Graupner
3-Blades Prop 28 x 18cm
3-Blades Prop 28 x 18cm (1pc) Features:
|
€9.99
€8.26 Ex VAT
Airscrew C-PROP 5x3" 5/6/8 mm (5 pairs)
Airscrew C-PROP 5x3" 5/6/8 mm (5 pairs) |
€12.90
€10.66 Ex VAT
Cam Prop
CAM PROP. Very high efficiency and broad effective working envelope. Range of profiles specially calculated for each propeller, ensuring best possible aerodynamics. CAM (Computer Aided Manufacturing) methods guarantee close tolerances and maximum possible accuracy. A series of propellers for models with electric or glow motors. As they are designed primarily for electric flight adaptors, all these propellers are supplied with an 8 mm centre bore. To use them with OS glow-plug motors tubular spacers are required. size: 14,5/4'' 36-10cm |
€11.20
€9.26 Ex VAT
Exhaust Header for Super Tigre ST S61-S75-S90 Black color
Exhaust Header for Super Tigre ST S61-S75-S90 Black color |
€27.00
€22.31 Ex VAT
Graupner Cam Folding Prop 36x20cm - 14/8' #1336.36.20
Graupner, 1336.36.20, Propeller blades Cam Folding Prop 36x20cm - 14/8" The pairs packed propeller blades can be used as a replacement sheets or in combination with the separately available spinners. |
€9.99
€8.26 Ex VAT
Graupner CAM FOLDING PROP blades 30x15 cm
Graupner CAM FOLDING PROP blades 30x15 cm CAM FOLDING PROP propeller blades Technical information:
|
€9.00
€7.44 Ex VAT
Graupner CAM FOLDING PROP blades 30x15 cm
Graupner CAM FOLDING PROP blades 30x15 cm CAM FOLDING PROP propeller blades Technical information:
|
€12.00
€9.92 Ex VAT
Graupner Electro 3-Blade Prop 10x5L
Graupner Electro 3-Blade Prop 10x5L Features:
Specification:
|
€13.90
€11.49 Ex VAT
Graupner Electro Prop 11X5
Graupner Electro Prop 11X5 A new series of propellers from Graupner designed specifically for electric powered airplanes and multi-rotor 'copters.There is an exact same size propeller for rotation in the opposite direction. These propellers are therefore ideal for counter-rotating setups. |
€9.00
€7.44 Ex VAT
Graupner Electro Prop 11X5L
Graupner Electro Prop 11X5L A new series of propellers from Graupner designed specifically for electric powered airplanes and multi-rotor 'copters.There is an exact same size propeller for rotation in the opposite direction. These propellers are therefore ideal for counter-rotating setups. |
€9.00
€7.44 Ex VAT
Graupner Electro Prop 12x6L
Graupner Electro Prop 12x6L A new series of propellers from Graupner designed specifically for electric powered airplanes and multi-rotor 'copters.There is an exact same size propeller for rotation in the opposite direction. These propellers are therefore ideal for counter-rotating setups. |
€9.50
€7.85 Ex VAT
Graupner Electro Prop 8x5
Graupner Electro Prop 8x5 A new series of propellers from Graupner designed specifically for electric powered airplanes and multi-rotor 'copters.There is an exact same size propeller for rotation in the opposite direction. These propellers are therefore ideal for counter-rotating setups. |
€6.50
€5.37 Ex VAT
Graupner Electro Prop 9X5
Graupner Electro Prop 9x5 A new series of propellers from Graupner designed specifically for electric powered airplanes and multi-rotor 'copters.There is an exact same size propeller for rotation in the opposite direction. These propellers are therefore ideal for counter-rotating setups. |
€7.50
€6.20 Ex VAT
Graupner Heavy Duty Switch Profi GOLD ,Built in Charging Socket
Graupner Heavy Duty Switch Profi GOLD ,Built in Charging Socket, prefect for power switch between receiver battery and receiver |
€11.00
€9.09 Ex VAT
Graupner IN-Tank Silicone Fuel Line 2x3mm, special for In-line fuel tank Nitro fuel , 1m long
IN-Tank Silicone Fuel Line 2mm inner ID,3mm outer ID. special for In-line fuel tank Nitro fuel.Very flexible. Pack of 1 meter |
€3.00
€2.48 Ex VAT
GRAUPNER MC-32EX tray type Transmitter HoTT 2.4GHz remote control radio
With its 32 channels, the Graupner mc-32 HoTT console transmitter is a high-end transmitter for true professionals and modelers who value maximum safety, stable telemetry, intuitive programming and maximum functionality. TAILOR-MADE FOR YOUR REQUIREMENTS The huge range of hardware and software features offers an almost limitless variety. Whether it's functionality and switch assignment, the screen layout that can be customized down to the last detail, or the extensive voice output - you can adapt your transmitter to your preferences and habits. And that without programming knowledge or thick manuals. Fast, easy and intuitive! Flexibility and configurability are the hallmarks of the Graupner mc-32 EX! FULL CONTROL - FULL FUNCTIONALITY The Graupner mc-32 EX HoTT comes without additional modules on real 32 channels in the basic equipment! This gives you limitless functionality and control for any type of model. Choose from 5 different model types such as flying models (electric, combustion or turbine powered), helicopters, multicopters, vehicles and boats. Store your different models on each of the 999 model memories. 12 phases (levels) and 16 curve mixers can be programmed globally or phase-dependent. You need more channels and the switches are running out? The mc-32 EX includes an additional 64 digital switches that can be assigned and controlled with a simple tap, using the widget menu. Create nearly infinite digital switch combinations to control lighting or smoke, turn cranes or water cannons, or just about anything you can think of without running out of switches. If that's not enough, you can add up to 7 more switches by simply plugging them in. The logic switches (AND, OR, EQUAL, UNEQUAL, AND max, OR max, XOR max, |A|>=|B|, A=B, |A|=B) with adjustable time delay and linear or digital switching output, encoder and combination switches increase the variety of switching and control possibilities enormously. Each of these switches controls the functions you want to realize depending on its switching position or the stick position. You determine how each individual switch is to be named. BIND UP TO 4 RECEIVERS AT THE SAME TIME Bind up to four 2.4GHz receivers at the same time and define the distribution of the channels as you like. As an example, one 6-channel receiver can be installed per wing and control the ailerons, airbrakes, landing gear and lights. All that is then required is to route the power supply to the individual wings and you are ready to go. No complicated cable routing or expensive distributor is needed! This provides simplicity coupled with all the benefits of RF redundancy. PERFECTLY MATCHED HARDWARE The quad ball bearing stick units and with a Hall sensor resolution of 2400 steps (equivalent to a 0.5us servo pulse change), provide a pure feeling of control over your model. The integrated 3-step switches offer convenient switching of phases (levels), motor, autotrim or other user-definable functions. The power units can withstand bad weather conditions and are easily and comfortably accessible from the back of the transmitter to adjust them to your preferences. The transmitter can also be equipped with 4D sticks. However, one of the two 4D encoders is then connected instead of the upper roller-shaped encoder in the transmitter, which can be connected to any other free slot instead. ERGONOMIC HOUSING You were expecting a completely new design for the new mc-32 EX? The entire Graupner team unanimously decided against it without a long discussion! This is because the design of our console transmitters was created in 2008 by a Swabian design office together with world champion pilots, who paid full attention to the ergonomics of the transmitter. Every switch, every control sits exactly on the millimeter in the perfect position, which was determined in numerous studies with model sport professionals. And for long-time mc users, the new mc also feels immediately familiar in the hand. The mc-32 EX is encased in a sturdy aluminum frame. The switches, buttons and displays are housed in a high-quality plastic casing that retains its pleasant feel even in extreme temperatures. FEATURES 32 proportional control channels 64 user-definable digital switches 999 model memories Extensive voice output Binding of up to four receivers for channel expansion (max. 32 channels and 64 digital switches). The selected receiver transmits the telemetry data. Telemetry switchable via channel 16 Servo frequency 10ms or 20ms for analog servos Model specific, group or global binding mode. Model types: Model aircraft, helicopter, multicopter, vehicle, boat 12 customizable phases (planes) with 16 free mixers each (192 mixers in total) 8 wing types, 6 delta wing types, 3 tail unit types Multi-engine control (4) 6 user-definable display pages with numerous selectable widgets Context-sensitive help texts easily accessible via "? Servo balancing 8 phase-dependent trim functions and 5 trim types 6 phase-dependent, adjustable clocks 8 phase-dependent quad rate and expo settings 16 phase-dependent curve mixers 8 dual mixers 3 channel sequencers 3 ring limiters 12 combination switches programmable from up to four switches 12 logic switches 12 sensor switches (digital or linear output) 4 snap-roll mixers 8 area and master mixers 8 assignable and configurable system alarms 8 assignable and configurable user warnings 8 assignable and configurable global and phase-dependent encoder announcements each 8 assignable and configurable global and phase-dependent voice announcements each Vario and control menu with dead zone setting Real-time wireless setting of receivers, telemetry and flight controllers Integrated file manager Maximum safety Extremely high range FHSS, frequency hopping over up to 75 channels Maximum immunity to interference due to optimized frequency hopping, wide channel spread and antenna diversification Intelligent data transmission with correction function Range test and warning function Undervoltage warning Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional down to 2.5 V) Numerous fail-safe functions Highest precision Shorter response times adjustable (10ms period time) No additional delays due to module processors. All hopping management is done directly by the 32-bit main processor. Synchronous servo run by simultaneous control of the servo outputs in blocks of 4 possible Unique pilot feeling Largely delay-free control responses due to direct processing Telemetry evaluation in real time Wireless instructor/student function Technical data :
Included in the box
|
€1999.00
€1652.07 Ex VAT
GRAUPNER MZ-32 HOTT Single Transmitter with Carry case, battery
The mz-32 is centered around you
|
€1159.00
€957.85 Ex VAT
Graupner Propeller G-sonic Pro 10x7' 25x18 #GR1314.10x7
Graupner Propeller G-sonic Pro 10x7' 25x18 #GR1314.10x7 this is a carbon reinforced fully balanced propeller 10x7" |
€9.00
€7.44 Ex VAT
Graupner Propeller G-sonic Pro 11x8 28x20 #GR1314.11x8
Graupner Propeller G-sonic Pro 11x8 28x20 #GR1314.11x8 this is a carbon reinforced fully balanced propeller 11x8" |
€9.00
€7.44 Ex VAT
Graupner Propeller G-sonic Pro 12x7#GR1314.12x7
Graupner Propeller G-sonic Pro 12x7#GR1314.12x7 this is a carbon reinforced fully balanced propeller 12x7 |
€10.00
€8.26 Ex VAT
Graupner Sintered Fuel filter with Inner filter, safe fuel passage
The large filtering area cleans the dirt from the fuel while allowing the fuel to continue flowing. In event of blockage still lot of fuel can pass by via the cleaning filter without blocking the filter itself and let your engine work. Easy to clean, and long lasting Length +-29mm Set of 1 complete Filter |
€6.90
€5.70 Ex VAT
High-performance electronic switch Powerbox DigiSwitch V2 JR / JR
High-performance electronic switch Ultra-light unit, compact format Regulated output voltage Redundant switch and regulator circuitry User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated Separate RGB LED voltage indicators for each battery Telemetry support for CORE systems Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH Regulator monitoring Suppression of servo feedback currents Technical specs
|
€54.90
€45.37 Ex VAT
Pouch for Windmaster
A water-resistant protective nylon bag is available for windmaster .The bag has a Velcro ® fastener for ease of opening and a practical belt loop enabling you to carry Windmaster with you at any time. |
€8.00
€6.61 Ex VAT
Repair FPV Racing Gate Tape RED
Repair FPV Racing Gate Tape RED Specification: |
€6.99
€5.78 Ex VAT