Ceramic Bearings

Hybrid Ceramic Ball bearings set for Multicopter Motor Avizar MC3536. Those are replacement Ball bearings set

Inclusive of 3 high performance Bearings

Details:

• 4x13x5mm (1pc)
• 4x8x3mm (2pcs)

To be used with Helicopter and Airplane engines :Webra 40-50-52,55,61

ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 2500 plus degrees F. extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Set include 2 ceramic bearings, Front and Rear

The ceramic ball on the right is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Those bearings are ABEC-7 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Chrome steel, which is perfect for Moisture applications/environment.

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Specifications:

6202 Hybrid Ball bearing
Dimensions : 15X35X11mm
Bearing Material : Chrome steel 52100
Ball material : Silicon Nitride (Si3N4)
Cage: PTFE
Sealing: both side sealed
Abec Rating : Abec -7
Lube: SRL grease ( Non major brand)

Delivery scope: 1 ball bearing

Those bearings are ABEC-7 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Chrome steel, which is perfect for Moisture applications/environment.

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Specifications:

6303 Hybrid Ball bearing
Dimensions : 17x47x14mm
Bearing Material : Chrome steel 52100
Ball material : Silicon Nitride (Si3N4)
Cage: PTFE
Sealing: both side sealed
Abec Rating : Abec -7
Lube: SRL grease ( Non major brand)

Delivery scope: 1 ball bearing

6902  is a Thin High Speed Ball Bearing manufactured with No- shields on both sides and is pre-lubricated with Oil/Grease, allowing it to be ready for use upon delivery.This bearing is MADE in Japan, making this bearing ideal for high speed applications with limited space while still being able to accommodate light radial and axial loads.

Stainless Steel Si3N4 0.375in X 0.875in X 0.2812in Ceramic hybrid ball Bearing #R6ZC

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment.

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 2500 plus degrees F. extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Shield color/material may vary

Set of 1 ball bearing included.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set includes 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Stainless Steel Si3N4 Hybrid Ceramic Ball Bearing 10X26X8 6900C

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing

Hybrid ceramic bearing with steel cages and ceramic balls Si3N4 17x30x7 #6903C

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearing

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Included 1 ball bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set includes 1 Hybrid ceramic bearing

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

This is Ceramic Hybrid Ball bearings set. Its made to fit to Helicopter engines : OS 40/46/50/55- Thunder Tiger 40/46/53 Redline & Pro - Magnum 40/46, YS 50-56

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This set is to be used on Helicopter engines : OS 61 SXH - OS 70 SZ-H - OS 91 FX/ SZ/C-SPEC - Thunder Tiger 61 & 90 Pro -YS 80 , YS 91ST, YS 91 SR, 120,96 , Magnum 61/ 90

Those bearings might fit other engines as well-so check your motor specifications, if not sure, ask us

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This set is to be used on Helicopter engines :Webra 75/91. please also check your motor specifications, the bearings might fit other engines as well

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

This is Ceramic Hybrid Ball bearings set. Fits those models and all modified variants

• Zenoah G240RC,
• Zenoah G270RC,
• Zenoah G290RC,
• Zenoah G260PU,
• Zenoah G231PUH,
• Zenoah G260PUH

Those bearings are ABEC-5 standards, and perfect for All motors/engine applications, we use them as Upgrade-tuning to make the engine long life lasting.
The Bearing is made from Stainless steel, which is perfect for Moisture applications/environment And rated for 500 Hours of engine work

Those bearing size might fit other engines as well

Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 1000C, extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

Silicon nitride is a chemical compound of the elements silicon and nitrogen. Si. ₃N. ₄ (Trisilicon tetranitride) is the most thermodynamically stable and commercially important of the silicon nitrides, and the term ″Silicon nitride″ commonly refers to this specific composition

The ceramic ball on is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

Instructions to use:

Front bearing must have 1 sealing. The inner Bearing must be open, no sealings Most of the time you will receive the bearings properly prepared.
In case of- Sealings are very easy to remove with small screwdriver (wear glasses when working with such tools)

Hybrid bearings can give you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

Set include 2 Hybrid ceramic bearings, Front and Rear

2 models mostly used in Turbine world

608 ZC AND 602 ZC

Modern RC jets use turbine engines. Inside the engine is a single shaft and two hybrid bearings connected to a compressor rotor on one end and a turbine rotor on the other. These bearings have an RPM rating of roughly 30,000 to 140,000 RPMs. To cool the bearings during operation, they must be sprayed with an oil mist. The bearings should be changed after 6-7 runs to prevent bearing fatigue

If you not sure which model you really need, please advise with us