Generic Accessories

These Silicone cable ties by Avizar can be used to bundle several cables to provide neat and orderly sorting.
Brilliant resistance :The cable ties are made of elastic silicone and are very robust.
Reusable : The detachable silicone closure enables up to 600 openings and closings.
Adjustment :The length can be optimally determined by the 7 fixing holes.
Multifunctional application :The cable ties can be used for any cables, perfect for vibrations.
Soft: Silicone food grade, Will not damage the cables

Practical diameter when closed: 1cm up to +-4cm

• Size: 97mm x 10mm x 1.5mm
• Temp: -30C -> +270C
• Outdoor resistance: up to 5 Years
• Pack of 10

Alu Adjustable control horns with ball link and hardware.

Dimension

• M4×40mm
• 1 set incl 1 horn with hardware
  

Century Servo Mount set with Wire lock and Pushrod extension

Included in the set
10 x Servo Mount set
2 x  Servo wire mounting lock
1 Pushrod extension for  2-3mm

Throw device for Any remote controlled system, Aluminium 6061 cnc produced.

Specifications:

Material: CNC 6061 Aluminum alloy
Weight: 55g
Made to release payload up to 8-10kg

Included parts with 25T servo arm (Futaba/Savox type)

Made to work with Standard size servo (not included)

Servo not included

FEATURES: Great for adding strength to surfaces 90° cross weaves with white coloring
Consistent weaves for smoother finishes

INCLUDES: One Medium weight strip 5cm x 100cm 165 g/m²

Model AIRPLANE CNC STAND V2 SILVER, fits most size Airplanes, easy folding, easy to carry

Material: Aluminium with Low Density foam;

Anti-Skids to avoid slipping.

Silver color
Wide Application: Suitable for all RC airplane models

Best replacement links available in the market.

RC ball links are made from high strength low friction "DELRIN" nylon and suitable for use on 2.0 & 2.3mm push-rods as standard but can also be drilled out to suit 2.5mm and even 3mm control rods.

Pack of 10. Available in neon Green , Neon pink and Neon Yellow colors

Replacement O-Ring FKM for MRCI collector 16x3.55mm, set of 2

Set of 2

Includes:

- SAB HELI DIVISION Neck Strap x 1pcs

a MUST, Peace-of-mind for pilots With 7 LEDs providing instant, accurate receiver battery voltage status, the VoltWatch is a super accessory for any modeler.
Pilots simply mount the VoltWatch anywhere the 7 tiny status lights can be seen Selectable switch to choose 4.8 or 6.0v.
Very lightweight unit can be mounted on the side of the fuselage
Draws amazingly low current less than 10mA
Plugs into any open receiver channel

• Lock Clips prevents Servo Extenstion Connections From disconnection in the air, best connector Insurance
• Loghtweight and stable will not impose any burden on your model
• Could Save Your model From A Costly Crash If A Servo Becomes Un-Plugged
• Easy to Install,Fit All Servo Extensions Including JR, Futaba, Hitec, Spektrum, Airtronics, etc.

Set of 10.

Choice of colors

Viton Muffler O-Ring 20x3mm Black

Those O-Rings makes it easy to always have a replacement o-ring muffler, Hatori and many others

Specifications:

Material Viton

Size: ID-14mm, OD 20mm, Thickness 3mm

Set of 4

Suitable for 6mm CARBON tubes.
Set of 4

*If you need tubes, please order set of 2 tubes 6mm

EZ Pushrod Connector Linkage Stopper 1.3mm, set of 10

EZ Pushrod Connector Linkage Stopper 2mm, set of 10

RC lost Airplane/helicopter/drone  finder Alarm.

• Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.
• Turn on your TX. and you will hear 2 x beep sound.
• Do not move any of the control stick on the TX or simply turn off the the TX. You will hear a continuous beep sound after 1 minute. It will stop once u turn on your TX or move the control stick.
• If you ignore the continuous beep sound for around 2minutes, the beep sound will change the a louder V sound.
• You need to disconnect the alarm from the receiver in order to switch of the alarm.

Specifications:

• RC Radio Control  Lost Finder Tracker
• Suitable Controller: All PPM/FM, PCM/FM, AM Tx/Rx
• Loud >85dB alarm gets your attention
• Two alarm tones pattern
• Works with AM/FM PPM or FM/PCM R/C systems
• Plugs into any standard servo channel
• Operating Voltage(v) : 4-6v
• Current Drain(mA) : 1-35
• Can be heard in 50 meter distance

How to set up

1. 1. Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord
2. 2. Turn on your transmitter
3. 3. Turn on your receiver then you will hear two beep sound
4. 4. To test if it is functioning:
5. Do not move any of the control stick on the transmitter for 1 min. or simply turn it off
6. You will hear a continuous beep sound after 1 minute
7. If you ignore the continuous beep sound for around 2 minutes, the beep sound will change to a louder V sound
8. It will stop once you move the control stick or power off the receiver
9. 5. If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 min for the alarm sound
10. 6. By the tracking sound, you will be able to locate your RC plane / Helicopter
11. 7. To stop the alarm : Move the control stick or Power off the receiver
12. Can be connected to any kinds of servo
13. Should be connected to the servo that runs when flying

This item made of metal, threaded on one end, and drilled on the other to be soldered onto a piece of wire, of glued to carbon rod.

Threaded Coupler for 2mm rod, fits 2mm clevises

Set of 2

NEW - NEON COLOURED !!

Made from the same low friction polymer resin as our regular "Rocket" ball links but now in high visibility neon orange, green and yellow.
Suitable for use on 2.0 & 3 mm pushrods but EASILY can be re-drilled to suit up to a 3mm thread if required.

Norlam Standard length shank measuring 22mm from ball centre to the end and are suitable for fitting to 3/16" (4.76mm) control balls.

Shorter are 14mm* good for Servos for tail and other short applications

Available in standard or short body versions.

Supplied in packs of 10

Rocket neon Double ball Links , perfect for airplanes,helicoptes, cars.
6 pieces in a set

Don't have the battery slip out while flying out of the switch or just lock in the servo extensions securely
Clip for servo connector or extension lead joint, to prevent the connection breaking under outside force.

10pcs in set

colors:

• Blue
• Purple
• Yellow
• Green
• Black

Flybar conus weight and stiffener.
Those conical  adapters must be fitted on any Helicopter to balance the flybar.
The conus creates good and equal Load Sharing on the Flybar Area and will prevent the flybar to weaken and break as a result of vibrations.This is a "Must" part for any Helicopter.
Fit 4mm flybars , made from  7075 Alu , set of 2 pieces.

Radial Mount for motors with 3mm shaft