Transmitter Carbon fiber tray for DJI MAVIC PRO.

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick carbon composite material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI MAVIC PRO.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 250 x 165 x 130 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)

FPV Carbon tray Tablet holder adaptor for carbon trays

Stable FPV extension for transmitter trays in modern carbon design.
The FPV expansion is well suited for the video flight with Coptern, airplanes or helicopters.

For rear mounting of the monitor.
for foot mounting or side mounting requires one additional parts.

Compatible with our tablet holder.

Material: Carbon black GF3

• Weight about 200 g
• FPV without transmitter tray, without transmitter, without monitor, without accessories & without rubber hand rest pads.

FrSky HORUS X12S black GFK fiber Transmitter Tray

The desk is made of high quality, 2mm thick GFK fiber material with support bars made of stainless steel, the radio can be worn optimally.

The transmitter tray is suitable for transport in any standard aluminum case.

This radio tray fits:

• Horus (FrSky)

Specifications:

• Material: carbon composite material
• Dimensions: 340 x 170 x 125 mm
• Weight: 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

*Transmitter Horus NOT included!

FrSky Taranis X9D in Black GFK fiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 305 x 160 x 145 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)

Futaba T14SG Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Size: 255 x 153 x 150 mm
• Weight: about 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Very stable transmitter tray in a modern BLACK g10 stainless steel design

The tray is made of high-quality G10 composite material with sturdy suspension

brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the transmitter's battery compartment are freely accessible.

The transmitter is firmly fixed in the transmitter TRAY, it cannot fall out, the transmitter can be quickly removed from the console.

The transmitter tray brackets and aluminum connectors are mounted in the precisely fitting millings of the carbon plates and screwed together with stainless steel screws.

Made in germany

Material:

Upper and lower plate, intermediate elements made of g10 composite material

Connector between the plates made of black anodized aluminum

Standard transmitter tray bracket made of stainless steel

Dimensions:

Width: 280 mm

Depth without transmitter: 185 mm / with bracket 255

Height with standard transmitter bracket: 132 mm

Height with transmitter bracket: 162 mm

The desk is delivered as a kit including the necessary tools.

Scope of delivery: Transmitter tray with standard transmitter desk bracket no hand rest.

The tray is of course delivered without transmitter, without FPV extension and without belt.

Very stable transmitter desk in a modern carbon stainless steel design with a real and beautiful carbon 3K twill surface.

The desk is made of high-quality carbon composite material with sturdy suspension

brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the transmitter's battery compartment are freely accessible.

The transmitter is firmly fixed in the transmitter TRAY, it cannot fall out, the transmitter can be quickly removed from the console.

The transmitter tray brackets and aluminum connectors are mounted in the precisely fitting millings of the carbon plates

and screwed together with stainless steel screws.

No foil - no carbon imitation - made of real carbon!

Made in germany

Material:

Upper and lower plate, intermediate elements made of carbon composite material

Connector between the plates made of black anodized aluminum

Standard transmitter tray bracket made of stainless steel

Dimensions:

Width: 280 mm

Depth without transmitter: 185 mm / with bracket 255

Height with standard transmitter bracket: 132 mm

Height with transmitter bracket: 162 mm

The desk is delivered as a kit including the necessary tools.

Scope of delivery: Transmitter tray with standard transmitter desk bracket no hand rest.

The tray is of course delivered without transmitter, without FPV extension and without belt.

Futaba T16SZ black GFK fiber Transmitter Tray

Very stable transmitter tray in the modern GFK stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick GFK material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Weight: about 300 g
• Transmitter tray without transmitter without FPV, neckstrap & without rubber hand rest pads.

Futaba T16SZ carbon Transmitter Tray

Very stable transmitter tray in the moderncarbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Weight: about 300 g
• Transmitter tray without transmitter without FPV, neckstrap & without rubber hand rest pads.

Futaba T18MZ Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Size: 255 x 153 x 150 mm
• Weight: about 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Futaba T18SZ & T16SZ G10 COMPOSITE black radio tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick g10 material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: g10 BLACK
• Weight: about 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Futaba T18SZ Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Weight: about 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Futaba T26SZ carbon Transmitter Tray

Very stable transmitter tray in the moderncarbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Weight: about 300 g
• Transmitter tray without transmitter without FPV, neckstrap & without rubber hand rest pads.

Futaba T32MZ Carbonfiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick carbon fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

• Material: Carbon composite material
• Dimensions: approx. 305 x 160 x 145 mm
• Weight: approx. 290 g
• Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
• Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

• HAB (Hand rest Rubber pad B for Tray station-Black)

Futaba T6K G10 Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

Dimensions:  Width: 295 mm
Depth without transmitter: 150 mm
Height with standard transmitter stand: 138 mm
Height with folding transmitter panel bracket: 168 mm / folded: 113 mm

• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Futaba T8J & T10J Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick omposite material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Carbon
• Size: 255 x 153 x 150 mm
• Weight: about 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Modern and comfortable rubber hand rest pad for our Tray station:

• DX5
• MC16
• MC20
• MC32

The hand rest pad made from foam rubber is red in the colors and available black.

Supply: 2 hand rest pads, without Tray station & without FPV.

Modern and comfortable rubber hand rest pad for our Tray station:
 

• Jeti DC16
• Jeti DS16
• FrSky Taranis
• Spectrum DX9
• Phantom DJI.

The hand rest pad made from foam rubber is black in the colors and available black.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

Modern and comfortable rubber hand rest pad for our Tray station:
 

• Jeti DC16
• Jeti DS16
• FrSky Taranis
• Spectrum DX9
• Phantom DJI.

The hand rest pad made from foam rubber is blue.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

Modern and comfortable rubber hand rest pad for our Tray station:
 

• Jeti DC16
• Jeti DS16
• FrSky Taranis
• Spectrum DX9
• Phantom DJI.

The hand rest pad made from foam rubber is orange.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

Modern and comfortable rubber hand rest pad for our Tray station:
 

• Jeti DC16
• Jeti DS16
• FrSky Taranis
• Spectrum DX9
• Phantom DJI.

The hand rest pad made from foam rubber is red in the colors and available black.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

JETI DS-16 Carbon Transmitter tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Material: Carbon

• 310 x 150 x 150 mm
• Weight: about 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.
  

JR 14 Carbon Transmitter tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Material: Carbon

• 310 x 150 x 150 mm
• Weight: about 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Mikado VBar Control black Carbon composite Transmitter Tray

Very stable transmitter desk in a modern carbon stainless steel design with a real and beautiful carbon 3K twill surface.

The desk is made of high-quality carbon composite material with stable suspension

brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the battery compartment of the transmitter are freely accessible.

The transmitter is firmly fixed in the transmitter console, it cannot fall out, the transmitter can be

quickly removed from the console without tools .

The transmitter console brackets and aluminum connectors are mounted in the precisely fitting millings of the carbon plates

and screwed together with stainless steel screws.

The transmitter console fits in the original case or in a standard aluminum case for transport.

Alternatively, we offer you foldable transmitter desk brackets, which when folded reduce the height of the transmitter desk by 5 cm.

Specification:

• Material: Carbon fibre
• Size: 300 x 180 x 150 mm
• Weight: about 300 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

SPEKTRUM DX6 (V2, G2, G3) & DX7 & DX8 G2 in carbon Transmitter tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

The desk is made of high-quality carbon composite material with sturdy suspension
brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the battery compartment of the transmitter are freely accessible.

Material: Carbon

• 310 x 150 x 150 mm
• Weight: about 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

SPEKTRUM DX6 Composite Transmitter tray

Very stable transmitter tray in the modern composite stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick composite fiberglass material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Material: Black composite fiberglass

• 310 x 150 x 150 mm
• Weight: about 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

SPEKTRUM DX8 & DX9 Carbon Transmitter tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Material: Carbon

• 310 x 150 x 150 mm
• Weight: about 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

SPEKTRUM DX9, DX8 & DX7s black G10 Transmitter tray

Very stable transmitter tray in a modern design made of fiberglass with hand rests in carbon look.

The desk is made of high-quality fiberglass plastic with sturdy suspension

brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the battery compartment of the transmitter are freely accessible.

The transmitter is firmly fixed in the transmitter console, it cannot fall out, the transmitter can be

quickly removed from the console without tools .

The transmitter console brackets and aluminum connectors are mounted in the precisely fitting millings of the GRP panels

and screwed together with stainless steel screws.

The transmitter console fits in the original case or in a standard aluminum case for transport.

Alternatively, we offer you foldable transmitter desk brackets, which when folded reduce the height of the transmitter desk by 5 cm.

Material: Carbon

• 310 x 150 x 150 mm
• Weight: about 290 g
• Transmitter tray without transmitter without FPV & without rubber hand rest pads.

Very stable transmitter tray in a modern design made of G10 fiberglass with carbon-look hand rests.

The console is made of high-quality fiberglass plastic with stable stainless steel suspension brackets,

which are ideal for carrying the transmitter. All connections and the battery compartment of the transmitter are freely accessible.

The transmitter is firmly fixed in the transmitter desk, it is not possible to fall out, the transmitter can be quickly removed from the desk without tools.

The transmitter Tray brackets and aluminum connectors are mounted in the precisely fitting millings of the GRP plates and screwed with rustproof stainless steel screws.

The transmitter Tray fits in the original case or in a standard aluminum case for transport.

Alternatively, we offer you foldable transmitter desk brackets, which reduce the height of the transmitter desk by 5 cm when folded.

Dimensions:

Width : 295 mm
Depth without transmitter: 150 mm
Height with standard transmitter bracket: 147 mm
Height with foldable transmitter bracket: 177 mm / folded: 122 mm

Spektrum NX6, NX8 & NX10 in black GFK fiber Transmitter tray

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter tray is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

Dimensions:
Width: 295 mm
Depth without transmitter: 150 mm
Height with standard transmitter stand: 147 mm
Height with foldable transmitter panel bracket: 177 mm / folded: 122 mm

Spektrum NX6, NX8 & NX10 in CARBON fiber Transmitter tray

The Tray is made of high-quality, CARBON fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter tray is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

Dimensions:
Width: 295 mm
Depth without transmitter: 150 mm
Height with standard transmitter stand: 147 mm
Height with foldable transmitter panel bracket: 177 mm / folded: 122 mm

ST10 Yuneec Q500, ST10+, Typhoon & Blade Chroma black composite Transmitter Tray

Very stable transmitter tray in the modern composite stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick composite fiberglass material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

• Material: Composite fiberglass
• Size: 290 x 180 x 150 mm
• Weight: about 300 g
• Transmitter tray without transmitter without FPV, monitor tray & without rubber hand rest pads.

Stainless steel thumbscrews for faster assembly tablet holder adaptor for carbon trays

Stainless steel thumbscrews for faster assembly and disassembly of the FPV extension on the transmitter desk ..
Fits the transmitter consoles with FPV extension.

Kit contains:

• 4 knurled screws and 4 knurled nuts, without FPV extension, without transmitter desk, without transmitter and without monitor