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

•     high temperature resistant neodymium magnets heat resistant up to 150 °C
•     single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
•     extremely stable and durable ball bearings
•     case-hardened shaft
•     corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL)
• with free wavelength 18 mm air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter weight 150-398 g (without accessories)
• 14 poles
• 470 RPM max 20.000 RPM 1.000 kW 18 mm
• free shaft lenght 6 mm shaft diameter
• 26 mΩ Ri
• 14 poles
• 294 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.

The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.

 Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

•     high temperature resistant neodymium magnets heat resistant up to 150 °C
•     single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
•     extremely stable and durable ball bearings
•     case-hardened shaft
•     corrosion-resistant coating of the rotor

Technical specifications:

• compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
• shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL)
• with free wavelength 18 mm
• air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
• weight 150-398 g (without accessories) 14 poles
• 550 RPM/V max 20.000 RPM 1.000 W
• 18 mm free shaft lenght
• 6 mm shaft diameter
• 20 mΩ Ri
• 14 poles
• 294 g (additional weight for back mounting 50 g)
• Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight.

The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each.

 Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly.

The KONDOR in short:

•     high temperature resistant neodymium magnets heat resistant up to 150 °C
•     single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power
•     extremely stable and durable ball bearings
•     case-hardened shaft
•     corrosion-resistant coating of the rotor

Technical specifications:

•     compact and robust design (up to 50 mm in diameter, up to 61 mm in length)
•     shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm
•     air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter
•     weight 150-398 g (without accessories)
•     14 poles
•     280 RPM/V
•     max 20.000 RPM
•     1.300 W
•     18 mm free shaft lenght
•     6 mm shaft diameter
•     49 mΩ Ri
•     14 poles
•     395 g (additional weight for back mounting 50 g)
•     Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

KONDOR: The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight. The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each. Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly. The KONDOR in short: high temperature resistant neodymium magnets heat resistant up to 150 °C single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power extremely stable and durable ball bearings case-hardened shaft corrosion-resistant coating of the rotor Technical specifications: compact and robust design (up to 50 mm in diameter, up to 61 mm in length) shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter weight 150-398 g (without accessories) 14 poles 320 RPM/V max 20.000 RPM 1.300 W 18 mm free shaft lenght 6 mm shaft diameter 36 mΩ Ri 14 poles 397 g (additional weight for back mounting 50 g) Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

KONDOR: The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight. The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each. Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly. The KONDOR in short: high temperature resistant neodymium magnets heat resistant up to 150 °C single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power extremely stable and durable ball bearings case-hardened shaft corrosion-resistant coating of the rotor Technical specifications: compact and robust design (up to 50 mm in diameter, up to 61 mm in length) shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter weight 150-398 g (without accessories) 14 poles 370 RPM/V max 20.000 RPM 1.300 W 18 mm free shaft lenght 6 mm shaft diameter 27 mΩ Ri 14 poles 398 g (additional weight for back mounting 50 g) Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

KONDOR: The new engine series from KONTRONIK. The KONDOR is an external rotor motor for surface flight. The KONDOR is currently available in a total of 16 variants. For the KONDOR 15, KONDOR 25, KONDOR-XL 20 and KONDOR-XL 30 there are 4 different kv variants each. Included in delivery and price is already a high quality set consisting of propeller driver with mounting cross. This makes it easy to convert the KONDOR even for the back frame assembly. The KONDOR in short: high temperature resistant neodymium magnets heat resistant up to 150 °C single-wire winding with high-temperature-resistant wire for particularly good ventilation, heat dissipation and more power extremely stable and durable ball bearings case-hardened shaft corrosion-resistant coating of the rotor Technical specifications: compact and robust design (up to 50 mm in diameter, up to 61 mm in length) shaft diameter 5 mm (KONDOR) or 6 mm (KONDOR-XL) with free wavelength 18 mm air screw driver for 8 mm (KONDOR) or 10 mm (KONDOR-XL) bore diameter weight 150-398 g (without accessories) 14 poles 440 RPM/V max 20.000 RPM 1.300 W 18 mm free shaft lenght 6 mm shaft diameter 23 mΩ Ri 14 poles 392 g (additional weight for back mounting 50 g) Included in delivery is a high-quality conversion kit consisting of propeller driver with mounting cross for rear mounting

Kontronik MICROPYRO 380-09

The MICROPYRO 380-09 has been specially designed and tested for use in electric helicopters to set new standards for the propulsion of electric helicopters.
The Micropyro is the ideal engine for the Goblin 380 from SAB.

Characteristics:

• Neodymium magnets heat resistant up to 150 degrees Celsius
• Special enamelled wire up to 300 degrees C
• Fine balanced
• Adapted sheet metal section
• Optimized airflow
• radial fan
• Optimized magnetic circuit

Technical specifications:

• Speed per volt: 920 rpm / V
• Power: 800W
• Pole: 14
• turns: 12
• Input voltage: 11.1V - 22.2V
• Max. permissible speed: 35000
• Max. Efficiency approx .: 87%
• Motor shaft: 5x22mm
• Dimensions: 40.5x41.5mm
• Weight approx .: 150g

MINIPYRO 400-10

For 450 or 500 sized helicopters the MINIPYRO 400 is the right choice. Same materials as in all PYROs make the MINIPYRO 400 being a real PREMIUM LINE product.
Two different RPMs are available to fit perfectly in applications up to 6S. The gearbox variants are lubricated with DryFluid ex factory.
1 kW continuous power allows 3D acrobatic flight at its finest.

MINIPYRO in short:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit
• 1.000 RPM/V   
• max. 24.000 RPM/min
• 1 kW continuous
• 14 poles
• 11 inner resistance

Specifications:

• 5 mm shaft diameter
• 23,5 free shaft length
• 195 g

MINIPYRO 400-13

For 450 or 500 sized helicopters the MINIPYRO 400 is the right choice. Same materials as in all PYROs make the MINIPYRO 400 being a real PREMIUM LINE product.
Two different RPMs are available to fit perfectly in applications up to 6S. The gearbox variants are lubricated with DryFluid ex factory.
1 kW continuous power allows 3D acrobatic flight at its finest.

MINIPYRO in short:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit
• 1.300 RPM/V   
• max. 33.000 RPM/min
• 1 kW continuous
• 10 poles
• 10,5 inner resistance

Specifications:

• 5 mm shaft diameter
• 23,5 free shaft length
• 190 g

Kontronik PYRO 1000-40L

The new PYRO 1000-40L is here.
An 8kW engine, which hardly a controller can work up a sweat.
With an incredible power-to-weight ratio of 9.3 watts per gram, the PYRO 1000-40L is not only powerful, but also extremely compact and lightweight.
This makes it perfect for speed helicopters, but also in large helicopters and surface models, the PYRO 1000 is a guarantee for performance without end.

Technical specifications:

• Rpm / V: 400
• Speed: Max. 30,000 rpm
• Pole: 14
• Continuous power: 8 kW
• Weight: 860g
• Diameter: 63mm
• Length: 80mm
• Wavelength (free): 55mm
• Shaft diameter: 8mm
• Internal resistance: 7.5mOhm
• Efficiency: up to 90%

Kontronik PYRO 1000-48L

The new PYRO 1000-48L is here. A 10kW engine, which hardly a controller can work up a sweat.
With an incredible power-to-weight ratio of 11.5 watts per gram, the PYRO 1000-48L is not only powerful, but also extremely compact and lightweight.
This makes it perfect for speed helicopters, but also in large helicopters and surface models, the PYRO 1000 is a guarantee for performance without end.

Technical specifications:

• Rpm / V: 480
• Speed: Max. 30,000 rpm
• Pole: 14
• Continuous power: 10 kW
• Weight: 870g
• Diameter: 63mm
• Length: 80mm
• Wavelength (free): 55mm
• Shaft diameter: 8mm
• Internal resistance: 5.2mOhm
• Efficiency: up to 90%

Kontronik PYRO 600-09 Brushless Motor is specially designed for use in high performance models and was developed for the popular 500 sized helicopters. In this application the motor can unfold his full power and performance. The RPMs are suitable for applications up to 8S. To transmit its enormous power in each assembly situation the PYRO 600 comes with a 6mm shaft diameter. 2 kW continuous power in these helicopters allow 3D acrobatic flight you always have been dreaming of.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 900
• RPM max: 28.000
• Continuous Power: 2kW
• Weight: around 220gr
  
• Shaft diameter: 6mm
• Poles: 14
• Inner resist.: 11mΩ

Kontronik PYRO 600-11 Brushless Motor is specially designed for use in high performance models and was developed for the popular 500 sized helicopters. In this application the motor can unfold his full power and performance. The RPMs are suitable for applications up to 8S. To transmit its enormous power in each assembly situation the PYRO 600 comes with a 6mm shaft diameter. 2 kW continuous power in these helicopters allow 3D acrobatic flight you always have been dreaming of.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 1100
• RPM max: 28.000
• Continuous Power: 2kW
• Weight: around 220gr
• Shaft diameter 6mm
• Poles: 10
• Inner resist.: 12.5mΩ

Kontronik PYRO 600-12 Brushless Motor is specially designed for use in high performance models and was developed for the popular 500 sized helicopters. In this application the motor can unfold his full power and performance. The RPMs are suitable for applications up to 8S. To transmit its enormous power in each assembly situation the PYRO 600 comes with a 6mm shaft diameter. 2 kW continuous power in these helicopters allow 3D acrobatic flight you always have been dreaming of.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 1200
• RPM max: 28.000
• Continuous Power: 2kW
• Weight: around 220 gr
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 11mΩ

Kontronik PYRO 650-103 L Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters.
The PYRO 650 can handle up to 3kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 1030
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 290 gr
  
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 12mΩ

Kontronik PYRO 650-103 L Competition Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters. The PYRO 650 Competition can handle up to 3.5kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 1030
• RPM max: 25.000
• Continuous Power: 3.5kW
• Weight: around 290 gr
• Shaft diameter: 6mm
• Poles: 10

Kontronik PYRO 650-62 L Competition Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters. The PYRO 650 Competition can handle up to 3.5kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 620
• RPM max: 25.000
• Continuous Power: 3.5kW
• Weight: around 290 gr
• Shaft diameter: 6mm
• Poles: 10

Kontronik PYRO 650-62L Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters.
The PYRO 650 can handle up to 3kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 620
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 290 gr
  
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 26mΩ

Kontronik PYRO 650-65 Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters.
The PYRO 650 can handle up to 3kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 650
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 290 gr
  
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 24mΩ

Kontronik PYRO 650-65 L Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters.
The PYRO 650 can handle up to 3kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 650
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 290 gr
  
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 24mΩ

Kontronik PYRO 650-65 L Competition Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters. The PYRO 650 Competition can handle up to 3.5kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 650
• RPM max: 25.000
• Continuous Power: 3.5kW
• Weight: around 290 gr
• Shaft diameter: 6mm
• Poles: 10

Kontronik PYRO 650-78 L Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters.
The PYRO 650 can handle up to 3kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 780
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 290 gr
  
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 19mΩ

Kontronik PYRO 650-78 L Competition Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters. The PYRO 650 Competition can handle up to 3.5kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 780
• RPM max: 25.000
• Continuous Power: 3.5kW
• Weight: around 290 gr
• Shaft diameter: 6mm
• Poles: 10

Kontronik PYRO 650-83 L Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters.
The PYRO 650 can handle up to 3kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 830
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 290 gr
  
• Shaft diameter: 6mm
• Poles: 10
• Inner resist.: 17.5mΩ

Kontronik PYRO 650-83 L Competition Brushless Motor perfectly fits into the PYRO family and is almost as strong as the PYRO 700. It is the perfect motor for 550 / 600 sized helicopters. The PYRO 650 Competition can handle up to 3.5kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 830
• RPM max: 25.000
• Continuous Power: 3.5kW
• Weight: around 290 gr
• Shaft diameter: 6mm
• Poles: 10
• Inner. Resis: 10mΩ

Kontronik PYRO 700-34 L Competition Brushless Motor is a real PREMIUM LINE product. The PYRO 700 Competition is the ultimate motor for all helicopter pilots who know how 3D must look like. In such a 3D application the motor is heavily stressed. And it is exactly what a PYRO 700 is well equipped for.

To use the PYROs to full capacity it can be reasonable to mount a counter bearing. So all versions of the PYRO 700 are additionally available with 3 different shaft length. The PYRO 700 is the motor for 600 and 700 sized helicopters. More than 3 kW continuous power make nitro engines pale. The RPM fits perfectly to applications up to 12S.

Features:

• Neodym magnets, heat resistent up to 150 degree C
• Dedicated enameled wire, heat resistent up to 300 degree C
• Optimized metal sheets
• Optimized ventilation
• Radial fan
• Optimized magnet circuit

Specifications:

• RPM/V: 340
• RPM max: 25.000
• Continuous Power: 3kW
• Weight: around 375gr
• Shaft diameter 6mm
• Poles: 14