J-B Weld

J-B Weld 100% Hi-Temp Red Silicone Gasket Maker and Sealant is an RTV (Room temperature vulcanised) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher continuous temperatures up to 550 F or 650 F intermittent might exist.
Upon curing, which occurs when the product is exposed to the moisture in the air, the silicone forms a tough, long lasting, waterproof seal on most surfaces.
It will not shrink or crack, resists weathering, is sensor safe and is great for many automotive applications.

Great for the following applications:

• Oil Pans
• Valve Covers
• Exhaust Manifolds
• Water Pumps
• Timing Covers
• Differential Covers
• Drive Housing
• Oven Doors

Product Specifications

• Set Time: 1 Hour
• Cure Time: 24 Hours
• Cure Colour: Red

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial applications. J-B HighHeat epoxy outperforms conventional epoxy putties at high temperatures and sets in one hour at room temperature. After eight hours the HighHeat epoxy is fully cured to form a solid reliable bond.

HighHeat is rated at a tensile strength of 800 PSI and able to withstand continuous heat exposure of 204ºC (400ºF) and intermittent heat exposure to 260ºC (500ºF)

Great for the following applications:

• Exhaust Manifolds
• Tail Pipes
• Mufflers
• Engine Blocks
• Duct Work
• Machinery
• High Temperature Projects

Product Specification:

• Strength: Strength 800 PSI
• Set Time: 1 Hour
• Cure Time: 8 Hours
• Dries: Machine Grey

J-B KwikWeld is the fast setting version of The Original J-B Weld two-part epoxy cold weld system. J-B KwikWeld provides strong, lasting repairs to metal and other surface types. After mixing it will form a permanent bond which can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in six minutes and is fully cured within six hours.

Tensile strenght 2500 psi
Resistant to constant temperature up to 300c
Sets in 6 minutes. Full strenght in 4-6H
Bonds metal, plastic, ceramic, wood, masonary
Can be drilled, filled, sanded, machined, tapped and painted

Use on:

J-B MarineWeld is a specially formulated two-part epoxy cold weld system that will provide strong, lasting repairs. Bonding surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld will set in 20-25 minutes at room temperature and fully cures in under 24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and has been designed to retain its strength above or below the waters surface.

MarineWeld has a 1:1 mixing ratio and tensile strength of 3960 PSI.

Great for the following applications:

• Boats
• Personal Watercraft
• In/Outboard Engines
• Deck & Hull Accessories

Product Specification:

• Strength: 3960 PSI
• Set Time: 20-25 Minutes
• Cure Time: 15-24 Hours
• Cure Colour: Dark Grey

J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 370C (700 F)

Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard.

Projects: Mufflers, Pipe Joints and Exhaust Systems.

J-B Weld Syringe is the original cold-weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing.

At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. Full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550° when fully cured.

Static Mixers: Is an easy to use attachment to the syringe that allows for precise mixing of the two component adhesives. Each mixer comes with 16 static elements to ensure complete mixing. The mixer tip can be cut to allow for large and easier flow of material.

•     Household Repairs
•     Automotive
•     Plumbing
•     Marine
•     Hobby Crafts & More

Product Specification:

•     Strength: 5020 PSI
•     Set Time: 20-25 Minutes
•     Cure Time: 15-24 Hours
•     Cure Colour: Dark Grey

J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies and hundreds of other applications to prevent loosening of fasteners from shock and vibration.

J-B Weld Perma-lock Medium Strength Threadlocker is ideal for applications requiring easy disassembly with hand tools.

Great for the following applications:

•     Rocker Arms
•     Stud Bolts
•     Frame Bolts
•     Fasteners and Bushings
•     Loose Screws
•     Vibration Sensitive Items

Product Specification:

    Temperature: Resistant upto 148ºC (300*F)
    Ideal for 1/4" to 1" Fasteners
    OEM Approved
    No Spill, Drip or Clog Cap
    Sizes: 6ML

PlasticWeld is a fast-setting, hand mixable epoxy putty that forms a durable bond to major plastic types. After mixing, it will form a polymer compound that can be molded or  built up to repair just about any plastic. Once cured it can be drilled, carved, sanded and even painted. PlasticWeld has a 20-25 minute work life. PlasticWeld will cure to an off-white color in under three hours and is rated at a tensile strength of 350 PSI.

Does not adhere to polyethylene, polypropylene or some other plastics. We advise testing for suitability first.

Great for the following applications:

• Rigid & Semi Flexible Plastic
• ABS, PVC & CPVC Pipes
• Automotive Trim & Bumpers
• Fiberglass Parts
• Vinyl Siding

Product Specification:

• Strength: 350 PSI
• Set Time: 25 Minutes
• Cure Time: 3 Hours
• Cure Colour: Off White

JB WELD SteelStik is a non-rusting, steel reinforced epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded, built up or used to patch and repair steel components. SteelStik sets in three to five minutes and after sixty minutes, can be drilled, tapped, machined, ground, filed and even painted.

SteelStik is rated at a tensile strength of 900 PSI and will withstand temperatures of up to 148ºC (300ºF).

Great for the following applications:

• Automotive & Machine Parts
• Exhaust Systems
• Plumbing
• Stripped Threads
• Rust Damage
• Household Repairs

Product Specification:

• Strength: 900 PSI
• Set Time: 5 Minutes
• Cure Time: 1 Hours
• Cure Colour: Dark Grey

J-B WoodWeld is a fast setting two-part epoxy system formulated for wood bonding and repairs. It will provide a lasting permanent bond that is stronger than the wood! J-B WoodWeld can be shaped, tapped, filed, sanded and drilled sets in six minutes and cures in under three hours.

Rated at a tensile strength of 1800 PSI, J-B WoodWeld cures to a light tan color.

Great for the following applications:

• Indoor/Outdoor
• Furniture
• Doors
• Windows
• Trim/Moulding
• Decks & More

Product Specification:

• Strength: 1800 PSI
• Set Time: 6 Minutes
• Cure Time: 1-3 Hours
• Cure Colour: Light Tan

Use JB WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply J-B WELD, and let it cure. That's all there is to it!J-B Weld is an amazing formula which once binds will produce an ever lasting strong bind which will hold tight and not come loose. Often used on mount pinions to a motor’s main shaft.The pinion will not slip or fall once J-B is applied. The formula is easy to apply and comes in two tubes. J-B weld is a must have in anyone’s tool box and has been proven to be the de-facto in cold soldering in many R/C hobbies including Radio Controlled Hobbies

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. J-B Weld will form a permanent bond that once cured can be shaped, tapped, filed, sanded and drilled. At room temperature J-B Weld will set in 20-25 minutes to a dark grey color. A full cure is reached in under 24 hours.

J-B Weld can withstand temperatures up to 287ºC (550ºF) once fully cured.

We recommending to use this glue on clutches, metal( mufflers and engine parts) and much more.

Great for the following applications:

•     Household Repairs
•     Automotive
•     Plumbing
•     Marine
•     Hobby Crafts & More

Product Specification:

•     Strength: 5020 psi
  
•     Set Time: 20-25 Minutes
•     Cure Time: 15-24 Hours
•     Cure Colour: Dark Grey

Use JB WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes.

This is a porofessional Size - 142gr tubes x 2 (10OZ total)

J-B weld is a must have in anyone’s tool box and has been proven to be the de-facto in cold soldering in many R/C hobbies including Radio Controlled Hobbies

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. J-B Weld will form a permanent bond that once cured can be shaped, tapped, filed, sanded and drilled. At room temperature J-B Weld will set in 20-25 minutes to a dark grey color. A full cure is reached in under 24 hours.

J-B Weld can withstand temperatures up to 287ºC (550ºF) once fully cured.

We recommending to use this glue on clutches, metal (mufflers and engine parts) and much more.

Great for the following applications:

•     Household Repairs
•     Automotive
•     Plumbing
•     Marine
•     Hobby Crafts & More

Product Specification:

•     Strength: 5020 PSI
•     Set Time: 20-25 Minutes
•     Cure Time: 15-24 Hours
•     Cure Colour: Dark Grey