Align T-Rex 700 Nitro

Engine fan mount x 1(9.5x22x31mm)
Socket head spring screw x 2(M4x8mm)
Socket screw x 2(M3x12mm)
Socket button hrad screw x 4(M4x5mm)

Specification:

●Engine mount(L) x 1(49.8x16x8.5mm)
●Engine mount(R) x 1(49.8x16x8.5mm)

Specification:

●Engine gear x 1(Φ15.4xΦ7x40.9mm)
●Clutch nut x 1(Φ14x6mm)

Specification:

●Front frame brace x 1
●Rear frame brace x 2
●Switch mount x 1

 6061-T6 Aluminum alloy material and CNC processed.
Use for Black Shark Ⅲ Fuselage.

Includes :

• Frame Mount x 1
• Mount Foam x 1
• Socket screw(M3 x 8mm) × 1

Fuel tank guard x 1

Use for Black Shark Ⅲ 700 fuselage.

Specification:

Landing skid x 2

Skid pipe x 2(Φ6xΦ8x350mm)

Skid pipe end cap x 4

M3 Set screw x 4(M3x4mm)

Socket screw x 4(M3x10mm)

M3 washer x 4(Φ3xΦ8x1)

Use for T-Rex 700E

Front drive gear assembly x 1
(Φ5xΦ7.8x53mm) Modulus:1
Short umbrella gear (24T) x 1(Φ10.5xΦ7x25.4mm)
Long umbrella gear x 1(Φ12x8.2mm)

Specification:

Metal Main rotor holder arm x 2
Socket collar screw x 4(M3x6mm)

Specification:

Main Rotor Housing x 1
Bearing MF95ZZ x 2
Feathering shaft sleeve x 2
Damper Rubber(Red) x 2
Damper Rubber(Black) x 2
Socket Button Head Collar Screw(M4x24) x 1
Socket button head screw(M4x8) x 2
Locking nut(M4) x 1

Specification:

Main shaft spacer(1) x 1(12x16x1mm)
Main shaft spacer(1.2) x 1(12x16x1.2mm)
Main shaft spacer(0.8) x 1(12x16x0.8mm)
Main shaft spacer(0.5) x 1(12x16x0.5mm)

Specification:

●Metal aileron lever x 2(Φ11xΦ9x12mm)
●Bearing MR95ZZ x 4(Φ5xΦ9x3mm)
●Linkage ball C(M3x3.5) x 6(Φ5x8.5mm)

Use for T-REX 700 Nitro Pro / 700E,

• Metal aileron lever x 2(11x9x12mm)
• Bearing MR95ZZ x 4(5x9x3mm)
• Linkage ball C(M3x3.5) x 6(5x8.5mm)

Metal clutch bearing block x 2
●Hex mounting bolt x 2(Φ2.5x60.5mm)
●Scoket screw x 2(M3x8mm)
●Socket button head collar screw x 4(M3x8mm)

Specification:

●Metal flybar control arm x 2
●Flybar control rod x 2(Φ5x4.5x71mm)
●Scoket screw x 4(M3x6mm)
●M4 set screw x 2(M4x4mm)

Specification:

Metal flybar control arm x 2
Flybar control rod x 2(Φ5xΦ4.5x71mm)
Scoket screw x 4(M3x6mm)
M4 set screw x 2(M4x4mm)

Specification:

●Metal flybar seesaw holder x 1
●Bearing MR104ZZ x 2(Φ4xΦ10x4mm)
●Bearing MF105ZZ x 2(Φ5xΦ11.2xΦ10x4mm)
●M4 collar screw x 2(Φ5xΦ6.5x10mm)
●Socket button head screw x 2(M3x12mm)
●Washer x 4(Φ3xΦ4.8x0.3mm)

Specification:

●Metal bearing holder x 2
●Bearing 6901ZZ x 2(Φ12xΦ24x6mm)
●Socket button head collar screw x 8(M3x8mm)

Specification:

●Metal SF mixing arm x 2
●Socket button head screw x 2(M3x12mm)
●Linkage ball C(M3x3.5) x 4(Φ5x8.5mm)
●Bearing 683ZZ x 4(Φ3xΦ7x3mm)
●Collar x 2(Φ3xΦ4.9x1.5mm)
●Washer x 4(Φ3xΦ4.8x0.3mm)

Specification:

●Metal stabilizer belt(Upper) x 1
●Metal stabilizer belt(Lower) x 1
●Socket collar screw x 2(M3x22mm)
●Socket screw x 2(M4x12mm)
●M3 specialty washer x 2(Φ3xΦ8x2mm)
●M4 washer x 2(Φ4xΦ10x1mm)

Metal Tail Pitch Assembly

Use for T-REX 700N DFC / 700X / 700L / 700L V2 / 800E F3C / 800E PRO DFC (not 800E DFC)
6061-T6 Aluminum alloy material and CNC processed

Included:

• 2x Control link (14.75x6x3.9mm)
• 2x 700 Collar (2.5x3.5x4mm)
• 1x 700 Metal T type arm (28x12x11.5mm)
• 1x 700 Bearing holder (12x15.4x11mm)
• 1x 700 Collar (8x9.4x4mm)
• 1x 700N Slide shaft (6x8x21mm)
• 2x Bearing MR128ZZ (8x12x3.5mm)
• 2x Collar screw (M2x8mm)
• 2x Socket Button Head Collar Screw (M2.5x8mm)
• 2x Screw (M2x8mm)

Specification:

●Metal washout base x 1
●Socket button head screw x 2(M3x12mm)

Suitable for T-REX 700/800
Highly enhance structural strength, effectively increase the torsional capability.

Content:

• 1x Motor Slant Thread Pinion Gear 13T
• 2x M4 set screw (M4x4mm)

Suitable for T-REX 700E / 700N. 6061-T6 Aluminum alloy material and CNC processed. Specification: Metal Main rotor holder x 2 MR6800ZZ Bearing x 4(Φ10xΦ19x5mm) Washer x 4 Socket collar screw x 2(M5x32mm) M5 nut x 2 Bearing HF10-18M x 2-DISCONTINUED

Use for T-REX 800 / 700 series

Content

• 1x One-way Bearing FE-423Z (15x23x11mm)

Specification:

●One-way bearing shaft x 1(Φ12xΦ15x41.5mm)

Use for T-REX 700 Nitro Pro / 700E / 700L / 800E. Enhance structural strength also extend one-way bearing durability and service life.

Specification:

●GF painted canopy x 1
●Canopy nut x 4(Φ2.7xΦ7xΦ11x2.5mm)
●Canopy protector x 4
●R4 pin x 4

● Radius arm x 2

Specification:

Receiver mount x 1(24x61x138.15mm)
Socket button head collar screw x 6(M3x8mm)
Aluminum Hexagonal Bolt x 4(Φ2.5x60.5mm)

6061-T6 Aluminum alloy material and CNC processed.
Use for Black Shark Ⅲ 700 fuselage.

Specification:

• Guide x 1
• Carbon Mount x 1
• M3 Set screw x 1(M3x3mm)
• Socket screw x 2(M3x8mm)
• Governor mount × 1
• Socket button head self tapping screw × 2(T2.6x6mm)
• Socket button head self tapping screw × 2(T2x6mm)

Specification:

●Linkage rod(E) x 3(1.96x72mm)
●Linkage rod(F) x 5(1.96x87mm)
●Tail rudder control rod A x 1(1.96x260mm)
●Tail rod A carbon fiber tube x 1(2.1xΦ4x243mm)

Use for T-REX 700X / 700N / 700E / 800E
Weight: 44g
Dual radial bearing with thrust bearing design to dramatically increase rudder precision and gyro locking action.

Comment

Compatible with Torque Tube Rear Drive Gear Set (NH7042A).

T-Rex 700N DFC Torque Tube #H7NT004A

Specifications:

Torque tube x 1

Torque Rod Sleeve x 2(7.95x10.5x5mm)

Bearing MR148ZZ x 2(8x14x4mm)

Instruction:

Use for T-REX 700 Nitro DFC.

6061-T6 Aluminum alloy material.

Specification:

Tail boom mount(Left) x 1
Tail boom mount(Right) x 1
Hex mounting bolt x 4(2.5x60.5mm)