Electric cars

Car Kit 4X4 Multifunction Robot - Complete With UNO Control Board

The BX8 RUNNER is a 1/8 4x4 radio controlled buggy of the French Hobbytech brand, designed and developed in France. The BX8 Runner is a buggy with a charcoal engine, it comes in RTR version ready to use with a Nimh battery and a charger.

BX8 Runner Technical Specifications :
KONECT KT2S 2.4GHz Steering Wheel Radio
Battery KONECT 1800mAh 7.2V NiMh
KONECT 550 16T engine
Servo KONECT 7Kg .18s
KONECT 40Amp Charcoal Controller
Waterproof Inbox
"Anti flex" aluminum central transmission tube
Metal front and rear differentials
Metal center differential gear wheels
Engine mount adjustable machined aluminum
Adjustable aluminum machined steering bar
Fully mounted on ball bearings
Fully mounted on reverse rods
Metal CVD front and rear gears
Max. Height 175 mm
Wheelbase: 322 mm
Track (front): 306 mm
(rear) channel max. 310 mm
Front ground clearance: 54 mm
Rear ground clearance: 56 mm
Total weight: 2180 gr

Hobbytech BX8 Runner Kit contents :
Buggy BX8 Runner
KONECT Minh USB charger
NiMh 1800 mAh battery
KONECT 2.4GhZ radio system

Equipment required (not included) :
4 R6 batteries

HOBBYTECH 1/10 RTR Brushless Buggy 4WD Hobbytech BXR.S1 - HT-BXR.S1.RTR

Our new BXR-S1 is a totally new platform, its chassis structure has been thought and designed to be capable to compete at the pro level.

When we designed this new car, we were thinking « how to make a 1/8 scale resistant buggy layout into a smaller scale? ». The BXR-S1 is this result.

And, as you can see, it is very similar to the current 1/8th buggy’s setting-up.

Disclosing from the box, a front and rear differential and an adjustable center slipper equipped with big bore fully aluminium shocks, steel front CVD’s and steel dog bones transmission.

A strong aluminium chassis and high racing sides guards guarantee the car a very high durability. A waterproof 50Amp esc and a high speed sensorless 3652 4600kv provide to the car an incredible speed potential. We even include a Lipo 2200 7,4V battery and charger. Just add 4pcs AA batteries for the transmitter and race it !

Simply the best RTR brushless car in the market !

Dimensions

Height : 148 mm

Wheelbase : 273 mm

Front width : 248 mm

Rear width : 248 mm

Front ride height : 48 mm

Rear ride height : 48 mm

Weight : 1625 g.

Brushless Konect ESC 50A Waterproof KN-10BL50-WP Specs:

Specific 1/10 cars Brushless ESC

Sensorless brushless motors capable

Continue current : 50 Amp

Burst current : 300 Amp

Resistance : 0.0010 Ω

Max motor limit : 5500Kv (2S) and 3500Kv (3S)

NiMh input : 5 to 9 cells

LiPo input : 2 or 3 cells (max 11.1V)

BEC : 6v/3 Amp

Dimensions : 48.5x38x32mm

Weight : 90g

Over-heat protection

Programmable with Program Card (not included)

DEANS plug

Brushless 1/10 Motor Konect KN-3652SL-4600 4600 Kv Specs:

8.4V Ni-MH and 2S Li-Po capable

Dimensions : Φ=36mm – L=52mm

Shaft : Φ=3.175mm – L=15mm

Resistance : 0,0059 Ω

Poles: 4

Amp : 3,9A

Weight: 200 g

Inside the box :

 1/10th BRX.S1 Buggy RTR version with stickered body

 KT2S+ radio system

 220V AC 500 mAh charger

 7.4V 2200mAh Li-Po battery

Instruction manual

Not included :

LR6 (AA) batteries (4 pcs)

R/C specifics tools

HOBBYTECH - 1/8 BUGGY RTR BX8 RUNNER ORANGE TYPE SL BRUSHED 1.SL.BX8.RUNNER-O

The BX8 RUNNER

is a 1/8 4x4 radio controlled buggy of the French Hobbytech brand,  designed and developed in France. The BX8 Runner is a buggy with a charcoal engine, it comes in RTR version ready to use with a Nimh battery and a charger.

BX8 Runner Technical Specifications :
KONECT KT2S 2.4GHz Steering Wheel Radio
Battery KONECT 1800mAh 7.2V NiMh
KONECT 550 16T engine
Servo KONECT 7Kg .18s
KONECT 40Amp Charcoal Controller
Waterproof Inbox
"Anti flex" aluminum central transmission tube
Metal front and rear differentials
Metal center differential gear wheels
Engine mount adjustable machined aluminum
Adjustable aluminum machined steering bar
Fully mounted on ball bearings
Fully mounted on reverse rods
Metal CVD front and rear gears
Max. Height 175 mm
Wheelbase: 322 mm
Track (front): 306 mm
(rear) channel max. 310 mm
Front ground clearance: 54 mm
Rear ground clearance: 56 mm
Total weight: 2180 gr

Hobbytech BX8 Runner Kit contents :
Buggy BX8 Runner
KONECT Minh USB charger
NiMh 1800 mAh battery
KONECT 2.4GhZ radio system


Equipment required (not included) :
4 R6 batteries

Powerful 1/8 size car, equipped with Brushless motor.

Desert Buggy configuration, fast, stable and with good maneuverability.

In line with the new 1/8 scale brushless buggies, the DB8SL has a featherweight 2660g and an ultra-powerful drivetrain. In fact, the KONECT 2750Kv brushless motor coupled to the 80 amp SCP WP controller can be powered by a 3S (11.1v) Li-Po battery to exploit the full power of this racing car.
This "Super Light" buggy is no less solid: aluminum front and rear shock absorbers, aluminum hydraulic shock absorbers, front and rear metal differentials, metal CVD front joints, waterproof box, etc. .
And the icing on the cake: this car comes fully assembled with a 2.4GHz remote control, a 3S Li-Po battery and a 2/3S Li-Po charger.

A real package ready to roll, powerful, reliable and with an ultra tight price. Well done HOBBYTECH!

INCLUDED:

KONECT "LIPO220" 2 / 3S Li-Po charger

KONECT 3S1P 3600mAh Li-Po 11.1V 1P 30C battery

KONECT 80Amp SCT WP 2-3S Li-Po Controller

New KONECT 2750Kv brushless motor size 3660

KONECT 2.4GHz radio system (KT2S + radio with receiver)


FEATURES:

New triangulation

New body color

New rear fender "Mud Flaps"

Fully aluminum hydraulic shock absorbers.

Waterproof input tray

"Anti flex" aluminum central transmission tube

LED front and rear lights.

Metal front and rear differentials.

Metal center differential gears

Adjustable machined aluminum motor mount.

Adjustable machined aluminum steering bar

Aluminum front and rear shock mounts.

Front and rear stabilizer bar

Fully mounted on ball bearings.

Fully mounted on reverse rods.

Metal front CVD gears

Easy maintenance with easy opening of the bodywork.

DIMENSIONS:

Maximum height. : 175mm

Wheelbase: 323 mm.

Front channel max. : 327mm

Maximum rear track: 314 mm

Front ground clearance: 58 mm.

Rear ground clearance: 58 mm.

Total weight: 2660 gr

need to function:

AA batteries (4) for the transmitter

Included:

Charger 'LIPO220' 2 / 3s Li - Po

Lipo 3s 1 p 40 c 11.1V 4200mAh battery

Controller KONECT 80Amp SCT WP 2 - 3s Lipo

KONECT 2750Kv 3660 size brushless motor

KONECT 2.4 GHz radio system (transmitter KT2S + receiver)

features:

Fully hydraulic dampers aluminium

Inbox waterproof

Transmission tube central year aluminium "anti flex.

Front and rear differentials in metal

Central differential metal sprockets

Adjustable engine support machined aluminum

Adjustable steering machined aluminum bar

Support of front and rear bumpers aluminum

Front and rear anti-roll bar

Completely mounted on ball bearings

Fully mounted on rods to reverse not

Front cardan type CVD metal

Dimensions:

Maximum height. : 175 mm

Wheelbase: 323 mm

Track before maxi. : 327 mm

Maximum rear track. : 314 mm

Guard to the ground before: 58 mm

Guard back ground: 58 mm

Total weight: 2660 g

The latest evolution of the French brand Hobbytech racing buggy. The Spirit NXTE RR21 is always the best price/quality ratio of the 1/8th brushless competition kits.

Its original equipment, its quality of French manufacture (for many parts) and its performances will allow you to compete with the biggest brands in this category. So, don’t hesitate, let yoursel be tempted!

New not painted bodyshell (#CA-294) made in France from 1mm Lexan with the new aerodynamic front nose ;

New 7075 T6 hard treated aluminium 4mm chassis plate made in France ;

New hard treated centers universal driveshaft ;

New front and rear aluminium shock tower reinforcements manufactured in France ;

New 7075 T6 aluminium front top plate made in France ;

New 7075 T6 hard-treated aluminium arms holders manufacturated in France ;

Reinforced ball front arms system and rear arms with integrated mudguards ;

2-part motor mount, optimizing motor fixation and pinion adjusting ;

Shock absorbers with 15mm body treated ;

Front and rear 5mm carbon fiber shock absorber tower ;

Servo holder plate in carbon fiber ;

Steering servo horn in aluminium ;

Front, rear and center hard-treated steel transmission complety set ;

Rear “Flex” chassis reinforcement in 7075 T6 hard treated aluminium ;

All drive cups are reinforced and lightweight, racing steel quality ;

Hard treated front and rear universal driveshaft ;

Battery holder capable for 2x2S or 4S batteries ;

ESC mount plate in carbon fiber : ESC “flexible” assembled ;

Easy maintain for the central differential from above with half-shell system.

Delivered as a kit to be assembled, the buggy alone. (Refer to the manuel to provide the accessories and tools necessary for its final use)

Characteristic:

Fully licensed Suzuki Jimny JB74 body shell

2.4 GHz Tx transmitter with Smart Throttle '1-2-3' function

1-inch scale wheels and soft off-road tires

Highly detailed body arches, grille and wheels

Ladder chassis and multi-position dampers

High torque motor and protection circuit

power of high torque true hobby grade

LiPo ready ESC variator with descent brake

The kit contains:

RTR - Just charge NiMH and use

Transmitter CTX 2000 2.4GHz FHSS

KD PROPO ESC/RX Ports With FPV and LED

NiMH battery and USB charger

Detailed manual and parts list

4 AA batteries for the transmitter

Velcro and body mounts without clips

The call of the wild

The need to explore and to discover new locations, to respect and be at one with nature, leads more and more people to go 'Off Grid' and escape the urban 95 lifestyle. Carisma Scale Adventure now offers RC fans with a thirst for this, the opportunity to do so in 1/10th scale, and ready for anything the journey may throw at them along the way!

The Prairie Wolf LWB Adventure Van exudes 'Off Road Adventure'. With scale details like a LEDReady Grille, Robust Wing Mirrors and a Rear Panel Roof Access Ladder, the body looks the part straight from the box, but still has has enough scope for additional detailing. Add a Roof Rack, Luggage, Spare Wheels & Tyres, Spotlights, a Full Interior, just like every other CSA release so far, the possibilities are truly limitless.

Vacuum Formed in a thicker than standard Lexan for additional rigidity, the body comes prepainted and adorned with a retro Off Road inspired livery. The body aside, the 324mm Wheelbase rig is fully 2.1 Spec and including our CMS Mount, offering a Forward Weight Bias that combined with the new ATT Transmission and 95mm ATSS Soft Compound Tyres aids Rock Crawling. We also addressed the issue of Torque Twist with our new ATT (Anti Torque Twist Transmission), neutralising Torque Twist and keeping the wheels firmly planted (and generating grip).

We have also lowered the gear ratio in the transmission to 5.92:1 giving a smoother low RPM range and greater finesse and control. To compliment this we have introduced a new Sealed Can 17T 5 Pole Motor, with the greater magnetic force over a 3pole motor, thus offering enhanced Torque and Throttle Finesse. But it's not all about Crawling, the 17T motor has the ability to still produce wheel speed when required, for trail running. Being a sealed can, the motor will be more weather resistant and require minimal maintenance between runs, a must for all Scale Adventurists.

FEATURES

CMS Mount For Improved Weight Bias

ATT (Anti Torque Twist) Transmission

New Lower 14,83 (5.92:1) Gear Ratio

Highly Detailed Adventure Van Body

Optional Winch Ready Front Bumper

Soft Compound ATSS All Terrain Tyres

Front CVD's & Robust Steel Driveline

1.9 Beadlock Wheels & Foam Inserts

9kg High Torque Metal Geared Servo

LiPo Safe ARC1 ESC w Crawler Mode

New 5 Pole 17t Brushed Crawler Motor

IN BOX

Van Body Supplied PrePainted

RTR – Just Charge NiMH Pack & Run

2.4GHz F.H.S.S Transmitter/Receiver

NiMH Pack & Safe USB Slow Charger

Detailed Instruction Manual & Parts List

Optional LED Light Buckets

4 AA Cells For Transmitter Included

Wing Mirrors Supplied Ready To Fit

Supplied With Injection Moulded Body Accessories

Fully Loaded With 2.1 SCA1E Spec Innovation

A New Approach To Overland Scale Adventures

Descriptions:

KONECT waterproof special crawler drive

Radio KT3S+ 3-way KONECT

Transmission system 2 speeds with servo included

Quick access to transmission system

Engine size 540 55T High power

1.9" CLIMBER 121/45mm wheels on black rims

Steering servo waterproof 21kg KONECT

Variable Waterproof Special Crawler Konect

Battery Li-ion Konect 1700 mah

USB type charger

Front and rear rigid decks

Adjustable all-aluminum shock absorbers

Front and center steel articulated gimbals

Quick access to transmission system

Suspension bridge on 4 metal articulated arms

SMD-type servo mounting on chassis to avoid angle variations

2-speed transmission (slow and fast)

System for the selection of 2 speeds with a servo

1.5mm C-spar chassis for even more rigidity

Super realistic steel step (weight optimization)

Advanced motor and battery position to improve crossing

Fully assembled with ball bearings

Waterproof receiver box with specific seal

1.9" CLIMBER 121/45mm wheels on black rims

Survival body painted with all scale-look accessories

Realistic bumpers equipped with shackles

Fastening system for all types of batteries

INCLUDED IN THE KIT TO BE MOUNTED:

Lexan body to paint with Scale accessories

Tires on BEDLOCK rims 1.9

Gearbox with its selection servo

Special engine Crawler 55T

Grease, oil and net brake for mounting

Size:

Length: 525mm

Width (AV/AR): 253mm

Height: 245mm

Ground clearance: 40mm

Wheelbase: 324mm

Weight: 2450g (without battery)

Damper length (AV/AR): 95mm

Rims (AV/AR): 48x25mm

Tyres (AV/AR): 121x45mm

Hexagon of wheels: 12mm

Chassis spec: Chassis Double steel spars thickness 1.5mm

Transmission: Gearbox (slow and fast) with selection servo

Sprocket type: 48dp

Required (not included):

4 * AA batteries for remote control

Main Technical Specifications

Full Carbon Fibre Race Chassis, Aircraft Grade Alloy and Composite Components.

Unique front bulkhead design for multiple set ups and ease of on-the-fly tuning.

Rear pivot pod with innovative side shock sliders and optional Dual-Stage Suspension.

Every aspect of the geometry is fully adjustable to dial in any track condition.

Real world tested. No theoretical, No simulation, Race proven.

Front End Innovations

Adjustable Castor 0-14 deg by changing 1 shim

Adjustable Camber -3 to (as much positive as you want) by adding shims

Adjustable Ride Height by changing shims under front end assembly

Metal Pivot balls for increased durability and smooth movement

Aluminium upper arm mounts

Built in reactive castor (5 degrees) for increased steering

Durable steering blocks with 2 steering link mounting positions

Adjustable roll centre by adding shims under top arms

Extra long front wheel axles to allow a multitude of wheels/tyres to fit

Easily Adjustable front width

Industry STD front springs on the king pins

Adjustable Ackermann settings – 3 positions from the kit.

Front brace helps support the front end and increases front to rear chassis stiffness

M4 screws used to mount the front end assembly into sturdy aluminium mounts for maximum durability

Castor mount supports the front end to reduce chances of tweak on impacts

Dual Ballraced single pivot aluminium steering bellcrank

2 Wheelbase settings using the same parts

Steering lock stops

1 piece stiff lower suspension arm – more steering and less chance of tweak

Accepts all ETS allowed wings and others

Rear End Innovations

Increased centre pivot angles allow huge pod movement – huge advantage on bumpy tracks and curb riding.

Lightweight 2 piece aluminium bulkheads

Ride height adjustable via shims under the aluminium bearing holders.

Smooth durable ball differential with thrust race built in

Accepts all 14mm hex wheels

4 screw option for holding the motor in place, extra durability if required.

Increased motor cooling due to the open pod design

Carbon Rear wing mount with multiple height positions for fine tuning the handling to the wing you choose.

Carbon brace under rear axle – increase durability

Accepts all ETS allowed wings and others

NOT INCLUDED

Brushless Motorization (recommended combo: KN-40-540-1800-FUS)

Or Brushed (recommended ESC and motor: KN-BRUSH40-CRAWBT and KN-M5540-55T)

Servo (recommended: KN-2113LVWP)

Battery (recommended: KN-LP2S5200)

Charger (recommended: KN-MULTI60-PLUS)

Radio and Receiver (recommended: KN-KT3S-PLUS-SET)

New features

New adjustable wheelbase chassis

New anti-torque twist transmission box

New WOLF SHOCKS aluminum shocks (droop and semi-droop)

New realistic steel-treated central drive shafts

New front and rear bridges

New front steering arms with 0° Ackerman angle

New steering arm holders with PANHARD support

New front and rear suspension links

New multi-position battery support

New shock supports

New CMS plate (servo mount on chassis)

New central stiffening bars

The CRX 18 is a 1/18th reproduction of the CRX: the emblematic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central gearbox (positioned slightly forward) with a motor in the low position and 2 bridges which are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the foredeck (AMS assembly). The motorization is entrusted to a micro coal motor of 55T.

In terms of electronics, the CRX18 is equipped with an all-in module (receiver – ESC) which has 9 sockets to connect a complete ignition system with turn signals and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S of 600 mAh which allows you to drive for several hours.

Aesthetically, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those fitted to the CRX2. The body has the same grille and the same accessories (jerrican, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the running boards are equipped with a slot in which the lower bodywork is housed so as not to damage it on obstacles.

Many options will be available to improve the performance or the look of the CRX18: ball bearings, hydraulic shock absorbers…

The CRX18 allows you to ride indoors or outdoors. Both small and large spaces suit it perfectly. His crossing abilities are impressive. On the rocks: its lightness, its balance and the efficiency of its tires allow it to overcome incredible obstacles. The radio allows you to adjust the limit switches (gas and direction). The throttle setting allows you to refine your steering and adapt the speed of the CRX18 to the terrain and obstacles.

Content of the box :

• CRX18
• Transmitter
• Battery 600 mah 2S
• USB charger

Not included :

• 4 LR6 (AA) type batteries
• Various modeling tools

Dimensions :

Wheelbase: 153.7mm

Total length: 257mm

Width: 123.8mm

Height: 120.60mm

Ground clearance at the gearbox: 39.70 mm

Ground clearance at axles: 17.1mm

Forward angle of attack: 58.60°

Aft angle of attack 56.10°

Hobbytech crawler CRX18 combo 4 colors

• CRX18 Blue
•  CRX18 Grey
•  CRX18 Orange
•  CRX18 White

The CRX 18 is a 1/18th reproduction of the CRX: the emblematic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central gearbox (positioned slightly forward) with a motor in the low position and 2 bridges which are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the foredeck (AMS assembly). The motorization is entrusted to a micro coal motor of 55T.

In terms of electronics, the CRX18 is equipped with an all-in module (receiver – ESC) which has 9 sockets to connect a complete ignition system with turn signals and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S of 600 mAh which allows you to drive for several hours.

Aesthetically, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those fitted to the CRX2. The body has the same grille and the same accessories (jerrican, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the running boards are equipped with a slot in which the lower bodywork is housed so as not to damage it on obstacles.

Many options will be available to improve the performance or the look of the CRX18: ball bearings, hydraulic shock absorbers…

The CRX18 allows you to ride indoors or outdoors. Both small and large spaces suit it perfectly. His crossing abilities are impressive. On the rocks: its lightness, its balance and the efficiency of its tires allow it to overcome incredible obstacles. The radio allows you to adjust the limit switches (gas and direction). The throttle setting allows you to refine your steering and adapt the speed of the CRX18 to the terrain and obstacles.

Content of the box :

• CRX18
• Transmitter
• Battery 600 mah 2S
• USB charger

Not included :

• 4 LR6 (AA) type batteries
• Various modeling tools

Dimensions :

Wheelbase: 153.7mm

Total length: 257mm

Width: 123.8mm

Height: 120.60mm

Ground clearance at the gearbox: 39.70 mm

Ground clearance at axles: 17.1mm

Forward angle of attack: 58.60°

Aft angle of attack 56.10°

The new Flat Cage version of the CRX18 retains the features of the CRX18 but is differentiated by its rear plate equipped with a roll cage and a spare wheel. Other realistic accessories also complete this model. The cage version is slightly shorter and the rear plate allows for a greater angle of attack. The CRX18 flat cage is available in sand and silver colors.

The CRX 18 is a 1/18th scale reproduction of the CRX: the iconic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central transmission box (positioned slightly forward) with a low-positioned engine and 2 bridges that are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity to the maximum, it is located on the front bridge (AMS mount). The motorization is entrusted to a 55T micro carbon motor.

In terms of electronics, the CRX18 is equipped with a all-in-one module (receiver - ESC) that has 9 plugs to connect a complete ignition system with blinkers and brake lights. By default, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S 600 mAh that allows to drive for several hours.

In terms of aesthetics, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those that equip the CRX2. The bodywork has the same grille and the same accessories (jerrycan, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the footrests are equipped with a slot in which the bottom of the bodywork is lodged to avoid damaging it on obstacles.

Many options will be available to improve the performance or look of the CRX18: ball bearings, hydraulic shock absorbers...

The CRX18 can be driven indoors or outdoors. Small spaces as well as larger spaces suit him perfectly. Its crossing capabilities are impressive. On rocks: its lightness, its balance and the efficiency of its tires allow it to overcome incredible obstacles. The radio allows to adjust the end stops (throttle and direction). The throttle adjustment allows to refine the driving and to adapt the speed of the CRX18 according to the terrain and obstacles.

Included in the box:

CRX18

Transmitter

600 mAh 2S battery

USB charger

Dimensions:

Wheelbase: 153.7 mm

Total length: 241.50 mm

Width: 123.8 mm

Height: 120.60 mm

Ground clearance at the transmission box level: 39.70 mm

Ground clearance at the bridge level: 17.1mm

Front angle of attack: 59°

Rear angle of attack 76.9°

The new Flat Cage version of the CRX18 retains the features of the CRX18 but is differentiated by its rear plate equipped with a roll cage and a spare wheel. Other realistic accessories also complete this model. The cage version is slightly shorter and the rear plate allows for a greater angle of attack. The CRX18 flat cage is available in sand and silver colors.

The CRX 18 is a 1/18th scale reproduction of the CRX: the iconic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central transmission box (positioned slightly forward) with a low-positioned engine and 2 bridges that are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity to the maximum, it is located on the front bridge (AMS mount). The motorization is entrusted to a 55T micro carbon motor.

In terms of electronics, the CRX18 is equipped with a all-in-one module (receiver - ESC) that has 9 plugs to connect a complete ignition system with blinkers and brake lights. By default, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S 600 mAh that allows to drive for several hours.

In terms of aesthetics, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those that equip the CRX2. The bodywork has the same grille and the same accessories (jerrycan, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the footrests are equipped with a slot in which the bottom of the bodywork is lodged to avoid damaging it on obstacles.

Many options will be available to improve the performance or look of the CRX18: ball bearings, hydraulic shock absorbers...

The CRX18 can be driven indoors or outdoors. Small spaces as well as larger spaces suit him perfectly. Its crossing capabilities are impressive. On rocks: its lightness, its balance and the efficiency of its tires allow it to overcome incredible obstacles. The radio allows to adjust the end stops (throttle and direction). The throttle adjustment allows to refine the driving and to adapt the speed of the CRX18 according to the terrain and obstacles.

Included in the box:

CRX18

Transmitter

600 mAh 2S battery

USB charger

Dimensions:

Wheelbase: 153.7 mm

Total length: 241.50 mm

Width: 123.8 mm

Height: 120.60 mm

Ground clearance at the transmission box level: 39.70 mm

Ground clearance at the bridge level: 17.1mm

Front angle of attack: 59°

Rear angle of attack 76.9°

New version 6WD and Flat Cage: The CRX18 6WD flat cage retains the features of the CRX18 but with 2 additional drive wheels. The CRX18 6WD offers new horizons and new possibilities for driving. It also differs by its rear plate equipped with a roll cage and a spare wheel. Other realistic accessories also complete this model.

The CRX 18 is a 1/18th scale reproduction of the CRX: the iconic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central transmission box (positioned slightly forward) with a low-positioned engine and 2 bridges that are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the front bridge (AMS mount). The motorization is entrusted to a 55T micro carbon motor.

In terms of electronics, the CRX18 is equipped with an all-in-one module (receiver - ESC) that has 9 connectors for connecting a complete lighting system with blinkers and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S 600 mAh which allows to drive for several hours.

In terms of aesthetics, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those that equip the CRX2. The bodywork has the same grille and the same accessories (jerrycan, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the footpegs are equipped with a slot in which the bottom of the bodywork is housed to avoid damage on obstacles.

Many options will be available to improve the performance or look of the CRX18: ball bearings, hydraulic shock absorbers...

The CRX18 can be driven indoors or outdoors. Small spaces as well as large spaces suit him perfectly. Its crossing capabilities are impressive. On rocks: its lightness, its balance and the efficiency of its tires allow it to cross incredible obstacles. The radio allows to adjust the end of the stroke (throttle and direction). The throttle adjustment allows to refine the driving and to adapt the speed of the CRX18 according to the terrain and obstacles.

Included in the box

CRX18

Transmitter

600 mAh 2S battery

USB charger

Dimensions

Wheelbase: 155.20 mm + 65.7 mm

Total length: 298.20 mm

Width: 123.8 mm

Height: 120.60 mm

Ground clearance at transmission level: 39.70 mm

Ground clearance at bridge level: 17.1mm

Front attack angle: 59°

Rear attack angle 76.9°

New version 6WD and Flat Cage: The CRX18 6WD flat cage retains the features of the CRX18 but with 2 additional drive wheels. The CRX18 6WD offers new horizons and new possibilities for driving. It also differs by its rear plate equipped with a roll cage and a spare wheel. Other realistic accessories also complete this model.

The CRX 18 is a 1/18th scale reproduction of the CRX: the iconic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central transmission box (positioned slightly forward) with a low-positioned engine and 2 bridges that are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the front bridge (AMS mount). The motorization is entrusted to a 55T micro carbon motor.

In terms of electronics, the CRX18 is equipped with an all-in-one module (receiver - ESC) that has 9 connectors for connecting a complete lighting system with blinkers and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S 600 mAh which allows to drive for several hours.

In terms of aesthetics, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those that equip the CRX2. The bodywork has the same grille and the same accessories (jerrycan, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the footpegs are equipped with a slot in which the bottom of the bodywork is housed to avoid damage on obstacles.

Many options will be available to improve the performance or look of the CRX18: ball bearings, hydraulic shock absorbers...

The CRX18 can be driven indoors or outdoors. Small spaces as well as large spaces suit him perfectly. Its crossing capabilities are impressive. On rocks: its lightness, its balance and the efficiency of its tires allow it to cross incredible obstacles. The radio allows to adjust the end of the stroke (throttle and direction). The throttle adjustment allows to refine the driving and to adapt the speed of the CRX18 according to the terrain and obstacles.

Included in the box

CRX18

Transmitter

600 mAh 2S battery

USB charger

Dimensions

Wheelbase: 155.20 mm + 65.7 mm

Total length: 298.20 mm

Width: 123.8 mm

Height: 120.60 mm

Ground clearance at transmission level: 39.70 mm

Ground clearance at bridge level: 17.1mm

Front attack angle: 59°

Rear attack angle 76.9°

The CRX 18 is a 1/18th reproduction of the CRX: the emblematic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central gearbox (positioned slightly forward) with a motor in the low position and 2 bridges which are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the foredeck (AMS assembly). The motorization is entrusted to a micro coal motor of 55T.

In terms of electronics, the CRX18 is equipped with an all-in module (receiver – ESC) which has 9 sockets to connect a complete ignition system with turn signals and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S of 600 mAh which allows you to drive for several hours.

Aesthetically, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those fitted to the CRX2. The body has the same grille and the same accessories (jerrican, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the running boards are equipped with a slot in which the lower bodywork is housed so as not to damage it on obstacles.

Many options will be available to improve the performance or the look of the CRX18: ball bearings, hydraulic shock absorbers…

The CRX18 allows you to ride indoors or outdoors. Both small and large spaces suit it perfectly. His crossing abilities are impressive. On the rocks: its lightness, its balance and the efficiency of its tires allow it to overcome incredible obstacles. The radio allows you to adjust the limit switches (gas and direction). The throttle setting allows you to refine your steering and adapt the speed of the CRX18 to the terrain and obstacles.

Content of the box :

• CRX18
• Transmitter
• Battery 600 mah 2S
• USB charger

Not included :

• 4 LR6 (AA) type batteries
• Various modeling tools

Dimensions :

Wheelbase: 153.7mm

Total length: 257mm

Width: 123.8mm

Height: 120.60mm

Ground clearance at the gearbox: 39.70 mm

Ground clearance at axles: 17.1mm

Forward angle of attack: 58.60°

Aft angle of attack 56.10°

The CRX 18 is a 1/18th reproduction of the CRX: the emblematic model of our brand.

The mini is designed as a 1/10th scale: metal beam chassis, central gearbox (positioned slightly forward) with a motor in the low position and 2 bridges which are each connected to the chassis by 4 links.

The micro steering servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the foredeck (AMS assembly). The motorization is entrusted to a micro coal motor of 55T.

In terms of electronics, the CRX18 is equipped with an all-in module (receiver – ESC) which has 9 sockets to connect a complete ignition system with turn signals and brake lights. Originally, the CRX is equipped with 2 LED headlights that can be controlled via the radio control. Finally, the battery is a 2S of 600 mAh which allows you to drive for several hours.

Aesthetically, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those fitted to the CRX2. The body has the same grille and the same accessories (jerrican, snorkel, wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. Nice little detail: the running boards are equipped with a slot in which the lower bodywork is housed so as not to damage it on obstacles.

Many options will be available to improve the performance or the look of the CRX18: ball bearings, hydraulic shock absorbers…

The CRX18 allows you to ride indoors or outdoors. Both small and large spaces suit it perfectly. His crossing abilities are impressive. On the rocks: its lightness, its balance and the efficiency of its tires allow it to overcome incredible obstacles. The radio allows you to adjust the limit switches (gas and direction). The throttle setting allows you to refine your steering and adapt the speed of the CRX18 to the terrain and obstacles.

Content of the box :

• CRX18
• Transmitter
• Battery 600 mah 2S
• USB charger

Not included :

• 4 LR6 (AA) type batteries
• Various modeling tools

Dimensions :

Wheelbase: 153.7mm

Total length: 257mm

Width: 123.8mm

Height: 120.60mm

Ground clearance at the gearbox: 39.70 mm

Ground clearance at axles: 17.1mm

Forward angle of attack: 58.60°

Aft angle of attack 56.10°

Features :

1/8th Scale for great fun and handling

3 Differentials

KONECT 7kg-metal geared Servo

Max. height : 175mm

Wheelbase: 322mm

Track (front): 306mm

Track (rear): 310mm

Front ground clearance: 54mm

Rear ground clearance: 56mm

Total weight: 2330 grams

Supplied in the box:

Desert Buggy 1/8th DB8SL pre-decorated charcoal version without batteries and without charger

KT3X radio system

Konect 550 16T brushed electric motor

Servo Konect 7kg-0.18s metal gears

DB8SL Short Course type tires

LED kit

Instruction manual

Factory settings:

Differentials: front 7000 / centre 7000 / rear 300

Shocks: 450

Required for Use

4 LR6 (AA) batteries

LiPo battery

Matching charger

Miscellaneous modelling tools

1/12 vintage scale electric crawler

The CR12 Outlaw is a traditionally designed scale (chassis with side members and locked differentials) at 1/12. It’s a versatile machine that can move slowly over obstacles but can also go much faster when hiking.

Specifications

 Includes 2.4Ghz Transmitter

 Water resistant 45Amp. 2 in 1 system

380 motor and metal motor gear

 850Mah Li-Ion battery with USB charger

 Fully adjustable threaded shocks

 CMS chassis mounted steering servo

 Front metal CVA axle shafts

 Steel realistic C frame

 Front and rear locked axles

 Center torque gear design

 Optional LED set for front and rear (not included)

Dimensions

Height: 180mm

Wheelbase: 215mm

Length: 380mm

Width: 200mm

Weight (with battery): 1100gr

SPECIFICATIONS

 Brushed DC electric motor 550size
 5 wire 4kg steering servo
 Scale: 1:12 XL size
 Up to 100m remote range
 Operation time: up to 20 min.
 Metal transmission shaft
 Center metal gear
 Rubber tires with sponge inserts
 Sealed ball bearings Four wheel independent suspension system
 KONECT KT3X transmitter
KONECT KR21 2 in 1 – 45Amp ESC/Receiver
 Oversized protection
 Charging pressure limiting protection
 Over-discharge protection
 Thermal protection on PCB
 Car battery: 2200 mAh Li-ion
 Remote control power supply:4x 1.5V “AA” batteries (Not included)
 Suitable for chidren above 14 years old

DIMENSIONS

 Length: 380 mm
 Width : 295mm
 Height : 170mm
 Wheelbase : 236mm
 Ground clearance : 52mm
Wheel diameter : 109mm
 Wheel width : 65mm
 Weight : 1616 g

The DTX, the STX and the MTX are designed on the same basis: the same chassis with 4-wheel drive, equipped with large wheels to be able to evolve on all terrains. The maximum speed can be adjusted to make learning to pilot easier. They are also fitted with transmission universal joints and metal differential gears. The transmission is entirely mounted on ball bearings. Like all scale models, these vehicles are easy to repair in the event of breakage, and can be customized using the many options available.

The MTX is a Monster Truck originally equipped with several options: metal crown and pinion, more powerful steering servo and a battery that offers more range.

SPECIFICATIONS

 Length: 380mm
 Width: 295mm
 Height: 170mm
 Wheelbase: 236mm
 Ground clearance: 52mm
 Wheel diameter : 109mm
 Wheel width: 65mm
 Weight: 1616g

The sport version of the STX is equipped with a metal crown wheel and spur, a reinforced servo, 2200 lithium ion battery. The STX is also equipped with a dial that allows you to limit the speed on the transmitter, ideal for beginners. Without a doubt, the STX sport is the best platform on the market to start your fun RC adventure.

FEATURES

550 type carbon motor

4kg 3-wire steering servo

Scale: 1/12th XL

Vehicle control distance: approximately 100m

Autonomy of use: approximately 20 min

Metal transmission gimbals

Metal central crown

Metal differential gears

Front and rear double triangulation

4 independent shock absorbers

Rubber tires mounted on rims

Entirely mounted on ball bearings

Frequency: 2.4Ghz

45Amp electronic speed controller

Entirely metal transmission

Metal front triangle axle support

Electronic speed controller features thermal protection

Transmitter power supply: 4 x R6 1.5V type batteries (not included)

2200MaH 7.4V Li-ion battery

Not suitable to a child under 14

DIMENSIONS

Length: 410 mm

Width: 302 mm

Height: 160 mm

Wheelbase: 240 mm

Ground clearance: 53 mm

Wheel diameter: 112 mm

Wheel width: 63 mm

Weight (without battery): 1660 g

The sport version of the STX is equipped with a metal crown wheel and spur, a reinforced servo, 2200 lithium ion battery. The STX is also equipped with a dial that allows you to limit the speed on the transmitter, ideal for beginners. Without a doubt, the STX sport is the best platform on the market to start your fun RC adventure.

FEATURES

550 type carbon motor

4kg 3-wire steering servo

Scale: 1/12th XL

Vehicle control distance: approximately 100m

Autonomy of use: approximately 20 min

Metal transmission gimbals

Metal central crown

Metal differential gears

Front and rear double triangulation

4 independent shock absorbers

Rubber tires mounted on rims

Entirely mounted on ball bearings

Frequency: 2.4Ghz

45Amp electronic speed controller

Entirely metal transmission

Metal front triangle axle support

Electronic speed controller features thermal protection

Transmitter power supply: 4 x R6 1.5V type batteries (not included)

2200MaH 7.4V Li-ion battery

DIMENSIONS

Length: 410 mm

Width: 302 mm

Height: 160 mm

Wheelbase: 240 mm

Ground clearance: 53 mm

Wheel diameter: 112 mm

Wheel width: 63 mm

Weight (without battery): 1660 g

Hobbytech Rogue Tera RTR Brushless 4wd Features :

High traction triple differential 4 wheel drive system (front, middle and rear).

Progressive shock springs and oil filled shock absorbers with huge ride height for maximum off road fun.

Soft Compound TERRAMAX Monster sized tyres on cool looking black wheels to tackle the most tricky of surfaces.

High Impact Suspension and chassis components for class leading strength and reliability.

Water resistant receiver box to help protect the electronics against water ingress.

KONECT-RC 7kg metal gear high torque steering servo.

Konect-RC 3660 2200kv brushless electric motor with cooling fan.

KONECT-RC brushless 80Amp sct speed controller WP 2-3s compatible.

Rear wheelie bar to keep things under control in those moments of flat out hard acceleration.

KONECT-RC 2.4ghz radio system.

Pre-Painted Bodyshell.

Dimensions :

Max height : 210mm

Length: 470mm

Wheelbase: 270mm

Front track: 355 mm

Rear track: 355 mm

Front ground clearance: 68mm

Rear ground clearance: 68mm

Total weight: 2850 g

Contents of the box :

Monster XL 1/10th Rogue Tera pre painted in Green.

KT3X/SET radio system.

Instruction manual.

Not included :

4 LR6 (AA) batteries for the transmitter.

Battery/Charger.

This 'Racers Edition' features a LMR Racing trim scheme, and is a Limited production run of just 1000 units globally. Once they are gone, they are gone, it's that simple! The spec remains 'Hobby Grade' and the performance as exciting as ever. This is one Micro product we've been constantly asked to rerelease, and we are happy to oblige!

Spec:

Hobby Grade 2.4GHz F.H.S.S Radio Gear

7.2V NIMH and Safe 5v USB Charger

Limited LMR Racing Trim Scheme

Hobby Grade Steering Servo

8000KV Brushless Motor

Ballraced 4WD Driveline

2S LiPo Friendly ESC

High Grip Tyres

This new 'Racers Edition' GT24B features a new and very unique race inspired livery.

The spec remains 'True Hobby Grade' and the performance as exciting as ever. This is one Micro product that's put smiles on faces globally and continues to exceed end user expectations. Fast, Brushless and 2S LiPo compatible, what not to like?

Grab one while you can as they will sell out as fast as they can be driven!

Spec:

Hobby Grade 2.4GHz F.H.S.S Radio Gear

7.2V NIMH and Safe 5v USB Charger

Limited LMR Racing Trim Scheme

Hobby Grade Steering Servo

8000KV Brushless Motor

Ballraced 4WD Driveline

2S LiPo Friendly ESC

High Grip Tyres

CRX2 Version KIT Comes with:

1.9 inch tires and wheels

Universal body mount and bumper

Without electronics or body

NOT INCLUDED

Brushless motorization (recommended combo: KN-40-540-1800-FUS)

Or Brushed (recommended ESC and motor: KN-BRUSH40-CRAWBT and KN-M5540-55T)

Servo (recommended: KN-2113LVWP)

Battery (recommended: KN-LP2S5200)

Charger (recommended: KN-MULTI60-PLUS)

Radio and receiver (recommended: KN-KT3S-PLUS-SET)

Body

The News

New adjustable wheelbase chassis

New anti-torque twist transmission box

New WOLF SHOCKS aluminum shock absorbers (droop and semi-droop)

New realistic steel treated central drive shafts

New front and rear bridges

New front steering knuckles with 0° Ackerman angle

New steering knuckle holders with PANHARD support

New front and rear suspension links

New multi-position battery holder

New shock absorber holders

New CMS plate (servo mounting on chassis)

New central stiffening bars

The CRX2 kit comes with the LC70 bodywork.

Hinge bodywork assembly (without clips)

NOT INCLUDED

Brushless Motorization (recommended combo: KN-40-540-1800-FUS)

Or Brushed (recommended ESC and motor: KN-BRUSH40-CRAWBT and KN-M5540-55T)

Servo (recommended: KN-2113LVWP)

Battery (recommended: KN-LP2S5200)

Charger (recommended: KN-MULTI60-PLUS)

Radio and Receiver (recommended: KN-KT3S-PLUS-SET)

New features

New adjustable wheelbase chassis

New anti-torque twist transmission box

New WOLF SHOCKS aluminum shocks (droop and semi-droop)

New realistic steel-treated central drive shafts

New front and rear bridges

New front steering arms with 0° Ackerman angle

New steering arm holders with PANHARD support

New front and rear suspension links

New multi-position battery support

New shock supports

New CMS plate (servo mount on chassis)

New central stiffening bars

PRESENTATION

Ideal for initiation to competition and practice of bash in 6S version

The SPIRIT NXT EP 2.0 Xtrem Edition is a 4WD TT 1/8 Brushless RTR “Ready to go” buggy designed and developed in France, manufactured on the famous HOBBYTECH SPIRIT NXT platform. This new buggy is equipped with electric propulsion capable of extraordinary power to bring you maximum pleasure and thrills. All the experience and know-how of HOBBYTECH’s competition Team are brought together on this model capable of moving from a leisure practice to pure competition racing. The “ball” front axle provides exemplary road holding and robustness on all types of terrain. Combined with the four large volume shocks entirely in aluminum with a diameter of 16 mm, you will benefit from the best alternative to use this vehicle both in competition but also on bash grounds. The optimization of the vehicle thanks to the new reinforced parts will allow you to use this vehicle on even more “Xtrem” grounds !!

SPECIFICATIONS

XTREM VERSION NEWS:

New hard coated steel drive cups included

Arm holder in aluminium included

New 5mm CNC reinforced Front shocks tower

Adjustable front lower and upper suspension arm system

Steel spur gear 46t

Bevel gears front / rear, steel 13/43t

Race design T6 6061 Front and Rear shock tower

3mm Billet T6 6061 lasered chassis plate

T6 6061 aluminium motor mount in 2 parts

CVD Driveshafts front

Fully assembled with turnbuckles and ball bearings (24 pcs)

«Rocket» pre-mounted tyres on multi-spokes rims

Fully aluminium strong 16mm bog bore racing shock absorbers

Adjustable racing wing profile

Pre-printed body by BittyDesign

KT2S+” KONECT 2.4Ghz. radio system

KONECT 17kg/14sec metal gear steering servo

KONECT brushless 150Amp waterproof esc

KONECT brushless 4274 4pôles 2000kv

Features :

Complete black wheels 12mm

Ultra-resistant calipers and steering knuckle

Water resistant receiver box

KONECT 7kg metal gear steering servo

Reinforced anti-impact frame

KT3X/SET radio system

Type 775 brushed electric motor with integrated fan

KONECT 60Amp Controller

Rear wheelie bar

Hobbytech Rogue Tera RTR Brushed 4wd Features :

High traction triple differential 4 wheel drive system (front, middle and rear).

Progressive shock springs and oil filled shock absorbers with huge ride height for maximum off road fun.

Soft Compound Monster sized tyres on cool looking black wheels to tackle the most tricky of surfaces.

High Impact Suspension and chassis components for class leading strength and reliability.

Water resistant receiver box to help protect the electronics against water ingress.

KONECT-RC 7kg metal gear high torque steering servo.

Powerful high torque HUGE 775 brushed electric motor with integrated fan.

KONECT-RC brushed 60Amp speed controller 2-3s compatible.

Rear wheelie bar to keep things under control in those moments of flat out hard acceleration.

KONECT-RC 2.4ghz radio system.

Yellow Pre Painted Bodyshell.

Dimensions :

Max height : 210mm

Length: 470mm

Wheelbase: 270mm

Front track: 355 mm

Rear track: 355 mm

Front ground clearance: 68mm

Rear ground clearance: 68mm

Total weight: 2850 g

Contents of the box :

Monster XL 1/10th Rogue Tera pre painted in Yellow.

KT3X/SET radio system.

Instruction manual.

Not included :

4 LR6 (AA) batteries for the transmitter.

Battery/Charger.

Hobbytech Rogue Tera RTR Brushless 4wd Features :

High traction triple differential 4 wheel drive system (front, middle and rear).

Progressive shock springs and oil filled shock absorbers with huge ride height for maximum off road fun.

Soft Compound TERRAMAX Monster sized tyres on cool looking black wheels to tackle the most tricky of surfaces.

High Impact Suspension and chassis components for class leading strength and reliability.

Water resistant receiver box to help protect the electronics against water ingress.

KONECT-RC 7kg metal gear high torque steering servo.

Konect-RC 3660 2200kv brushless electric motor with cooling fan.

KONECT-RC brushless 80Amp sct speed controller WP 2-3s compatible.

Rear wheelie bar to keep things under control in those moments of flat out hard acceleration.

KONECT-RC 2.4ghz radio system.

Green Pre Painted Bodyshell.

Dimensions :

Max height : 210mm

Length: 470mm

Wheelbase: 270mm

Front track: 355 mm

Rear track: 355 mm

Front ground clearance: 68mm

Rear ground clearance: 68mm

Total weight: 2850 g

Contents of the box :

Monster XL 1/10th Rogue Tera pre painted in Green.

KT3X/SET radio system.

Instruction manual.

Hobbytech Rogue Tera RTR Brushless 4wd Features :

High traction triple differential 4 wheel drive system (front, middle and rear).

Progressive shock springs and oil filled shock absorbers with huge ride height for maximum off road fun.

Soft Compound TERRAMAX Monster sized tyres on cool looking black wheels to tackle the most tricky of surfaces.

High Impact Suspension and chassis components for class leading strength and reliability.

Water resistant receiver box to help protect the electronics against water ingress.

KONECT-RC 7kg metal gear high torque steering servo.

Konect-RC 3660 2200kv brushless electric motor with cooling fan.

KONECT-RC brushless 80Amp sct speed controller WP 2-3s compatible.

Rear wheelie bar to keep things under control in those moments of flat out hard acceleration.

KONECT-RC 2.4ghz radio system.

Pre-Painted Bodyshell.

Dimensions :

Max height : 210mm

Length: 470mm

Wheelbase: 270mm

Front track: 355 mm

Rear track: 355 mm

Front ground clearance: 68mm

Rear ground clearance: 68mm

Total weight: 2850 g

Contents of the box :

Monster XL 1/10th Rogue Tera pre painted in Green.

KT3X/SET radio system.

Instruction manual.

Not included :

4 LR6 (AA) batteries for the transmitter.

Battery/Charger.