AVIZAR

Cable wire Mounting Clamps pack of 10 for servo wire or up to 4mm wires

This clamp can include up to 4mm diameter of wires, best for some servo wires or silicone battery wires

Arrange your cabling nicely across the helicopter
Including a Pack of 10

Engines carburetor HI- resistance O-ring for Carburators 15mm- this is a better material, more resistant to Fuel and temperatures.

This oring is made in Japan and made to fit Carburetors with 15mm diameter Neck

The material is made for More resistant to Fuel, nitro, Benzin compared to original o-ring.

Delivered as set of 5pcs

Engines carburetor O-ring for Carburators 15mm- this is a better material, more resistant to Fuel and temperatures.

This oring is made in Japan and made to fit Carburetors with 15mm diameter Neck

The material is made for More resistant to Fuel, nitro, Benzin compared to original o-ring.

Delivered as set of 5

Engines carburetor O-ring for Carburators 17mm- this is a better material, more resistant to Fuel and temperatures.

This oring is made in Japan and made to fit Carburetors with 17mm diameter Neck

The material is made for More resistant to Fuel, nitro, Benzin compared to original o-ring.

Delivered as set of 5

The MC-6S is a compact and easy to use 6S cell tester with built-in receiver and satellite check function. Simply connect the balance cable from your LiPO / LiFE battery to the balance pins to instantly read your cell voltage.
The MC-6S also functions as a receiver tester allowing you to verify the correct functioning of S.Bus, PPM, PWM and DSM satellites. An ideal tool for diagnosing receivers emitted when building FPV racing drones.

Specification:

• Voltage input: 5-25V
• Current consumption: 10mAh
• Dimension: 45x31x10mm
• Receiver output mode: S. bus, DSM1024, DSM2048, PPM, PWM
• Cell Checker: up to 6S
• USB input: Micro USB and USB-C

2-Axis Tilt-Roll Camera Mount Kit built to accommodate  most medium size SLR-like camera. inside is up to 145mm wide
This kit includes an universal adapter plate. low cost, operated by servo. You can through simple modifications to fix it anywhere.

Features:

•     2-axis controllable.
•     Fit for most medium size SLR-like camera.
•     Build-in adjustable remote control shutter.  
•     Fit for most RC aero vehicles via easily modify. (see the picture of mounting plate dimation)
•     Light weight: 150g (without servos)

Package content:

    Unassembled 2-Axis Tilt-Roll Camera Mount Kit x 1

Requirement:

•     Mini size servo
•     Gyro or stabilizer (Option)

 

JST-XH 2s Lipo Balance Extension Lead (JST-XH) 30cm This extension made from 24awg cable. produced in Germany

Keep your thumbs/fingers in the right spot with these stick ends from STP made Extra pointy tips keep them right where you want them.Compatible with most radios.Please make sure you choose the correct thread size for your radio.

Features

• CNC precision machining
• Control direction
• Solve the problem of slipping
• The new design of effective assistant operation
• 3mm inner diameter
• Colors- Red or Blue.
• Set of 2 sticks, 2 total pcs

Keep your thumbs/fingers in the right spot with these stick ends from STP made Extra pointy tips keep them right where you want them.Compatible with most radios.Please make sure you choose the correct thread size for your radio.

Features

• CNC precision machining
• Control direction
• Solve the problem of slipping
• The new design of effective assistant operation
• 4mm inner diameter
• Colors- Red or Blue, black
• Set of 2 sticks, 2 total pcs

Keep your thumbs/fingers in the right spot with these stick ends from STP made Extra pointy tips keep them right where you want them.Compatible with most radios.Please make sure you choose the correct thread size for your radio.

Features

• CNC precision machining
• Control direction
• Solve the problem of slipping
• The new design of effective assistant operation
• 4mm inner diameter
• Colors- Red or Blue.
• Set of 2 sticks, 4 total pcs

Keep your thumbs/fingers in the right spot with these stick ends from STP made Extra pointy tips keep them right where you want them.Compatible with most radios.Please make sure you choose the correct thread size for your radio.

Features

• CNC precision machining
• Control direction
• Solve the problem of slipping
• The new design of effective assistant operation
• 3mm inner diameter
• Colors- Red or Blue, or Gun metal
• Set of 2 sticks, 4 total pcs

3M Dual Lock reclosable Fastener, strong, Durable, Versatile Hold

When you need a strong, reliable, yet removable closure or attachment, 3M Dual Lock Reclosable Fasteners are the easy alternative to traditional fastening methods such as screws, nuts or bolts.
This invisible fastener works behind the scenes to create a snug fit and smooth lines for improved aesthetic and sleek appearance.
The strong, interlocking mushroom-shaped heads close with a snap to ensure a secure attachment and help to reduce concerns about material damage and deformation, fastener placement, contamination and corrosion, and the challenges of joining dissimilar materials. From ceiling attachments on buses and trains, and light panels for trade show exhibits, to interior attachments for vehicles, 3M Dual Lock Reclosable Fasteners are versatile, allowing for greater freedom of design with the ease of tape application.

Delivery:

• Delivered in length of  50 cm with Adjesive sides.25mm wide. there is no Hook/Loop side, its same material which can be used on both sides of the product you want to hold in place

3M Gyro Mounting anti vibration pressure sensitive adhesive Pads 2.5mm (6pcs)

These 3M high quality Gyro and receiver mounting pads are double sided tape which is used to both securely hold the gyro in place but just as importantly act as a dampener between the frame and the gyro. MADE from 3M material, with 2.5mm of thickness, 6pcs in a set
This allows for shock absorption from the Helicopters natural vibration.
Each pad is cushioned to help to eliminate vibration

Fits All Gyros, servos and more !!

These 3m high quality Gyro and receiver mounting pads are double sided tape which is used to both securely hold the gyro in place but just as importantly act as a dampener between the frame and the gyro.
This allows for shock absorption from the Helicopters natural vibration.
Each pad is cushioned to help to eliminate vibration.

4 PCS in set

JST-XH 3s Lipo Balance Extension Lead (JST-XH) 20cm This extension made from 24awg cable. produced in Germany

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

JST-XH 4s Lipo Balance Extension Lead (JST-XH) 30cm This extension made from 24awg cable. produced in Germany

Super hard screwdriver head made by high alloy steel (HSS) ,wear and distortion resisting! Chrome vanadium steel, high hardness, durability.
Ergonomic Anodized CNC aluminum handle , inside place for components and screws!

4 Hex screwdrivers bits in set, with the following sizes.

1.5mm
2.0mm
2.5mm
3.0mm
Wrench Base Handle

Hot of the press, literally, the Circularly Polarized SpiroNet antennas are without doubt the best replacement available for your stock whip antennas. Manufactured to extremely high tolerances and 100% tested on a Rhode & Schwartz analyzer, these antennas yield unparalleled results when compared to hand made variants or DIY antennas.

Left-hand circular polarization or (RHCP) have well and truly been established as the antenna of choice for 5.8GHz FPV use and now you can enjoy the benefits without the head scratching involved in making them yourself. The Antennas include standard SMA connector. The Hard case enclosure will ensure that your antennas are never damaged or bent out of shape while handling or after a ruff landing while the flexible cable ensures easy positioning for optimum performance. 

Specifications:

• Clover (TX) weight: 7.7g
• Skew (RX) Weight: 8.6g
• Connector: SMA 
• Case size: 33.5m(w) 16mm(h)
• Cable Length: 73mm(skew) 33.5mm(clover)

 

Hot of the press, literally, the Circularly Polarized SpiroNet antennas are without doubt the best replacement available for your stock whip antennas. Manufactured to extremely high tolerances and 100% tested on a Rhode & Schwartz analyzer, these antennas yield unparalleled results when compared to hand made variants or DIY antennas.

Left-hand circular polarization or (RHCP) have well and truly been established as the antenna of choice for 5.8GHz FPV use and now you can enjoy the benefits without the head scratching involved in making them yourself. The Antennas include standard SMA connector. The Hard case enclosure will ensure that your antennas are never damaged or bent out of shape while handling or after a ruff landing while the flexible cable ensures easy positioning for optimum performance. 

Specifications:

• Clover (TX) weight: 7.7g
• Skew (RX) Weight: 8.6g
• Connector: SMA 
• Case size: 33.5m(w) 16mm(h)
• Cable Length: 73mm(skew) 33.5mm(clover)

 

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

• USB interface connects to the computer and use measurement software for analysis and observation.
• With the aid of the lifting bracket, the height can be adjusted, and the zoom can be 1-500X continuously.
• This digital microscope provides true 5MP pixels with clear image quality for ease of use.
• Support some mobile phones with OTG function, with 8 white LED lights, easy to operate and use.
• With lifting bracket, the observation is more stable and it is more convenient to use.

Main Control Chip: Dedicated Master for DSP
Magnification: 1X-500X
Photo/Video: Built-in
Pixel: Real 5MP Pixels
Auxiliary Light Source: 8 White LED Lights
Static Resolution: 640x480, 1280x960, 1600x1200, 2034x1536, 2592x1944
Imaging Distance: Manual Adjustment 0-3cm
Support System: Support for Win XP/Vista/Win 7/Win 8/Win 10 (Computer or Tablet), for Android (for Android Phone with OTG Function)
Application Software: Hotviewer (for PC), HotMicroscope (for Android)
Connection Method: USB Wired Connection
Power Supply: USB (5V DC)
Dynamic Frames: 20-30f/s under 600 LX Brightness
Illumination Range: 0-30000LX Wire Control Adjustable
Color: Gray
Product Size: Approx. 144 x 37 mm
Weight: Approx. 643g

Package List:

• 1 x Microscope
• 1 x Base
• 1 x Lifting Rod
• 1 x Fixing Buckle
• 1 x OTG Adapter

 

JST-XH 5s Lipo Balance Extension Lead (JST-XH) 30cm
This extension made from 24awg cable. produced in Germany

Super hard screwdriver head made by high alloy steel (HSS) ,wear and distortion resisting! Chrome vanadium steel, high hardness, durability.
Ergonomic Anodized CNC aluminum handle , inside place for components and screws!

6 Hex screwdrivers bits in set, with the following sizes.

1.5mm
2.0mm
2.5mm
3.0mm
4.00mm
Phillips Bit
Hex Nut Driver 10mm

Wheel Wrench Base Handle

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

Module size: 42.7mm*20.7mm*8.1mm

Direct Input of 60V , 24V output with 5A current for long-term stable operation.

Note: The module can work stable at 5A under the condition of good heat dissipation. If there is no heat dissipation measures, it is recommended to use it within 3.5A.

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

7.4V Li-po Battery Indicator Display Board Energy Storage Monitor 2S

• High reliability, low cost and compact size.
• Flash LED for low charge warning.
• Optional memory to recall the amount of electricity.
• Special design to monitor the battery power level while charging or discharging.
• Provides instant battery status to enable efficient charge management.
• 4-segment LED bar graph display.
• Easy to install and use.

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

Direct Upgrade to Pitch rods, Stronger and lighter.

Titanium Gr5 Linkage rod SET with counter threads, made from Titanium, Rolled tread M3.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.

Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Unparalleled durability and performance without compromise
Weight roughly 45% less than steel turnbuckles
Meticulously engineered to excel under the most demanding conditions
CNC-machined from high grade Gr5 billet Titanium

Pack include 2 rods

See the other images to understand the tech drawing sizes.

Composit Prop 9X3.8 Electro

Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.

Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

- Composite Propeller

- Suitable GP & EP

Composit Prop 9X4.7 Electro

Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.

Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

- Composite Propeller

- Suitable GP & EP

This is the ABS material Spacer for Sky hero machines. it is higher (40mm) and usually used with Clamp (avclamp) as a set.

1 Spacer is in the set

Cable - Fuel line Mounting holder will hold your cables or Fuel line, eliminating vibrations and make it looks professional.
Diameter of 7mm allows to pass safely silicone line/tygon or some wires
Can be mounted with Adhesive sticker (supplied) or with screws
Arrange your cabling nicely across the helicopter

Length +-30mm
Wide: 10mm
Color: BLACK

Including a Pack of 5