ERSA

Dry sponge made of wire nash for ERSA tool holder

Specification:
 

• Weight (g)   0,1

ERSA Extra Long-life soldering chisel-shaped tip 5.00mm with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   5.00
• Interior diameter of the shaft (mm):   6,6
• Exterior diameter of the shaft (mm):   8,5
• Total length (mm)   46,00
• Weight (g)   0,015

ERSA  professional soldering set, gas power, infinitely variable up to 75 W.
Comfortable piezo ignition. Operated with lighter gas.

Mobile power - wherever you may need it! Efficient,with a wide range of high quality accessories,
small, handy and a convenient packaging: this gas soldering set is very versatile! The ergonomic antistatic gas soldering iron with piezo ignition is the perfect tool for service and maintenance work - especially when there is no electric power supply available.
With its infinitely variable power rating from 15 up to 75 watts (compared with electrical soldering irons) max. soldering tip temperatures of 500°C can be achieved. The Independent 75 operates on commercially available butane lighter gas.
The Independent 75 „Basic Set“ is supplied in a practical transport case, consisting of a gas soldering iron with pre-installed catalytic soldering tip, a spare tip and a sponge container with cleaning sponge

In addition to the „Basic Set“, the Independent 75 „Profi Set“ includes another 2 soldering tips suitable for virtually every soldering application.
A hot blade to shape and cut high-resistance foam, a hot gas nozzle, a deflector to shrink heat-shrinkable sleeves and to solder SMD components as well as a flame nozzle to microweld complete the equipment and open up many different applications

Technical data:
Rating:15 - 75 W
Heating time: 183°C in appr. 30 sec.
Temperatures: soldering tip: appr. 500°C max.
flame nozzle: appr. 1,200° - 1,400°C
hot air nozzle: appr. 700°C
Weight:73 g
Ignition:piezo ignition, operates on butane gas
 

ERSA i-Tip Long-life soldering angled face tip 1.5mm with ERSADUR-LF coating for i-Tool soldering iron for i-CON soldering station:
0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT

Specification:

• Coating   long-life tip
• Shape of soldering tip:   angled face
• Soldering tip diameter / width (mm)   1,50
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   30,50
• Weight (g)   0,003

ERSA i-Tip Long-life soldering chisel-shaped tip 1.8mm with ERSADUR-LF coating for i-Tool sodlering iron (0100CDJ) for i-CON soldering station - version:
0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   1,80
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   35,00
• Weight (g)   0,003

ERSA Long-life soldering chisel-shaped 2.2mm tip with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   2,20
• Interior diameter of the shaft (mm):   6,60
• Exterior diameter of the shaft (mm):   8,50
• Total length (mm)   55,00
• Weight (g)   0,093

ERSA Permanent soldering chisel tip 0.4mm with coating ERSADUR-LF for i-Tool soldering iron for i-CON soldering station:
0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT.

ERSADUR SOLDERING BITS are created for continuous operation and high Quaility.
In a special procedure they are plated on galvanic way with an iron layer and are protected by an additional chrome layer before corrosion and oxidation.
Perfect warm transfer protects the radiator of the soldering iron against overheating and premature wear. ERSA offers an extensive program in Löt-and Entlötspitzen for i tool ERSA, i tool Pico and i tool Nano (Ersa i-Con soldering stations).
   

• Tip type for sold. irons with heating element    
• Tip shape    chisel    
• Tip dimensions    0.4mm    
• Applications of soldering equipment:
• for ERSA-0100CDJ soldering iron
• for ERSA-I-CON2 station
• for ERSA-I-CONPICO station
• Gross weight: 2.46 g

Digital soldering station with microprocessor control
ERSA RESISTRONIC temperature control
High initial power and fast heating
Very high heat output
High efficiency through internally heated Lotspitzen
Ergonomic soldering iron grip
Set the temperature between 150 ° C and 450 ° C
Programming of three fixed temperatures or two fixed temperatures with a standby temperature
Bar graph display, calibration and a power-off function


Soldering station Specifications

• Supply voltage: 230V / 50Hz
• Secondary voltage:24V AC
• Power:80W
• Control technology:ERSA RESISTRONIC
• Temperature range, infinitely variable:150 ... 459 ° C
• Control:LCD Display
• Lead:2m PVC
• Irons RT80
• Voltage:24V AC
• Power: 80W at 350 ° C
• Heating power:290W
• Heating time, approx .:40s at 20 ° C
• Soldering iron tip:842CD
• Weight (without cable), approxl:130g
• Lead:1.5 m, PVC

ERSA Tip Exchanger\n\nThis ESD-safe tool allows for quick and reliable replacement of all internally heated ERSA soldering tips and the 422-type desoldering inserts.
It incorporates an additional side cutter and screw driver allowing the multi-purpose use of this versatile tool.\n

• Weight (g)   0,076

ERSA Viscose cleaning sponge 55 mm x 55 mm for tool holders 0A09, 0A10, 0A13, 0A16, 0A24, 0A25, 0A28, 0A29, 0A30, 0A34, 0A35, 0A36, 0A39, 0A41, 0A42, 0A43, 0A44 and 0A45

Specification:

• Weight (g) 0,004
• Number of layers 2

Soldering iron RT 80 for the electronic temperature controlled soldering station RDS 80