Hobbywing

Hobbywing 2388 CW or CCW Propeller set, No HUB included

Hobbywing Brushless RPM Sensor For High-Voltage ESC / V Bar HM-CGQ

1000rpm to 300000rpm RPM Sensor For Hobbywing High-Voltage ESC also used as an RPM sensor for Flybarless units

RPM Sensor For Hobbywing High-Voltage ESC

Function:

It detects the voltage changes at the wires of brushless motor, and then outputs the RPM signal. This RPM sensor can work with some speed control systems for helicopters. And one of its typical applications is to work as the RPM sensor for V-Bar system made by Mikado.

Specifications:

• Size: 23mm(L)*10mm(w)*2mm(H)
• Weight: 6g (Input and output wires are included)
• Working voltage: 3.5V to 8.4V(1S to 2S Lipo)
• Current: 1 to 5mA
• Voltage range of the motor wires: 2 to 14S Lipo
• RPM range (for 2 poles brushless motor): 1000rpm to 300000rpm
• Working temperature: 0 to 50 Celsius degree or 32 to 122 Fahrenheit degree

Hobbywing Combo Ezrun MAX10SCT + 3660SL 4000 KV  

Applicable to:

• 1/10th SCT/truck/monster truck high-end entertainment.

EZRUN MAX10-SCT

• Product Number: 30102601
• Current: 120A
• Input Voltage: 2-4S LiPo/6-12 Cell NiMH
• Best Combination: EzRun 3660
• Applications: 1/10th SCTs/Truck/Monster Truck
• Waterproof

EZRUN-3660SL-D5-G2 4000KV

• Product Number: 30402652
• Applications: 1/10th Short-course Truck/Truck/Monster truck(4WD)
• Axle: 5mm
• Diam: 36mm
• Length: 60mm
• Cell Count: 2-3S

This is a brand new set, but not in original box. never operated

The new HobbyWing XERUN AX Sensored Crawler ESC has features not seen before on an ESC for crawlers. With features such as the new FOC technology, professional drag brake, innovative sensor port and Bluetooth connectivity. Field-Oriented Control (FOC) is the name of the new sensor technology that ensures precise control and detection of the motor. The ESC can tune the engine speed based on the amount of throttle being applied. The controller is very easy to program by means of the built-in Bluetooth function.

Included:

Motor AXE550 3300KV

ESC XERUN R2 60/360A

HOBBYWING FLYFUN 130A HV OPTO V5 SPEED CONTROL

DEO Technology / Active Freewheeling: the DEO technology (Driving Efficiency Optimization) implemented in the ESC has multiple advantages:
 - Rapider and smoother throttle response, better stability and flexibility during flight.
 - Higher driving efficiency, longer flight time.
 - Lower ESC temperature, more reliable operation.

Soft Start-ups & Reverse Brake
 - New soft start-up modes are applicable to regular propeller aircraft and EDF aircraft with different sizes. With Reverse Brake mode enabled when landing can effectively shorten the sliding distance of the aircraft to simulate the landing of a real aircraft (within a super short-distance). Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode are also available; the brake amount is adjustable in normal brake mode while in proportional brake mode, the brake force will be automatically allotted on the basis of the position of radio throttle stick.

BEC - This version has no BEC use seperate Rx battery

Multiple Protections
 - Multiple protection features include start-up, over-current, ESC thermal, capacitor thermal, overload, throttle signal loss (or Fail Safe), and abnormal input voltage effectively prolongs the service life of the ESC.

New Design & Great performance
 - New design brings exquisite look and good heat-dissipating performance. Imported components and the PCB (printed circuit board) with extremely low impedance adopted by the ESC guarantee great current endurance, excellent performance and high reliability. The ESC is available in high-voltage/regular version with different Amps.

Multiple Programmable Parameters
 - Multiple programmable parameters for setups of different fixed-wing aircraft are adjustable via transmitter or Hobbywing LED program box.

Specifications:

● Continuous/peak current: 130A / 160A
● Input voltage: 6-14s lipo
● SBEC output: None (OPTO)
● Wire size/length: 10AWG 150mm (motor side) / 150mm (battery side)
● Connectors: None
● Dimensions: 110 x 50.3 x 33.2mm
● Weight: 221.5g

HobbyWing Flyfun Brushless ESC 40A-OPTO (Version 4.1)

Specification

• Output:  Continuous 40A, Burst 55A up to 10 seconds.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiCd/NiMh
• BEC: 3A / 5V switching mode BEC.
• Refresh rate of the throttle signal: 50Hz to 432Hz.
• Weight:38.8g.

       Features

• Safety arming feature:  Regardless the throttle stick position, the motor will not spin after battery connected.
• Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters.
• User programmable.
• Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field.
• Compatible with Lipo battery and NiCd/NiMH battery.
• Internal timing can be changed to be suitable for different brushless motors.
• Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.
• Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability.
• Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.

Hobbywing FlyFun V5 40A ESC 3-6s BEC

Features:

• DEO Driving Efficiency Optimization Technology
• Soft and prompt response of the controller function
• Higher efficiency, longer flight time
• Lower operating temperature and reliable operation
• 4 different braking modes including thrust reverser
• Braking effect 8-fold adjustable
• Soft start adjustable (normal / soft / very soft)
• LiPo undervoltage protection adjustable (off / 2.8V - 3.8V)
• BEC voltage adjustable 5.2V / 6.0V / 7.4V
• Timing adjustable (0 ° - 30 °)
• And much more besides

Technical specifications:

• Current duration / peak: 40A / 60A
• Cell count: 3s - 6s
• BEC voltage: 5.2V / 6.0V / 7.4V
• BEC current: 8A / 20A
• Cable type / length: 14AWG / 150mm
• Plug rechargeable battery / motor: without / 3.5mm socket
• Dimensions: 47x28x14mm
• Weight: 44g
• Optional accessories: HW30501003 programming box LED universal

Delivery:

• 1x Speed Controller
• 1x Instructions English

Hobbywing FlyFun V5 60A ESC 3-6s BEC

Features:

• DEO Driving Efficiency Optimization Technology
• Soft and prompt response of the controller function
• Higher efficiency, longer flight time
• Lower operating temperature and reliable operation
• 4 different braking modes including thrust reverser
• Braking effect 8-fold adjustable
• Soft start adjustable (normal / soft / very soft)
• LiPo undervoltage protection adjustable (off / 2.8V - 3.8V)
• BEC voltage adjustable 5.2V / 6.0V / 7.4V
• Timing adjustable (0 ° - 30 °)
• And much more besides

Technical specifications:

• Current duration / peak: 60A / 80A
• Cells : 3s - 6s
• BEC voltage: 5.2V / 6.0V / 7.4V
• BEC current: 8A / 20A
• Cable type / length: 14AWG / 150mm
• Plug rechargeable battery / motor: without / 4mm socket
• Dimensions: 68.8x34.6x18mm
• Weight:  73.5g
• Optional accessories: HW30501003 programming box LED universal

Delivery:

• 1x Speed Controller
• 1x Instructions English

FLYFUN series of intermediate level brushless power systems feature outstanding performance, great current endurance and excellent control feel are applicable to different classes of aircraft.

DEO Technology / Active Freewheeling

The DEO technology (Driving Efficiency Optimization) implemented in the
ESC has multiple advantages:
Rapider and smoother throttle response, better stability and flexibility during flight.
Higher driving efficiency, longer flight time.
Lower ESC temperature, more reliable operation.

Soft Start-ups & Reverse Brake

New soft start-up modes are applicable to regular propeller aircraft and
EDF aircraft with different sizes. With Reverse Brake mode enabled when
landing can effectively shorten the sliding distance of the aircraft to
simulate the landing of a real aircraft (within a super short distance,
the FLYFUN 130A/160A-HV-OPTO-V5 doesn’t have this function).
Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode
are also available; the brake amount is adjustable in normal brake mode
while in proportional brake mode, the brake force will be automatically
allotted on the basis of the position of radio throttle stick

Multiple Protections

Multiple protection features include start-up,
over-current, ESC thermal, capacitor thermal,
overload, throttle signal loss (or Fail Safe),
and abnormal input voltage effectively
prolongs the service life of the ESC.

New Design & Great performance

New design brings exquisite look and good heat-dissipating performance.
Imported components, the high-performance 32-bit microprocessor, and the PCB
(printed circuit board) with extremely low impedance adopted by the ESC guarantee
great current endurance, excellent performance and high reliability. The ESC is
available in high-voltage/regular version with different Amps.

Technical specifications

• Brushed/Brushless: BL
• High Voltage/Regular: Regular
• Cont./Peak Current: 120A/150A
• Input: 3-6S LiPo
• BEC Output: Switch Mode: 5.2V/6V/7.4V, 8A/20A   
• Wires & Connectors
• Input Wires: Red-12AWG-150mm*1 / Black-12AWG-150mm*1
• Output Wires: Black-12AWG-150mm*3
• Input Connectors: No
• Output Connecotors: 4.0 Gold Connectors (Female)
• ESC Programing via
• Transmitter: Supported    
• LED Program Card: Not Supported       
• LED Program Box: Supported       
• LCD Program Box: Not Supported
• WiFi Module: Not Supported
• Program Port: Separate Program Wire
• Firmware Upgrade: Not Supported
• Size: 77.2x34.6x19.2mm
• Weight: 93g

New Hobbywing S.BUS2 Telemetry Adapter for Futaba adapter with Hobbywing Platinum V4 / V4.1 / V5 series electronic governor or Hobbywing vehicle model ESC that supports real-time data (refer to relevant product instructions or official website information) and FUTABA equipment, It is easy to send the Telemetry data of the ESC to FUTABA equipment such as receivers, gyroscopes, etc., so that users can view the ESC operating status data (current, voltage, speed, etc.) in real time on FUTABA devices (e.g. remote control).

The two LEDs clearly show the operating status of the adapter. It is compact and lightweight and does not take up too much space made for easy installation.

Specifications

Product Name:S.BUS2 Telemetry Adapter for Futaba
Product Number:30850500
Working Voltage:5-9V
Size:25*13*6mm
Weight:3.5g
Applications:

Support SBUS2 Telemetry Adapter for Futaba Air ESC list:
Platinum 25A V4（No Current data）
Platinum 60A V4（No Current data）
Platinum 80A V4
Platinum 120A V4
Platinum HV 130A V4
Platinum HV 130A V4 OPTO
Platinum HV 200A V4.1 SBEC
Platinum HV 200A V4.1 OPTO
Platinum 150A V5
Support SBUS2 Telemetry Adapter for Futaba Car ESC list:
XERUN XR10 PRO G2S （No Current data）
XERUN XR8 PULS G2S
XERUN XR8 PRO G2
XERUN XD10 PRO （No Current data）
EZRUN MAX8 G2
EZRUN MAX4 HV

Hobbywing Platinum PRO V4 120A ESC SPEED controller for RC models (3S-6S) BEC 10a

Super Soft Start-up

• Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience.
• The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Speed Governing

• High-performance 32-bit processor with a provessing frequency of 72MHz combined with advanced algorithm optimizes the speed governing.
• Together with the adjustable governor parameters it will guarantee every pilot a precise and efficient control experience.

High Voltage Built-in BEC

• The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

DEO Technology

• The DEO (Driving Efficiency Optimization or so-called “Active Freewheeling”)
• technology implemented in the ESC has multiple advantages.
• A very Rapid response to throttle change.
• Higher driving efficiency, longer flight time.
• Lower ESC temperature and a much more reliable operation during flight.

Other Features

• A separate program port for connecting programmer on this ESC allows user to
• Program ESC,
• Check flight data include minimum voltage, maximum temperature, standardized RPM and
• speed curve (in Heli Governing Store mode) of the flight parameters recorded by the ESC,
• Upgrade ESC firmware with a mutifunction LCD program box or a WiFi Module & our
• Apple/Android phone App.

Four Brake Modes

• This Platinum 80A V4 ESC has “Brake Disabled, Normal Brake, Proportional
• Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections

• Multiple protection features include ESC thermal, capacitor thermal (HOBBYWING-patented technology), ESC overload, throttle signal loss(or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

Specifications:

• Product Name: Platinum 120A V4
• Type: Brushless, Regular
• Specifications
• Cont./Peak Current: 120A/150A
• Input: 3-6S LiPo
• BEC Output: Switch Mode:5-8V,10A
• Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
• Output Wires: Black-12AWG-100mm*3
• Input Connectors: No
• Output Connecotors: 4.0mm Gold Connectors (Female)
• (Note: All the wire length above is the original length not the length you see from the outside.)
• ESC Programing via:
• Transmitter: Not Supported
• LED Program Card: Not Supported
• LED Program Box: Not Supported
• LCD Program Box: Supported
• WiFi Module: Supported
• Program Port: Separate Program Port
• Firmware Upgrade: Supported
• Size: 84.3x38.2x20.4mm
• Weight: 107g
• Applications:
  • 500-550 Class Heli (Main Blade: 470-575mm)
  • .70-.90 Class Fixed-wing Airplane 3D, Light Weight FAIF3A
  • EDF (with Diameter≦90mm)

Hobbywing Integrated XRotor 6215 180KV motor / 80A ESC / 2388 propeller for professional UAV, FOC Power !

Integrated & Ready-to-use Propulsion System

The X6 propulsion system, which integrates motor, ESC, propeller and motor mount (with 30-to-28 tube adapter) compatible to 28mm&30mm diameter carbon fiber arm tubes
Easy to mount and use.

Note: with the foldable 2388 propeller, the propulsion system is capable of carrying the load of 5KG  per motor: 20K for Quad and30KG for a hexacopter ).

XRotor 6 Series Power Combo for Agriculutral Drones

• Max. Thrust: 12kg per 1Arm (48V, Sea Level )
• Recommended Takeoff Weight: 3kg-5kg/Axis (48V, Sea Level )
• Recommended  LiPo Battery:12S
• Operating Temperature:-20~65℃
• Combo Weight (approx.):720g
• Motor O.D of Carbon Fiber Tube:30mm/28mm (Tube Adapter INCLUDED)
• KV Rating:180
• Outer motor Diameter: 70mm

ESC Model( integrated)

• XRotor PRO HV 80A FOC V3
• Recommended Input Voltage:6-12S LiPo
• Max. Input Voltage:52.2V
• BEC:NO
• Max. Input Current: 80A(With Heat Dissipation)
• Max. Peak Current (10s):100 A (w/ Good Heat Dissipation )
• Input Wires:12AWG
• Output Wires:14AWG
• Weight:85g(w/o Wires)
• PWM Input Signal Level:3.3V/5V (Compatible )
• Throttle Signal Frequency:50-500Hz
• Operating Pulse Width:1100-1940 μs

Propeller

• Diameter× Pitch  2388
• Weight: 91g (w/ Propeller Adpater, Single Blade: 36g)

Set available as CW and CCW 

This multifunction program box is for programming HOBBYWING brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use. Thanks to built-in OTA programming feature through Bluetooth™, you can now use this device with IOS devices.

This multifunciton LCD program box is applicable for the following HOBBYWING products:

Platinum series of brushless aircraft ESCs, XeRun & EzRun MAX series (V2.0 and later), Platinum and SEAKING PRO series. This device also work with some ESC of QUICRUN series.

• The scope of application encompasses all ESCs that are compatible with the previous version of LCD program box and OTA Bluetooth™ module.
• Whether the programmable box is supported depends on the specific ESC model. Please check your ESC's requirement or contact us.
• USB C Software works for PC users ONLY.
• Built-in OTA Programmer works for both Apple (IOS) and Android users

Specifications

• Size：5.24 x 3.44 x 1.75 in
• Weight：85g
• Input Voltage: DC 5V—12.6V

(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)

• As a programming device, directly use the built-in LCD screen to display, set, and share ESC parameters (import).
• Connect the ESC to a computer using a USB adapter. Use the USB Link application software on the computer to upgrade the ESC firmware and set parameters.
• The OTA Bluetooth™ module: Using the mobile APP to set ESC parameters, upgrade firmware, and read data.(IOS & Android)
• Detect the overall voltage of the lithium battery and the individual voltage of each cell.
• ESC interface(Futaba plug) / Power supply interface (Futaba plug)

Hobbywing 3 in 1 V2 Professional Program Box for Hobbywing EZRUN and XERUN ESCs.

This is Hobbywing 3-in-1 Professional Multifuction LCD Program Box V2 For RC Programmable ESC. This 3 in 1 programming card is intended for configuring hobbywing Xerun, Ezrun and Platinum drives but can also be used to test your Lipo batteries . Its user- friendly LCD interface makes programming quick and easy . With your PC, you can update the inverter firmware and adjust the inverter parameters online. In addition, it is compact, portable and perfectly suited for use in the field.

Feature:

For: XERUN / EZRUN Series Car ESC

Material: Plastic

Color: Black

3 in 1 professional programming card

Allows programming of hobbywing dimmers

Connection possible also via USB

Lipo battery tester function

USB cable included

Excellent Motor Speed Governing

• High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing.
• Together with the adjustable governor parameters guarantee every pilot a precise control experience.

 
A separate program port for connecting programmer on this ESC allows user to

• Program ESC,
• Check flight data include minimum voltage, maximum temperature, standardized RPM and speed curve (in Heli Governing Store mode) of the flight parameters recorded by the ESC,
• Upgrade ESC firmware with a mutifunction LCD program box or a WiFi Module & our Apple/Android phone App.

DEO Technology

• The DEO (Driving Efficiency Optimization or so-called “Active Freewheeling”)
• technology implemented in the ESC has multiple advantages.
• Rapider response to throttle change.
• Higher driving efficiency, longer flight time.
• Lower ESC temperature and a more reliable operation.

Specifications:

• Type: Brushless, High Voltage
• Cont./Peak Current: 130A/160A
• Input: 6-14S LiPo
• BEC Output: No
• Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
• Output Wires: Black-12AWG-100mm*3
• Input Connectors: No
• Output Connecotors: No
• (Note: All the wire length above is the original length not the length you see from the outside.)
• Transmitter: Not Supported
• LED Program Card: Not Supported
• LED Program Box: Not Supported
• LCD Program Box: Supported
• WiFi Module: Supported
• Program Port: Separate Program Port
• Firmware Upgrade: Supported
• Size: 101.0x45.5x27.0mm
• Weight: 154g
• Applications:
  • 550-600 Class Heli (Main Blade: 550-690mm)
  • .90-.140 Class Fixed-wing Airplane, 2m FAIF3A & 3D
  • EDF (with Diameter≦105mm)

The Platinum V5 180A HV V5 is an incredibly powerful and consistent ESC (Electronic Speed Controller) with a 5-12V switch BEC (Battery Eliminator Circuit), suitable for 550-700 helicopters and fixed-wing aircraft. Its exceptional performance is guaranteed by the built-in 32-bit processor, paired with a specially developed algorithm for RPM accuracy, setting it apart from similar controllers on the market. Additionally, the Platinum V5 180A is equipped with various protocols allowing different transmitter systems to access ESC data, including Mikado VBar system and Futaba S.BUS2.

The modern design of the Platinum V5 also incorporates numerous protective features to ensure safety during flight. These include safeguards against overheating of the controller and attached capacitors. To proactively manage heat generation, the controller features a dual-sided heat sink with side ventilation, facilitating efficient airflow through the ESC for effective cooling. Should these measures prove insufficient, the ESC's protective functions engage to prevent further damage.

Features:

• Efficient cooling through cooling chamber design
• Built-in 12V switch BEC (5-12V)
• Supports multiple data protocols e.g. Mikado VBar System, Futaba S.BUS2, etc.
• Including data recording, accessible on the smartphone thanks to Bluetooth
• Multiple protection functions (e.g. against reverse currents)
• 16 adjustable parameters including 4 flight modes:
• Fixed wing
• Helicopter - External Governor
• Helicopter - Eleven Governor
• Helicopter - Store Governor

Technical Specifications:

• Type: Brushless High Voltage
• Current (cont./peak): 180A/260A
• Cells: 6-14S LiPo
• BEC: 5-12V @10A (Switch Mode)
• Cable battery/motor: 1x 10AWG (red, black) 3x 10AWG (black only)
• Programming: - LCD Programming Box - OTA Program Module
• Firmware Upgrade:
• Telemetry: Mikado VBar; Futaba S.Bus2; etc.
• Dimensions: 100.6 x 45.5 x 26.1mm
• Weight (incl. cables): 250.6g
• Application: 550-700 electric helicopters and fixed-wing

Delivery:

• 1x ESC Platinum V5 180A HV SBEC
• 1x Manual

The Platinum V5 260A HV V5 provides constant speed control, ensuring an excellent flying experience with its powerful 12V switch-mode BEC. The innovative housing design, featuring additional windows on the sides and internal structure, enables highly effective heat dissipation. This allows the generated heat to be directly transported from the circuit board to the outside through the shortest path. This is particularly necessary because the integrated 32-bit processor enhances the RPM algorithm's precision, thereby further strengthening the overall performance of the Platinum ESC (Electronic Speed Controller). The finely adjustable speed sensitivity ultimately allows every pilot to find a setting that suits them perfectly.

The ESC also incorporates Efficiency Optimization Technology with Synchronous Rectification (DEO: "Driving Efficiency Optimization" - Active Freewheeling), which brings several advantages at once:

- Faster throttle response, improved flight stability, and flexibility.

- Higher driving efficiency and longer battery life.

- Lower temperature increase of the ESC, ensuring reliability.

FEATURES

• Efficient cooling through a sophisticated heat dissipation system with windows
• Built-in 12V switch-mode BEC (5-12V)
• Supports multiple data protocols, e.g.,
• Mikado VBar System, Futaba S.BUS2, MSH Brain, and iKON
• Includes data recording accessible via the OTA module on the smartphone
• Multiple protection features
• 16 adjustable parameters, including 4 flight modes: Fixed Wing || Helicopter - External Governor || Helicopter - Express Governor || Helicopter - Store Govern
  
  Technical Specifications :
  
  
  • Type : Brushless High Voltage
  • Current cont./peak : 260A/400A
  • Cells : 6-14S LiPo
  • BEC : 5-12V @10A (Switch Mode)
  • Cable battery/motor : 1x 8AWG (red, black) || 3x 10AWG (black)
  • Programming: LCD Programming Box | OTA Bluetooth Programmer || Seperate Programming Port
  • Firmware upgrade : Yes
  • Telemetry : Mikado VBar;Futaba S.Bus2; || MSH iKon;Brain and etc.
  • Dimensions : 89x50x34mm
  • Weight (incl. cable) : 297g
  • Application : 700-800 Electric Helicopter (main rotor length: 690-880mm)
    

Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift
issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds,
this will definitely create a perfect starting point for every flight.

Excellent Motor Speed Governing
High-performance 32-bit processor with a running frequency of 72MHz combined with
advanced algorithm optimizes the speed governing. Together with the adjustable
governor parameters guarantee every pilot a precise control experience.

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of
over 10A and peak current of 25A can supply enough power for your servos to operate efficiently.

Specifications:

• Product Name: Platinum HV 130A V4
  Type: Brushless, High Voltage
  Cont./Peak Current: 130A/160A
  Input: 6-14S LiPo
  BEC Output: Switch Mode:5-8V,10A
  Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
  Output Wires: Black-12AWG-100mm*3
  (Note: All the wire length above is the original length not the length you see from the outside.)
  Transmitter: Not Supported
  LED Program Card: Not Supported
  LED Program Box: Not Supported
  LCD Program Box: Supported
  WiFi Module: Supported
  Program Port: Separate Program Port
  Firmware Upgrade: Supported
  Size: 101.0x45.5x27.0mm
  Weight: 169g
  Applications: 550-600 Class Heli (Main Blade: 550-690mm)
                      .90-.140 Class Fixed-wing Airplane, 2m FAIF3A & 3D
                          EDF (with Diameter≦105mm)

Hobbywing Platinum PRO V4 - 80A (3S-6S)

This is the Hobbywing Platinum Pro V4 80A ESC, for use with 450-480 sized Helicopters.  

One of a Kind Design
The elegant case is made from aluminum alloy material. Each cooling slot and its fin were carefully designed and arranged, and the case has gone through oxidation, coloring and edge-highlighting.

Innovative Heat Dissipation Structure
The innovative "duo" stacking structure allows all components on both sides of the printed circuit boards to quickly conduct heat to the aluminum case.

Excellent Motor Speed Governing
The high performance 32-bit processor, combined with advanced algorithm, makes the motor speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Super Soft Start-Up
The Platinum 80A makes the motor start extremely soft and avoids tail-drift issues. The start-up time is adjustable within 8 to 25 seconds. This will definitely create a perfect starting point for every flight.

Super BEC
The built-in switch mode BEC with a continuously adjustable output voltage, range from 5V to 8V (steps: 0.1V). It is certain to put out the power you need for rapid, precise steering servo operation.

Great Current Endurance
A high-quality and high-voltage MOSFET with a great current endurance guarantees the ESC's safety especially in a extremely high power demanding situation.

Built-in Sparkproof Circuit
Built-in sparkproof circuit effectively eliminates sparks produced at the "powering-on" moment and prolongs the connectors lifespan.

Specifications:

• Main Applications: 450-500 Class Helis
• Governor: Internal
• Built-in BEC: Yes; Switch Mode: 5V-8V, 10A
• Continuous Current: 80A
• Cell Count: 3-6S
• Case: Aluminum Alloy Shell
• Programming: LCD Program Box, WiFi Module, via Separate Program Port
• Peak Current: 100A
• Weight: 97g
• Dimensions: 84.3x38.2x20.4mm
• DEO Technology: Yes
• Spark-Proof: Yes

Hobbywing Platinum PRO V4-60A 3-6S LIPO, BEC 18A

Specifications:

• Type: Brushless
• Cont./Peak Current: 60A/80A
• Input: 3-6S Lipo
• BEC Output: Switch Mode: 5-8V, 7A
• Wires&Connectors:
• Input Wires: Red-14AWG-100mm*1/Black-14AWG-100MM*1
• Output Wires: Black-14AWG-75mm*3
• Input Connectors: No
• Output Connectors: 3.5mm Gold Connectors (Female)

(Note: All the wire length above is the original length not the length you see from the outside.)

• ESC Programing via: Trasmitter: Not Supported
• ESC Programing via LED Program Card: Not Supported
• ESC Programing via LED Program Box: Not Supported
• ESC Programing via LCD Program Card: Supported
• WIFI Module: Supported
• Program Port: Program/Throttle Wire
• Firmware: Firmware Upgrade: Supported
• Size: 48.0x30.0x15.5mm
• Weight: 49g
• Application: 450-480 Class Heli(Propeller: 325-326mm)

The UBEC is an external switching mode DC-DC regulator; it draws the DC voltage from 2-6S Lipo battery, drops it to a voltage level that is suitable for receivers and other electronic devices, and keep providing the stable current output up to 10Amp. As the UBEC has such a powerful output capability, so it is particularly applicable for large helicopters and fixed-wing aircrafts.

Specifications:

• Input Voltage: 6V－25.2V (2-6S LiPo)
• The output voltage is programmable by dip switches.
  4 Options: 5.0V/6.0V/7.4V/8.4V
• Output Amperage: Continuous Current: 10A, Peak Current: 20A
• Dimension: 43.1 x 32.3 x 12.5mm (L x W x H)
• Weight: 36g  (1.27oz) 

The UBEC uses a high-performance DC-DC switching module that draws its voltage from 2-6S LiPos. The module regulates the voltage down to a previously defined value that is required by the receiver or other electronic devices. This is extremely stable and the output current is permanently up to 10A or briefly at 15A.

Because this UBEC is not only powerful, but also waterproof and dust-proof, it is particularly suitable for the use in Cars, but can be used in other models.

Features:

Highly efficient DC-DC regulator chip for a transmission efficiency of over 90%.

An all-metal housing design helps conduct heat and reduces electromagnetic interference.

Adjustable UBEC output voltage (6.0V / 7.4V / 8.4V) applicable for servos with different voltages.

The continuous current of UBEC is up to 10A and max. 15A and can thus be used for various electrical devices (e.g. car lights, winches, windshield wipers, etc.).

Excellent waterproof and dust-proof design with IP67 rating.

Multiple protection functions: over current protection, output short circuit protection, overheating protection, safe and reliable.

External switch enables the UBEC to be switched on / off easily.

LED display to show the status of the UBEC.

1. Input Voltage: 2-6S LiPo
2. Output Voltage: 6.0V / 7.4V / 8.4V (adjustable)
3. Current cont./peak: 10A / 15A
4. Dimensions: 45x20x16.2mm
5. Weight: 34g

HobbyWing Skywalker 12A ESC for 2S - 3S with 5V BEC

Specification:

• Output: Continuous 12A, Burst 15A up to 10 seconds.
• Input Voltage: 2S Lipo, 5-6 cells NiMH.
• BEC: 2A / 5V Linear mode BEC.
• Refresh rate of the throttle signal: 50Hz to 432Hz.
• Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.(BLM = BrushLess Motor)
• Size: 38mm*18mm*7mm.
• Weight: 10g.

Hobbywing HV 25A UBEC offers elegance, power, extended protection features, and simplicity all in a compact solution. Housed inside of an aluminum case, the UBEC is able to dissipate more head and reduce electromagnetic interference. A high efficiency DC-DC regulator paired with special designed circuitry offers conversion efficiency over 90%. Capable of 25A continuous current, the UBEC is the ideal choice for even the most demanding of applications.

The UBEC accepts a wide input voltage ranging from 3s 11.1V to 18s 66.6v, includes an external switch to power on and off the unit, and output voltage is adjustable from 5v, 6v, 7.4v, and 8.4v. UBEC shoot-through protection, which prevents the voltage of the main power supply from directly flowing to the output end of the UBEC and causing any damage to the connected electronic device when the UBEC is accidentally damaged, plus the protections like over-current, (output end) short-circuit, overheat, low-voltage cutoff guarantee safety and reliability.

Additionally, the UBEC features the ability to connect to a separate 2s LiPo providing backup in the event that the main power fails.

Specifications:

• Input Voltage: 3-18s LiPo
• Backup Input Voltage: 1-2s LiPo
• Output Voltage: 5/6/7.4/8.4V
• Output Amperage: 25A Cont. | 50A Peak
• Weight: 74g
• Size: 55x40.2x17.6mm

UBEC 3A with selctable output voltage

The 3A-UBEC is a switch mode DC/DC regulator, it outputs a consistent safe voltage for the receiver, gyro and servos.
It is very suitable for RC helicopter and other RC models especially when the built-in BEC in the speed controller has a very limited output capability.

Specification:

• Output Voltage: 5V@3A or 6V@3A (Selectable by using a jumper connector)
• Continuous output current: 3 Amps
• Input: 5.5V-26V (2-6S Lipo or 5-18 cells NiMH /NiCd)
• Size: 43mm*17mm*7mm (L*W*H)
• Weight: 11g

Features:

• Uses an advanced switch mode DC-DC regulator IC.
• The output is powerful enough even working with 4S to 6S Lipo battery.
• Battery polarity reversal protection.
• A metal shield and a filter significantly reduce the electromagnetic interference.
• The working status is shown by an LED, it lights when the UBEC works normally.

With the update of the Platinum ESC v4/4.1 by Hobbywing, Mikado's remote control systems are now also supported. This cable is used to connect a VBar NEO with the corresponding ESC. Thanks to the additionally installed socket, the fan connection is still available.

Cable length: approx. 50cm.

HOBBYWING XRotor 40A V1

Hobbywing has released XRotor 40AInternational Version B 30901001 under Drone System category

Rapid Throttle Response
Dedicated program for multi-rotor ESCs, which is better than various
open-source programs, greatly improves throttle response.

Easy to Use
All settings except the "Timing (adjustable between High and Intermediate)"
are preset, making usage simple, highly intelligent and adaptive.

Less Signal Interference
The twisted-pair throttle signal cable effectively reduces interference produced
in signal transmission and makes flight more stable and reliable.

Super Low Internal Resistance
Good quality MOSFETs utilized by this XRotor 40A ESC make
internal resistance low but current endurance high.

Super High Throttle Signal
Compatible with various flight-control systems and supports a
throttle signal frequency of up to 621Hz.

Specifications

• Cont./Peak Current : 40A/60A
• LiPo Cells : 2-6S LiPo
• BEC Output : No

Wires & Connectors

• Output Wires : No
• Input Connectors : No
• Output Connectors : 3.5mm Gold Connectors (Female)
• Throttle Range Calibration : Supported
• Stick Programming : Supported
• DEO : Not Supported
• OneShot Mode : Not Supported
• Timing : Supported
• Light Color : Not Supported
• Motor Rotation : Not Supported

Size & Weight

• Size : 65.5x25.0x8.7mm
• Weight : 28g

Applications

• 550/650 Class Multirotors

The Hobbywing XRotor 40Amp Multi-Rotor Brushless ESC is a great choice for 550/650 Class Multirotors. With quadcopter optimized software and programmable timing, this easy to use ESC provides stable flight characteristics that make it perfect for custom builds.

Features

Special core program for multi-rotor controllers greatly improves throttle response.
Specially optimized software for excellent compatibility with disc-type motors.
All settings except the timing are preset, making usage simple, highly intelligent and adaptive.
The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals)
Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
MOSFET with extra-low resistance brings high performance and great current endurance.
Specifications

Constant Current : 40 A
Peak Current : 60 A (10 Seconds)
BEC : No BEC-Opto version
Lipo : 2-6S
Programmable Item :Timing （High/Intermediate)
Weight : 32gram
Size : 56.0x25.2x12.4mm

Avizar 12Amps ESC for 250-290 size Quads

SimonK Firmware pre-loaded
 

• Continuous current: 12A
• Voltage: 2S-3S LiPo
• Max Current : 15A
• Bec : 1A/5V
• Dimensions : 25x20x7mm
• Weight : 9g

Xrotor Pro 40A Brushless ESC Hobbywing for multicopter  with Special core program for multi-rotor controllers greatly improves throttle response.

• Specially optimized software for excellent compatibility with disc-type motors.
• All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
• The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
• Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
• Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
• MOSFET with extra-low resistance brings high performance and great current endurance.

Specifications:

• Contiuous current: 40A, Peak current ( 10s ): 60A
• BEC: No
• NO. of cells: 2 - 6S
• Wired or Cob- stock dependant

DEO ( Driving Efficiency Optimization ) technology significantly improves throttle linearity and driving efficiency
 

Xrotor Pro 50A Brushless ESC Hobbywing for multicopter with Special core program for multi-rotor controllers greatly improves throttle response.

1. Specially optimized software for excellent compatibility with disc-type motors.
2. All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
3. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
4. Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
5. Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
6. MOSFET with extra-low resistance brings high performance and great current endurance.

Specifications:

1. Cont/Peak Current 50A /75A
2. Multicopter Applicable Over 650 Class Quadcopter
3. Input:2-6S Lipo
4. Bullet connector size:3.5 mm
5. BEC Output:NO

Programming item Timing (High/Intermediate), LED (On/Off), LED Color (Red/Green), Motor Rotation(CW/CCW)

• Size :48 x 30 x 15.5mm
• Weight 46g

Set of 1 pcs.