Amass

Amass 200mm XT60 Male Connector to Male DC 5.5X 2.1mm Adapter Power Cable For FPV Goggles Battery

This adapter cable can transfer the RC Drone battery (XT60/ XT30/ T plug) to the goggles battery plug (DC5.5 2.1 plug)

Description:
Brand name: Amass
XT60 to 5.5/5.5mm DC
Length: 200mm
Suitble for FPV system
 
Package Included:
1x Amass XT60 to 5.5/5.5mm DC power cable

The AS150U Anti-Spark waterproof connector is perfect for high-current applications as it utilizes gold plated brass 7mm bullets rated up to 140A and can accommodate up to 8 AWG wires.
This anti-spark system will prolong the life of your connectors and electronics on high-voltage setups.
The connector also has 4 signal pins that can be used, as applicable.

All plugs with signal pin versions can be connected to smart batteries or chargers via signal pins to read battery/charger information

Specifications:
Item No. : AS150U
Metal material: Brass gold plated
Plastic material: PA66
FR Level: UL94 V0
Recommend USE: Battery
Temperature rise: 70A ＜70℃ (1Hour)
Weld mental: Main copper3.3; Signal pin 2.5
CR: 0.40mΩ
Rated voltage: ＜DC 500V
Rated Current (RC): 70A
Instantaneous current: 140A
Use times: 1000 times
Temperature rise: 140A ＜80℃(1min)
Insertion Force: 3-5kg
Temperature: 20℃ to 120℃

• Included:

Male x1 + Female x1

This connector features an insulated tip to stop big sparks from higher voltage applications.

This coupled with the plastic self insulating shroud offers a safe and effective connector package with no shrink tube needed.

Note:

When powering on, please connect the plug without yellow collar first, and then connect the plug with yellow collar.

There is a Anti Spark Protector in plug with yellow collar. (Please refer to the picture below.)

Features:

• Patented anti-spark design
• Open side for easy soldering
• Low resistance cladding
• Reusable threaded end design, easy to insert / take off from protect case
• Tightening ring on Female side to prevent losses after long time use

Specification:

Ø7mm continuance current: 150A

Peak current: 200A

Battery Copper bridge bars, to solder packs together.

Made from Copper , excellent resistance to Vibrations, and Zero Loss of Energy.

Pack of 10

High performance Deans connector (T connect )for use with higher power Lipo batteries.

Once soldered correctly, you can't plug the Ultra Plug in wrong. That's because the connection features two bars or "tabs" that are perpendicular to each other.
A great way to protect your investment
Set including Male & Female connectors with protection caps

5 sets ( 5 male+5 female).
Great Saving package

High-quality EC5 connectors should be a staple for every workbench. Those are 5MM bullet connectors, perfect for High current electric power applications and work with any battery, charger, ESC, Power Meter, etc. They are ideal for high power applications.

Mega pack is 10 pairs and gives you a  saving of 25% over single set.

• Set inclusive of 10 Pairs ( each pair is 2 Male, 2 Female +2 housings)
• Capable of 120 Amps continuous current
• Ergonomically pleasing and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's advanced applications
• Designed with convenience and reliability in mind

High-quality EC5 connectors should be a staple for every workbench. Those are 5MM bullet connectors, perfect for High current electric power applications and work with any battery, charger, ESC, Power Meter, etc. They are ideal for high power applications.

• Set inclusive of Pair ( 4 con+2 housings)
• Capable of 120 Amps continuous current
• Ergonomically pleasing and easy to grip
• Protected to avoid shorting and reverse polarity
• Superior technology suited to today's advanced applications
• Designed with convenience and reliability in mind

EC3 Battery Connector  for connecting to your battery, speed control, charger, power meter or similar applications!!
Hook up RC battery to electronic.
These have low resistance, and gives the best electric flow.
Diameter: 3.5mm.

Included:

•   1 x Male EC3 blue over
•   1 x Female EC3 blue over
•   2 x Male 3.5mm Gold Bullet
•   2 x Female 3.5mm Gold Bullet

EC3 Connectors for connecting to your battery, speed control, charger, power meter or similar applications!!
Hook up RC battery to electronic.
These have low resistance, and gives the best electric flow.
Diameter: 3.5mm.

Mega pack gives you huge savings , over 20%

Included:

10 sets of EC3 connector, each set including:

•   1 x Male EC3 housing
  
•   1 x Female EC3 housing
•   2 x Male 3.5mm Gold Bullet
•   2 x Female 3.5mm Gold Bullet

EC5 (MALE) to TRX traxxas (Female) Adapter for Batteries with EC5 connector

use your original pack which has EC5 battery connector to fit Traxxas cars or connector

Fixed XT60-L Plug Connector Gold with Sheath Housing (1 Pair)

Body material and surface coating: Brass and gold plated

• Insulation Material: PA
• Internal Resistance: 0.8mΩ
• Max RC/MC:60A/100A
• Temperature Resistance:-20℃~120℃
• Insertion Force/500:3KG
• Weight/pair: 7.85g per pair

Unique advantages

• Raw material,without poison and lead, accords with ROHS
• 24k gold plated, with 0.05um thickness, insure to use thousands of times without fall out, makes plug safe, prevents oxidation,extends lifespan
• Well conductivity, steady, constant temperature, continuous discharge

Gold contact connector system 4 mm (20 pcs)
CT-4 Versatile low-priced 4 mm gold-contact system. The standard connector system for all medium and high current range applications. Compatible with existing 4 mm gold-contact plugs. Ideal for connecting batteries in series.

Mega pack gives you huge savings -over 20%

• Short design, (36 mm)High contact security,
• low contact resistance
• Secure against short-circuit and reverse polarity
• Accepts cable up to 2.5 mm2
• Load current up to 50 A

GO-4 4 mm gold-contact connectors are 4 mm diameter  high current gold-contact connector,They are high quality, gold plated.The standard connector system for all applications in the medium and high current range with low contact resistance and high connection cycles.

Accepts cables up to 4 mm and perfect for currents up to 60 amps

Set including 2 pairs, 2 male+2 female ( total of 4 pieces)

Gold contact connector system 4 mm
CT-4 Versatile low-priced 4 mm gold-contact system. The standard connector system for all medium and high current range applications. Compatible with existing 4 mm gold-contact plugs. Ideal for connecting batteries in series.
Short design, (36 mm)High contact security,
low contact resistance
Secure against short-circuit and reverse polarity
Accepts cable up to 2.5 mm2
Load current up to 50 A

The new Green 6.5 connectors will handle up to 200 amps of continuous current without breaking a sweat at any voltage level used in r/c applications. The housing making them easier to grip, they accept up to massive 6 AWG wire
Batteries and ESCs aren’t the only things they’re useful for though. Use them on your charger leads, parallel and series harnesses, high current amp/watt meters, and anything else that needs super high current.

Power Hungry? Go Green!

Connector size

• 6.5mm gold connector
• Max wire gauge
• 6 AWG
• AmPerage capability
• 200A continuous

Included:
Set of 6.5mm gold Connectors - Male/Female, Single Pack (includes 2 male connectors, 2 female connectors, and 2 housings)

Rated up to 180 amps, 6mm gold connector, with Housing, to avoid reverse polarity by mistake and also accidental shortcuts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to around 180A , Excellent for high current systems., and High voltage setups.
Pack includes 2 male, 2 female, 2 housings

Heavy Duty Gold connectors 6mm 2M+2F No housing

Set include 2 Male+ 2 Female

Rated up to 180 amps, 6mm gold connector, with Housing, to avoid reverse polarity by mistake and also accidental shortcuts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to around 180A , Excellent for high current systems., and High voltage setups.
Mega pack allows you over 20% saving over single pack price.

10 x sets (each set includes 2 male, 2 female, 2 housings)

 Deans-T type male to XT60 female adapter.

This adapter is very helpful when you need to connect heterogeneous connectors

The MR30 ensures a solid high-amp connection, perfect for applications up to 30A constant.

Features

• Lightweight
• Short circuit protection
• Specifications
• Brand Name: Amass
• Item Name: MR30 connector
• Body Material and Surface Plating: Brass and gold plated
• Insulation Material: PA66
• Original Internal Resistance: 0.8MΩ
• 500 Times Internal Resistance: 0.85MΩ
• Max. Continuous Current: 30A (within 30 minutes)
• Max. Instantaneous Current: 40A (within 1 minute)
• Recommended Cable Spec: 18AWG 2.8mm diameter
• Recommended Soldering Spec: 400° C/3S
• Weight: 1.2g/pcs
• Insulation Degree: UL94V-0
• Machine live: 3000 Times
• Suitable for connecting ESCs, Motors, RC Airplanes

MT60 3.5mm 3-pin Motor connector set.

Made from high-temp Nylon and 3.5mm gold plated spring connectors.

Includes:

• 1x male connector
• 1x female connector
• 2 x wire guiding sleeves

This is a pack of QS10P Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS10P connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 10mm gold plated brass bullet style connection these QS10P connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS10P Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 10mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.51m
• Rated Voltage: DC 750W (500V)
• Peak Current: 240A
• Constant Current: 180A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4-10 AWG

Includes:

• (1) Male QS10P Anti-Spark Connector
• (1) Female QS10P Anti-Spark Connector
• (2) Connector Covers
  

QSP10P-L is a new member of QS series, which is specially designed for high current charging such as new energy, energy storage, folding lithium electric vehicles, electric motorcycles and electric bicycles. QSP10P-L has a wire-throwing sheath. It has many advantages such as small volume and large current, and the current can reach 210-270A.

Utilizing a 10mm gold plated brass bullet style connection these QS10P connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS10P Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 10mm Gold Plated Brass Bullet Connectors

Specifications:

Model: QS10P-L.

Plastic material: Nylon.

Connector material: gold plated copper 8mm.

Maximum temperature: 200 ℃.

Rated voltage 600 V.

Temperature range: 30 ° C to 200 ° C

Maximum: six stars.Current: 210A-270A.For large current

Customizable wire: provide specifications(Recommended Wire:4AWG-10AWG)

Includes:

• (1) Male QS10P Anti-Spark Connector
• (1) Female QS10P Anti-Spark Connector
• (2) Connector Covers
  

This is a pack of QS10 Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS10 connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 10mm gold plated brass bullet style connection these QS10 connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS10 Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 10mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.20mΩ
• Rated Voltage: DC 500V
• Peak Current: 270A
  
• Constant Current: 210A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4 AWG

Includes:

• (1) Male QS10P-S Anti-Spark Connector
• (1) Female QS10P-S Anti-Spark Connector

This is a pack of QS10 Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS10 connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 10mm gold plated brass bullet style connection these QS10 connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS10 Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 10mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.20mΩ
• Rated Voltage: DC 500V
• Peak Current: 270A
  
• Constant Current: 210A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4 AWG

Includes:

• (1) Male QS10P-U Anti-Spark Connector
• (1) Female QS10P-U Anti-Spark Connector

This is a pack of QS12 Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS12 connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 12mm gold plated brass bullet style connection these QS12 connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS12 Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 12mm Gold Plated Brass Bullet Connectors
• 4 Pin telemetry data
  

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.20mΩ
• Rated Voltage: DC 500V
• Peak Current: 320A
  
• Constant Current: 250A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4 AWG

Includes:

• (1) Male QS12 Anti-Spark Connector
• (1) Female QS12 Anti-Spark Connector
• (2) Connector Covers
  

Item Name: Anti spark Connector
Item NO.: QS5-3p
Color: Black
Diameter: 5.00mm
Pins: 3P
Metal Material: Gold Plated Brass
Plastic Material: PA66
Max Current: 40A
Instantaneous Current: 90A
Voltage: up to 300V
Weight: 22.1g
Usage: for UAV, intelli Battery, Charger, RC Drones Boats Mower Electric Car ect.

Features:
- This gold plated bullet connector has an anti spark protection
- These are a must for high current/high voltage brushless power systems with intelli batteries, for telemetry or signals
- Sold in pairs Male & Female.

Package Included:
1 x Male Connector
1 x Female Connector

QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.

The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage.

NOTE: T-style connector shown in photos is for size reference only, and is not included.

Features:

• Anti-Spark Technology Increases Lifespan of Connector
• 110A Constant/300A Peak Current Rating
• 8.0mm Gold Plated Brass Bullet
• Great for all High Voltage Applications
• Nylon/Fiber Composite Housing
• Package Includes One Female Connector, One Male Connector & End Cap

Specifications:

• Connector Diameter: 8.00mm
• Metal Material: Gold Plated Brass
• Plastic Material: Fiber Nylon Comp
• Flame retardant rating: UL94 V0
• Temperature Range: 200C Max
• Rated Voltage: 600V DC
• Continuous Current: 110A
• Peak Current: 300A+
• Weight: 41g (Male+Female Set)
• Total Length: Approx 70mm (Male & Female w/End Cap)
• Width: 29.5mm
• Max Wire Gauge: 6awg

Includes:

• (1) QS8 Female Anti-Spark Connector
• (1) QS8 Male Antispark connector
• (2) Connector Covers
• (2) Wire Caps ( rubber protection)

To solder those connectors we recommending to use Big soldering systems, e.g 150-200W

C Heavy Duty QS8 Charge Lead, featuring a male QS8 on one end connected to 4mm banana plugs with high quality 10awg silicone wire. Package includes one charge lead.

Cable of 300mm, with 6mm silicone wire, Banana connectors.

Set of 1 cable

This is a pack of QS8P-L Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS8 connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 8mm gold plated brass bullet style connection these QS8P-L connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS8P-L Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 8mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.20mΩ
• Rated Voltage: DC 600V
• Peak Current: 180A
  
• Constant Current: 120A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4 AWG

Includes:

• (1) Male QS8P-L Anti-Spark Connector
• (1) Female QS8P-L Anti-Spark Connector

This is a pack of QS8 Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS8 connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 8mm gold plated brass bullet style connection these QS8 connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS8 Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 8mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.20mΩ
• Rated Voltage: DC 500V
• Peak Current: 180A
  
• Constant Current: 120A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4 AWG

Includes:

• (1) Male QS8P-S Anti-Spark Connector
• (1) Female QS8P-S Anti-Spark Connector

This is a pack of QS8 Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS8 connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 8mm gold plated brass bullet style connection these QS8 connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS8 Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 8mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.20mΩ
• Rated Voltage: DC 500V
• Peak Current: 180A
  
• Constant Current: 120A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4 AWG

Includes:

• (1) Male QS8P-U Anti-Spark Connector
• (1) Female QS8P-U Anti-Spark Connector

This is a set of Special High current connectors with Anti spark adding 4 Pins FOR DATA or misc connection, e.g temp sensor, data, and more.

Those are 8mm connector with special Anti-spark device installed so even with huge power applications  you will avoid Sparks.

Connectors are Gold plated to avoid corrosion and allow perfect conduct.

Possible to buy as 1 set or set of 8 (cost saving)

Color is black

1 set including 1 Male, 1 Female

Specification:

• Connector Housing: nylon with fiber.
• 8mm Anti-spark with 5.1 ohm
• Banana material: gold plating brass
• set Weight: 36g
• Under highest temperature: 200 degree
• Biggest wire:8-12 AWG
• Current: 120A~200A

Please note , you need a Heavy duty soldering Iron for those connectors, we recommending 200W stations

Want to connect DEANS Packs in serial? Here is the solution.

Adaptor to connect in serial with Deans connectors, with Heavy duty Silicone Wires

XT30 is the new connector on the block and it is perfect for Mini RC use. Set including MALE and Female

Made from high-temp Nylon and gold plated spring connectors, both are included in the same injection mold at the time when forming the connector. The XT30 ensures a solid high-amp connection, perfect for applications up to and beyond 35A constant.

Features:

• Gold plated Connections
• Long connection contact points for better current flow
• Fills a gap for the Mini connectors
• Small and light weight

Specs:

• Amps: 30A Continuous
• Weight:1.7g