Kits & ARF

Jonny 2 is the official successor of the legendary Jonny by Ing.Wilfried Klinger. At that time it was designed for glow ignition engines, but we have consistently further developed the model for electric drives. The Jonny 2 is significantly lighter and more maneuverable than its predecessor and is unbelievable fun. The Jonny is the ideal all-round model for every day. No matter if beginner, advanced or professional: The Jonny inspires every pilot. The Jonny can easily tow sailors with a wingspan of up to 3 m. With the floats available as accessories, the Jonny is also perfect for sea flights. The attachment points on the fuselage floor are provided at the factory.

Product

features * ARF finished model in wood construction (laser cut)

* Fully covered as shown

* Highest degree of prefabrication

* Two-part wings with aluminum tubes

* Robust undercarriage made of duralumin

* Good-natured flight characteristics * Fully aerobatic

* Wheels, articulations, small parts, illustrated Instructions

Technical data

• Wingspan = 1550mm
• Length = 1120mm
• Weight = 1900 .. 2100g
• R / C functions = Rudder , elevator, ailerons, motor
• channels = 4/4 servos

Almost ready to fly semi-scale model (1500 mm wingspan) of a Swiss STOL utility aeroplane. Made of carbon-reinforced expanded polyolefin (EPO); KAVAN C3548-750 brushless motor, 10x6” three blade prop, R-40SB ESC and 6 micro servos installed. “Full house“ aileron, flap, elevator, rudder and throttle control; steerable tail wheel/water rudder, LED lights. For 4S LiPo 2600–3300mAh (at least 30C) battery

The single-engine Swiss STOL utility aircraft Pilatus PC-6 Porter, originally powered by the Lycoming flat six cylinder engine, made its maiden fight in 1959. Soon an improved Turbo-Porter powered by a turboprop engine followed. Over the years Turbomeca Astazou II, Garret Air Research TPE 331 and ultimately Pratt & Whittney Canada PT6A (about 70% of all PC-6 ever produced) turboprops have been taking this beautiful plane to the sky.

Incredible, almost helicopter-like short takeoff and landing capabilities have quickly gained attention of military as well as commercial operators. Fitted with wheeled undercarriage, skis or floats, Porters have been serving reliably and relentlessly all over the world - flying over deserts, jungles, lakes, mountains, snow and ice - simply everywhere. No wonder the PC-6 holds the world record for highest landing by a fixed-wing aircraft, at 18,865 feet (5,750 m), on the Dhaulagiri glacier in Nepal.

After 604 deliveries in 63 years, Pilatus ended production in 2022... And now you can enjoy flying with our 1500 mm wingspan semi-scale model of this beautiful sailplane powered by a brushless motor.

The EPO foam fuselage, thoroughly carbon-reinforced, comes with the KAVAN C3548-750 brushless motor, 10x6” three blade propeller and KAVAN R-40SB ESC featuring a powerful switching SBEC stabilizer necessary to feed all 6 servos aboard. The battery compartment (under a removable hatch in the nose) offers a lot of space for your flight pack.

The two-piece EPO wing is reinforced by carbon spars and joined together with a carbon tube joiner. The wing is secured by bolts to the fuselage. The ailerons and flaps are controlled by two pairs of servos installed in the wing driven with short wire push rods; there are position and landing LED lights installed as well. The easy-to-install carbon wing struts are secured with a pair of wire clips.

The empennage is made of the EPO foam. The elevator servo is installed in the fuselage, the rudder servo is installed in the fin.

The main undercarriage has steel wire legs with scale telescopic struts; the steel wire tailwheel is coupled with the rudder. You can purchase an optional floats set for your Porter - installation of the floats and water rudder is a matter of minutes.

PC-6 is powered by the KAVAN C3548-750 brushless motor with the KAVAN R-40SB 40A ESC.

You will need 14.8 V 2600-3300 mAh flight pack (at least 30C) to fly your Porter.

Wing span [mm] 1500
Length [mm] 1112
Wing surface [dm2] 27.9
Weight [g] 1650 - 1700
Build difficulty - Easy

ARTF set contents
EPO fuselage with the brushless motor, 40A ESC,
10x6" 3-blade propeller and servos installed
EPO wing with 4 servos and LED lights installed,
EPO horizontal tail plane, undercarriage and instruction manual.

This is a ARTF model, please read the description of what you get. Be aware of size, shipping cost to be verified before shipping.

This model is big! 2500mm is impressive by any standard, yet the model is very practical for instance the highly efficient balsa wing is removable for transportation, both the front and rear hatches are secured by strong magnets for easy & fast access, This model is very easy to handle in the air, can be used as Stand alone (AS normal RC model or fully autonomous with Autopilot)- we recommend the Cyclops Tornado.

The model comes Pre-built, never flown, but including the Motor, ESC, Propeller, pre-installed Servos, Camera and VTX. 

As option we recommend the Autopilot Cyclops Tornado OSD, any other Autopillot as Pixhawk or APM will perfectly fit.

Specs:

1. Wingspan: 2500mm
2. Large cabin for containing FPV equipment.
3. Max payload 6 Kg
4. Max Speed 80km/h
5. Cruise speed 50km/h
   
6. Length: 1080mm
7. Wing Area: 32.5dm2
8. Wing Loading: 76-83g dm2
9. Airfoil: Eppler 374 Mod
10. Weight: 2500g~2700g

Included/Preinstalled

• Model delivered Assembled, with Brushless Motor for 4-6 S, ESC 
• Castle Bec
• Fatshark Camera
• VTX+ Antenna
• Blue Bird servos
• Wing has 2 servos each, Aileron and Flaps
• No other electronics e.g battery/receiver included
  

The Commander 3 is the official successor to the legendary Commander by Ing. Wilfried Klinger. At that time designed for glow ignition engines, we have consistently further developed the model for electric drives. The Commander 3 is significantly lighter and more maneuverable than its predecessor and is incredibly fun. The Commander can be flown with either a 3S or 4S LiPo battery (3500-4500mAh).

At that time, the Commander ushered in a new era of RC1 aerobatic models. Whether advanced or professional: The Commander inspires every pilot. The model comes with a rigid 3-leg landing gear, but is prepared for the installation of a retractable landing gear.

Product features * ARF finished model in wood construction (laser cut)
* Ready-covered as shown
* Highest degree of prefabrication
* Wings 2-part with aluminum tube connection
* Rigid landing gear with steerable nose gear
* Electric retractable landing gear optionally available
* Fully aerobatic capable and still good-natured
* Wheels, linkages, small parts, illustrated Instructions

Technical data
Wingspan = 1550mm
Length = 1120mm
Weight = 2100 -2300g incl. drive battery
R/C functions = rudder, elevator, aileron, motor controller
Channels = 4 / 4 servos

Wingo 2 for the joy of model flying Wingo is one of the best entry-level model aircraft, which came on the market in 1998 and has been sold successfully worldwide for many years. The model is now technically modified and available again. The Wingo 2 is made of lightweight EPO foam and is therefore even more stable and durable. All previous wooden parts have been replaced by injection-moulded plastic parts, which simplifies the assembly and reduces it to a few hours. The wing is screwed to the fuselage dome with a 5 mm plastic screw. The wing struts can be attached without tools and give the Wingo 2 additional stability. The brushless motor supplied is specially tuned to the Wingo 2 and gives the model good controllability even at low airspeed thanks to its pressure drive. Both the motor and the speed controller are already wired and equipped with reverse polarity protection. Plug connections soldered ready for installation. Motor and controller have power reserves to be able to use the Wingo 2 optionally also for the water start with float. Therefore 2 propellers of different sizes are already included with the model. The small 5 x 4" propeller is ideal for beginners as the Wingo 2 climbs away flat and does not have a large load change from idle to full throttle. This makes model flying easy to learn. If you have practice and enough flying experience, the enclosed larger 6.7 x 3.5" propeller can be mounted. With this propeller the drive power increases by approx. 15%. The climb behaviour is thus increased and the propulsion power is strong enough to start the Wingo 2 with float (optionally available) on the water. The power supply is a 3s 1100 mAh Lipo battery, which is also equipped with a reverse polarity protected plug connection and is available separately. The new self-adhesive decor has been designed so that the top and bottom sides are very different. This means that the pilot can easily see the flight attitude of the model. The detailed, illustrated construction stage description guarantees easy and safe Final assembly. =Specifications

• Wing-span  1100 mm
• Weight : +-530g
• Rec. engine :   RO-POWER 2822-23
• Manufacturer : ROBBE
• Fuselage EPO
• Wings : EPO
• Version : KIT
• Rec. Battery : 3S/1100mAh LiXX
• Antriebsart:  Elektro
• Flight Skill :    Beginners
• Building Skill :    Beginners

Contents

• largely finished model made of high-quality EPO moulded foam
• Aluminium tail unit carrier pluggable for better transport of the finished model
• high-quality decal sheet
• Plastic parts set for quick assembly
• Brushless controller Ro-Control 25A BEC ready wired
• Brushless motor Ro-Power 2822-23 ready wired
• Airscrew 5x4"
• Propeller 6,5x3,5"
• 2pcs. S0009 Rovor Servos
• Seat shell
• EPS transport device
• Small parts
• extensive, illustrated assembly instructions in German/English/French

This is a set of covers for Sabre 1.5m. 
cover set made to keep and protect the model in transport and storage

Including Set of covers for Wings( 2 pcs), Fuselage 1pc, Horiz stabiliser- 2pc and tail rudder- 1pc.

New in our range of products- we happy to introduce the all-new 1.5m Electric F5K model that is ‘Sabre’……

This glider has a new wing aerodynamics.
The idea was to have a wing that would not only perform well with low lift, but also penetrate well into the wind, achieving extremely low drag and thermal efficiency.

With the new release of the thin but powerful KST X06 which was released during the design phase, were able to get a thin enough wing with a direct drive servo for the flaperon, thus now only having two servos in the fuselage to control the altitude rudder and rudder direction this made it possible to create a thinner fuselage.
Two-section wings which makes storage and transportation easier and convenient for shipping a smaller box around the world;
This is achieved with a single wing connector and each wing panel is attached to the fuselage with 4 screws, which is simple and very efficient.

The Sabre is manufactured from the highest quality materials, the construction is fully carbon fiber using CW30,20,40,58 bi-axial carbon fabric wings and tail plane made of Rohacell hard core.

The model comes in a variety of options with aileron wires and a 3-pin connector already installed in each wing. The fuselage also comes with matching 3-pin connectors and connecting wires with pre-installed connectors for the JR servos. This is another difference between this model and its competitors in terms of quality and reduced assembly time.

The glider can be supplied in a variety of colors, using 30,20,40,58 g/m2 density CW carbon fabrics.
Contact us for your desired color scheme and options.

The fuselage has been designed to fit a 25mm Carbon Spinner.

Optional you can have it with Cover set or with CN models 25mm spinner and 7x4 folding carbon prop.

Power unit including the Cobra Motor and 20A esc and connectors.

Specifications:

Length: 882mm
Wingspan: 1497 mm
Wing area: 18 dm2
Wing elongation: 12,45
Impact area: 2.16 dm2
Fin area: 1.4 dm2

Average weight: 230Gr

Current colors are Orange and Yellow (can be seen on the other images)

Recommended material for Sabre 1.5

Servos KST X06
Battery 2s-3s 500-550mah
Motor- 23mm
ESC- 30-35Amp, compact size
Servos (4) -KST X06

Sabre F5K Weight Data (g)
Layup	Light Carbon	Regular Carbon	Strong Carbon
Fuselage	31 – 36
Wing	82 – 88	88 – 94	95 – 100
Horisontal Stabilizer	6.2 – 6.9
Vertical Fin	4.2 – 4.9
Accessories and glue	8.5
Flying weight from	240	230	220

A model that many fans have been waiting for: The Savage Bobber as an ARF finished model in 1:5 scale. The open fuselage construction is characteristic.

Product features * ARF finished model in wood construction (laser cut)

Scope of delivery

* ARF finished model in wood construction (laser cut)

* Composite wood/carbon fuselage

* Completely covered as shown

* Painted hood

* Stable chassis

* Balloon Wheels

* Small parts, accessories, illustrated instructions

Technical data

Span = 1880mm

Length = 1300mm

Weight = approx. 3800g

R/C functions = rudder, elevator, ailerons, flaps, motor

Antic is a recreational and training model, it is made of classic construction - balsa and plywood, covered with Oracover foil. The shapes of this model reminds the early aviation. Thanks to its conception this model has a qualities of worthy trainer aircraft and can fly the basic aerobatic maneuvers as well.

It is controlled by the ailerons, elevator, rudder and motor.

• fuselage constructed in balsa wood - covered with ORACOVER foil
• two parts wing made with a balsa framework - covered with ORACOVER foil
• lightweight tail surfaces - all covered with ORACOVER foil
• wire landing gear + wheels
• polystyrene pilot
• high quality accessories (servo covers, servo mount, motor mount, rods, control horns, ending ties, ...)
• decal sheet
• step by step fully illustrated manual
  

Wingspan: 1600mm
Length: 1250mm
weight: 1.8-2.0kg
Electric version
4ch radio

Aerobatic glider (electric glide) for sports and competitions flying. Flip is delivered as a glider. Parts for the electrification are supplied in the kit, including preparation for cutting the front of fuselage.

Flip is designed for sports and acrobatic flying on a slope or on a flat. You can fly on the flat as a glider or with the electrified version as well. Start is possible using towing, or aero tow (you must install towing hook).

Motorization is designed for a capacity 3S Li-Po 2 - 4Ah. Flip is a skillful glider which readily responds to control commands. Due to the large area of ​​the body side handles and maneuvers such as roll on time and knife years. Even when thermal flying gives a surprisingly good performance.

The wing structure is polystyrene-balsa, supplemented spar and fiberglass reinforcement. The hull is fiberglass, white-colored, complete with fiberglass cab.

Floating elevator is balsa construction with carbon spar and leading edge. The elevator is easily removable.

Also the rudder is balsa construction.

The kit contains:

• Fiberglass fuselage in glider version with carbon reinforcement and fiberglass canopy
• Two-piece foam–balsa wing
• Elevator is made in a balsa framework with carbon spar and leading edges
• rudder is made in a balsa framework
• All covered with Oracover
• cutting template for the nose of fuselage
• Top quality accessories (servo covers, servo mount, rods, ending ties, control horns, carbon wing joiner, tape for sticking flaps, fiberglass motor mount,...)
• Decal sheet
• Complete assembly manual with step by step illustrations

Wingspan: 1999mm
Length: 1350mm
weight: 1.8-2.1kg
Electric/glider version
5ch- 4 servos

The TechOne Vanth F3P was designed by Filippo Materazzi, the F3P, Aeromusical and F6A Italian Champion. An innovative and high quality F3P plane especially designed for durability and yet extremely lightweight. Made with 3mm Depron milled (painted on both sides) and HCF, a special technique that uses a transparent film glued on Depron.

The specially designed Vanth F3P is able to fly extremely slow, as well as perform fast maneuvers like precise snaps, spins, and knife edges. The perfect solution for both indoor competition and beginners to indoor flight thanks to its incredibly smooth flight characteristics.

FEATURES:

• Slick, streamlined and aerodynamic profile available in an eyecatching blue and purple livery
• Designed by F3P, Aeromusical and F6A Italian Champion Filippo Materazzi
• Easy-to-remove wing and landing gear for transport and flying preference
• Powerful AS2204 KV1700 Brushless motor for a wide flight performance envelope

INCLUDES:

• TechOne Vanth F3P 918mm (36") Wingspan - ARF BUNDLE
• 2204 KV1700 Brushless motor
• 10 Amp brushless ESC with JST connector
• 3x  micro servos