< 200 Kits & combos

TITAN DC5 w/ DJI Air Unit BNF built for  the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This TITAN DC5 BNF is 5 inch quad which is no prop in view, equipped SucceX-D F7(50A 4-in-1 ESC) Stack and popular XING motor, everything you just need to bind and fly!

This model can accept up to 6s, but the motors mounted are designed to be used with 4S.

You can use Any radio you want, you will need to add your receiver and bind and calibrate it.

If you use your own DJI Remote Controller, you need to update beta-flight to 10.6.0 to set up and bind your DJI remote controller.

ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC):

• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires
• Designed to support DJI Digital FPV.

BNF // Parts lists

• 1x TITAN DC5 HD Frame
• 2x TPU camera side plate soft mount
• 1x iFlight Lipo Strap
• 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
• 4x XING 2207 Motor Unibell (4S 2450KV)
• 1x SucceX- F7 Flight Controller
• 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S

The iFlight DC5 was designed for the DJI Digital FPV System. It is also suited for a 5-inch propeller power system and flight controllers. The DC5 HD Frame design makes installation and maintenance easy. With the 5-inch propeller power system, users have ensured a super great flying experience. Soft TPU material helps to protect the camera and antenna in the event of a crash.

Features：

• Full 3K Carbon Fiber airframe
• Easy arm swaps
• 230mm wheelbase，137g
• Popular Deadcat style configuration, No prop in View
• Fits both 30.5x and 20x stacks
• Specifications:
• Type: 5" FPV Freestyle frame
• Frame wheelbase: 230mm
• Frame weight:137g approx
• Standoff: M3*25mm(4pcs), M3*32mm(4pcs）
• 5mm thickness, 11.3mm width arms,1.5mm vertical side plates
• 2mm top, the upper & bottom plate
• Mounting Holes: 30.5*30.5mm/20*20mm
• Support camera size: 19*19mm 22*22mm
• Recommended motors: 22xx, 23xx

Package included:

• 1 x DC5 HD Frame
• 1 x Screw Bag
• 1 x TPU Camera mount adapters
• 1 x TPU DJI Air Unit Bracket Mount
• 1 x TPU DJI Air Unit Antenna Mount
• 1 x Battery Anti-slip Mat
• 2 x Battery Straps

DJI PARTS NOT included

The mark 4 freestyle frame is a lightweight frame with loads of room to make installation of your electronics super easy.

6 inch configuration
Super lightweight Freestyle frame.
Beautiful appearance design , durable in crashing.
Quick maintenance Arms and replacement of equipment.
25mm standoffs for better height and CG relation,Ample space for electronic installation.
Alu6061 Standoff New , Strengthen the hardness.
There are 30.5*30.5 and 20*20 flight control holes , Stack can fit in the center or the rear.
High quality 3K twill carbon fiber plate, high precision CNC processing.
YFS screw, 12.9 grade strength, non-slip teeth, anti-rust,Durable steel hardware.

IF chosen as Combo, you will be delivered the following

• Frame kit

Combo will include :

• 4 Motors  2206
• Frame kit
  
• 4 esc 35 amps
• power distribution board
• Lipo 4s 1300-1800
• Flight controller spacers
• propellers

H150 RC Helicopter Parts MIni 150mm 4-Axis Carbon Fiber Frame kit fpv RACER

• Specification:
• Upper board: 1.5mm
• Height: 30mm
• Material: carbon fiber
• Wheelbase : 150mm
• Flight controller install hole distance : 30x30mm
• Motor mount bolt holes: 8/12mm
• Support 3 inch propeller (Max.)
• Recommend motor: 1104, 1306

This is the HD version of the ImpulseRC Apex frame and is designed to fit the DJI Digital FPV System.

The Apex shatters the glass ceiling in freestyle frame design.

Through a process of continous refinement and always striving to improve we have created a new breed of freestyle frame. The Apex does not compromise in stiffness or durability, so you never have to choose between confidence and performance.

Unique design elements new to the FPV world make your build and maintenance more simple than ever before. Toughness of the frame itself is increased while also offering much better protection for your investment in flight electronics.

APEX ARM DESIGN
The arms of an FPV frame are the key structural component which translate the thrust from the motors to the majority of the mass in the aircraft, which is secured to the body of the frame. The design of the arms and how they are attached to the body is one of the most vital aspects that influences the performance of an FPV frame.

There are multiple problems which can occur with existing arm designs which can lead to poor performance, difficulty tuning and added cost. The Apex addresses all of these problems with a simple and unique new design that eliminates all arm slop and drastically increases durability.

PERFECTLY SYMMETRICAL
Symmetrical arms make it possible to pocket one side of the part without introducing the need for distinct left and right arms, making you require more spare parts. We use a pocket instead of a hole under the motor to increase durability and we embed a press nut to simplify attachment and avoid clearance issues under your stack.

SIMPLE MAINTENANCE
Flight electronics are mounted to the upper main plate using countersink bolts. This completely decouples the arm attachment from the electronics mounting. Arms can be replaced using two bolts without any disturbance to your stack.

SHOULDER BOLTS AND THREADLOCKER
Our custom machined shoulder bolts act as a solid steel pin through the arm which eliminates slop and tolerance issues. The precision shaft passing through the arm removes all side-loading of the carbon laminations on to the chisel-like threads of a regular bolt. Factory added threadlocker and custom aluminium cone washers spread the load of the clamping force and ensure the bolts will not vibrate loose.

KEY TO THE APEX
At the apex of a masonry arch a keystone locks all the stones in to position and allows the arch to bear weight and be self supporting. A keystone is a hallmark of strength and good design, the Apex FPV frame is no different and the carbon key sits at the heart of the frame to distribute forces applied to the arms.
IF chosen as Combo, you will be delivered the following

Frame kit

• Fc: Kakute F7 DJI compatible
• Motors: 2206 3-4 S Compatible
• ESC 35a
• PRops 6"
• Lipo: 4S 1300-1800 65c

KINGKONG/LDARC TINY7 75mm Micro FPV Quadcopter With 720 Brushed Motors Baced on F3 Brush Flight Controller

Description:

• Brand:KINGKONG
• Item NO:TINY7
• Battery Power:3.7V  450mAh 80C (NOT INCLUDED)
• Wheelbase:75mm
• Propeller size:40mm
• (FC): Micro F3(Betaflight): click here
• VTX: 25mW/16CH
• Camera:800TVL/150°
• Frame:ABS high-quality
• Motor:720 Brushed
• Charger:200mah/500mah
• Basic version:Switchable 1s One -way Charger USB Powered
• Advanced vesion:Switchable 1s Five -way Charger USB or 2~6s  Lipo Powered
• Weight: 31.3g (without Receiver and Battery)

Receiver:

• FM800 (Futaba Fasst)

 Note :the Battery upgrade power is 3.7V 450mAh 80C
 
Package included:

Basic version:

• 1x 75mm Frame
• 2x 40mm Propellers
• 1x Cover
• 1x FC+VTX+Brushed+ESC+AIO PCB
• 1x 800TVL 150° camera
• 1x 1s One -way Charger USB Powered
• 4x 720 Brushed motors

KINGKONG/LDARC TINY7 75mm Micro FPV Quadcopter With 720 Brushed Motors Baced on F3 Brush Flight Controller

Description:

• Brand:KINGKONG
• Item NO:TINY7
• Battery Power:3.7V  450mAh 80C (NOT INCLUDED)
• Wheelbase:75mm
• Propeller size:40mm
• (FC): Micro F3(Betaflight): click here
• VTX: 25mW/16CH
• Camera:800TVL/150°
• Frame:ABS high-quality
• Motor:720 Brushed
• Charger:200mah/500mah
• Basic version:Switchable 1s One -way Charger USB Powered
• Advanced vesion:Switchable 1s Five -way Charger USB or 2~6s  Lipo Powered
• Weight: 31.3g (without Receiver and Battery)

Receiver:

• No receiver included

 Note :the Battery upgrade power is 3.7V 450mAh 80C
 
Package included:

Basic version:

• 1x 75mm Frame
• 4x 40mm Propellers
• 1x Cover
• 1x FC+VTX+Brushed+ESC+AIO PCB
• 1x 800TVL 150° camera
• 1x 1s One -way Charger USB Powered
• 4x 720 Brushed motors

KINGKONG/LDARC TINY6 Advanced 65mm Micro FPV Quadcopterr With 615 Brushed Motors Based on F3 Brush Flight Controller

Description:

• Brand:KINGKONG
• Item:TINY6
• Battery Power:3.7V 250mAh 30C (NOT INCLUDED)
• Wheelbase:65mm
• Propeller size:31mm
• (FC): Micro F3 (Betaflight)
• VTX:25mW/16CH
• Camera:800TVL/150°
• Frame:ABS high-quality
• Motor:615 Brushed
• Charger:200mah/500mah
• Basic version:Switchable 1s One -way Charger USB Powered
• Advanced vesion:Switchable 1s Five -way Charger USB or 2~6s  Lipo Powered
• Weight: 19.2g (without Receiver and Battery)

Receiver:

• No receiver
  

 
Package included:

 Advanced vesion:

• 1x 65mm Frame
• 16x 31mm Propellers(4* red, 4 *white, 4*pink ,4*yellow)
• 4x Cover(1*red, 1*white, 1*pink ,1*yellow)
• 1x FC+VTX+Brushed+ESC+AIO PCB
• 1x 800TVL 150° camera
• 1x 1s Five -way Charger USB or 2~6s  Lipo Powered
• 4x 615 Brushed motor
• 1x spanner

A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

• Wheel base: 100mm
• Weight: 55g ( Without RX battery )
• Flight controller: NAZE32 Brush
• Motor: 8520 Brushed Motor
• Propeller Size : 65mm
• Camera : 600TVL HD CMOS 1/4 inch Camera
• VTX: 5.8G 25mw 16ch
• Battery : 3.7v 550mAh 25C Lipo battery
• Flight time : 5-7 minutes
• RX Type : Not included

A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

• Wheel base: 100mm
• Weight: 55g ( Without RX battery )
• Flight controller: NAZE32 Brush
• Motor: 8520 Brushed Motor
• Propeller Size : 65mm
• Camera : 600TVL HD CMOS 1/4 inch Camera
• VTX: 5.8G 25mw 16ch
• Battery : 3.7v 550mAh 25C Lipo battery
• Flight time : 5-7 minutes
• RX Type : Not included

KingKong 110GT 117mm Brushless Mini FPV Racing Drone Yellow & White

KINGKONG/LDARC 110GT KIT 117mm Carbon Fiber Frame Kit with 4 Pairs 2840 Props 2.8inch Propeller Guard

Features:

• Micro F3 6DOF flight controller with 32-bit STM32F303CC processor and MPU6050
• Furious flying speed 1105 8500KV brushless motors, high PRM
• Powered by 350mAh 2S 7.4V 25C lithium-ion battery (NOT INCLUDED-
• 800TVL HD FPV camera, 150-degree FOV, 5.8G 16CH 25mW video transmitter
• 117mm wheelbase, as big as your palm; Approx 63.7g, extremely light

Specification:

• Brand Name: KingKong
• Item Name: Kingkong 110GT 117mm Mini FPV Racing Drone
• Model: 110GT
• Version: PNP, no rx
  
• Wheelbase: 117 mm
• Dimension: 166*126.4*60.8 mm
• Weight: Approx 63.7g (without battery)
• Battery: 7.4V (2 Cells) 350mAh 35C

Package Included:

ARF Version

• 1 x KingKong 110GT Drone
• 1 x Spare Fuselage (Canopy)
• 1 x Propeller Guard
• 4 x Pair 2840 Prop
• 1 x USB Cable
• No Receiver

KingKong 95GT 95mm Micro FPV Racing Drone Yellow & White canopies

5.8G 800TVL CMOS / Micro F3 Flight Controller / 4-in-1 BLHeli - S 10A DShot ESC

• KingKong 95GT 95mm mini FPV racing drone uses the more powerful 1103 7800KV brushless motors, the superior 4-in-1 BLHeli - S 10A DShot ESC, and the 35C high discharge rate LiPo battery.
• KingKong 95GT allows you to fly swiftly and steadily both indoors and outdoors; enjoy the fascinating panoramic view with the 800TVL HD CMOS camera.
• Put the impact-resistant canopy backward, and you will be able to update / maintain the components inside.

Main Features:

• Micro F3 6DOF flight controller with 32-bit STM32F303 MCU and MPU6050
• 4-in-1 BLHeli - S 10A ESC supports the latest DShot digital signals etc.
• Furious flying speed - 1103 7800KV high PRM brushless motors and 35C LiPo
• 800TVL HD FPV camera, 150-degree FOV, 5.8G 16CH 25mW video transmitter

Specifications:

• Wheelbase: 95mm
• Weight: 50.2g ( not including battery )
• Material: carbon fiber chassis + ABS canopy
• Chassis thickness: 2mm
• Brushless motor: 1103 7800KV
• ESC: 4-in-1 BLHeli - S 10A
• Flight controller: micro F3 6DOF
• Propeller: 1935 three-blade
• Camera: 800TVL CMOS
• Field of view: 150 degree
• Battery: 7.4V 350mAh 35C LiPo ( NOT INCLUDED )

No receiver included 

Kingkong FLY EGG 100 Racing Drone Spare Parts

Specification:

• Brand name: Kingkong
• Item name: FLY EGG 100
• Material: carbon fiber
• Weight: 8.5g
• Usage: for Kingkong FLY EGG 100  racing drone

Package included:

• 1 x FLY EGG 130 / 100 bottom plate
• 1 x camera fixing plate
• 1 x LED
• 1 x cable

A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

Package included:
1 x Q100 Frame kit
1 x N32 Brush Flight controller
1 x 600TVL Camera
4 x 8520 Coreless Motor
20 x Blade

Specification:
Brand Name: Kingkong
Item NO.: Q100
Wheelbase: 100mm
Weight: 41.8g (Without RX and battery)
Size: 85*85*25mm
Color: Yellow
Flight controller: N32 Brush
Firmware version: Cleanflight 1.13.0 ALIENFLIGHTF1
Motor: 8520 Brush Motor
Prop Size: 65mm
Camera: 600TVL HD CMOS 1/4 inch Camera
AV Wireless Transmitter: 5.8g 25mw 16ch
Batterry: 3.7V 550mAh 25C Lipo battery
Flight time: 5-7 minutes

A perfect micro fpv quadcopter for indoor racing. Have great flight time with some good punch as well. This thing is fast as it have 8250 motors.

Package included:
1 x Q100 Frame kit
1 x N32 Brush Flight controller
1 x 600TVL Camera
4 x 8520 Coreless Motor
20 x Blade

Brand Name: Kingkong

Item NO.: Q100
Wheelbase: 100mm
Weight: 41.8g (Without RX and battery)
Size: 85*85*25mm
Color: Yellow
Flight controller: N32 Brush
Firmware version: Cleanflight 1.13.0 ALIENFLIGHTF1
Motor: 8520 Brush Motor
Prop Size: 65mm
Camera: 600TVL HD CMOS 1/4 inch Camera
AV Wireless Transmitter: 5.8g 25mw 16ch
Batterry: 3.7V 550mAh 25C Lipo battery
Flight time: 5-7 minutes

Kingkong Smart 90mm Assembled Micro FPV Racing Quad (No RX)

The Kingkong Smart 90mm Full Carbon Fiber PNP Frame Kit with Naze32 8520 25mW FPV AIO CAM TX 3.7V 550mAh has a lot of amazing features that FPV pilots and aerial photographers would love.
It features a Naze32 Brush flight control flashed with Cleanflight 1.13.0 ALIENFLIGHTF1. The FPV camera captures crisp, clear flight footages while 5.8G 25mW 16CH AV transmitter shares the images to the ground in real time.
8520 brush motor provides constant high power to drive the propellers to ensure a stable flight every time.
Built-in 550mAh battery provides up to 7 minutes of long flight.
What's more, it has a tough yet light full carbon fiber construction to resist shock and impact.

Features:

• Naze32 Brush flight control flashed with Cleanflight 1.13.0 ALIENFLIGHTF1
• FPV camera captures crisp, clear flight footages
• 5.8G 25mW 16CH AV transmitter shares the images to the ground in real time
• 8520 brush motor provides constant high power to ensure a stable flight every time
• Built-in 550mAh battery provides up to 7 minutes of long flight
• Full carbon fiber construction to resist shock and impact while maintaining lightweight
• Receiver not included

Specifications:

• Brand: Kingkong
• Model: Smart 90
• Wheelbase: 90mm
• Flight Controller: Naze32 Brush
• Firmware Version: Cleanflight 1.13.0 ALIENFLIGHTF1
• Motor: 8520 Brush Motor
• Prop Size: 56mm
• Receiver: No
• Camera: 600TVL 150° HD CMOS 1/4 inch Camera
• AV Wireless Transmitter: 5.8G 25mW 16CH
• Battery: 3.7V 550mAh 25C Lipo Battery
• Flight Time: 5-7 minutes
• Material: Carbon Fiber
• Dimensions: (8.5 x 8.5 x 2.5)cm (L x W x H)
• Weight: 41g

Package Includes:

• 1 x Smart 90 Carbon Fiber Frame Kit
• 1 x N32 Brush Flight Controller
• 1 x 600TVL Camera
• 4 x 8520 Coreless Motors
• 24 x Blades
• 1 x 3.7V 550mAh Lipo Battery
• 1 x Prop protection

- Special X frame design with equidistant motor placement and centered mass for more agility and responsiveness.
- A custom PDB with dual shielded voltage regulators, integrated XT60 battery connector, low voltage buzzer and programmable LED strip.
- The built-in PDB serves as the top half of the main structural frame, eliminating the need for another carbon piece to save precious weight.
- With all the components arranged towards the center, its center of gravity allows the X frame to turn in an instant.

Specifications:

Model: Nighthawk - X4
Wheelbase: 175mm
Arm Thickness: 4mm
Bottom Plate: 1.5mm
Top Plate: 1.5mm
Weight: 123g

This is the Mini Evo - a 155mm Carbon 3k Matt frame, allow you to put 4inch prop with 1306 motors

Biggest advantage of this frame is that all electronics are protected.

Key features:

•     Made from Carbon 3K Matt 1.5mm thick
•     Inox and Nylon spacer
•     Only 55g frame
•     Approx build weight (without too much saving) under 280g
•     Battery on top 3s 1000mah
•     Tiltable FPV Cameras
•     Designed for 1306 motors

Delivered as Frame Kit and optional Combos:

- Combo electronics- 4x Motors 1306, 4X ESC 12a, 4x4" Props, CC3D Atom or KK2.5 mini controller

- Combo FPV= Electronics above with Video TX, 700 tvl Camera, Spyro antenna

- Combo RTF= AS above with Radiolink AT9, R9 receiver, Lipo battery 3s

RAMMUS 180 FPV Racer Advanced Electronics Combo F3 controller

Including all electronics combo, see options.

Included in the package

• RAMMUS 180 kit    
• 6x Canopy（6 different colors )
• 4*4.5X3 props
• 2205-2300KVCW  *2   
• 2205-2300KVCCW  *2
• F3 PLUS flight controller *1   
• Little Bee 20A ESC *4
• Mushroom antenna
• 5 v&12v PDB  *1
• Sony 700 tvl Cam  *1
• 40ch VTX

Need to complete

Lipo, Radio

RAMMUS 180 FPV Racer Advanced Electronics Combo F3 controller

Included in the package

• RAMMUS 180 kit    
• 6x Canopy（6 different colors )
• 4*4.5X3 props

Need to complete

Lipo, Radio, electronics

RAMMUS 200 FPV Racer Advanced Electronics Combo F3 controller

Including all electronics combo, see options.

Included in the package

• RAMMUS 200 kit    
• 6x Canopy（6 different colors )
• 4*4.5X3 props
• 2205-2300KVCW  *2   
• 2205-2300KVCCW  *2
• F3 PLUS flight controller *1   
• Little Bee 20A ESC *4
• Mushroom antenna
• 5 v&12v PDB  *1
• Sony 700 tvl Cam  *1
• 40ch VTX

Need to complete

Lipo, Radio

RAMMUS 200 FPV Racer Advanced Electronics Combo F3 controller

Kit version only

Included in the package

• RAMMUS 200 kit    
• 6x Canopy（6 different colors )
• 4*4.5X3 props

Need to complete

Lipo, Radio, electronics

The Krieger is the quadcopter distilled down to its roots, a simple X quad made for FPV. This DTF200 model spins 5" props while the DTF225 spins 5" or 6" props. Both sport 4mm arms. FPV cam tilt angle is adjustable without tools. With much of its mass closer to its CG, the Krieger is quick and nimble. And with its minimal frontal area, the Krieger has far less drag than a typical 5" H quad, resulting in much higher speeds.

Includes
1x Top X Plate
1x Bottom X Plate
1x FPV Cam Plate
2x Vertical Stanchions
1x 4mm Carbon Spacer
4x 5" Arms Hardware

The Shendrones Mixuko is a 196mm drone for 5" props that is almost impossible to destroy! It has a massive 4mm thick carbon fiber mono plate design that ensures it can take a tumble because that's what FPV flying demands.  And what is the Mixuko? Well it's a pure racing quad, designed specifically to NOT carry an expensive HD cam. This is about racing not about recording scenery right?  and this is certainly no camera ship!

FPV cam angle is adjustable without tools using a friction fit system. With the supplied 30mm standoffs it's a moderately challenging build but an advanced builder can knock off another 5mm from the stack height and put it together in pretty short order.

If you are looking for a quality mini FPV quad racing frame then the Shendrones Mixuko is a smart choice.

Specs:
Name: Mixuko
Wheelbase: 195mm
Weight: 94g
Chassis: 4mm (single billet mono plate)
Fuselage frame: 2mm

Includes:
Carbon Fiber parts
Alloy standoffs
Hardware

Sky-Hero OB1 Nacked frame 4" (Dia.175mm)

OB1 features:

Lighter
Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

Faster

The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

Stronger
The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

Others:

• The 15°>70° adjustable camera angle caters for different pilot profiles.
• The flexible ESC location (over or under arms) providing a tuned frame for every FPV

Racer's needs:

• Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
• Motor 2204-2600 to 2700 kv
• ESC 20A (Littlebee or similar)
• Props 3 blades 4x4.5x3
• Lipo 3 to 4S 1300mAh
• CC3D Atom
• PDB: MPDB5V12V or PDB-LDO

What's included?

• Cables protection Club Racer (4pc)
• Main frame set OB1
• Side frame OB1
• Front Arm OB1
• Rear Arm OB1
• Aluminium Spacers
• Screw Set OB1

Note that the canopy is not included!

Racing on a mini track or indoors with this small but high powered mini-drone will set your mini FPV world on fire. Brushed motor frame with PDB at 95mm this mini drone is an awesome package. 

The EVO has more with a Battery voltage detection buzzer interface for voltage alarm, supports CleanFlight and betaflight software, designed to easily add your own, motors, a camera for FPV, receiver and customize the mini quad with your own personal style.

Features:
• Brushed motor frame with power distribution board
• F3 flight controller 
• Supports most mainstream receivers
• Battery voltage detection
• Supports Cleanflight and Betaflight software
• Designed to easily add your motors, flight controller and receiver
• Perfect for mini FPV and mini-drone racing
• 4 LED lights for orientation 

Specs:

• Wheelbase: 95mm
• Weight: 8.5g
• Video output format: PAL / NTSC
• Flight controller: SP racing F3 EVO

Requires:

FPV camera w/ VTX
1S 600mAH LiPoly battery
4 x 7520-8520 Brush Motor- combo inclusive

Radio

Includes:
1 x F3 EVO brush PDB frame kit
1 x Accessories package

Pefectly guide 1-2S lipo, it can even convey you an exceptionally violent flying adventure with a 2S lipo battery.
Integrated with four latest NMOSFET, each can reach as a minimum 10A and every motor has free-wheeling diode.
Comes with the battery voltage detector and the buzzer interface. Customers can set the voltage alarm randomly.
Uses STM32 F303CCT6 because the leading controller and MPU6500 of InvenSense Gyro.
Support SPEKTRUM (DSM2/X), PPM, SBUS and different mainstream receiver, no want to join the exterior inverter which has been pre constructed-in.
Support Cleanflight and Betaflight utility.
This can be additionally used as a body.
With four LED gentle, has LED strip feature.

Delivered as frame only or compleet with motors (RJX1338) and 55mm propellers.

Tilting  Motors Racer 180 FPV Drone F3 6DOF Flight Controller VTX 1000TVL CCD Camera PNP

This is the PNP (Plug and Play) version that comes without battery, charger, receiver or remote control.

• Size: 153mm x 190mm
• Weight: 420g (without battery)
• Flight controller: F3 6DOF
• Camera: 1000TVL CCD
• Propeller: 4 inch 3 blade
• Brushless motor: 2205 2350KV
• ESC: 20A BLHeli
• Transmitter: 350mW 5.8G 40CH
• Receiver: integrated 6 channel (not included)
• Remote control: 2.4G 6 channel (not included)
• Battery: 3-4S (not included)
• Flight time: 8-9 minutes

 
Features:

• Stable picture, stable structure.
• CNC aluminum carbon fiber body connection, easy to replace parts.
• Standard F3 6DOF flight controller, more stable flight.
• 2205 2350KV brushless motor, tilt-Rotor design, dynamic rotor tilting.
• 20A ESC, support oneshot125 and damped light
• support 3S-4S battery.
• 5.8G 40CH image system
• Built in low voltage alarm.
• 1000TVL CCD camera, NTSC / PAL switchable, support night flight
• Comes with pasters to DIY the surface of your racer 180 as you like

Package included:

• 1 x Eachine Racer 180 FPV Drone
• 1 x F3 6DOF flight controller
• 4 x 20A BLHeli ESC
• 2 x CW 2205 2350KV motor
• 2 x CCW 2205 2350KV motor
• 4 x 4 inch 3 blade CW propeller blue
• 4 x 4 inch 3 blade CCW propeller blue
• 2 x canopy (blue *1, white*1)
• 1 x mushroom antenna
• 1 x 1000TVL CCD camera
• 1 x 5.8G 40CH transmitter
• 1 x battery strap
• 1 x DIY paster set
• 2 x magic tape
• 1 x propeller wrench
• 1 x Instruction

The TITAN DC5 HD frame perfectly match the amazing new DJI FPV system, this quad makes flying FPV really breathtaking.

Electronics optional

Characteristics:

•  Popular Deadcat style configuration, n
•  Optimized weight distribution: DJI unit and stack centered
•  Suitable for both 30.5x and 20x stacks
•  Full 3K carbon fiber airframe with beveled arm
•  222mm wheelbase, weight: 116g dry weight without TPU parts

Specifications:

• Weight: 132.3 (with TPU parts and nonslip battery pads)
• Wheelbase: 222mm
•  Main body size: 185 * 133mm
•  Distance from bottom to top: 35 mm
•  Arm thickness: 6 mm
•  Bottom plate thickness: 3 mm
•  Top plate thickness: 2.5 mm
•  Camera plate thickness: 1.5mm (2.5mm including TPU inserts)
•  Mounting holes: 30.5 * 30.5mm
•  Camera Size Support: 19 * 19mm 22 * ​​22mm
•  Recommended engines: 22xx, 23xx

Package included:

• 1 x TITAN DC5 HD frame
• 1 x Screw bag
• 1 x TPU camera mount adapters
• 4 x Arm Guard / Motor Mount
• 1 x TPU DJI bracket mount for air unit
• 1 x TPU DJI Antenna Holder for Air Unit
• 1 x TPU protection plate front bottom plate
• 1 x TPU bottom plate rear protective mount
• 1 x Battery antislip mat
• 2 x battery straps

Eachine E50 WIFI FPV With Foldable Arm Altitude Hold RC Selfie Drone Quadcopter RTF

With foldable arm, small size, easy to carry
Innovative selfie drone,720P camera allows you to get great selfies effortlessly.
Wifi real-time transmission FPV system which can capture photos and record videos for your great memory.
Built-in barometer with altitude hold function provides stable flight.
Mobile phone WiFi control, FPV by mobile phone screen.
The G-sensor mode enables the small quadcopter to automatically follow the way you move your smartphone.
With attractive headless model, completely solving pilot loss-of-orientation problem. .
One press automatic return ensure that you can call back your quadcopter without any delay.
4 Channel which can do ascend, descend, forward, backward, left sideward fly, right sideward fly and rolling 360°  
It has 6-axis gyro which can have more stable flying and be easy to control
3D flips with amazing agility provides a stunt aerial show.                 
Light weight airframe with nice durability

Description:

• Brand name: Eachine
• Item name: Eachine E50 RC Quadcopter
• Frequency: 2.4G    
• Channel: 4ch
• Gyro: 6 axis
• Motor Type: Brushed Motor

Function:

• 3D rollover,Camera,Forward/backward,FPV,Gravity Sense Control,Headless Mode,One Key Automatic Return,One Key Taking Off,Sideward flight,Turn left/right,Up/down,
• WiFi Connection,With light

Package Included:

• 1 x Eachine E50 RC Quadcopter
• 1 x 3.7V 500MAH battery
• 1 x USB charger
• 4 x Propeller

Specification:

• Product battery: 3.7V 500mAh 20c(Included)
• Charging time: 120mins
• Flying time: 8-15mins
• R/C distance: about 40m             
• Color: White
• Video Resolution: 720P
• Material: Electronic Components,Plastic
• Product weight: 0.073 kg
• Package weight: 0.241 kg
• Product size: 13.5*6.5*2.5cm (the arms are folded)
• 13.5*16*2.5cm (the arms not folded)
• Package size: 15.5*8.6*6cm

Hermit 145 V2 Micro brushless FPV quadcopter (158mm) is a smal size FPV model with built in controller, esc, vtx, OSD, camera

Hermit 145 V2 is a newly designed micro FPV quadcopter of only 158mm (Diagonal from motor center to motor center), its small size can make it fly in a relatively confined space easily. It is installed a 5.8G analog video transmitter (VTX) supporting 40 channels, an analog camera(120°), a flight control board supporting CleanFlight and BaseFlight firmware), a buzzer, three onboard full color LED tail lights, a compatible receiver (three options), a DCDC power, a integrated control board with OSD etc. In addition, its camera is orientation adjustable.

Features:

• Weight: 84.0g (not including battery)
• Flight weight: 112.0g (450mAh/25C/7.4V); 128g (850mAh/25C/7.4V)
• Flight time：9 minutes (450mAh/25C/7.4V); 12 minutes(850mAh/25C/7.4V)
• Working voltage: 7V~8.4V (2S)
• Diagonal from motor center to motor center: 158mm
• Propeller diameter:90mm
• ESC: MU-3A-L1(max working votage:8.4V)
• STM32F103CBU6 main control/72MHz
• Support an outside compass, sonar and GPS
• Camera angle adjustable:+/- 25°
• It uses brushless micro motors of high efficiency ( 5.6g, 4000KV)
• There are 2 options for the integrated receivers：compatible DSMX/DSM2 receiver or compatible FUTABA SFHSS receiver.

Note: Please make a choice on the receiver for your FC when you place the order!

Other features:

• The battery can be changed and mounted by only one hand
• Binding operation can be done by one hand too.
• Functions for hardware
• The integrated analog 5.8G/300mw video transmitter supports up to 40 channels (frequencies)
• Supports ONESHORT125 high speed ESC mode
• Supports changing ESC parameters or upgrading ESC firmware through flight control board
• Supports setting up OSD parameters and upgrading OSD firmware;
• Customer can add or change many kinds of compatible receiver according to their request.

 Package Includes:

• 1 x Quadcopter
• 4 x Blades (CW two pcs, CCW two pcs)

The H502S is Hubsans latest FPV X4 Quadcopter and features a built-in 720P HD camera, return to home mode, built in GPS, altitude adjust, headless flight mode, GPS hold and follow me mode to make the quad even easier to fly.

The built-in GPS enables the quadcopter to enter into failsafe mode if the connection to the radio transmitter is lost, or even be called back at the push of a button. The GPS is also used to follow the transmitter in follow me mode and to hold a set position.
The multi-function transmitter features all the usual commands from the touch of a button with conveniently placed buttons for GPS, RTH and camera/video functions making this quad a pleasure to fly.

What sets the H502S apart from its rivals is its impressive array of features. The 720P HD camera allows for some stunning aerial photography and videos coupled with the altitude height mode it can give flight times up to 10 minuets or more.

Hubsan H502S Features:

• 720P HD camera
• Headless flight mode
• Altitude height mode
• GPS follow me mode
• GPS hold
• LED lights
• 6-Axis gyroscope
• Can fly forward/backward, left/right/left side/right side, up/down
• Charging time: about 65 minutes
• Headless Mode

The Hubsan H502S features a Headless flight mode which makes flying easy and makes the H501S even easier to fly for beginners and more experienced pilots. (This is activated by pressing the Throttle/Rudder stick down for 0.5second in mode two, or the Elevator/Rudder stick down for 0.5second in mode one. The headless mode will be indicated on the handset and "beeps")

Follow Me Mode

The Hubsan H502S features a GPS follow me mode. When enabled the H502S will follow the transmitter using the built-in GPS system allowing you to record your own action.

HD Camera

The Hubsan H502S features a 720P HD Camera, which can record stunning aerial high-definition flight videos and pictures. When coupled with the follow me mode you can record some stunning videos from above.

GPS Return To Home and Failsafe

The Hubsan H502S features built-in GPS which enables the quadcopter to enter into a failsafe mode if the connection to the radio transmitter is lost. In failsafe mode, the flight control system will automatically control the quadcopter and bring it back to the Return To Home point and land. The Return To Home function can also be enabled directly from the transmitter, this will automatically bring the quadcopter to the Home point and land safely.

Specs

• Channel: 4ch, 2.4GHz
• 5.8GHz FPV camera
• Remote Control Distance: 200+ Meters
• Battery For Transmitter: 4 x AA Battery (Not Included)
• Gyro: 6 Axis
• Battery for H502S: 7.4V 15C 610mAh LiPo
• Flight Time: 8-10 mins
• Width: 165mm
• Height: 60 mm
• Length:165 mm

What's Included In The Box :

• 1 x Hubsan H502S Quadcopter
• 1 x Transmitter Handset
• 1 x USB LiPo Balance Charger
• 8 x Propeller
• 1 x Propeller Removal Tool
• 1 x LiPo Battery
• 1 x Instructions

Please note you will need 4 x AA Batteries for the transmitter.

Sky-Hero OB1 COMBO 4" (Dia.175mm)

OB1 features:

Lighter
Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

Faster

The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

Stronger
The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

Others:

• The 15°>70° adjustable camera angle caters for different pilot profiles.
• The flexible ESC location (over or under arms) providing a tuned frame for every FPV

Racer's needs:

• Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
• Lipo 3 to 4S 1300mAh
• Camera 600TVL
• VTX 25mw

What's included?

• Cables protection Club Racer (4pc)
• Main frame set OB1
• Side frame OB1
• Front Arm OB1
• Rear Arm OB1
• Aluminium Spacers
• Screw Set OB1
• XNova Motor 2204-2600Kv x 4
• OneShot125 20A x 4
• Bullnose Props 3 blades 4x4.5x3
• CC3D Atom
• PDB: MPDB5V12V

Note that the canopy is not included!