UAV, Drone & FPV Motors

The Avenger V3 series offer seriously impressive performance for a very reasonable price. This 2812 size motor is ideal for your long range FPV quads offering excellent efficiency to maximize your flight times with plenty of power to still have some fun making it overall a great motor. This 2812 size is ideal for 9″ blades

• 1115kV version is best for maximum power at a max thrust of 3.5kg per motor

Key Features

• N52H Arc Magnet
• Missile Grade Copper Wire
• Japanese NMB Bearings
• Kawasaki Silicon Steel Stator
• Titanium Alloy Hollow Shaft
  
  Bearings
  Avenger 2812 engine is equipped with Japanese NMB bearings. These bearings are known for their silence and smooth rotation.
  Weight
  Avenger 2812 motor has a weight of 79 grams (including short wire).
  Screw size
  Avenger 2812 motor has a motor pattern of 19x19mm with an M3 screw size.

Specifications:

KV-1115
Size: 42x33.9mm
Weight : 76gr
Magnets: 12N14P
Cables: 25cm, 18awg

Package Includes

• 1x Motor
• 1x Screw Set

This is an upgrade ( electronics set) for Sky hero Spyder and Spy (Frame is Not included)

Combo available in Different versions and will include:

Combo 1 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, No Flight controller
Combo 3 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, DJI A2
Combo 4 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, APM 2.8, GPS
Combo 5 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, Pixhawk, GPS

Combos below can be used for Spy and Spyder 6

Combo 6 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, No Flight controller
Combo 8 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, DJI A2
Combo 9 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, APM 2.8, GPS
Combo 10 For Spy:6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, Pixhawk, GPS

Excellent motor for 450-500 size drones, self locking tread, fit props with self locking 6mm( example Phantom), Choice of CW and CCW

Well-balanced good quality magnets give you the smooth running experience. This premium quality MC 2312 920KV Brushless DC Motor for Drone is good to go for many UAV pilots.

This motor has rugged construction equipping the Japanese NMB bearings for smooth operations.

Model 2312 Motor KV
(RPM/V)    920
Configuration 12N14P
Maximum Watts(W) 220
No-Load Current    0.45A @10V
Max. Efficiency Current    14A
Operational voltage 2S-4S
Poles 14
Length (mm)28    
Width (mm)28    
Height (mm)26    
Weight (gm)50g (Approx) 

The new 2312 motor adopts a pioneering stator winding,offers improved heat dissipation. With its impact-resistant bearings-the system is more durable than ever before. The electromagnetic design, tailored for the DJI Phantom, has effectively improved the output power, and when used with the 9X4.5-9x5 propellers your whole propulsion system can provide 200g/axis more maximum output thrust when using a 3S LiPo battery.
Additionally, this new propulsion system allows you to load more equipment on your Phantom without sacrificing flight time, offering you a better flight experience. 

Specifications:

• Motor Weight: 60Gr
• Stator size 23x12mm
• recommended propeller:9 x 4.5-5"
• No-load current : 0.4Amp
• Thrust:680 gr with 9x4.3 prop, 11 Amps, 11830 RPm

Delivered: set of 2 motors(1 CW and 1 CCW)

Avizar MC4014 Brushless MultiRotor Motor 330kv, Specially made for Monster quads, for 6S setups.

Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference just by turning them, and hear the difference on the run!  

This motor has been custom designed in Europe, and tested during 2 years, and found to be the most efficient for most multi-copters from 700cm and up, due its features.

So what is so special in this motor:

1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

2- Heat, 25% lower heat generation thanks to ceramic bearings.

3- Ceramic hybrid bearings, and the motor has 3 of them: Radial forces of motor taken away with the help of those special bearings, which also self lubricated,the smoothness of the motor felt directly with the throttle reaction.

4- Special size and low profile of cage and motor shaft will allow perfect setup and perfect performance on any setup, single or coaxial.

Features:

• Sealed Japanese Ceramic Hybrid bearings
• Short, hardened Japanese steel shaft
• 0.2mm NdFeB stator plates
• Includes 6mm, prop adapter, and mounting plate
• Oversized motor wires 3.3mm, silicone, for long and safe mounting.

Specifications:

•   Model: MC4014-330KV
•   Config: 18N24P
•   Motor size: 44.8L x 34.5 mm
•   Weight: 149g
•   KV(rpm/v): 330
•   Max Power Continuous: 750W
•   Max Current: 25A
•   Max Efficiency Current: 3 - 10A >84%
•   Battery: 4 - 8s LiPo, optimal for 6S
•   Prop: 13"- 18"
•   Internal resistance :85mohm

Included:

• Motor with 60cm wires x1
• Prop adaptor for normal prop with 8mm shaft x1
• Prop adaptor for Flat props x 1
• Prop adaptor Screws.

Avizar MC4114 Brushless MultiRotor Motor 350kv, Specially made for Monster quads, for 6S setups.

Very high quality super smooth running motors, designed specifically for multi-rotor use. You can feel the difference just by turning them, and hear the difference on the run!  

This motor has been custom designed in Europe, and tested during 2 years, and found to be the most efficient for most multi-copters FRAMES from 800Mm and up, due its features.

So what is so special in this motor:

1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

2- Heat, 25% lower heat generation thanks to ceramic bearings.

3- Ceramic hybrid bearings, and the motor has 3 of them: Radial forces of motor taken away with the help of those special bearings, which also self lubricated,the smoothness of the motor felt directly with the throttle reaction.

4- Special size and low profile of cage and motor shaft will allow perfect setup and perfect performance on any setup, single or coaxial.

Features:

• Sealed Japanese Ceramic Hybrid bearings
• Short, hardened Japanese steel shaft
• 0.2mm NdFeB stator plates

Specifications:

•   Model: MC4114-350KV
•   Config: 24N22P
•   Motor size: 46 x 39 mm
•   Weight: 149g
•   KV(rpm/v): 350
•   Max Power Continuous: 350
•   Max Current: 25A
•   Battery: 4 - 8s LiPo, optimal for 6S
•   Prop: 13"- 18"
•   Internal resistance :0.195 ohms

Included:

• Motor
  
• Prop adaptor for Flat props x 1
• Prop adaptor Screws.

Multirotors are used in many projects. because of High demands, longer flying times, heaver loads and Extreme climate conditions, there is a growing demand for Higher quality motors.
Delivering best demands, designed for Water proof and dust resistance, X3 motors give you more value.

X3 motor delivered in Black coating Matt finish, it fits 35mm motor mounts.
Delivered with original Japanese bearings, Dynamically balanced for Zero vibrations.

Fits 4-8S lipos, tested with props 12-14"( see table below)

Delivered with Standard shaft adapter for Conventional props and Flat adapter for Flat props.

Specifications:
 

• KV :470
• Config: 12N14P
• Shaft Diameter: 4mm
• Motor Dimension :34.8х34.2
• Weight : 120g
• Current Idle :0.5A
• No.of Cells: 4-8S Lipo
• Continuous current(A) 180S :25A max
• Continuous Power(W)180S :450W max
• Max. efficiency current: (6-15A)>85%
• Internal resistance :170mΩ

CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CCW)

Operating condition:

• Rated voltage     3.2V DC
• Direction of rotation     CW and CCW
• Operating voltage range DC3.0-3.7V DC
• perating temperature ran ge  -10-50°C
• Motor position     all position

Description:

• Motor Diameter: 7mm
• Motor Length: 20mm
• Shaft Diameter: 1.0mm
• Cable Length: 60mm
• Weight: about 5g
• Option: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
• Plug: Without plug
• Quantity: 1 pcs

CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CW)

Operating condition:

• Rated voltage     3.2V DC
• Direction of rotation     CW and CCW
• Operating voltage range DC3.0-3.7V DC
• perating temperature ran ge  -10-50°C
• Motor position     all position

Description:

• Motor Diameter: 7mm
• Motor Length: 20mm
• Shaft Diameter: 1.0mm
• Cable Length: 60mm
• Weight: about 5g
• Option: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
• Plug: Without plug
• Quantity: 1 pcs

CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CCW)

Description:

• Motor Diameter: 8.5mm
• Motor Length: 20mm
• Shaft Diameter: 1.0mm
• Cable Length: 60mm
• Weight: about: 5.3g
• Option: Clockwise Motor(With Red Blue Wire), Anti-clockwise Motor(With Black White Wire)
• Plug: Without plug
• Quantity: 1 pcs
• This 8520 coreless motor support 2S battery

Operating condition:

• Rated voltage     7.0V DC
• Direction of rotation     CW and CCW
• Operating voltage range  DC3.0-7.4V DC
• perating temperature range  -10-50°C
• Motor position     all position

CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CW)

Description:

• Motor Diameter: 8.5mm
• Motor Length: 20mm
• Shaft Diameter: 1.0mm
• Cable Length: 60mm
• Weight: about: 5.3g
• Option: Clockwise Motor(With Red Blue Wire), Anti-clockwise Motor(With Black White Wire)
• Plug: Without plug
• Quantity: 1 pcs
• This 8520 coreless motor support 2S battery

Operating condition:

• Rated voltage     7.0V DC
• Direction of rotation     CW and CCW
• Operating voltage range  DC3.0-7.4V DC
• perating temperature range  -10-50°C
• Motor position     all position

Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The CM-2206-20 Racing Edition Motor was designed from the ground up to be the ultimate power source for Gliders and 250mm FPV Racing Quads running on 4-cell Li-Po power! With 6x4.5 props attached, a set of four of these motors will produce 10 pounds of static thrust for blistering acceleration and incredible top end speeds.

The Cobra CM-2206 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2206 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The CM-2206 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

Included with every Cobra CM-2206 Series Motor is a complete accessory package which contains the following items:

• Four M3x5mm Motor Mount Screws
• Four M3 Flat Washers
• Machined Aluminum Prop Washer
• Locking Prop Nut with Nylon Insert

Cobra CM-2206/20 Motor Specifications

•  Stator Diameter     22.0 mm (0.866 in)
•  Stator Thickness     6.0 mm (0.236 in)
•  Number of Stator Slots     12
•  Number of Magnet Poles     14
•  Motor Wind     20 Turn Delta
•  Motor Kv Value     2100 RPM per Volt
•  No Load Current (Io)     0.85 Amps @ 10 Volts
•  Motor Resistance (Rm) per Phase     0.098 Ohms
•  Motor Resistance (Rm) Phase to Phase     0.065 Ohms
•  Maximum Continuous Current     25 Amps
•  Max Continuous Power (3-cell Li-Po)     280 Watts
•  Max Continuous Power (4-cell Li-Po)     370 Watts
•  Motor Weight     36.5 grams (1.29 oz.)
•  Outside Diameter     27.0 mm (1.063 in.)
•  Motor Shaft Diameter     3.00 mm (0.118 in.)
•  Prop Shaft Diameter     5.00 mm (0.197 in.)
•  Motor Body Length     16.5 mm (0.650 in.)
•  Overall Shaft Length     35.3 mm (1.390 in.)
•  Motor Timing     5-10 degrees
•  PWM Frequency     8-20 KHz

Cobra CM-2213/18 Multirotor Motor, Kv=1350

Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2213 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

To complete the package, a complete hardware accessory kit is included with every Cobra Motor. Included in this hardware kit are the following items:

• Heavy Duty 3mm Thick Cross Style Motor Mount
• Four M3x6mm Motor Mount Screws
• Bolt-On style threaded prop adapter with 3 screws
• Retaining Collar with Set Screw
• Three female 3.5mm bullet connectors
• Three pieces of heat-shrink tubing

Specifications:

• Stator Diameter     22.0 mm (0.866 in)
• Stator Thickness     13 mm (0.512 in)
• Number of Stator Slots     12
• Number of Magnet Poles     14
• Motor Wind     18 Turn Delta
• Motor Kv Value     1350 RPM per Volt
• No Load Current (Io)     0.68 Amps @ 8 Volts
• Motor Resistance (Rm) per Phase     0.102 Ohms
• Motor Resistance (Rm) Phase to Phase     0.068 Ohms
• Maximum Continuous Current     20 Amps
• Max Continuous Power (3-cell Li-Po)     220 Watts
• Motor Weight     61.0 grams (2.15 oz.)
• Outside Diameter     27.7 mm (1.091 in.)
• Shaft Diameter     3.17 mm (0.125 in.)
• Motor Body Length     28.0 mm (1.102 in.)
• Overall Shaft Length     42.0 mm (1.654 in.)
• Motor Timing     5-10 degrees
• PWM Frequency     8kHz

Cobra CM-2213/26 Multirotor Motor, Kv=950

Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance.
All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2213 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life.
The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.
Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra 2213 Series Motor is a complete accessory package which contains the following items:

• Heavy Duty 3mm Thick Cross Style Motor Mount
• Four M3x6mm Motor Mount Screws
• Bolt-On style theaded prop adapter with 3 screws
• Retaining Collar with Set Screw
• Three female 3.5mm bullet connectors
• Three pieces of heat-shrink tubing

Specifications:

• Stator Diameter     22.0 mm (0.866 in)
• Stator Thickness     13 mm (0.512 in)
• Number of Stator Slots     12
• Number of Magnet Poles     14
• Motor Wind     26 Turn Delta
• Motor Kv Value     950 RPM per Volt
• No Load Current (Io)     0.45 Amps @ 8 Volts
• Motor Resistance (Rm) per Phase     0.201 Ohms
• Motor Resistance (Rm) Phase to Phase     0.134 Ohms
• Maximum Continuous Current     14 Amps
• Max Continuous Power (3-cell Li-Po)     150 Watts
• Motor Weight     61.0 grams (2.15 oz.)
• Outside Diameter     27.7 mm (1.091 in.)
• Shaft Diameter     3.17 mm (0.125 in.)
• Motor Body Length     28.0 mm (1.102 in.)
• Overall Shaft Length     42.0 mm (1.654 in.)
• Motor Timing     5-10 degrees
• PWM Frequency     8kHz

Emax MT2206 - 1900kv  Brushless Motor for FPV Mini Quadcopter Drone Racers. These motors are perfect when you want more power and thrust over the 1800 or 2204 size motors. These work best with 6x4 Props running a 3s set up , but if your escs can handle it then run on 4s for a whole new level of speed and agility.

Come with accesory pack and mounting bolts .

Availiable in CW or CCW version

Specifications:

• Motor: 2206-1900
• Max Thrust : 460 gr
• Voltage support :2-3S
• Motor structure : 12N14P
• Recommended propellers: 6-8"
• Shaft : 3mm
• Motor Diameter : 27.9mm
• Weight : 32gr

Emax RS2205 Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

Cooling:
The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.

N52 Magnets:
Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.

Bearings:
Genuine Japanese NMB Bearings provide long lasting, smooth performance.

Key Features:

• Thrust:Produces over +1,000g of thrust using 4S and 5x4.5 prop
• Cooling Series Bell Design reduces motor temperature by at least 30%
• Highest Grade N52 Neodymium magnets
• Genuine Japanese NMB Bearings
• Each Motor is Dynamically Balanced in the factory.
• 15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
• 3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
• Windings made from  hight temp copper wire

Specifications:

• Model: RS2205
• KV: 2600kv
• Weight: Approx. 30g with wires
• Wire AWG: 20AWG
• Stator Diameter: 22mm
• Stator Height: 5mm
• Configuration: 12N14P
• Motor Diameter: 27.9mm
• Motor Height: 31.7mm
• Prop Adapter Shaft Thread: M5
• Input voltage: 3S-4S (12.6 - 16.8v)

Scope of delivery-1 MOTOR,CW OR CCW

Emax RS2205 Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

Cooling:
The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.

N52 Magnets:
Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.

Bearings:
Genuine Japanese NMB Bearings provide long lasting, smooth performance.

Key Features:

• Thrust:Produces over +1,000g of thrust using 4S and 5x4.5 prop
• Cooling Series Bell Design reduces motor temperature by at least 30%
• Highest Grade N52 Neodymium magnets
• Genuine Japanese NMB Bearings
• Each Motor is Dynamically Balanced in the factory.
• 15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
• 3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
• Windings made from  hight temp copper wire

Specifications:

• Model: RS2205
• KV: 2600kv
• Weight: Approx. 30g with wires
• Wire AWG: 20AWG
• Stator Diameter: 22mm
• Stator Height: 5mm
• Configuration: 12N14P
• Motor Diameter: 27.9mm
• Motor Height: 31.7mm
• Prop Adapter Shaft Thread: M5
• Input voltage: 3S-4S (12.6 - 16.8v)

Scope of delivery- 4 motors in set, 2cw+2ccw

eTURBINE Motor TB2204 CCW for TB250 racer

1 Motor included.

eTURBINE Motor TB2204 CCW for TB250 racer, this is more Flat version of the motor. Certain batches delivered with those motors.

1 Motor included.CCW version

eTURBINE Motor TB2204 CW for TB250 racer

1 Motor included.

eTURBINE Motor TB2204 CW for TB250 racer, this is more Flat version of the motor. Certain batches delivered with those motors.

1 Motor included.CW version

2806.5 1300Kv is an affordable motor for 7"-10" long range copters. The motor bell has small protrusions on the top to reduce the chance of propeller slippage. They use 20cm long 18AWG cables.

Key Features

• Size: 2806.5
• Kv: 1300
• Weight: 57g (including cable)
• Dimensions: 34.5*20.5mm
• Mounting holes: 19mm M3
• Cables: 200mm 18AWG
• Configuration: 12N14P

Package Includes

• 1x Motor
• 1x Screw Set

Hobbywing Integrated XRotor 6215 180KV motor / 80A ESC / 2388 propeller for professional UAV, FOC Power !

Integrated & Ready-to-use Propulsion System

The X6 propulsion system, which integrates motor, ESC, propeller and motor mount (with 30-to-28 tube adapter) compatible to 28mm&30mm diameter carbon fiber arm tubes
Easy to mount and use.

Note: with the foldable 2388 propeller, the propulsion system is capable of carrying the load of 5KG  per motor: 20K for Quad and30KG for a hexacopter ).

XRotor 6 Series Power Combo for Agriculutral Drones

• Max. Thrust: 12kg per 1Arm (48V, Sea Level )
• Recommended Takeoff Weight: 3kg-5kg/Axis (48V, Sea Level )
• Recommended  LiPo Battery:12S
• Operating Temperature:-20~65℃
• Combo Weight (approx.):720g
• Motor O.D of Carbon Fiber Tube:30mm/28mm (Tube Adapter INCLUDED)
• KV Rating:180
• Outer motor Diameter: 70mm

ESC Model( integrated)

• XRotor PRO HV 80A FOC V3
• Recommended Input Voltage:6-12S LiPo
• Max. Input Voltage:52.2V
• BEC:NO
• Max. Input Current: 80A(With Heat Dissipation)
• Max. Peak Current (10s):100 A (w/ Good Heat Dissipation )
• Input Wires:12AWG
• Output Wires:14AWG
• Weight:85g(w/o Wires)
• PWM Input Signal Level:3.3V/5V (Compatible )
• Throttle Signal Frequency:50-500Hz
• Operating Pulse Width:1100-1940 μs

Propeller

• Diameter× Pitch  2388
• Weight: 91g (w/ Propeller Adpater, Single Blade: 36g)

Set available as CW and CCW 

Hot Racerstar BL1306 3100KV 2-4S Brushless Motor CW+CCW

The race series 1306 3100kv motor is a racing motor with massive thrust capabilities for it's size!
This is a very high quality motor with imported NMB bearings, N52 magnets, and a hollow shaft which is held by a bolt vs the traditional c-clip design.
This motor was specifically designed for FPV racing and great for your 3" frame.
With a 3mm main shaft your going to get great durability from these motors for such a small package.

Specification:

• KV: 3100
• Stator Diameter: 17.6mm
• Stator Length: 12.7mm
• Shaft Diameter: M5
• Motor Dimensions(Dia.*Len): Φ17.6×14.5mm
• Weight (g): about 11g
• No.of Cells(Lipo): 2-4S
• Max Continuous current(A): 6.6A
• Max Continuous Power(W): 49W
• Internal resistance: Ω
• Usage: for 150-200 Glass Multirotor Frame Kit

 
CW screw thread motor comes with red cap
CCW screw thread motor comes with black cap
 
Package included:
1 x Racerstar BR1306 3100KV 1-2S Motor

KDS Kylin FPV 250 Race motor 2204-2300KV CCW

KDS Kylin FPV 250 Race motor 2204-2300KV CW

Brushless neodym motors MEGA are designed for direct drive (propellers, ducted fans) and for drive with gearbox. Motors MEGA AC are six-pole 3 phase AC motors, hardened steel shaft is supported in two ball bearings with permanent grease filling. Neodym magnets of dynamically balanced rotor are kevlar bandaged. Efficiency reaches up to 88%. Motor has good efficiency even at high currents thanks to vent holes. Hand made stator, lightweight rotor and design of MEGA AC motors allows permanent high rpm operation.

Motors are made in 4 lengths and are designed mostly for direct propeller drive (without gearbox). However, gearbox can be used and motor ase suitable also for ducted fan drives. Motor can be used for models from 0,8 to 5kg. Output shaft diameter of this product line is 5mm.

Technical data :

No.cells: 6 - 30 NiCd (NiMh), 2 - 10 LiPo
Dimensions: ø 36 mm, length 53,5 mm, ø shaft 5 mm
Weight: 220 g
RPM/1V: 935
Max. current:  70 A
Slope resistance: 16 mΩ
No. winds: 3

iFlight XING CAMO Series Motors has always been one of the most popular motors on the market, and we redesigned the XING motors with nextgen coating technology. The appearance of new XING Camouflage series motors has been enhanced to make them more attractive based on their aggressive performance. There're 2207, 2208,2210, 2306 sizes in the Camouflage XING series for choice. we offer 1700KV for choices to meet different pilots' needs, just like the previous XING series motors.

The iFlight XING series motor is designed and named by FPV pilot & specialist Patrick Xing. Combining IFlight's high-quality motor production technology with Patrick Xing's technical expertise, a top-of-the-line motor has been produced. iFlight XING provides the most incredible power and thrust in the lightest weight. The elliptical body, powerful stator with N52H magnets and very small air gap makes iFlight XING series motor incredible new style motors.

The iFlight XING series motor is characterized by support 6S. The 4mm Titanium alloy shaft and high-quality N52H magnets surrounded by high-temperature resistant windings. It means that the iFlight XING series motor can be pushed to the limit. The sturdy structure and high-quality materials make iFlight XING performs like a beast.

There's non-slip design on the contact surface between iFlight XING motor and propellers to increase the friction and to improve durability; Multi-heat dissipation hole design, helps to pull heat away continuously; Standard M3 16mm*16mm mounting pattern at the bottom, is compatible with all frames on market; Motor cable length 160mm can meet different requirements whether connecting single or 4 in 1 ESC; Each motor has been dynamic balanced, all of them have passed the highest standard iFlight manufacturing and assembling procedure.

Features:

Unibell design

New technology coating elliptical body

High-strength 4mm Titanium alloy shaft

Large heat dissipation holes design (15℃ lower compared to same size motor)

Crush resistant damping bearing, eliminate vibration effectively

50%-80% optimal throttle output, best efficiency

160mm cable length for different frames and setups

CNC high-precision machining 7075 aluminum Bell and Base

220℃ Pacific heat-resistant copper wire & solid winding

Electromagnetically matched magnets and stator

Japanese Kawasaki 1200 Iron Core

N52H High-temperature magnets, NSK bearings

Motor wires protected

Hex bolt shaft set screw

Dynamically balanced

30.6g with a short wire

Package included:

• XING CAMO 2208 Motor (unibell) 1pc 1700KV, FOR 6S
• Hardware set 1 bag

This is a set of Multicopter Motors, perfect for 250 size model FPV racers. Set including CW and CCW self locking adaptor motors.

• The magnet  is 40 uh.
• Long life Japanese NMB bearings
• 0.20mm laminations, maximum efficiency and minimum losses.
• Ultra-flexible motor leads with high-temp 220 °silicone rubber.
• 2mm Bullet connectors.
  
• With rotor dynamic balance process.
• The prop adapters in CW/CCW rotation

Specifications:

• KV: 2000
• Configuration: 12N14P
• Stator Diameter: 22mm
• Stator Length: 6mm
• Shaft Diameter: 3.0mm, OD:2.0mm
• Motor Dimensions(Dia.*Len): 28×18mm
• Weight (g): 30g
• No.of Cells(Lipo): 2-3S
• Max Continuous current(A): 14.7A
• Max Continuous Power(W): 163.2W
• Internal resistance: 0.098Ω

Package includes:

1x 2206-2000KV CW motor
1x 2206-2000KV CCW motor
Set of connectors (not soldered)

 MC3510 size motor especially developed for the Multi-rotors platforms. Fits props with 6mm hole and Flat props

• Motor diameter: 42.5mm
• Configuration : 12N14P
  
• Length: 31.5mm
• Stator Diameter:35mm
• Shaft : m5
• Weight: 97 Grm
• Input voltage: 3-6S, 11-22V
  
• No load current: 0.7A
• Max load current: 25A
  
• Internal resistance: 0.062 Ohm
• Top mounting holes: 12/17mm, M3
  
• Bottom mounting: 25/25, M3
• Recommended esc: 30Amp

Wire length : 50cm

Delivered with prop adaptor 6mm and Flat prop adaptor

The BX series of motors are a balance of quality, performance and price. All BX motors come with integrated one piece CNC motor housing and prop shaft making for a light, strong and compact design. The BX motors come packaged as a set of 2 motors, one CW rotation and one CCW rotation with matching prop nuts. Also included with the set is 2mm bullet connectors and matching mounting hardware. The 1306-3100kv multirotor motor is ideal for small 180~220mm multirotors and 4~5 inch props.

Specifications:

• Item Name: BX1306 3100KV Brushless Motor
• KV: 3100
• Configu ration: NP
• Stator Diameter: 18mm
• Stator Length: 14.1mm
• Shaft Diameter: M5
• Motor Dimensions:18×15.1mm
• Weight (g): 12g
• No.of Cells(Lipo): 2-3S
• Max Continuous current(A): 7.9A
• Max Continuous Power(W): 58.5W

Multicopter motor BL 1407 3500KV for FPV racers 150-180 size CW+CCW

The race series 1407 3500kv motor is a racing motor with massive thrust capabilities for it's size!
This is a very high quality motor with imported NMB bearings, N52 magnets, and a hollow shaft which is held by a bolt vs the traditional c-clip design.
This motor was specifically designed for FPV racing and great for your 3" or 4" frame. The 1407 is slighly larger then your standard 1306 motor but not much heavier.
With a 3mm main shaft your going to get great durability from these motors for such a small package.

Specification:

• RPM/V: 3500kv
• Shaft: 2mm main shaft and 5mm prop shaft
• Voltage: 3S~4S (11.1v to 14.8v)
• Motor Mount Holes: M2 x 12mm x 12mm
• Max Continuous Current: 17.3A
• Weight: 14g

Set including 2 motors, 1x CW and 1x CCW

The new generation of Navigator MN motors are specially designed for industrial drone applications. The new completely enclosed design maintains the lightness of the Navigator MN motors, giving extra winding protection. The water resistance has IP55, which guarantees a correct operation in adverse environments.

The bearings, are Japanese EZO brand, along with mechanically balanced bell, ensure optimal performance and minimal vibration. This is very important in multi-rotors that with aerial cameras.

Strong power ,long service life
• Excellent cooling performance
• Anti-high temperature/Anti-overload
• Dust-resistance/Waterproof/Anti-corrosion

T-motor Newest 8.1KG+ Thrust MN605-S KV170 2Pcs/Set For RC Boat Drone Airplane Aircarft Quadcopter Hexacopter.
Specifications

•     Motor size: ø68.8*39.4mm
•     Stator: Imported silicon steel sheet; Anti-rust treatment; 180° Chigh temperature-resisting coating
•     Configuration: 24N28P
•     Shaft Diameter: IN: 6mm, OUT: 4mm
•     Bearing: Imported 6262ZZ
•     Magnet Level: 150°C high temperature resistance: Level E
•     Silicon Cable: 16WG*150MM
•     Copper Wire: 180°C high temperature resistance: Level H
•     Coil Insulation Test: 500V
•     Centrifugal Cooling Design: YES
•     Rotor Dynamic Balance Standard: <5mg
•     Motor Dynamic Balance Standard: <10mg
•     IP: IP35

Includes

•     4x M3*10 mounting screws
•     2x cover
•     8x M4*12 motor mounting screws

The new generation of Navigator MN motors are specially designed for industrial drone applications. The new completely enclosed design maintains the lightness of the Navigator MN motors, giving extra winding protection. The water resistance has IP55, which guarantees a correct operation in adverse environments.

The bearings, are Japanese EZO brand, along with mechanically balanced bell, ensure optimal performance and minimal vibration. This is very important in multi-rotors that with aerial cameras.

Strong power ,long service life
• Excellent cooling performance
• Anti-high temperature/Anti-overload
• Dust-resistance/Waterproof/Anti-corrosion

Specifications

•     KV: 320
•     Configuration: 24N22P
•     Motor Dimensions(Dia.*Len): Φ68.8×39.4mm
•     Shaft diameter: inner 6mm, out 4mm
•     Weight(g): 316g
•     ldle Current(10)@10v(A): 2A
•     No.of Cells(Lipo): 6S
•     IP: IP55
•     Max Continuous Current(A)180S: 55A
•     Max Continuous Power(W)180S: 1400W
•     Internal Resistance: 30mΩ
•     ESC: Flame 70A
•     Prop: 21 ~ 22 inch
•     Silicon Wire: 16AWG 150mm
  
  Includes
   
• 2x T-Motor MN605S 320KV
• 8x M3x8 Screw
• 8x M4x12 Screw
• 2x Prop Cover

T-motor MN4012 Brushless MultiRotor Motor 4012 motors with 60cm leads.
Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference when you turn them, and hear the difference when the run!

Features:
600mm soft silicone power wires
Sealed Japanese EZO bearings
Short, hardened Japanese steel shaft
0.2mm NdFeB stator plates
Includes 6mm, 8mm and DJI style prop adapter.

Specification

• RPM/V  340Kv
• Number of cells  4~8S LiPo
• Resistance  75mΩ
• No Load Current  1A
• Max. efficiency current  4-10A
• Max. Amps  25A continuous for 180 seconds
• Max Power :  660W continuous for 180 seconds
• Size  44.8x32.5mm
• Weight  128g
• Shaft diameter  4mm

RC Quadcopter Spare Part Brush Motor

Specifications:

• Diameter: 8.5mm
• Length: 20mm
• Pinion 11T pre-installed