Hobbytech CRX18 Flat Cage 6WD Orange #1.CRX18-6WD-FC-OR
Description
New version 6WD and Flat Cage: The CRX18 6WD flat cage retains the features of the CRX18 but with 2 additional drive wheels. The CRX18 6WD offers new horizons and new possibilities for driving. It also differs by its rear plate equipped with a roll cage and a spare wheel. Other realistic accessories also complete this model. The CRX 18 is a 1/18th scale reproduction of the CRX: the iconic model of our brand. The mini is designed as a 1/10th scale: metal beam chassis, central transmission box (positioned slightly forward) with a low-positioned engine and 2 bridges that are each connected to the chassis by 4 links. The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the front bridge (AMS mount). The motorization is entrusted to a 55T micro carbon motor. In terms of electronics, the CRX18 is equipped with an all-in-one module (receiver - ESC) that has 9 connectors for connecting a complete lighting system with blinkers and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S 600 mAh which allows to drive for several hours. In terms of aesthetics, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those that equip the CRX2. The bodywork has the same grille and the same accessories (jerrycan, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the footpegs are equipped with a slot in which the bottom of the bodywork is housed to avoid damage on obstacles. Many options will be available to improve the performance or look of the CRX18: ball bearings, hydraulic shock absorbers... The CRX18 can be driven indoors or outdoors. Small spaces as well as large spaces suit him perfectly. Its crossing capabilities are impressive. On rocks: its lightness, its balance and the efficiency of its tires allow it to cross incredible obstacles. The radio allows to adjust the end of the stroke (throttle and direction). The throttle adjustment allows to refine the driving and to adapt the speed of the CRX18 according to the terrain and obstacles. Included in the boxCRX18 Transmitter 600 mAh 2S battery USB charger DimensionsWheelbase: 155.20 mm + 65.7 mm Total length: 298.20 mm Width: 123.8 mm Height: 120.60 mm Ground clearance at transmission level: 39.70 mm Ground clearance at bridge level: 17.1mm Front attack angle: 59° Rear attack angle 76.9° |
Hobbytech CRX18 Flat Cage 6WD Orange #1.CRX18-6WD-FC-OR
Hobbytech CRX18 Flat Cage 6WD Orange #1.CRX18-6WD-FC-OR