Transmitters & Radios

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on vstabi web, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screendesign directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Delivery including:

- VBar Control Touch (formerly known as 05130)
- VBar NEO VLink 04949

NEW: Mikado VBar Evo+ Full Digital Gimbals Transmitter Arctic Silver

The TX comes with 7000 mah BATTERY, if you wish to upgrade to 14,000mah, please choose the option. Please take 2-3 days extra delay due the replacement

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models via the familiar VBar setup wizard.
• ESC setup wizard for programming all types of speed controllers.
• ESCs with VBar Control support can be programmed directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

• Extra bright capacities 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in three seconds.
• High performance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models via the familiar VBar setup wizard.
• ESC setup wizard for programming all types of speed controllers.
• ESCs with VBar Control support can be programmed directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

• Extra bright capacities 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in three seconds.
• High performance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models via the familiar VBar setup wizard.
• ESC setup wizard for programming all types of speed controllers.
• ESCs with VBar Control support can be programmed directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

• Extra bright capacities 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in three seconds.
• High performance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models via the familiar VBar setup wizard.
• ESC setup wizard for programming all types of speed controllers.
• ESCs with VBar Control support can be programmed directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in three seconds.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models via the familiar VBar setup wizard.
• ESC setup wizard for programming all types of speed controllers.
• ESCs with VBar Control support can be programmed directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in three seconds.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Included in set: Mikado VBar NEO VLink 6.1 Express

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models via the familiar VBar setup wizard.
• ESC setup wizard for programming all types of speed controllers.
• ESCs with VBar Control support can be programmed directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in three seconds.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector or built-in charger.
• Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

RadioLink AT10 2.4GHz 10CH Remote Control System 10 Channel Transmitter Receiver R10D for RC Helicopter/Plane- orange version

Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio.

3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.

Great control distance: 1.1km on the ground,2km in the sky. Expansion feedback module,users can get plane details in real time. Make very setting clear and exactly output result.

Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.

High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.

Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology.

Unbelievable price, high quality as supper bland, and more exactly, faster response, higher resolution,one and the only one anti-jumping DSSS technology.really worthy to have it.

Technical Parameter:

•     Dimension:18×9.5×22cm;
•     Weight:0.95kg;
•     Frequency:2.4GHz ISM band(2400MHz~2485MHz);
•     Modulation mode:QSPK;
•     Channel bandwidth:5.0MHz;
•     Spread spectrum:DSSS;
•     Adjacent channel rejection:>38dBM;
•     Transmitter power:  <100mW(PCB testing), <20dBm(3 meter air testing);
•     Operating Voltage:8.6~15V;
•     Operating Current:<95mA;
•     Control distance:800 meters ground;
•     Channel:10 Channel,8~10 channel are customizable;
•     Compatible model: Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider,five flying model;
•     Simulator model:under the simulator model the transmitter action turn off,change to power saving model;
•     Screen:16 colorful screen,size 78×52mm,320*480 pixel.

Package list:

• 1 * RadioLink AT10 10CH Transimitter (Model 2)
• 1 * R10D 10Ch Receiver
• 1 * PRM-01 Voltage Return Module
• 1 * 4Pin Connector
• 1 * Manual

Get extra receiver free!!!  The AT9 IS A new radio which can be compatible to RC copter, fixed-wing airplane and so on. Meanwhile, the new remote controller makes the first progress towards its outer structure, and everyone will be obsessed with AT9 for the first sight. Namely, there are three three-way switches, four two-way switches, one return switch and four adjustable potentiometers, all of which are in neat arrangement providing both power and elegance sense. The most important thing is, RadioLink AT9 is completely designed in line with human ergonomics, effectively making enthusiasts more comfortable while using it.

In addition, the mini receiver is another progress of AT9. It is said that the receiver is of super mini size, very convenient to install and suitable for playing mini models. What’s more, the receiver is compatible to S-BUS, which can perfectly support multi-rotor aircraft. Due to its small size and light weight, the receiver really reduce much burden for a certain aircraft.it is widely recognized that some remote controller support online upgrade As for AT9, you can reach upgrade just via the mobile phone USB data wire.

Last but not least, RadioLink AT9 owns wonderful vibration alarm. If you are experienced enthusiasts, you must know that traditional alarm can’t be head in relatively noisy environment. Only vibration alarm can make a distinctive warming to protect your aircraft

Both helicopter model and airplane model are available.

2.Function and performance updated with better safety.

3.Faster response.

4.All seven Channels have trim setting function and none interference between one another from channel 1 to channel 6 under CCPM mode.

5. Transmitter hops spectrum while powering on

6.Transmitter will detect whether the current spectrum channel was occupied when its power on, and it will hop to the next one until which it’s not occupied. The receiver will search and match with the transmitter which shares the same identity code.

7.6. Code matches wirelessly

8.Each transmitter has a unique identity code of its own, the receiver will search and bind with the nearest transmitter while pressing the code matching button on it. There is no need to match again in future use once its matching successfully.

9.7. High anti-interference capability

10. Adoption of FHSS technology makes our products have excellent anti-interference capability, and helps the models always be in control easily.

11. 8.High suppression ratio of Adjacent Channels

12. 9 .Fully comply with FCC&CE standards

13. 10.Stable RF range

14. With FHSS technology, its control range reaches 350 meters on ground and 700 meters in air.

15. 11. Throttle on right/left-hand interchangeable.

16. 12. LCD screen, manual programming is available. (Model type ACRO: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve,programmable mix 1,programmable mix 2, flaperon mixing, flap trim, v-tail mixing, elevon mixing and auxiliary function. Model type HELI: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve, normal pitch curve, idle-up throttle curve, idle-up pitch curve, throttle hold, revolution mixing, gyro sensitivity, swash-throttle mixing/ swashplate types and auxiliary function.)

17. 13. Low-battery warning function

18. The low battery alarm continuously beeps and LED flashes when voltage drops to 8.6V. 14.Trainer cable,power charging jack.

Technical Parameters

• Size:17cm*8.5cm*20cm
• Weight:560g (battery not included)
• Transmitting on 2.4G band
• Modulation:FHSS
• Operating system: 2-stick, 7-channel system
• Power supply: 12V battery (8 pieces 5# batteries)
• Current drain: 87mA(Energy Saving)
• MODE -All (user changeable)
• Color can be varied, White or gray
  

Sky hero Arctic white AT9 2,4Ghz 9ch Telemetric Transmitter Only (All modes), receiver NOT included

The AT9 IS A new radio which can be compatible to RC copter, fixed-wing airplane and so on. Meanwhile, the new remote controller makes the first progress towards its outer structure, and everyone will be obsessed with AT9 for the first sight. Namely, there are three three-way switches, four two-way switches, one return switch and four adjustable potentiometers, all of which are in neat arrangement providing both power and elegance sense. The most important thing is, RadioLink AT9 is completely designed in line with human ergonomics, effectively making enthusiasts more comfortable while using it.

In addition, the mini receiver is another progress of AT9. It is said that the receiver is of super mini size, very convenient to install and suitable for playing mini models. What’s more, the receiver is compatible to S-BUS, which can perfectly support multi-rotor aircraft. Due to its small size and light weight, the receiver really reduce much burden for a certain aircraft.it is widely recognized that some remote controller support online upgrade As for AT9, you can reach upgrade just via the mobile phone USB data wire.

Last but not least, RadioLink AT9 owns wonderful vibration alarm. If you are experienced enthusiasts, you must know that traditional alarm can’t be head in relatively noisy environment. Only vibration alarm can make a distinctive warming to protect your aircraft

Both helicopter model and airplane model are available.

2.Function and performance updated with better safety.

3.Faster response.

4.All seven Channels have trim setting function and none interference between one another from channel 1 to channel 6 under CCPM mode.

5. Transmitter hops spectrum while powering on

6.Transmitter will detect whether the current spectrum channel was occupied when its power on, and it will hop to the next one until which it’s not occupied. The receiver will search and match with the transmitter which shares the same identity code.

7.6. Code matches wirelessly

8.Each transmitter has a unique identity code of its own, the receiver will search and bind with the nearest transmitter while pressing the code matching button on it. There is no need to match again in future use once its matching successfully.

9.7. High anti-interference capability

10. Adoption of FHSS technology makes our products have excellent anti-interference capability, and helps the models always be in control easily.

11. 8.High suppression ratio of Adjacent Channels

12. 9 .Fully comply with FCC&CE standards

13. 10.Stable RF range

14. With FHSS technology, its control range reaches 350 meters on ground and 700 meters in air.

15. 11. Throttle on right/left-hand interchangeable.

16. 12. LCD screen, manual programming is available. (Model type ACRO: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve,programmable mix 1,programmable mix 2, flaperon mixing, flap trim, v-tail mixing, elevon mixing and auxiliary function. Model type HELI: model select/ data reset/ model type select/ model name, reversing, dual rates/ exponentials, end point adjustments, trim, normal throttle curve, normal pitch curve, idle-up throttle curve, idle-up pitch curve, throttle hold, revolution mixing, gyro sensitivity, swash-throttle mixing/ swashplate types and auxiliary function.)

17. 13. Low-battery warning function

18. The low battery alarm continuously beeps and LED flashes when voltage drops to 8.6V. 14.Trainer cable,power charging jack.

Technical Parameters

• Size:17cm*8.5cm*20cm
• Weight:560g (battery not included)
• Transmitting on 2.4G band
• Modulation:FHSS
• Operating system: 2-stick, 7-channel system
• Power supply: 12V battery (8 pieces 5# batteries)
• Current drain: 87mA(Energy Saving)
• MODE 2 ( user changable)
• nO RECEIVER in the kit

The Skydroid H16 STD/ PRO is a great alternative to the Herelink Black ground station with a number of solid ease-of-use improvements. The Skydroid H16 allows you to manually fly your drone, view a live video feed from the aircraft at all times, and program automated missions on a Google Maps overlay.

Flight range in STD version is 10km- VS PRO , which is 30KM

The Skydroid H16 VS 16 Pro has the following features:

• 7-inch HD highlight display, which is the largest and brightest screen of any of our transmitter options
• RJ45 Ethernet port available
• Independent joystick and additional switches available for better gimbal and payload control
  • Flight range up to 10km- VS PRO , which is 30KM
• 3 Functions in 1 unit – view live HD video feed at all times, manually fly the aircraft, and program auto missions using a Google Maps overlay
• Touchscreen for ease of use
• QGroundControl & Mission Planner installed
• See the live aircraft location on a Google Maps interface
• 2 mini HDMI video ports allow you to have two cameras connected and switch between the video feeds
• AES-128 Encryption
• The included 1080P HD Camera is installed on a fixed front-facing mount on your drone, however, it can be installed in a different position upon request

Included in the set

• 1x H16/Pro Remote Controller- choose option
• 1x H16/ PRO Receiver
• 1x MIPI Camera
• 1x Antenna for Ground Control Station
• 1x Charger for Ground Control Station
• 1x Neck Strap
• 1x Cable Package

• Build in high efficiency antenna to avoid delay in digital transmission. For safety flying
• Build in intelligent communication. Increase the stability of long distance transmission. Dual antenna dual module
• Supported by FHSS technology. The longer distance can reach 20km
• Hall sensor gimbal with permanent magnetic sensor make longer life to 30 years. Military grade anti dust protective gimbal cover
• Remote dimming camera with &w LED can capture video clearly at night
• Bluetooth plus USB wire provide reliable link up
• 24hrs continues working with one charge
• Legal 100mw output power comply with related certificate for export
• Battery is MSDS certified so it is allowable to carry on the plane

Item name: T12 Transmitter
Number of channels: 12 channels
Frequency: 2.400-2.4833GHz
Working voltage: 3.7V(1s Li-ion)
Working Current: 130mA
Modulation: New FHSS
Weight: 560g
Firmware: APP online
Dimension: 225*123*35mm
Duration: 25 hours
Battery Capacitor: 4000mA
Charge Port: MICRO-USB
Application: Helicopter,Fixed wing,Quadcopter,car boat

R12 Receiver:

Model: R12
Number of channels: 12 channels
Working voltage: 4.5-5.5v
Working Current: 140mA@5V
Dimension: 51*41*13MM
Weight: 14g

Package Included:

• 1 x T12 Transmitter
• 1 x R12 Receiver
   

Futaba T16IZ Super – 18-Channel Transmitter + R7208SB Receiver

Power, Precision & Versatility in One Transmitter

The Futaba T16IZ Super is a high-end 18-channel radio system designed for demanding RC enthusiasts. With multi-protocol support (FASSTest, T-FHSS, S-FHSS), a vibrant high-resolution color touch display, and an array of advanced features, it combines top-tier functionality with a sleek and ergonomic design.

What’s in the Box:

• Futaba T16IZ Super transmitter (Mode selectable: 1/2/3/4)
• 2x R7208SB receivers included
• LiPo 2S 7.4V 2100mAh battery
• USB-C charging cable
• User manual

Key Features:

4.3” HVGA Color Touchscreen

• Transflective – easy to read even in direct sunlight
• Smooth and responsive interface
• Quick access to all settings

18 Channels – 8 Flight Conditions

• Suitable for planes, helicopters, gliders, drones, jets, etc.
• Comprehensive model programming options

Advanced Telemetry with Voice Alerts

• Real-time data on voltage, RPM, temperature, and more
• Fully customizable voice notifications

Multi-Protocol Transmission Systems

• FASSTest (high-speed bidirectional)
• T-FHSS (full telemetry support)
• S-FHSS (legacy compatibility)

Modern Connectivity & Extra Functions

• USB-C charging
• USB Joystick mode for simulators (Windows compatible)
• S.BUS and S.BUS2 support for servos, gyros & sensors

Unlimited Model Storage via microSD

• Store and organize all your models
• Firmware updates made easy
• Import/export model data in seconds

Technical Specifications:

Perfect For:

• Intermediate to advanced RC pilots
• Multi-discipline enthusiasts: helis, planes, jets, gliders
• Those seeking Futaba’s renowned quality with modern features

Why Choose the T16IZ Super?

The Futaba T16IZ Super represents the perfect blend of Japanese engineering excellence and cutting-edge innovation. Whether you're fine-tuning a 3D heli or managing complex telemetry on a turbine jet, this transmitter delivers rock-solid performance and intuitive control every step of the way.