EV-Peak

EV Peak AR1 500W DC Charger 11-32V together with combo PU2 power supply

EV-PEAK AR1 integrates battery technology together with touch-operated system.
It is equipped with a 128x64 pixel resistive touch screen,which plays very important role in the
entire system.
Every operating procedure and status change can be shown on this screen,making the operating procedures very intuitive. When the battery is working, you can
directly check the battery capacity, battery voltage, charging time and internal resistance on the screen.
Additionally,the entire charging procedures can be recorded and generated into a charging curve for you to check on the screen.

AR1 can be powered up with 12V car battery or 11-32V output power supply, suitable for use with LiPo / LiFe / LiHV / Li-lon / NiMH / NiCd / Pb battery,
maximum 25A charge current and maximum 300W charge power.Integrated high-performance micro processor and high-efficient cooling system,control the charger always under a safety temperature
situation

Specification:

• DC input voltage  11.0V-32.0V
• Charge power  max.300W
• Discharge power max.30W
• Charge current     0.1~20.0A
• Discharge current  0.1~20.0A
• Regenerative discharge power     max. 300W
• Balance current  400mA
• LiPo/Li-Ion/LiFe/LiHV battery cell count 1-6S
• NiMH/NiCd battery cell count  1-15cells
• Pb battery voltage  2V-24V
• Weight     450g
• Dimension  102x120x46mm

Package includes:

• Charger EV-PEAK-AR1
• Power supply PU2
• Charging cable Dean
• DC Supply cable XT60
• Lipo Balancer board JST XH

EV Peak PU2 power supply 14.5A 350W 100-220V compatible with EV-PEAK-AR1 charger

The PU2 adopted a new circuit design, and by the skilled professionals with high standards of process meticulously, you can rest assured to use.
The switching power supply using household 100-240V/AC power supply,and will be converted to stable 24V DC power supply, can provide up to 14.5A of continuous output current.Please make sure that you read the instructions, warnings, and safety notes before using the PU2 for the first time.

Specification:

• AC Input voltage     100-240V
• Input AC Frequency     50-60Hz
• Output Voltage     24.0V DC±0.2V
• Output Current     14.5A±0.5A
• Current Overload Protection     ≥25A
• Output Voltage Ripple     200mV
• Power Efficiency     86%
• power Factor     0.98
• Over Temperarure Protection     ≥70℃
• Cooling Method     cooling Fan
• Weight     700g
• mensions(WxLxH)     101x129x54mm

EV-PEAK Para board allow parallel charge of up to 6 lipos 6S.

this board allow to charge up to 40amps Max, and it has XT60 connectors

The PU5 500W 15V 33A Ev Peak Power unit can deliver 33A under 15V AC. 

• Input voltage: 110-240V
• Output voltage: 15V
• Max power : 500W
• Max. Intensity : 33A
• Over-current protection: 36A
• Ventilation cooling
• Dimensions: 108x235x55mm Weight: 1300g