Engine Starters

Align replacement spare part Power Control Board # HFSSTQ09

fits all Align starters- helicopter or Airplane. easy to replace electronic board

Specifications:

This is a replacement Align 6mm Super Starter Shaft, and is intended for use with the Align Super Starter system. This is the shaft only, and does not include the starter shaft spinner adaptor

Align starter Spinner Cup (For Airplane)

Airplane Spinner Cup x 1

Starter Rubber x 1

Starter shaft O-Ring x

Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.

• Suitable for up to 50cc gasoline engine or 300 class nitro engine.
• Designed for user replaceable, common 450 heli sized 3S1P 1900~2300mAh/16c lipo batteries.
• Fully charged battery is capable of 500 starts and beyond. Battery packs are charged with any T-REX 450 battery chargers.
• Starting adapter includes double one way bearing design.
• High efficiency motor providing high starting power, and low reacting force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery under-voltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.

Colors available are yellow and black, May vary depends on the stock

Battery not included:

Battery needed is :3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease.
Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.

• Suitable for up to 50cc gasoline engine or 300 class nitro engine.
• Designed for user replaceable, common 450 heli sized, 3S1P 1900~2300mAh/16c lipo batteries.
• Fully charged battery is, capable of 500 starts and beyond.
• Battery packs are charged with any, T-REX 450 battery chargers.
• Starting adaptor includes double one way bearing design.
• High efficiency motor providing high starting power, and low reacting, force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery undervoltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.
• Suitable battery:Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
• No load rotation speed:2300rpm
• Battery undervoltage:10.8V
• Quiescent current:0 mA
• Motor overheat protection:80°C
• Decelerate gear ratio:5.3:1
• Size:80x60x390mm
• Weight:700g (w/o battery)

Accessories:

• Starter body x 1
• Helicopter Starter Shaft x 1

Option:

• Battery:3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

This is the Align Airplane Super Starter. This convenient lightweight hand starter runs off LiPo battery power and features a simple one button start. Built into the starter are many smart electrical safety securities to keep you and your equipment safe, while an included case keeps the starter safe in storage. The charger is suitable for 50cc engines or 300 class nitro engines.

• Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.
• Suitable for up to 50cc gasoline engine or 300 class nitro engine.
• Designed for user replaceable, common 450 heli sized 3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is capable of 500 starts and beyond.
• Starting adaptor includes two piece one way bearing design.
• High efficiency motor providing high starting power, and low reacting
• force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery undervoltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.

Specifications:

Suitable battery: Li-Po 3S1P 11.1V 1900~2300mAh 16C and above (maximum size 112x35x24mm)
No load rotation speed: 2300rpm
Battery undervoltage: 10.8V
Quiescent current: 0 mA
Motor overheat protection: 80°C
Decelerate gear ratio: 5.3:1
Size: 80x60x390mm
Weight: 700g (w/o battery)

Includes:

• (1) Starter body
• (1) Airplane starting adapter

Requires:

Battery: 3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

The Sullivan Dynatron is probably the most strongest started in the world. Heavy-Duty, Super High-Torque 12- 24V input Starter
that will Start All Model Engines, Including 1/4 Scale.

FEATURES:

• Super High-Torque 12V or 24V
• Starts All Model Engines, from .09 to 100cc
• "Instant-On" Fingertip Control Switch
• Full Protection Hand-Guard for Extra Safety
• Standard grey rubber reversible insert
• Aluminum pulley groove drive cone
• Front plate guard adaptable for left handed use
• Two year warranty
• 46" wire lead (not coiled)

INCLUDES:

• One Dynatron Super Power Starter w/Aluminum V-Groove Drive Cone
• Two Alligator Clips with red and black plastic sleeves
• Instruction sheet and warranty card

Ergonomically designed for optimal hand grip to prevent slippage, light  weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button. Suitable for up to 50cc gasoline engine or 300 class nitro engine.

Designed for user replaceable, using 3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is capable of 500 starts and beyond. Battery packs are charged with any T-REX 450 battery chargers. Starting adapter includes double one way bearing design.

• High efficiency motor providing high starting power, and low reacting force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery under-voltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.
• Suitable battery: Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
• No load rotation speed:2300rpm
• Battery under-voltage:10.8V
• Quiescent current:0 mA
• Motor overheat protection:80°C
• Decelerate gear ratio:5.3:1
• Size:80x60x390mm
• Weight:700g (w/o battery)
• Starter body x 1
• Airplane spinner cup x 1

Glow Starter with Meter for Sub-C Battery (Battery not included)

This is a glow starter with aluminum case suitable for most methanol/nitro glow engines.

Specs:

• Battery Size: Sub-C/SC NiMH (sold separately)
• Length (total): 148mm
• Diameter: 26.5mm
• Weight: 61.5g (without battery)

Not included - Sold separately:

• Sub-C NiMH battery cell
• Charger

Allows your starter to be used for Airplanes as well as Helis! For use with the KSJ239 Hex Shaft kit.

Replacement part for Starter extension, 8mm. Made in Japan

A low cost fully featured power panel with adjustable glow plug current and ammeter. Supplied with battery connectors and leads plus matching banana plugs for your glow clip, fuel pump and starter.

Suitable for installation in a start box as a central supply and switching point:

• 12V for connection of the e-starter or. Craft pump
• Single-off/on switch for pump
• continuously adjustable Glow plug power current with display
• A 12 V battery of corresponding capacity is required for power.
• Pump not included
  

Multi-Function Power Panel w/pump, Glow Clip Out With Current Adjust, 12v Starter Out

Basic features:

• Powered by 12V battery
• 1.5V spark plug glow output with smooth current regulation, meter and switch
• built-in fuel pump with direction switch (filling/draining) for methanol-based fuels
• 12V output for starter
• included: 3 pairs of banana connectors (black and red for all panel connectors) and one pair of crocodile clips

ROBBE helicopters Starter extension with Hex shaft Round and flat end

Starter Cone Rubber replacement insert

Color may vary from yellow to white( stock dependent)

Starter Shaft extension with One-way hub, easy insert, Blue color

This is a Sullivan 6mm Helicopter Starter Extension Kit. Made for use with 6mm socket helicopters, this extension fits all Sullivan starters (except the Hornet), and features a custom hex drive for maximum torque transfer without strip out, an oversized one way clutch and a single oversized thrust bearing. The precision aluminum clamps provide true running performance. Tool free disassembly. Also fits in 1" starter insert for quick mounting. Overall length 12" . Quickly disassembles for transport.

Features:

• Removable extension shaft
• Machined aluminum housing
• Oversized thrust bearing
• Oversized one way clutch

Sullivan Products RC Airplane Starter Rubber Adapter Deep Cone

This is a silicone rubber adapter for either the Sullivan Deluxe or Dynatron starters. It is made for long spinners and has excellent grip and excellent life.
Color can be Blue or gray, stock dependent.

Key Features
Long hardened steel construction with 7/32 hex size shaft with ball tip and 2 aluminum mounting collar

Overview
The hardened steel ball drive fits all Tiger Drives. The aluminum adapter fits most hand held starters, including Sullivan Hi-Tork and Dynatron.

The Validus GRS is our biggest engine starter yet! Professional starter for large engines up to 350cc. It features a 3" Aluminum Nose Cone, silicone insert, and HD 6 gauge wire with standard battery post connections. Double handle grips molded to fit the shape of your hand.

1-3/4 hp provides huge starting power

• Stall torque is 225 inch-pounds or 3600 in-oz
• 4000 no load rpm
• Maximum current draw is 600A
• CCW (Normal) Engine Rotation

Super Starter Starter Rubber

The Megatron Starter. An awesome starter for the modern range of large high performance RC engines. This starter is designed for years of flawless service. It can handle engines up to 80 cc or 4.90 ci, depending on engine condition and compression ratio.

This starter features 3″ aluminum cone, 3″ silicone rubber insert, double steel handles and front ball bearing.
The S651 Megatron Super Duty Starter can be operated at 12 or 24 Volts.
Output 600 in-oz of torque on 12 Volts, 1200 in-oz of torque on 24 Volts. 280 no load RPM.
Maximum current draw 100 Amps at 12 V.

Convenient, economical, pistol-sized, Li-Po glow ignitor. Includes Li-Po 1S 1200mAh battery (easily charged with additional micro USB lead).

Features:

• High-tech regulator application, output voltage is 1.5V
• Switching transfer with low heat dissipation
• Large LCD shows battery status
• Fits any glow plugs within new 4-cycle plugs