Iflight RC fpv

Page of 2
5.8G Mushroom Antenna Protective Jacket Cover for Mushroom Antenna

5.8G Mushroom Antenna Protective Jacket Cover for Mushroom Antenna

5.8G Mushroom Antenna Protective Jacket Cover for Mushroom Antenna

Choice of standard or Fatshark antenna fit

Red color

1 PCS in bag

select Normal or Fatshark antenna

€2.40


€1.98 Ex VAT
Quantity
Custom assembled TITAN DC5 HD v1.4 Compatible with DJI Air Unit PNP

Custom assembled TITAN DC5 HD v1.4 Compatible with DJI Air Unit PNP

TITAN DC5 w/ DJI Air Unit BNF built for  the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This TITAN DC5 BNF is 5 inch quad which is no prop in view, equipped SucceX-D F7(50A 4-in-1 ESC) Stack and popular XING motor, everything you just need to bind and fly!

This model can accept up to 6s, but the motors mounted are designed to be used with 4S.

    You can use Any radio you want, you will need to add your receiver and bind and calibrate it.

    If you use your own DJI Remote Controller, you need to update beta-flight to 10.6.0 to set up and bind your DJI remote controller.

    ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC):

    • Universal USB Type C connector instead of micro USB
    • Plug-and-Play. No need to solder tiny wires
    • Designed to support DJI Digital FPV.

    BNF // Parts lists

    • 1x TITAN DC5 HD Frame
    • 2x TPU camera side plate soft mount
    • 1x iFlight Lipo Strap
    • 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
    • 4x XING 2207 Motor Unibell (4S 2450KV)
    • 1x SucceX- F7 Flight Controller
    • 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S

    €330.00


    €272.73 Ex VAT
    Quantity
    F4 F405 Flight Control 3-6S & 60A 4IN1 ESC Stack For FPV Frame Drone

    F4 F405 Flight Control 3-6S & 60A 4IN1 ESC Stack For FPV Frame Drone

    F4 F405 Flight Control 3-6S & 60A 4IN1 ESC Stack For FPV Frame Drone

    Product Parameters:


    MCU: STM32F405RGT6 168MHz
    Gyroscope: Mpu6500
    Baro:Bmp280
    OSD: Betaflight SPI OSD DJI HD OSD(UART5)
    Black box: 16MB
    6x Uarts: UART 1/2/3/4/5/6
    4x PWM outputs
    1x I2C
    2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)
    USB Type-C(USB2.0)
    1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)
    1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)
    VTX 9V filtered power
    DJI FPV OSD is supported by any spare UART
    LED: 4 LED independent pads, support WS2812 programming lamp output.
    Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
    The default receiver input is UART2(You can solder ELRS RX on UART2).

    Power:
     Input voltage: 3-6S
    BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
    LDO 3.3V: Max.1A
    FC Firmware
    :  BetaFlight firmware: DAKEFPVF405
    INAV firmware:DAKEFPVF405

    Mounting:
    Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
    External size 36mm × 36mm
    Flight control weight: 6.9g
    Flight control onboard voltage sensor.

    60A BLHeli-S 3-6S DShot600 4-in-1 ESC:

    Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
    Power supply voltage: 3-6S (12-26V)
    Continuous working current: 45A/60A
    No built-in 5V BEC output
    Firmware: BLHeli-S
    Screw hole spacing: 30.5*30.5MM
    Aperture: 4MM
    Weight: 14.6g

    - The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.

    - EMI Shell provides stronger anti-interference capability.

    Note: There is no difference in appearance between the 45A and 60A ESCs, which can be distinguished from the MOS tube.

    €79.00


    €65.29 Ex VAT
    Quantity
    F7 F722 Flight Controller 3-6S & 60A 4IN1 ESC Stack For FPV Frame Drone

    F7 F722 Flight Controller 3-6S & 60A 4IN1 ESC Stack For FPV Frame Drone

    F7 F722 Flight Controller 3-6S & 60A 4IN1 ESC Stack For FPV Frame Drone

    Product Parameters:


    Name: F7 F722 flight controller
    Main control chip: STM32F722RET6
    MPU: MPU6500
    Character overlay: AT7456E
    Black box: integrated 16M Flash
    Barometer: BMP280
    Serial port: 6 optional
    Motor output: 6 channels optional
    LED strip: support
    Buzzer: support
    Camera_Control:support
    Input voltage: 3-6S Lipo
    Power output: 5V/2A, 9V/2A
    Weight: 6.0g
    Size: 36x36mm, mounting hole 30.5mm
    Firmware: DAKEFPVF722

    Power:
     Input voltage: 3-6S
    BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
    LDO 3.3V: Max.1A


    Mounting:
    Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
    External size 36mm × 36mm
    Flight control weight: 6.9g
    Flight control onboard voltage sensor.

    60A BLHeli-S 3-6S DShot600 4-in-1 ESC:

    Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
    Power supply voltage: 3-6S (12-26V)
    Continuous working current: 45A/60A
    No built-in 5V BEC output
    Firmware: BLHeli-S
    Screw hole spacing: 30.5*30.5MM
    Aperture: 4MM
    Weight: 14.6g

    - The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.

    - EMI Shell provides stronger anti-interference capability.

    Note: There is no difference in appearance between the 45A and 60A ESCs, which can be distinguished from the MOS tube.

    €89.00


    €73.55 Ex VAT
    Quantity
    KingKong / LDARC TINY 7 75mm Micro FPV Quadcopter F3 FM800 FASST Futaba compatible

    KingKong / LDARC TINY 7 75mm Micro FPV Quadcopter F3 FM800 FASST Futaba compatible

    KINGKONG/LDARC TINY7 75mm Micro FPV Quadcopter With 720 Brushed Motors Baced on F3 Brush Flight Controller

    Description:

    • Brand:KINGKONG
    • Item NO:TINY7
    • Battery Power:3.7V  450mAh 80C (NOT INCLUDED)
    • Wheelbase:75mm
    • Propeller size:40mm
    • (FC): Micro F3(Betaflight): click here
    • VTX: 25mW/16CH
    • Camera:800TVL/150°
    • Frame:ABS high-quality
    • Motor:720 Brushed
    • Charger:200mah/500mah
    • Basic version:Switchable 1s One -way Charger USB Powered
    • Advanced vesion:Switchable 1s Five -way Charger USB or 2~6s  Lipo Powered
    • Weight: 31.3g (without Receiver and Battery)

    Receiver:

    • FM800 (Futaba Fasst)

     Note :the Battery upgrade power is 3.7V 450mAh 80C
     
    Package included:

    Basic version:

    • 1x 75mm Frame
    • 2x 40mm Propellers
    • 1x Cover
    • 1x FC+VTX+Brushed+ESC+AIO PCB
    • 1x 800TVL 150° camera
    • 1x 1s One -way Charger USB Powered
    • 4x 720 Brushed motors

    €129.00


    €106.61 Ex VAT
    Quantity
    KingKong / LDARC TINY 7 75mm Micro FPV Quadcopter F3 No receiver

    KingKong / LDARC TINY 7 75mm Micro FPV Quadcopter F3 No receiver

    KINGKONG/LDARC TINY7 75mm Micro FPV Quadcopter With 720 Brushed Motors Baced on F3 Brush Flight Controller

    Description:

    • Brand:KINGKONG
    • Item NO:TINY7
    • Battery Power:3.7V  450mAh 80C (NOT INCLUDED)
    • Wheelbase:75mm
    • Propeller size:40mm
    • (FC): Micro F3(Betaflight): click here
    • VTX: 25mW/16CH
    • Camera:800TVL/150°
    • Frame:ABS high-quality
    • Motor:720 Brushed
    • Charger:200mah/500mah
    • Basic version:Switchable 1s One -way Charger USB Powered
    • Advanced vesion:Switchable 1s Five -way Charger USB or 2~6s  Lipo Powered
    • Weight: 31.3g (without Receiver and Battery)

    Receiver:

    • No receiver included

     Note :the Battery upgrade power is 3.7V 450mAh 80C
     
    Package included:

    Basic version:

    • 1x 75mm Frame
    • 4x 40mm Propellers
    • 1x Cover
    • 1x FC+VTX+Brushed+ESC+AIO PCB
    • 1x 800TVL 150° camera
    • 1x 1s One -way Charger USB Powered
    • 4x 720 Brushed motors

    €110.00


    €90.91 Ex VAT
    Quantity
    KingKong / LDARC TINY6 Advanced 65mm Micro FPV Quadcopter

    KingKong / LDARC TINY6 Advanced 65mm Micro FPV Quadcopter

    KINGKONG/LDARC TINY6 Advanced 65mm Micro FPV Quadcopterr With 615 Brushed Motors Based on F3 Brush Flight Controller

    Description:

    • Brand:KINGKONG
    • Item:TINY6
    • Battery Power:3.7V 250mAh 30C (NOT INCLUDED)
    • Wheelbase:65mm
    • Propeller size:31mm
    • (FC): Micro F3 (Betaflight)
    • VTX:25mW/16CH
    • Camera:800TVL/150°
    • Frame:ABS high-quality
    • Motor:615 Brushed
    • Charger:200mah/500mah
    • Basic version:Switchable 1s One -way Charger USB Powered
    • Advanced vesion:Switchable 1s Five -way Charger USB or 2~6s  Lipo Powered
    • Weight: 19.2g (without Receiver and Battery)

    Receiver:

    • No receiver

     
    Package included:

     Advanced vesion:

    • 1x 65mm Frame
    • 16x 31mm Propellers(4* red, 4 *white, 4*pink ,4*yellow)
    • 4x Cover(1*red, 1*white, 1*pink ,1*yellow)
    • 1x FC+VTX+Brushed+ESC+AIO PCB
    • 1x 800TVL 150° camera
    • 1x 1s Five -way Charger USB or 2~6s  Lipo Powered
    • 4x 615 Brushed motor
    • 1x spanner

    €95.00


    €78.51 Ex VAT
    Quantity
    KINGKONG 1.9" Propeller Prop Guard Protector Bumper Set

    KINGKONG 1.9" Propeller Prop Guard Protector Bumper Set

    KINGKONG 1.9" Propeller Prop Guard Protector Bumper Black All Surround for 1103-7800kv Motor FPV Racing Quadcopter

    Content:

    • White Propellers (2 pairs)
    • Yellow Propellers (2 pairs)
    • 4 x Black Propeller Guard
    • M2x6 Props Fixing Screw (8 pcs)
    • M2x7 Round Head Screw (16 pcs)

     

     

    €14.90


    €12.31 Ex VAT
    Quantity
    Kingkong 100mm Indoor FPV N32 Quadcopter 25MW Camera PNP no RX

    Kingkong 100mm Indoor FPV N32 Quadcopter 25MW Camera PNP no RX

    A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

    • Wheel base: 100mm
    • Weight: 55g ( Without RX battery )
    • Flight controller: NAZE32 Brush
    • Motor: 8520 Brushed Motor
    • Propeller Size : 65mm
    • Camera : 600TVL HD CMOS 1/4 inch Camera
    • VTX: 5.8G 25mw 16ch
    • Battery : 3.7v 550mAh 25C Lipo battery
    • Flight time : 5-7 minutes
    • RX Type : Not included

    €89.90


    €74.30 Ex VAT
    Quantity
    Kingkong 100mm Indoor FPV N32 Quadcopter 25MW Camera PNP no RX

    Kingkong 100mm Indoor FPV N32 Quadcopter 25MW Camera PNP no RX

    A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

    • Wheel base: 100mm
    • Weight: 55g ( Without RX battery )
    • Flight controller: NAZE32 Brush
    • Motor: 8520 Brushed Motor
    • Propeller Size : 65mm
    • Camera : 600TVL HD CMOS 1/4 inch Camera
    • VTX: 5.8G 25mw 16ch
    • Battery : 3.7v 550mAh 25C Lipo battery
    • Flight time : 5-7 minutes
    • RX Type : Not included

    €89.90


    €74.30 Ex VAT
    Quantity
    KingKong 110GT 117mm Brushless Mini FPV Racing Drone Yellow & White

    KingKong 110GT 117mm Brushless Mini FPV Racing Drone Yellow & White

    KingKong 110GT 117mm Brushless Mini FPV Racing Drone Yellow & White

    KINGKONG/LDARC 110GT KIT 117mm Carbon Fiber Frame Kit with 4 Pairs 2840 Props 2.8inch Propeller Guard

    Features:

    • Micro F3 6DOF flight controller with 32-bit STM32F303CC processor and MPU6050
    • Furious flying speed 1105 8500KV brushless motors, high PRM
    • Powered by 350mAh 2S 7.4V 25C lithium-ion battery (NOT INCLUDED-
    • 800TVL HD FPV camera, 150-degree FOV, 5.8G 16CH 25mW video transmitter
    • 117mm wheelbase, as big as your palm; Approx 63.7g, extremely light

    Specification:

    • Brand Name: KingKong
    • Item Name: Kingkong 110GT 117mm Mini FPV Racing Drone
    • Model: 110GT
    • Version: PNP, no rx
    • Wheelbase: 117 mm
    • Dimension: 166*126.4*60.8 mm
    • Weight: Approx 63.7g (without battery)
    • Battery: 7.4V (2 Cells) 350mAh 35C

    Package Included:

    ARF Version

    • 1 x KingKong 110GT Drone
    • 1 x Spare Fuselage (Canopy)
    • 1 x Propeller Guard
    • 4 x Pair 2840 Prop
    • 1 x USB Cable
    • No Receiver

    €119.90


    €99.09 Ex VAT
    Quantity
    KINGKONG 2.3" Propeller Prop Guard Protector Bumper Set

    KINGKONG 2.3" Propeller Prop Guard Protector Bumper Set

    KINGKONG 2.3" Propeller Prop Guard Protector Bumper Black All Surround for 1103 1104 Motor FPV Racing Quadcopter

    Content:

    • White Propellers (2 pairs)
    • Yellow Propellers (2 pairs)
    • 4 x Black Propeller Guard
    • M2x6 Props Fixing Screw (8 pcs)
    • M2x7 Round Head Screw (16 pcs)

     

     

    €15.90


    €13.14 Ex VAT
    Quantity
    KINGKONG 2.8" Propeller Prop Guard Protector Bumper Set

    KINGKONG 2.8" Propeller Prop Guard Protector Bumper Set

    KINGKONG 2.8" Propeller Prop Guard Protector Bumper Black All Surround for 1104-7500 kv Motor FPV Racing Quadcopter

    Content:

    • White Propellers (2 pairs)
    • Yellow Propellers (2 pairs)
    • 4 x Black Propeller Guard
    • M2x8 Props Fixing Screw (8 pcs)
    • M2x7 Round Head Screw (16 pcs)

     

     

    €16.90


    €13.97 Ex VAT
    Quantity
    KingKong 210 Sandwich Frame kit

    KingKong 210 Sandwich Frame kit

    KingKong 210 Sandwich Frame kit

    Specification:

    • Model: 210 Sandwich Frame
    • Size: 210mm
    • Material: Carbon Fiber + Plastic
    • Weight:  149 grams
    • Arm Plate: 3mm
    • PCB: Integrated

    Recommended set-up for KingKong 210 sandwich frame

    • Flight Controller: SP Racing Naze32 Mini | mini F3 Acro
    • ESC: KingKong BLHeli 12A w/ OneShot | FVT LittleBee 20A micro w/ OneShot
    • Motor: 1806 3100kV Brushless
    • Battery: 11.1v 3S 850mAh Lipo Battery /r 4s 850 mAh 70c
    • Camera: 700tvl / 1000tvl
    • VTX: 5.8

    €59.00


    €48.76 Ex VAT
    Quantity
    KINGKONG 210GT Multicopter FPV Racer Drone PNP Combo with NZ32 Flight Control

    KINGKONG 210GT Multicopter FPV Racer Drone PNP Combo with NZ32 Flight Control

    KINGKONG 210GT Multicopter FPV Racer Drone PNP Combo with NZ32 Flight Control,

    This PNP combo is equipped with naze32 flight control, 4 2205(2-4S) motors, 4 BLHELI ESC 20A(2-4S) , 10pairs of 5040 propellers, video transmitter, mushroom antenna, CCD camera.

    The frame is 3mm full carbon fiber integrated design with light weight and very good strength.

    Package Included:
    1 x 210MM Frame Kit
    4 x 2300KV Motor
    4 x 20A ESC
    20 x 5040 Propeller
    1 x 5.8G VTX
    1 x 700TVL CCD Camera
    1 x SMA RHCP 5.8G Antenna

    Radio and Lipo not included

    €299.00


    €247.11 Ex VAT
    Quantity
    Kingkong 65mm BLACK Propeller (10 CW & 10 CCW) for 720 8520 Coreless Motor

    Kingkong 65mm BLACK Propeller (10 CW & 10 CCW) for 720 8520 Coreless Motor

    Kingkong 65mm BLACK Propeller (10 CW & 10 CCW) for 720 8520 Coreless Motor

    Description:

    • Brand Name: Kingkong
    • Item Name: Propeller Prop
    • Diameter: 65mm
    • Centen hole diameter:1mm
    • Meterial: ABS
    • Color: Red,Black (Optional)
    • Quantity: 10 Pairs, a total of 20 Pcs blades, 10CW and 10 CCW
    • Weight: 0.4g/pcs
    • Usage: suitable for 90mm-150mm DIY Micro Quadcopter Frame Kits
    • For 1mm shaft diameter Coreless motor 7*16mm, 7*20mm, 8.5*20mm      

     
    Package Included:

    • 10 x CW Propeller Prop
    • 10 x CCW Propeller Prop

     

    €6.90


    €5.70 Ex VAT
    Quantity
    Kingkong 65mm RED Propeller (10 CW & 10 CCW) for 720 8520 Coreless Motor

    Kingkong 65mm RED Propeller (10 CW & 10 CCW) for 720 8520 Coreless Motor

    Kingkong 65mm RED Propeller (10 CW & 10 CCW) for 720 8520 Coreless Motor

    Description:

    • Brand Name: Kingkong
    • Item Name: Propeller Prop
    • Diameter: 65mm
    • Centen hole diameter:1mm
    • Meterial: ABS
    • Color: Red,Black (Optional)
    • Quantity: 10 Pairs, a total of 20 Pcs blades, 10CW and 10 CCW
    • Weight: 0.4g/pcs
    • Usage: suitable for 90mm-150mm DIY Micro Quadcopter Frame Kits
    • For 1mm shaft diameter Coreless motor 7*16mm, 7*20mm, 8.5*20mm      

     
    Package Included:

    • 10 x CW Propeller Prop
    • 10 x CCW Propeller Prop

     

    €6.90


    €5.70 Ex VAT
    Quantity
    KingKong 95GT 95mm Micro FPV Racing Drone Yellow & White canopies

    KingKong 95GT 95mm Micro FPV Racing Drone Yellow & White canopies

    KingKong 95GT 95mm Micro FPV Racing Drone Yellow & White canopies

    5.8G 800TVL CMOS / Micro F3 Flight Controller / 4-in-1 BLHeli - S 10A DShot ESC

    • KingKong 95GT 95mm mini FPV racing drone uses the more powerful 1103 7800KV brushless motors, the superior 4-in-1 BLHeli - S 10A DShot ESC, and the 35C high discharge rate LiPo battery.
    • KingKong 95GT allows you to fly swiftly and steadily both indoors and outdoors; enjoy the fascinating panoramic view with the 800TVL HD CMOS camera.
    • Put the impact-resistant canopy backward, and you will be able to update / maintain the components inside.

    Main Features:

    • Micro F3 6DOF flight controller with 32-bit STM32F303 MCU and MPU6050
    • 4-in-1 BLHeli - S 10A ESC supports the latest DShot digital signals etc.
    • Furious flying speed - 1103 7800KV high PRM brushless motors and 35C LiPo
    • 800TVL HD FPV camera, 150-degree FOV, 5.8G 16CH 25mW video transmitter

    Specifications:

    • Wheelbase: 95mm
    • Weight: 50.2g ( not including battery )
    • Material: carbon fiber chassis + ABS canopy
    • Chassis thickness: 2mm
    • Brushless motor: 1103 7800KV
    • ESC: 4-in-1 BLHeli - S 10A
    • Flight controller: micro F3 6DOF
    • Propeller: 1935 three-blade
    • Camera: 800TVL CMOS
    • Field of view: 150 degree
    • Battery: 7.4V 350mAh 35C LiPo ( NOT INCLUDED )

    No receiver included 

    €109.90


    €90.83 Ex VAT
    Quantity
    KINGKONG Brushless Motor GT1105 7000KV for Mini Class 130 RC Drone

    KINGKONG Brushless Motor GT1105 7000KV for Mini Class 130 RC Drone

    KINGKONG Brushless Motor GT1105 7000KV for Mini Class 130 RC Drone

    €8.90


    €7.36 Ex VAT
    Quantity
    Kingkong FLY EGG 100 Racing Drone KIT

    Kingkong FLY EGG 100 Racing Drone KIT

    Kingkong FLY EGG 100 Racing Drone Spare Parts

    Specification:

    • Brand name: Kingkong
    • Item name: FLY EGG 100
    • Material: carbon fiber
    • Weight: 8.5g
    • Usage: for Kingkong FLY EGG 100  racing drone

    Package included:

    • 1 x FLY EGG 130 / 100 bottom plate
    • 1 x camera fixing plate
    • 1 x LED
    • 1 x cable

     

    €28.00


    €23.14 Ex VAT
    Quantity
    Kingkong FLY EGG 130 Racing Drone KIT

    Kingkong FLY EGG 130 Racing Drone KIT

    Kingkong FLY EGG 130 Racing Drone Spare Parts

    Specification:

    • Brand name: Kingkong
    • Item name: FLY EGG 130
    • Material: carbon fiber
    • Weight: 10.6g
    • Usage: for Kingkong FLY EGG 130 racing drone

    Package included:

    • 1 x FLY EGG 130 / 100 bottom plate
    • 1 x camera fixing plate
    • 1 x LED
    • 1 x cable

     

    €28.00


    €23.14 Ex VAT
    Quantity
    Kingkong FLY EGG Alu frame

    Kingkong FLY EGG Alu frame

    Kingkong FLY EGG Alu frame

    €12.90


    €10.66 Ex VAT
    Quantity
    KingKong LDARC 1935 1.9X3.5 CW CCW 3-blade Prop (8 Pairs) Red

    KingKong LDARC 1935 1.9X3.5 CW CCW 3-blade Prop (8 Pairs) Red

    KingKong LDARC 1935 1.9X3.5 CW CCW 3-blade Propeller 1.5mm Mounting Hole (8 Pairs), Color-red

    Specification:

    • Item name: 1935 3-blade propeller
    • Weight: 0.70g/pcs
    • Material: PC
    • Package weight: 22.4g
    • Size: 1935 1.9X3.5
    • Package size: 145*90*25mm
    • Mouting hole: 1.5mm
    • Mounting hole size: 5mm
    • Hub thickness: 6.42mm
    • Color: white, pink, green, yellow, red (option)
    • Recommended mounting screws: M2*6

    Package included:

    • 8 x 1935 CW 3-blade propeller
    • 8 x 1935 CCW 3-blade propeller
    • screws

    €6.90


    €5.70 Ex VAT
    Quantity
    KingKong LDARC 2345 2.3X4.5 CW CCW 3-blade Prop (10 Pairs)

    KingKong LDARC 2345 2.3X4.5 CW CCW 3-blade Prop (10 Pairs)

    KingKong LDARC 2345 2.3X4.5 CW CCW 3-blade Propeller 1.5mm Mounting Hole (10 Pairs)

    Specification:

    • Brand name: KINGKONG/LDARC
    • Item name: 2345 3-blade propeller
    • Weight: 1.40g/pcs
    • Material: PC
    • Package weight: 36g
    • Size: 2345 2.3X4.5
    • Package size: 145*90*25mm
    • Mouting hole: 1.5mm
    • Mounting hole size: 5mm
    • Hub thickness: 6.42mm
    • Color: white, pink, green, yellow, red (option)
    • Recommended mounting screws: M2*8

    Package included:

    • 10 x 2345 CW 3-blade propeller
    • 10 x 2345 CCW 3-blade propeller

    €6.90


    €5.70 Ex VAT
    Quantity
    KingKong LDARC 2840 2.8X4 CW CCW 3-blade prop (10 Pairs)

    KingKong LDARC 2840 2.8X4 CW CCW 3-blade prop (10 Pairs)

    KingKong LDARC 2840 2.8X4 CW CCW 3-blade Propeller 1.5mm Mounting Hole (10 Pairs)

    Specification:

    • Brand name: KINGKONG/LDARC
    • Item name: 2840 3-blade propeller
    • Weight: 1.4g/pcs
    • Material: PC
    • Package weight: 35.4g
    • Size: 2840 2.8x4
    • Package size: 145*90*40mm
    • Mouting hole: 1.5mm
    • Mounting hole size: 5mm
    • Hub thickness: 6.42mm
    • Color: white, pink, green, yellow, red (option)
    • Recommended mounting screws: M2*8

    Package included:

    • 10* 2840 CW 3-blade propeller
    • 10* 2840 CCW 3-blade propeller

     green color

    €6.90


    €5.70 Ex VAT
    Quantity
    Kingkong Q100 100mm Frame Kit Support 8520 Coreless Motor

    Kingkong Q100 100mm Frame Kit Support 8520 Coreless Motor

    Kingkong Q100 100mm Frame Kit Support 8520 Coreless Motor

    Description:

    • Item NO.: Kingkong Q100
    • Item name: DIY Micro Quadcopter Frame Kit
    • Material: Plastic
    • Wheelbase: 100mm
    • Thickness: 3mm
    • Motor diameter: 8.5mm
    • Prop Size: 65mm
    • Color: White, Yellow, Red (Optional)
    • Bare weight: 11.6g
    • Size: L83mm x W83mm x H35mm

    Package included:

    • 1 x Q100 Frame Kit, no electronics

    €12.00


    €9.92 Ex VAT
    Quantity
    Kingkong Q100 100mm Frame Kit Support 8520 Coreless Motor

    Kingkong Q100 100mm Frame Kit Support 8520 Coreless Motor

    Kingkong Q100 100mm Frame Kit Support 8520 Coreless Motor

    Description:

    • Item NO.: Kingkong Q100
    • Item name: DIY Micro Quadcopter Frame Kit
    • Material: Plastic
    • Wheelbase: 100mm
    • Thickness: 3mm
    • Motor diameter: 8.5mm
    • Prop Size: 65mm
    • Color: White, Yellow, Red (Optional)
    • Bare weight: 11.6g
    • Size: L83mm x W83mm x H35mm

    Package included:

    • 1 x Q100 Frame Kit

    €7.90


    €6.53 Ex VAT
    Quantity
    Kingkong Q100 100mm Micro FPV Racing Quadcopter Base On NZ32 Flight Controller Futaba Receiver RED

    Kingkong Q100 100mm Micro FPV Racing Quadcopter Base On NZ32 Flight Controller Futaba Receiver RED

    A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

    Package included:
    1 x Q100 Frame kit
    1 x N32 Brush Flight controller
    1 x 600TVL Camera
    4 x 8520 Coreless Motor
    20 x Blade

      Specification:
      Brand Name: Kingkong
      Item NO.: Q100
      Wheelbase: 100mm
      Weight: 41.8g (Without RX and battery)
      Size: 85*85*25mm
      Color: Yellow
      Flight controller: N32 Brush
      Firmware version: Cleanflight 1.13.0 ALIENFLIGHTF1
      Motor: 8520 Brush Motor
      Prop Size: 65mm
      Camera: 600TVL HD CMOS 1/4 inch Camera
      AV Wireless Transmitter: 5.8g 25mw 16ch
      Batterry: 3.7V 550mAh 25C Lipo battery
      Flight time: 5-7 minutes

    €119.00


    €98.35 Ex VAT
    Quantity
    Kingkong Q100 100mm Micro FPV Racing Quadcopter Base On NZ32 Flight Controller Futaba Receiver Yellow

    Kingkong Q100 100mm Micro FPV Racing Quadcopter Base On NZ32 Flight Controller Futaba Receiver Yellow

    A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

    Package included:
    1 x Q100 Frame kit
    1 x N32 Brush Flight controller
    1 x 600TVL Camera
    4 x 8520 Coreless Motor
    20 x Blade

    Brand Name: Kingkong

      Item NO.: Q100
      Wheelbase: 100mm
      Weight: 41.8g (Without RX and battery)
      Size: 85*85*25mm
      Color: Yellow
      Flight controller: N32 Brush
      Firmware version: Cleanflight 1.13.0 ALIENFLIGHTF1
      Motor: 8520 Brush Motor
      Prop Size: 65mm
      Camera: 600TVL HD CMOS 1/4 inch Camera
      AV Wireless Transmitter: 5.8g 25mw 16ch
      Batterry: 3.7V 550mAh 25C Lipo battery
      Flight time: 5-7 minutes

    €119.00


    €98.35 Ex VAT
    Quantity
    KingKong Quadcopter Spare Parts USB Charger 1s

    KingKong Quadcopter Spare Parts USB Charger 1s

    KingKong Quadcopter Spare Parts USB Charger 1s

    €3.90


    €3.22 Ex VAT
    Quantity
    Kingkong Smart 90mm Assembled Micro FPV Racing Quad (No RX)

    Kingkong Smart 90mm Assembled Micro FPV Racing Quad (No RX)

    Kingkong Smart 90mm Assembled Micro FPV Racing Quad (No RX)

    The Kingkong Smart 90mm Full Carbon Fiber PNP Frame Kit with Naze32 8520 25mW FPV AIO CAM TX 3.7V 550mAh has a lot of amazing features that FPV pilots and aerial photographers would love.
    It features a Naze32 Brush flight control flashed with Cleanflight 1.13.0 ALIENFLIGHTF1. The FPV camera captures crisp, clear flight footages while 5.8G 25mW 16CH AV transmitter shares the images to the ground in real time.
    8520 brush motor provides constant high power to drive the propellers to ensure a stable flight every time.
    Built-in 550mAh battery provides up to 7 minutes of long flight.
    What's more, it has a tough yet light full carbon fiber construction to resist shock and impact.

    Features:

    • Naze32 Brush flight control flashed with Cleanflight 1.13.0 ALIENFLIGHTF1
    • FPV camera captures crisp, clear flight footages
    • 5.8G 25mW 16CH AV transmitter shares the images to the ground in real time
    • 8520 brush motor provides constant high power to ensure a stable flight every time
    • Built-in 550mAh battery provides up to 7 minutes of long flight
    • Full carbon fiber construction to resist shock and impact while maintaining lightweight
    • Receiver not included

    Specifications:

    • Brand: Kingkong
    • Model: Smart 90
    • Wheelbase: 90mm
    • Flight Controller: Naze32 Brush
    • Firmware Version: Cleanflight 1.13.0 ALIENFLIGHTF1
    • Motor: 8520 Brush Motor
    • Prop Size: 56mm
    • Receiver: No
    • Camera: 600TVL 150° HD CMOS 1/4 inch Camera
    • AV Wireless Transmitter: 5.8G 25mW 16CH
    • Battery: 3.7V 550mAh 25C Lipo Battery
    • Flight Time: 5-7 minutes
    • Material: Carbon Fiber
    • Dimensions: (8.5 x 8.5 x 2.5)cm (L x W x H)
    • Weight: 41g

    Package Includes:

    • 1 x Smart 90 Carbon Fiber Frame Kit
    • 1 x N32 Brush Flight Controller
    • 1 x 600TVL Camera
    • 4 x 8520 Coreless Motors
    • 24 x Blades
    • 1 x 3.7V 550mAh Lipo Battery
    • 1 x Prop protection

    €89.00


    €73.55 Ex VAT
    Quantity
    Lipo Balancer JST-XH CLIP protector Plug 3-4-6s, set of 5

    Lipo Balancer JST-XH CLIP protector Plug 3-4-6s, set of 5

    This clip is designed to proctect the JST-XH type balance connector of your battery from damages, and for easy and quick connection and disconnection. JST-XH connector is the most popular balance lead in the RC field.

    Every pack contains five clips of same size (not as on the photos)

    Features:

    • Made of storng, non-toxic polypropylene (PP).
    • Precision casting.
    • Grained and curved surfaces for easy handling.
    • Light weight:  3S-1.4g, 4S-1.6g, 6S-2g.
    • Compatible with JST-XH balance connectors

    €2.00


    €1.65 Ex VAT
    Quantity
    MOTOR XING CAMO X2208 FPV NextGen Motor uNIBELL 1700kv 6S

    MOTOR XING CAMO X2208 FPV NextGen Motor uNIBELL 1700kv 6S

    iFlight XING CAMO Series Motors has always been one of the most popular motors on the market, and we redesigned the XING motors with nextgen coating technology. The appearance of new XING Camouflage series motors has been enhanced to make them more attractive based on their aggressive performance. There're 2207, 2208,2210, 2306 sizes in the Camouflage XING series for choice. we offer 1700KV for choices to meet different pilots' needs, just like the previous XING series motors.

    The iFlight XING series motor is designed and named by FPV pilot & specialist Patrick Xing. Combining IFlight's high-quality motor production technology with Patrick Xing's technical expertise, a top-of-the-line motor has been produced. iFlight XING provides the most incredible power and thrust in the lightest weight. The elliptical body, powerful stator with N52H magnets and very small air gap makes iFlight XING series motor incredible new style motors.

    The iFlight XING series motor is characterized by support 6S. The 4mm Titanium alloy shaft and high-quality N52H magnets surrounded by high-temperature resistant windings. It means that the iFlight XING series motor can be pushed to the limit. The sturdy structure and high-quality materials make iFlight XING performs like a beast.

    There's non-slip design on the contact surface between iFlight XING motor and propellers to increase the friction and to improve durability; Multi-heat dissipation hole design, helps to pull heat away continuously; Standard M3 16mm*16mm mounting pattern at the bottom, is compatible with all frames on market; Motor cable length 160mm can meet different requirements whether connecting single or 4 in 1 ESC; Each motor has been dynamic balanced, all of them have passed the highest standard iFlight manufacturing and assembling procedure.

    Features:

    Unibell design

    New technology coating elliptical body

    High-strength 4mm Titanium alloy shaft

    Large heat dissipation holes design (15℃ lower compared to same size motor)

    Crush resistant damping bearing, eliminate vibration effectively

    50%-80% optimal throttle output, best efficiency

    160mm cable length for different frames and setups

    CNC high-precision machining 7075 aluminum Bell and Base

    220℃ Pacific heat-resistant copper wire & solid winding

    Electromagnetically matched magnets and stator

    Japanese Kawasaki 1200 Iron Core

    N52H High-temperature magnets, NSK bearings

    Motor wires protected

    Hex bolt shaft set screw

    Dynamically balanced

    30.6g with a short wire

    Package included:

    • XING CAMO 2208 Motor (unibell) 1pc 1700KV, FOR 6S
    • Hardware set 1 bag

    €26.90


    €22.23 Ex VAT
    Quantity
    RACE 230 FPV Drone KIT frame Version

    RACE 230 FPV Drone KIT frame Version

    RACE 230 FPV Drone KIT frame Version

    Package included

    • KingKong RACE 230 FPV Drone FRAME kit
    • 2 Set of props
    • Camera Mount
    • PCB

    €69.00


    €57.02 Ex VAT
    Quantity
    RAMMUS 180 FPV Racer Advanced Electronics Combo F3 controller

    RAMMUS 180 FPV Racer Advanced Electronics Combo F3 controller

    RAMMUS 180 FPV Racer Advanced Electronics Combo F3 controller

    Including all electronics combo, see options.

    Included in the package

    • RAMMUS 180 kit    
    • 6x Canopy(6 different colors )
    • 4*4.5X3 props
    • 2205-2300KVCW  *2   
    • 2205-2300KVCCW  *2
    • F3 PLUS flight controller *1   
    • Little Bee 20A ESC *4
    • Mushroom antenna
    • 5 v&12v PDB  *1
    • Sony 700 tvl Cam  *1
    • 40ch VTX

    Need to complete

    Lipo, Radio

     

     

     

    €289.00


    €238.84 Ex VAT
    Quantity
    RAMMUS 180 FPV Racer Kit only

    RAMMUS 180 FPV Racer Kit only

    RAMMUS 180 FPV Racer Advanced Electronics Combo F3 controller

    Included in the package

    • RAMMUS 180 kit    
    • 6x Canopy(6 different colors )
    • 4*4.5X3 props

    Need to complete

    Lipo, Radio, electronics

     

     

     

    €69.00


    €57.02 Ex VAT
    Quantity
    Page of 2