Blades 630-700mm

MAH 4G high performance premium Carbon blades, Especially tuned and balanced for today's flight performance 3D and Flybarless Precision.
You will feel an immediate effect when flying with MAH 4G , excellent control in the air , and if needed, aggressive response performance,.
MAH 4G are a perfect fit for Flybarless helicopters, combining long and precise R&D, Inserting the best features of Flybarless performance in one set of Blades.

Materials: MAH 4G are constructed in Europe, from high quality German carbon fiber and have a symmetrical airfoil to give superb flight performance in all situations.
An efficient and special airfoil with a top quality finish leads to greater efficiency and improved flight times.

Whether you are a beginner or advanced 3D pilot you will appreciate the flight performance these blades have to offer. Great hovering stability combined with response when you need it. Nothing comes close to MAH 4G

You wish you could get your flying a little extra out of? Bolt on a pair of the MAH 4G blades and take your machine flying to the next level!!

All blades are pre-balanced and ready to fly.
Designed and Manufactured in the Europe, using all EU made materials.

Blade Specs:

• Length: 660mm
• Chord: 60mm
• Weight : +- 140gr
• Bolt: 5 mm
• Root: 14mm

This is a replacement set of Align 650mm Carbon Fiber Main Blades - with yellow paint. These blades offer a great balance of agility and stability, and offer a wide envelope of performance to meet any needs of the pilot.

Specifications:

Length: 650mm

Root Size: 12mm

Bolt Hole: 4mm

Weight: ~270g/set

700 3G Carbon Fiber Blades

Item Description
HD700BT 700 3G Carbon Fiber Blades

• Use for T-REX 700 3G Flybarless System.
• The 700 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

• Shape: Symmetrical wing
• Length:700x60x8.05mm
• Width:14mm
• Shaft Diameter:5mm
• Weight:Appro 380g/set

 

Use for T-REX 700N / 700E

Newly 700E F3C carbon main blades for superior stability and resistant to wind gusts.

Shape: Symmetrical wing

 Length: 700x60x8mm

Width: 14mm

Shaft Diameter: 5mm

Weight: approx. 435g / set

AZ700 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

Flawless design for a superior flight experience and feel
The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control. The new AZ700 will unleash the full potential of your helicopter.

Technical Specifications:

• Length:    700mm
• Blade Grip:    >12mm
• Hole:    5mm
• Weight approx.:    202g
• Width:    53-62.5mm
• Airfoil:    Symmetric

AZ560 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ560 will unleash the full potential of your helicopter.

Technical Specifications:

• Length: 560mm
• Blade Grip: >12mm
• Hole: 4 mm
• Weight approx.: 109g
• Width:    49-56mm
• Airfoil:    Symmetric

AZ600 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ600 will unleash the full potential of your helicopter.

Technical Specifications:

• Length:    600mm
• Blade Grip:    >12mm
• Hole: 4 mm
• Weight approx.: 142g
• Width:    53-59.5mm
• Airfoil:    Symmetric

Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

•   Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.
•   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
•   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
•   Designed for your 3D performance.
•   Matched C.C.G. for stability.
•   Matched outward S.C.G. for better autos.
•   Airfoil designed for fast, accurate cyclic.
•   Layered for optimum aerodynamic damping.

Specifications:

•   Length: 690mm
•   Width: 61.5mm
•   Grip: : 12mm
•   Hole: 4-5mm
•   Airfoil: Symmetrical
•   Tip: Aeroflat
•   Make: Carbon Fiber

RotorTech blades are finely crafted premium carbon fiber rotor blades from Fun-Key Aeroplane Models. RotorTech blades are designed to be an all around powerful, efficient, well rounded performance oriented blade that will suite a large majority of flight styles from simple aerobatics, F3C, and extreme 3D flight. Additionally, RotorTech blades utilize a minimal amount of paint within the mold, while still providing excellent flight visibility. By using less weight on all of their blades, weight is saved on each set which offers a small boost in performance.
Rotortech "Ultimate" Blades are a unique design concept from the owners and factory pilots at Fun-Key. Featuring 700mm of length, 63mm wide chord, a 14mm Blade Root, a targeted weight of 200g, and an inward CG around 302mm out from the bolt hole.
Painted in a stealthy and modern look, the Ultimate blades will make you the envy of the flying field. Accenting a small yet visible Orange Tip for in flight visibility, the Ultimates will be uniquely different than others on the market today.

Specifications:

• Length: 700mm
• Width: 63mm
• Root Size: 14mm
• Hole Diameter: 5mm

Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

  Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

•   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
•   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
•   Designed for your 3D performance.
•   Matched C.C.G. for stability.
•   Matched outward S.C.G. for better autos.
•   Airfoil designed for fast, accurate cyclic.
•   Layered for optimum aerodynamic damping.

Specifications:

  Length: 710mm
  Width: 61.5mm
  Grip: >= 12mm
  Hole: 4-5mm
  Airfoil: Symmetrical
  Tip: Aeroflat

Technical features:

Length : 700 mm
Width : 50/64 mm
Root : 12 mm
Bolt Hole : 5mm

Blade Size  700

Type Main Blades (3Blades)

NEW SAB Blades: the silent power!

New aerodynamics, new profiles, new construction philosophy.

The blade produce great power without the need to turn at high rpm. Stable and precise, they are smooth and silent in all maneuvers. This blade is the new standard for SAB!

Technical features:

Length : 700 mm

Width : 50/64 mm

Root : 12 mm

Bolt Hole : 5mm

Technical features:
Length: 701 mm
Width: 50/64 mm
Root: 12 mm
Bolt Hole: 5mm

Technical features:
Length: 701 mm
Width: 50/64 mm
Root: 12 mm
Bolt Hole: 5mm

Technical features:
Length: 701 mm
Width: 50/64 mm
Root: 12 mm
Bolt Hole: 5mm

Technical features:
Length: 701 mm
Width: 50/64 mm
Root: 12 mm
Bolt Hole: 5mm

SAB main blades 690tbs x 3

Specifically designed for all Goblin 700 and other helicopters class 700

Thanks to the variable profile, "SAB Thunderbolt Blades" can increase the performance of your helicopter optimizing efficiency and enhancing the maneuverability in all flight styles. The bi-directional carbon structure ensures high rigidity and strength necessary to withstand very high stress generated by modern 3D helicopters. Include safety wire to prevent the throwing of dangerous fragments in case of a crash.

Technical features:

• Length : 690 mm [3 BLADES]
• Width : 56/60 mm
• Root : 12 mm
• Bolt Hole : 5mm

The Vulcan Rotors RC helicopter blades are a top-tier product crafted by the renowned Italian designers Stefano Lucchi and Massimo Bruttini. These blades are meticulously engineered from the ground up to cater to the demanding needs of 3D pilots, offering an exceptional blend of performance, agility, and stability.

Features
1. Optimal Performance for 3D Pilots:
– Specifically designed to enhance the performance of 3D flight, ensuring that pilots can execute complex maneuvers with ease and precision.

2. Enhanced Flight Time:
– The blades are engineered to consume less power, allowing pilots to enjoy longer flight sessions without the need for frequent recharges.

3. Super Reactive:
– These blades are incredibly responsive, providing an agile feel that enables quick and precise control during flight.

4. Stability in Hard 3D:
– Despite their agility, Vulcan Rotors blades maintain remarkable stability, making them ideal for hard 3D flying. Pilots can push their helicopters to the limit without losing control or precision.

5. Italian Design Excellence:
– Designed by Stefano Lucchi and Massimo Bruttini, the blades embody Italian craftsmanship and innovation, ensuring a high-quality product that meets the rigorous demands of professional 3D pilots.

With Vulcan Rotors blades, pilots get a perfect combination of extended flight time, exceptional reactivity, and unwavering stability, making them a must-have for anyone looking to elevate their 3D flying experience.

Specifications:

• Length : 700 mm
• Width : 62 mm
• Root : 12 mm
• Bolt Hole : 5 mm
• Weight : 193 gr
• Washer : 2 x 1mm

Align 700N Carbon Fiber Blades

Use for:

• T-REX 700N/700XN

Specifically designed for a nitro helicopter to provide superior flight stability, and enhance the power for better control.
A new blonde yellow layering paint scheme creates a stylish look.

Specifications:

• Carbon fiber material.
• Shape: Symmetrical wing
• Length:700x60x8.05mm
• Width:14mm
• Shaft Diameter:5mm
• Weight:Approx 360g/set