TX & RX Accessories

High-performance electronic switch

Ultra-light unit, compact format

Regulated output voltage

Redundant switch and regulator circuitry

User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated

Separate RGB LED voltage indicators for each battery

Telemetry support for CORE systems

Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH

Regulator monitoring

Suppression of servo feedback currents

Technical specs

• Operating voltage 4.0V - 9.0V
• Power supply 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
• Current drain Power-on state 23 mA
• Current drain Standby 4 μA
• Maximum load current max. 10 A
• Drop-out voltage 0.1 V
• Output voltage 6.0 V/ 7.0 V/7.6 V stabilised or non-regulated
• Dimensions 50 x 18 x 11 mm

Don't freeze your fingers off when flying in winters with the new the Hyperion Heated Transmitter Glove 5V, USB Powered). The new Hyperion transmitter glove now comes with a built-in heating element that works off 5V so you can plug in any USB power bank or source (2.1A) needed, and enjoy flying without freezing your fingers. This is a must have item for low temperature and winter flying season. The Hyperion transmitter glove is designed to fit almost all transmitter antenna styles, and allows for neck-straps too.

Made from heavy weight nylon/polyester material, durable transparent cover that wont get brittle in near freezing temperatures and padded inside with cotton/nylon material to insulate and protect against rain, sleet or snow. A must have for the RC enthusiast who wants to keep flying/driving in cold weather/climate and also for competition pilots/drivers who want to show their best even in the cold temperatures. No programming required just plug in an USB source 2.1A and select from the 3 modes Low/Medium/High as per temperature outside. The adjustable modes let you choose from 25C~50C max temperature is  55-60C degree. The glove is nicely lined with a heat reflective material, helps keeps your fingers warm & snug.

You now have one less reason to avoid going outside to enjoy your model aircraft during the winter!

Features:

• PVC coated fiber glass fabric with heating element
• Selectable 3 modes Low/Medium/High temperature settings
• Works on 5V USB DC directly
  
• Min temperature 25 degree and Max temperature 55C +- degree
• Accepts all size transmitters

Specifications:

• Material: PVC coated fiberglass fabric
• Max Transmitter Size: 270 x 270mm
• Min. Temperature: 25degree
• Max. Temperature: 50degree
• Input voltage: 5V USB, 2.1A
• Idle Current: <30mAh
• Modes: Low/Medium/High
• Connector: USB
• Weight: 301g

Included with the package:

• Hyperion Heated Transmitter Winter Glove 5V usb x 1
  

Don't freeze your fingers off when flying! The Hyperion transmitter glove is a must have item for low temperature and winter flying season. The Hyperion transmitter glove is designed to fit almost all transmitter antenna styles, and allows for neck-straps too.

Made with a heavyweight nylon/polyester material, durable transparent cover that wont get brittle in near freezing temperatures and inside padded cotton/nylon material to insulate and protect against rain, sleet or snow.

You now have one less reason to avoid going outside to enjoy your model aircraft during the winter.

Specification:

• Max Transmitter Size: 270 x 270mm
• Radio and strap are Not included
  

Jeti AC adapter for charging the Jeti transmitter

Jeti Altimeter-EX for Duplex 2,4GHz System

MAlti EX is a system that measures atmospheric pressure and using the obtained data it calculates the altitude above sea level and relative altitude above the ground. The sensor also alerts you if any alarm setting is exceeded.
The sensor data can also be transmitted via the Duplex system to the user.

The Duplex system takes advantage of the 2.4GHz band for communication. This system not only transmits control data to the model but also sends data from the model back to the transmitter. The telemetry data collected during operation is shown as actual, measured values in real time on either LCD screen of a connected JETIBOX or on the DC/DS JETI model transmitters.

Main features:

• Measurement of altitude, pressure, and temperature.
• Possible sound alarm signaling using a JETI Tx module (EU only) or JETIBOX profi.
• The device is compatible with EX Bus protocol, i.e. it is possible to be configured comfortably via a special menu in DC/DS JETI model transmitters.
• Firmware updates.

MAlti Technical data:

• Resolution of measured height 0.1m
• Measurement range 300÷1100hPa

Specification:

• Weight [g]     4
• Dimensions [mm]     28 x 16 x 5
• Operational temperature [°C]     -10 > 85
• Supply Voltage [V]     3.5 > 8,4
• Average Current [mA]     15

  

Jeti Aluminum stick tops for JETI transmitter tray black - red

(Without hopper / base)

Patch cable, both sides with plug suitable for DuplexTU 4x 0.15
This patch cable is ideal for connecting the original RF module and the Duplex TU module.

Jeti DUPLEX 2,4EX 4-point adjustable Harness

For tray of the DC-16 transmitter or consoles from other manufacturers. It is a so-called cross strap and allows to carry the transmitter over long flight times. The Jeti Duplex Harness is equipped with soft cushions in the neck area. High quality embroidered logos duplex.

Jeti DC - Replacement Switch 1-Spring-DOWN 3-Position

 

Jeti DC / DS TDx MSW Expansion Module

Jeti Encoders long for DS Transmitter (2 pcs)

Jeti Joystick grips for DS Transmitter

Neck Strap for DC-16 - longer variant compared to DS-16 neck strap

Neck Strap for DS-16

Jeti PPM DSC Socket (mono) for Jeti Duplex DC16 Transmitter

Jeti PPM DSC Socket (stereo) for Jeti Duplex DC16 Transmitter

Jeti Replacement Switch for DC-16: Long 2 Position

Jeti Replacement Switch for DS-16: Long 3 Position

Jeti Replacement Switch for DS-16: Short 2 Position

Jeti Rx Bind Plug

Jeti Safety switch for DC-16

Description:

Jeti Safety switch with 2 Poles Cable to fit Duplex TU2

Manuals - Duplex EX

Jeti Duplex receiver EX V3.22 Manual [EN, DE] - English & German user manual for the receiver's version 3.22 (6/2014)

Declaration of Conformity CZ + EN - Standards compliance

Jeti Duplex EX Manual V3.0 EN + DE - English & German user manual for Tx modules and receivers (6/2011)

Rx + Rsat Jetibox scheme V3.0 EN + DE - Jetibox screen schemes of the receivers and satellites

Mounting kit for the transmission module duplex TU2 for switching between the two modules.

 

The SPS 20 (single electronic switch) is an electronic switch mainly meant to switch supply voltages of receivers / servos, regulators, fuel pumps or similar equipment. A big advantage of electronic switches in comparison to mechanical ones is in general their higher reliability as far as vibration resistance is concerned. Another advantage of the electronic switch is given by its practical ability to withstand an unlimited number of switching cycles.

Electronic switches have no moving parts like contacts which would be wearing out during switching processes, therefore their durability is extremely long. Moreover, they are not prone to spontaneous and unexpected false tripping with known disastrous effects. Last but not least, electronic switches offer much lower inherent transient resistance in comparison to mechanical switches.

The electronic switches SPS 20 are operated with the aid of a magnetic switch which can be fixed to the fuselage or elsewhere. The system becomes switched on or off with application of a special magnet.

The switc SPS 20 is admittedly intended for the purpose of switching supply voltages of receivers and servos, but they may be as well successfully used for other DC switching tasks.

• Weight [g]: 27
• Dimensions [mm]: 46 x 45 x 6.5
• Sustained current [A]: 10
• Telemetry: No
• Operational temperature [°C]: -20 ... 85
• Recommended input voltage [V]: 3,5 ... 14
• Idle current: 160
• Number of battery inputs: 1
• Input voltage max: 16V
• Peak current (max 5s): 20A

Jeti Taster Long-Pos 3. for DC-16

The EXPANDER E2 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 2 sensors to a DUPLEX receiver. The expander can be set in a way which enables the JETIBOX to show several measured values simultaneously.

Specification:

• Weight [g]: 4
• Dimensions [mm]: 27 x 14 x 5
• Operational temperature [°C]: -10 ... 85
• Supply Voltage [V]: 3,2 - 8,4
• Average Current [mA]: 5

The modules EXPANDER E4 EX are used to expand the number of connecting places for further telemetric sensors. In this mannner it becomes possible to connect up to 4 sensors to a DUPLEX receiver. The expander can be set in a manner which enables the JETIBOX to show measured values of concern simultaneously.

Parameters

• Dimensions [mm]   36 x 20 x 5
• Weight [g]   4
• Temperature Range min.[°C]   -10
• Temperature Range max. [°C]   +85
• Supply Voltage min. [V]   3,2
• Supply Voltage max. [V]   8,4
• Average Current [mA]   8

The MULi 6s Module is a sensor designed to monitor the Li-xx battery voltage, which measures the voltage of each battery cell via the balance connector. It allows you to monitor the voltage of up to 6 Li-xx cells per module. The individual MULi 6s modules can be serialized and can be connected to up to 5 modules. The MULi 6s Module sensor monitors the voltage of each battery cell with its history (minimum, maximum), the total battery voltage, the voltage difference between the strongest and the weakest cells, and the sensor is able to alert the operator to exceed the set parameters by means of alarms. Sensor information is transmitted by the Duplex system to the operator.

Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor all your battery voltage data and alarm conditions in real time. For proper MULi6s function the transmitter version at least 2.20 (or newer) and the receiver version 3.14 (or newer) is necessary. Make sure that in the Devices folder of your SD card you have a configuration file "MULI6M.bin".

Measures: 0V to 4.4V (per Cell)
Supply Voltage: 3.5V to 8.4V
Dimensions: 33mm x 18mm x 5mm
Weight: 6g
Current Draw: 25mA
Connected Modules: Up to 5
Number of Cells: Up to 6S
Alarms: Programmable w/JetiBox Mini/Profi and Jeti Transmitters

Jeti RPM sensor EX for BL Motors

The sensor MRPM EX-AC is used exclusively for measuring the speed of brushless DC motors (BLDC). It is connected to any two motor phases and it calculates the current speed from the electrical course at the phases. With the help of the sensor MRPM-EX AC, current speeds and the past course of the propeller performance (minimum, maximum) can be monitored.
The sensor can be adjusted to set the timeout parameter which will be later announced to the user. Because the sensor is connected to the motor power system, the user must adjust the number of motor poles and the gear ratio of the transmission system to ensure proper operation. The information from the sensor are transmitted to the user via the Duplex system.

Specification:
 

• Weight [g]: 6
• Dimensions [mm]: 19 x 14 x 4
• Operational temperature [°C]: -10 ... 85
• Supply Voltage [V]: 3,5 - 8,4
• Average Current [mA]: 10

The USB Adapter transfers information between a PC and Jeti model products.
It is, in fact, an adaptation means between the PC USB interface and the data connector Ext. with appropriate USB support, provided in Jeti model products.
All types of equipment marked with the label symbol USBa are prepared for firmware updates.

Jeti Transmitter Brackets (Holder TX) DC-16/DS-16

Jeti Transmitter Replacement Momentary Button Switch DC

Jeti Transmitter Replacement Momentary Button Switch DS

Jeti Transmitter Stick Ends DC 23mm M4 (2)

Fits DC-DS- 14/16

Jeti Transmitter Stick for DC/DS-16 & DS-14 - 2 position switch

Jeti Transmitter Stick for DC/DS-16 & DS-14 - 3 position switch

Jeti Transmitter Stick for DC/DS-16 & DS-14 - potentiometer