TX & RX Accessories

Radio Transmitter Right Angle Locking Toggle Switch,  6 PIN, DPDT

• Super quality right angle panel mount locking toggle switch.
• Contacts are DPDT rated 5 Amp at 120VAC.
• Brand new! Comes with one panel mounting nut.

Radio Transmitter Toggle Position Switch Long version, replacement for major Brands like Futaba, JR, Multiplex, Hitec, Taranis, and others.
This is a LONG toggle switch ,different options

• Long Switch 2 positions
• Long Switch 3 positions
• Long switch ( Spring), used as Trainer switch.

Remark :in some radios Soldering is required to swap out this switch.

Radio Transmitter Toggle Position Switch Short version, replacement for major Brands like Futaba, JR, Multiplex, Hitec, Taranis, and others.
This is a SHORT toggle switch ,different options

• Long Switch 2 positions
• Long Switch 3 positions

Remark :in some radios Soldering is required to swap out this switch.

This is a kit of CNC parts to let you customize your TX16S to give it a unique look and premium feel. on top you get the real leather grips which is a nice upgrade to have.

An optional CNC, anodized metal parts set to upgrade your RADIOMASTER TX16S transmitter. Includes a folding carry handle, gimbal fascia's, roller wheel, stick knobs, rotary knobs, screws, washers, and much much more. Make your transmitter stand out from the crowd with one of these upgrade sets.

Description:

Brand Name: RadioMaster

Item Name: Upgrade Set

Material: CNC Metal+ grips made from Leather

Color: Silver/Red/Blue/Purple+ leather grips

Compatible: for TX16S Transmitter

1 Pair Brown Original RadioMaster Leather Side Grips Replacement Parts for TX16S Transmitter

1 Pair COW Original RadioMaster Leather Side Grips Replacement Parts for TX16S Transmitter

RECEIVER Antenna 2.4ghz (2pcs) 210mm long for Futaba, Jr, Graupner

Length of 210mm for receivers FUTABA , jr, Graupner, and others using Ipex4 connector.
Also fits other brand receivers. Increasing reception.

Allows the receiver antenna to be deployed outside the fuselage in models with all-carbon canopies or fuselages
The Antenna can be replaced by any experienced user.

Set of 2 antennas

Receiver battery connector cable Graupner 30cm

Specifications:

• Thickess  0,5 mm²
• Lenght 300 mm,
• lose BLUE-LINE-SILIKON - Made in Germany -

Receiver Antenna 2.4Ghz 15 cm Ipex 1

Check your connector to insure its Ipex1 Type of connectors

Color can vary between Black and Gray

Receiver Antenna 2.4Ghz 15 cm Ipex 4

Check your connector to insure its Ipex4 Type of connectors

Color can vary between Black and Gray

Set of 1 antenna

We stock many crystals , please choose from the options which do you need If you cant find what you need, please insert the requested item in the order comments

Currently in Stock all 35, and 40 mhz crystals. Some of 72 .

Crystals are Full size, and support all kind of Radios in FM range. Dual conversion crystals are not the same, choose JR or Futaba

This Set of Anodized Aluminum Transmitter Stick Ends from Secraft come in dual color. Customize your JR/Spektrum or Futaba/Hitec transmitter to your style. The V4 gimbal is designed for pilots with big fingers, looking for more area to hold. The knurled grip is 40mm long with 10mm diameter, allowing for more area to hold. Needs no height adjustment as the gimbal fits on the entire stick length and still stays high up.

Features:

• CNC machined from Aluminum 6061-T6 (anodized)
• Designed for pilots with big fingers, more area to hold
• Available in Dual color, Silver/Red and Silver/Blue
• Long length with 10mm dia gimbal

Included with the package:

• CNC Transmitter 3mm Gimbal Stick Ends V4 - Blue (Htc, Fut, Spm) x 2

Specifications:

• Material: Duralumin
• Length: 40mm
• Diameter: 10mm
• Color: Silver/Blue
• Gimbal I.D: M3
• Fits Transmitters: Hitec, Futaba, Specktrum DX8

Sensor connection wire 150mm, VBar Control

Sensor connection wire 250mm, works with Mikado VBar Control radio

Sensor connection wire 350mm, VBar Control

Sensor connection wire 500mm, works with Mikado VBar Control radio

Don't have the battery slip out while flying out of the switch or just lock in the servo extensions securely
Clip for servo connector or extension lead joint, to prevent the connection breaking under outside force.

10pcs in set

colors:

• Blue
• Purple
• Yellow
• Green
• Black

SPARTAN Replacement gyro pads for gyros .
The pack includes (5x) "3M" 30x30x2mm, (1X) Metal plate

12-Inch 300mm Remote Receiver Extension for spektrum.

6-Inch 150mm Remote Receiver Extension for spektrum.

Sticks (short version) for VBar Control

Sticks black anodized for VBar Control Radio

Switch caps for JETI Transmitters - BLACK (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - BLUE (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - GREEN (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - RAINBOW (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - RED (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - WHITE (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Switch caps for JETI Transmitters - YELLOW (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V2 version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:
Switch Cap (Fringe Bottom) *8pcs
 

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V2 version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:
Switch Cap (Fringe Bottom) *8pcs
 

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V3+ version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:

• Switch Cap BLACK (Fringe Bottom) 8pcs
• Cap Sticker 8pcs

Description:

Tired of Stock switch and cap color? Time to refresh your Transmitter!
New V3+ version, comes with metallic cap stickers.
Gives you more options to customize your Transmitter.

Contents:

• Switch Cap BLUE (Fringe Bottom) 8pcs
• Cap Sticker 8pcs

TX Switch Knobs Cap BLACK Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLACK Short V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs

TX Switch Knobs Cap BLUE Long V3 (2pcs, Fit All Brand TX)

Contents:

• Switch Knobs Cap x 2pcs
• O-ring x 2pcs
• Hex Nut x 2pcs