Align T-Rex 800E

Use for T-REX 800E DFC.

Specification

• 800E DFC Carbon Main Frame(R)-2.0mm × 1

Designed specifically for attaching the aerial photography gimbals to T-Rex 800E. The assembly features high rigidity to withstand the higher payload of aerial photography equipment and increase the stability during takeoff/landings. Specification: Skid Pipe A x 4 Skid Pipe B x 2 Skid Pipe C x 1 Skid Pipe x 2 800E upper landing gear mount x 2 Landing Skid T-type Mount x 6 Landing Skid Y-type Mountx 4 Socket collar screw x 4(M3 x 12mm) Socket collar screw × 4(M3x22mm) M3 nut - Silver x 4 M4 set screw - Black x 20

700E ESC Mount × 1(65.2x62x2mm) 800E ESC Mount × 1(102x65.2x2.5mm)

Must with H80T010XXT 800E Auxiliary battery mount set.

Specification:

• Auxiliary Battery Board (120x50x2mm) x 2

Specially designed auxiliary battery mount set to balance the helicopter when gimbal system is used, provides proper CG for better flight stability.

Dedicated APS sensor unit mounting platform to simplify installation.

Specification: Auxiliary Battery Board (100x40x2mm) x 2 Auxiliary Battery Mount Side Plate (100x19x2mm) x 2 Auxiliary Battery Boom Clamp– Left (58x8x59mm) x1 Auxiliary Battery Boom Clamp– Right (58x8x60mm) x1 Auxiliary Battery Boom Clamp(GPS) – Left ( 58x8x61mm ) x1 Auxiliary Battery Boom Clamp(GPS) – Right ( 58x8x62mm ) x1 GPS Mounting Plate (41x12x14mm) x1 GPS Mounting Mast (30x38x3.5mm) x1 Flat Head Socket Cap Screw (M2.5x6mm) x16 Socket collar screw(M3x20mm) x1 Socket collar screw(M2.5x8mm) x1 Strap x 2 Hook & Loop fastening tape x 4

Tail Control Guide sleeve × 1
Carbon Tail Control Rod sleeve × 2
Carbon Tail Control Rod × 1(Φ5x902.3mm)
Linkage Rod C × 2(Φ2.5x23mm)
700NFL Ball Link × 2

800E DFC Linkage rod A × 4(M3x29.3mm)
Elevator ball link × 4
Linkage rod holder × 4(Φ6xΦ4.85x3mm)

Elevator arm × 1(55.3x25.4x21mm)
Elevator lever × 1(5x21x24.5mm)
Elevator collar × 2(Φ3xΦ4.5x1.5mm)
Bearing HF683ZZ × 2(Φ3xΦ7x3mm)
Elevator ball link × 1
Linkage ball B(M3x4) × 2(Φ5x12mm)
M4 Set screw × 1(M4x4mm)
Socket button head screw × 2(M3x8mm)
Socket screw × 1(M3x8mm)

• 800E Metal Bottom Plate × 1(266x65x7.6mm)
• Socket button head screw × 6(M3x6mm)
• Socket screw × 4(M3x10mm)

800E Metal stabilizer belt(U) × 1(35x13x15.1mm)
800E Metal stabilizer belt(L) × 1(35x13x15.1mm)
Socket collar screw × 2(M3x22mm)
Socket screw × 2(M4x12mm)
M4 Washer × 2(Φ4xΦ10x1mm)
M3 Specialty washer × 2(Φ3xΦ8x2mm)

800E Tail boom mount(Left) × 1

800E Tail boom mount(Right) × 1

Hex mounting bolt × 4(Φ2.5x60.9mm)

Socket screw × 1(M4x8mm)

Socket button head collar screw × 8(M3x8mm)

T-Rex 800E Tail Control Guide

Torque tube × 1(8x918mm)
Bearing MR148ZZ × 2(8x14x4mm)

Torque Tube Bearing Holder × 2

Align T-rex 800E DFC Main Shaft, set of 2 # H80H001

Included:

• 2x 800E DFC Shaft
• 1x Socket collar screw (M4x24mm)
• 1x Socket collar screw (M4x27mm)
• 2x Socket screw (M4x8mm)
• 2x M4 Mutter
• 1x Washer (12x16x0.8mm)
• 1x Washer (12x16x0.5mm)

Torque tube bearing holder x 2, with bearing.
EZO Made in Japan

Use for T-REX 800E DFC.

Specifications:

1. Metal plate(L) x1
2. Metal plate( R) x1
3. Metal tail unit set x1
4. Tail rotor shaft assembly x1
5. Long umbrella gear x1(F12x8.2mm)
6. Bushing x1(F12.4xF18x10mm)
7. Bearing MR126ZZ x2(F6xF12x4mm)
8. Bearing 6701ZZ x2(F12xF18x4mm)
9. Socket screw x2(M3x26mm)
10. Socket screw x4(M3x6mm)
11. Socket collar screw x1(M3x22mm)
12. M3 Specialty washer x2(F3xF8x2mm)
13. Vertical stabilizer mount x1

APS sensor mounting platform tailboom clamp (800) × 1(35x8x23.9mm)
Socket screw × 2(M3x14mm)

Align 780 Carbon Fiber Blades. These blades have been developed specifically for extreme 3D flight, featuring incredible agility and stability characteristics. The blades have a re-designed airfoil that helps to minimize turbulence at the blade tips, reducing noise and power loss. Additionally, the rigidity of the blades has been increased for improved anti-torsion characteristics during flight.

Specifications:
Shape: Symmetrical wing
Length: 780x64x8.5mm
Width: 14mm
Shaft Diameter: 5mm
Weight: 440g/set (approx)

Description:

• Suitable for T-REX 700 / 800
• The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab reinforcement and rotation smoothly, but also avoid the scratches from the rotor holder rubbing against painting surface of blade causing expected vibration in flight.

Content:

• 8x 700 Main Blade Clips
• 8x 700 Tail Blade Clips

Description:

• Use for T-REX 700E / 700L / 800E
• Suitable for Metal battery mount (H70084 / H70085), not for plastic battery mount (H70052)

Content:

• 1x 700E Latch-type Receiver Mount (L) (71x143.75x33mm)
• 1x 700E Latch-type Receiver Mount (R) (71x143.77x30.5mm)
• 2x Aluminum Hexagonal Bolt
• 1x Socket button head self tapping screw (T3x8mm)
• 2x Socket button head self tapping screw (T3x12mm)
• 2x Socket button head collar screw (M3x6mm)

Description:

• Use for T-REX 700E / 800
• Upgrade bearing parts with enhancement in more stable and durable motor rotation

Content:

• 1x Motor Pinion Gear Bearing Mount
• 1x Bearing MR126ZZ (6x13x5mm)
• 4x Socket collar screw (M3x6mm)

Description:

• Use for T-REX 700E / 800E
• Brand new low drive gear ratio with high strength and wear resistance,effectively reduce the tail vibration during speedy rotation keeping well tail lock performance and power output to prevent unexpected structure issue.
• Must use with: 102T M1 Helical Autorotation Tail Drive Gear Set H70G012X

Specifications:

• Gear Ratio 1:4.43

Content:

• 1x Front drive gear assembly M1 (5x7.8x53mm)
• 1x 23T M1 Short umbrella gear
• 1x Long umbrella gear

Description:

• Use for T-REX 700X / 700E / 800E
• Brand new low drive gear ratio with high strength and wear resistance,effectively reduce the tail vibration during speedy rotation keeping well tail lock performance and power output to prevent unexpected structure issue.
• Must use with:
• M1 Torque Tube Front Drive Gear Set / 23T H70G001NXT

Specifications:

• Gear Ratio 1:4.43

Content:

• 1x 102T M1 Autorotation tail drive gear set
• 1x 23T M1 Front drive gear assembly set

This is an optional upgraded 13.5mm thick 112T Slant Thread Main Gear from Align. The thicker gear allows for improved strength under demanding power conditions. This gear must be paired with AGH70062A or H70G010XX for best results.

Depending on the helicopter that the gear is installed on, modification to the carbon fiber frame may be needed to ensure proper fitment

• 700 tail rotor hub x 1
• Tail rotor washer(D8xD10x0.3mm) x 4
• washer(D3xD8x1mm) x 2
• M4 set screw x 2(M4x4mm)
• socket collar screw x 2(M3x8mm)
• Weight:27.19g

Use for T-REX 700E/700N/800
Must with:
700 Tail Rotor (H70T001XXW)

Use for T-REX 700X/700L/700E/800E.

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Suitable for: 104T M1 Autorotation tail drive gear set(H70G007XXT)

Front drive gear assembly x 1(22T) (F5xF7.8x53mm) Modulus:1

Short umbrella gear - Red x 1(M1/24T)

Long umbrella gear - Red x 1(M1/24T)

Tail Drive Gear Spacer(0.3) x 1(F12xF15x0.3mm)

Use for:  T-REX 760X

6061-T6 Aluminum alloy material and CNC processed.

Specification:

• 760X Linkage Rod A x 2 (M3x35mm)
• 700X Linkage Rod A x 3 (M3x41mm)
• 700 Elevator Ball Link x 10 (F5xF6x19mm)
• 700DFC Linkage Rod Holder x 10 (F6xF4.85x3mm)

Description:

• Suitable for T-REX 700E / 800E
• Highly enhance structural strength, effectively increase the torsional capability
• Must use with: Motor Slant Thread Pinion Gear 13T M1 27H70G009AXT

Specifications:

• Height: 13.5mm
• Teeth: 110
• Modulus: M1

Content:

• 1x CNC Slant Thread Main drive gear 110T M1 13.5

This is an Align 800E 115mm Carbon Fiber Tail Blade Set. These tail blades have been designed to provide optimal tail locking performance under high head speed and extreme flight conditions.
   
Specifications:

• Shape: Symmetrical wing
• thickness: 4.9mm
• Shaft Diameter: 3mm
• Weight: Approx. 12g/set

Use for T-REX 700 / 760 / 800 with Three-Blade Rotorhead

Content

• 1x 700E Three-Blade Rotor Housing (17x22.9x46.5mm)
• 3x 700 DFC Head Damper (10x17x7mm)
• 3x 700N Feathering Shaft Washer (10x16x1mm)
• 2x Socket button Head Collar Screw (M4x24mm)
• 2x M4 Nut

Suitable for T-REX 700 / 760 / 800 with Tri-Blade Rotorhead
6061-T6 Aluminum alloy material and CNC processed

Content

• 1x Three-Blade CCPM metal swashplate set
• 1x Long Linkage ball (M3x4) (5x28mm)
• 1x Linkage ball D (M3x3.5) (5x9.3mm)
• 5x 700N Linkage ball B (M3x4) (5x12mm)

Use for T-Rex 700 / 760 / 800 with Three-Blade Rotor Head

Content

• 1x 700E Tri-Blades Control Arm Set
• 2x Washer
• 2x Socket Screw (M3x10mm)

Use for T-REX 700 / 760 / 800 with Tri-Blade Rotorhead

Content

• 6x 700E Tri-Blades Head Feathering Shaft Screw

Description:

• Use for T-REX 800 / 700 Nitro Pro / 700E
• Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
• Must use with:
  • 700 Metal Tail Rotor Holder (H70T001XXT/H70T001AXT)

Content:

• 1x Tail rotor shaft assembly
• 1x Long umbrella gear

Description:

• Suitable for T-REX 700E / 700N / 700 F3C / 800E
• Must use with: 700FL Flybarless Rotor Head System H70H002XXT

Content:

• 2x Metal Main rotor holder arm
• 2x Linkage ball B (M3x4) (5x10.5mm)
• 4x Socket collar screw (M3x6mm)

Description:

• Suitable for T-REX 700X / 700L / 700E / 700N / 800E
• Must use with:
• 700FL Flybarless Rotor Head System H70H002XXT

Content:

• 1x Main Rotor Housing
• 2x Feathering shaft sleeve
• 2x Damper Rubber
• 2x Socket Button Head Collar Screw (M4x24)
• 2x Locking nut (M4)
• 2x M4 Washer