Speed controllers & Parts

Young Generation Electronics ESC with Telemetry, 6-12 Lipo, 135A permanent, BEC 10A / 5,5 - 12V, Modus-setup, (Governor-Mode)

Technical Specifications:

BEC 5,5V - 12V

BEC 10A continuous, 25A Peak

"T" for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL

Update capable (optional USB-Adapter available)

entirely overhauled hard- and software (32-bit)

the PWM-frequency will be set automatically to the requirements of the motor

The specified current is the maximum continuous full power current

6 to 12s LiPo, incl under voltage protection by power reduction

Current limiting

Disconnectable under voltage detection

Electronic speed control (Governor- mode)

Soft start

super soft startup for scale-helicopters possible (60 sec.)

Active free-wheel, allowing unlimited part load operation

Automatic or 6 step adjustable timing

Adjustable EMK brake

F3A(Acro brake (brake force control infinitely adjustable)

Frequency: 16 to 32 kHz

Speed limit: 240.000 rpm (2- Poles)

Temperature and overload warning

Anti- flash: decreases the closing spark

Basic -Programming with mode programming

Fine adjustment and selection of telemetry log with the PC Setup

Suitable USB-adapter optionally available

dimensions (mm): 82 x 43,5 x 26

weight with cables: 178g

Content:

- YGE Aureus 135 V2

- RC-Connection Cable

- Torodial Core

- Fan

- Sticker

- Manual

Supported telemetry-protocols

Graupner HoTT V4
Jeti ExBUS
Multiplex Sensor BUS V2
Mikado Vbar Control
YGE-Protocol for more telemetry-connections for example via S32 (new Jlog)

Technical Specifications:

4 to 8s LiPo, incl under voltage protection by power reduction
BEC 5,0V – 8,4V
BEC 12A continuous, 25A Peak
“T” for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2 or Spirit FBL

Update capable (optional USB-Adapter available)

entirely overhauled hard- and software (32-bit)
the PWM-frequency will be set automatically to the requirements of the motor
The specified current is the maximum continuous full power current
Current limiting
Disconnectable under voltage detection
Electronic speed control (Governor- mode)
Soft start
super soft startup for scale-helicopters possible (60 sec.)
Active free-wheel, allowing unlimited part load operation
Automatic or 6 step adjustable timing
Adjustable EMK brake
F3A(Acro brake (brake force control infinitely adjustable)
Frequency: 16 to 32 kHz
Speed limit: 240.000 rpm (2- Poles)
Temperature and overload warning
Anti- flash: decreases the closing spark
Basic -Programming with mode programming
Fine adjustment and selection of telemetry log with the PC Setup
Suitable USB-adapter optionally available
dimensions (mm): 76,5×34,5×19,5
weight without/with cables: 80g/124g:

Content:

- YGE Saphir 125
- RC-Connection Cable
- Fan
- Sticker
- Manual

Supported telemetry-protocols
Graupner HoTT V4
Jeti ExBUS
Multiplex Sensor BUS V2
Mikado Vbar Control
YGE-Protocol for more telemetry-connections for exapmple via S32 (new Jlog)

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM-frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 8,4V

- high BEC-current rating: 10A permanent / 22A peak

- dimensions in mm: 82 x 39 x 23

- weight with / without cables: 104g / 132g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

The smart adapter cable TexY scales up the telemetry of our new generation of speed controllers (T-series) by four more manufacturer protocols:

Futaba SBUS2,

FrSky S.Port,

Spektrum XBUS,

Powerbox Core

The startup is Plug’nPlay with Autodetect !

Weight: approx. 3g

Dimensions: 39 x 12 x 9mm

USB-interface for programming and updating all LVT- and HVT- speed controllers

YGE Vbar-Adapter for using the LVT/HVT-controller with Vbar-telemetry

RPM-Output connection for using the vbar-governor

Length about 10cm/60cm

Additional long one-piece telemetry cable for use with all Aureus, Saphir and 205HVT ESCs

EMax BLHeli Series 12A ESC for Multicopters (ONESHOT Available) .Based on BLHeli firmware, further optimized to the perfect drive performance. Low-voltage protection, over-heat protection and throttle signal loss protection. Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.

Parameters of the ESC can be set via program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC.
Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

Emax 12a ESC SimonK Series Speed Controller Perfect for the 250 and 300 Size Fpv Racers. Superb esc that provides lightning fast throttle response which is ideally suited to the FPV Racing Quadcopters. The perfect ESC for your 250 quad race project.

 

HOBBYWING XRotor 40A V1

Hobbywing has released XRotor 40AInternational Version B 30901001 under Drone System category

Rapid Throttle Response
Dedicated program for multi-rotor ESCs, which is better than various
open-source programs, greatly improves throttle response.

Easy to Use
All settings except the "Timing (adjustable between High and Intermediate)"
are preset, making usage simple, highly intelligent and adaptive.

Less Signal Interference
The twisted-pair throttle signal cable effectively reduces interference produced
in signal transmission and makes flight more stable and reliable.

Super Low Internal Resistance
Good quality MOSFETs utilized by this XRotor 40A ESC make
internal resistance low but current endurance high.

Super High Throttle Signal
Compatible with various flight-control systems and supports a
throttle signal frequency of up to 621Hz.

Specifications

• Cont./Peak Current : 40A/60A
• LiPo Cells : 2-6S LiPo
• BEC Output : No

Wires & Connectors

• Output Wires : No
• Input Connectors : No
• Output Connectors : 3.5mm Gold Connectors (Female)
• Throttle Range Calibration : Supported
• Stick Programming : Supported
• DEO : Not Supported
• OneShot Mode : Not Supported
• Timing : Supported
• Light Color : Not Supported
• Motor Rotation : Not Supported

Size & Weight

• Size : 65.5x25.0x8.7mm
• Weight : 28g

Applications

• 550/650 Class Multirotors

MPX - MULTIcont BL-37 ESC w/BEC

The universal, compact speed controller MULTIcont BL for brushless motors are ideal for all applications with which depends on maximum performance with low space required and weight need. They distinguish themselves by the simplest, a little bit understandable programming about the gas bat of the remote control.
All speed controller MULTIcont BL are manufactured finishedly, delivered with already soldered M6 plug to the battery connection and with already soldered 3.5 mms of gold sockets to the motor connection.

Specification:

• Cell count, NiXX / LiPo, with BEC: 5 - 9/2 - 3S
• Cell count, NiXX / LiPo, excl. BEC: 5 - 12/2 - 3S
• Permissible continuous current: max. 37 A
• BEC current: max. 3,0 A / max. 3,0 W
• Brake: ON/OFF
• Motor Start security
• Pulse frequency: 13 kHz
• Dimensions (L x W x H) approx.: approx. 38 x 26 x 10 mm
• Weight (incl. cables): ca. 30 g
• Motor / battery connections: 3,5 mm gold-contact socket/M6

Xrotor Pro 40A Brushless ESC Hobbywing for multicopter  with Special core program for multi-rotor controllers greatly improves throttle response.

• Specially optimized software for excellent compatibility with disc-type motors.
• All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
• The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
• Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
• Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
• MOSFET with extra-low resistance brings high performance and great current endurance.

Specifications:

• Contiuous current: 40A, Peak current ( 10s ): 60A
• BEC: No
• NO. of cells: 2 - 6S
• Wired or Cob- stock dependant

DEO ( Driving Efficiency Optimization ) technology significantly improves throttle linearity and driving efficiency
 

Xrotor Pro 50A Brushless ESC Hobbywing for multicopter with Special core program for multi-rotor controllers greatly improves throttle response.

1. Specially optimized software for excellent compatibility with disc-type motors.
2. All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
3. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
4. Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
5. Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
6. MOSFET with extra-low resistance brings high performance and great current endurance.

Specifications:

1. Cont/Peak Current 50A /75A
2. Multicopter Applicable Over 650 Class Quadcopter
3. Input:2-6S Lipo
4. Bullet connector size:3.5 mm
5. BEC Output:NO

Programming item Timing (High/Intermediate), LED (On/Off), LED Color (Red/Green), Motor Rotation(CW/CCW)

• Size :48 x 30 x 15.5mm
• Weight 46g

Set of 1 pcs.

Hobbywing Platinum PRO V4 - 80A (3S-6S)

This is the Hobbywing Platinum Pro V4 80A ESC, for use with 450-480 sized Helicopters.  

One of a Kind Design
The elegant case is made from aluminum alloy material. Each cooling slot and its fin were carefully designed and arranged, and the case has gone through oxidation, coloring and edge-highlighting.

Innovative Heat Dissipation Structure
The innovative "duo" stacking structure allows all components on both sides of the printed circuit boards to quickly conduct heat to the aluminum case.

Excellent Motor Speed Governing
The high performance 32-bit processor, combined with advanced algorithm, makes the motor speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Super Soft Start-Up
The Platinum 80A makes the motor start extremely soft and avoids tail-drift issues. The start-up time is adjustable within 8 to 25 seconds. This will definitely create a perfect starting point for every flight.

Super BEC
The built-in switch mode BEC with a continuously adjustable output voltage, range from 5V to 8V (steps: 0.1V). It is certain to put out the power you need for rapid, precise steering servo operation.

Great Current Endurance
A high-quality and high-voltage MOSFET with a great current endurance guarantees the ESC's safety especially in a extremely high power demanding situation.

Built-in Sparkproof Circuit
Built-in sparkproof circuit effectively eliminates sparks produced at the "powering-on" moment and prolongs the connectors lifespan.

Specifications:

• Main Applications: 450-500 Class Helis
• Governor: Internal
• Built-in BEC: Yes; Switch Mode: 5V-8V, 10A
• Continuous Current: 80A
• Cell Count: 3-6S
• Case: Aluminum Alloy Shell
• Programming: LCD Program Box, WiFi Module, via Separate Program Port
• Peak Current: 100A
• Weight: 97g
• Dimensions: 84.3x38.2x20.4mm
• DEO Technology: Yes
• Spark-Proof: Yes