Speed controllers & Parts

Please note Kontronik produce on Order! we always want to have fresh esc, with latest FW. if you need it urgent contact before ordering to verify delivery time!

Latest version incl. hardware change!
High end regulator 160A duration to 5-14S Lipo incl.
HV BEC 20A (tip) 7A duration, incl.
MicroSD data recording - the new reference in combination with the new Pyro 800/850 engines ... see details

The specially developed housing not only protects, but is an essential part of the controller concept.
Despite extremely good efficiency, residual heat in the incandescent lamp area is created with these performance dimensions.
Therefore, the upper aluminum plate is directly connected to the final stage.

With the KOSMIK KONTRONIK defines a new high-end level. Even at first glance, it becomes apparent that the KOSMIK is something completely new.
The KOSMIK is resistant to continuous current up to 200 A and up to 14 S - that is 10 kW continuous power, even 12 kW at peak times.
The specially developed housing not only protects, but is an essential part of the controller concept.
Despite extremely good efficiency, residual heat in the incandescent lamp area is created with these performance dimensions.
Therefore, the upper aluminum plate is directly connected to the final stage.
By putting a variety of heatsinks in your hand, you have it in your hands how much power your KOSMIK can process in the long run.
The lower aluminum plate allows a stable attachment in the model. Of course, the KOSMIK has an anti-flash function.

The most powerfulBEC that KONTRONIK has ever developed is a sensational one.
With a continuous current rating of 10 A (KOSMIK 160 + HV: 7A) and up to 30 A (KOSMIK 200 + HV: 20A) for a short time with an output voltage of 5 - 8 V, the KOSMIK is also ideally suited for high-performance servos.
Without interference problems and voltage fluctuations, this powerful BEC is fully operational up to 14 S.
This is unique. To use the full BEC power, the use of a second BEC cable is necessary.
Therefore, the KOSMIK has 2 BEC connections.
Many times programmable

Proven mode programming is also implemented in KOSMIK.
Thus, the controller is ready for use quickly and can be adapted to different applications within a very short time.
The Kosmik can be parametrized via the PROGDISC.
This programmer makes it possible to change individual parameters and helps to adapt the KOSMIK to personal preferences.
Of course, the KOSMIK is also online updateable.
This software updates can be conveniently installed at home.
Downtime is a thing of the past.

• Communication at a glance
• Two bi-color LEDs give the KOSMIK a wide range of signal outputs.
• These are used both for diagnosis and for programming support.
• Screwed instead of soldered
• No cables.
• This is perhaps the first thing that stands out on the new KOSMIK.
• To ensure that its enormous power can be optimally transferred, gold-plated copper links are provided on the KOSMIK.
• On it appropriate cables are screwed by cable lugs.
• The cable cross section can be adapted to the current requirement.
• This gland makes the exchange of cables uncomplicated and represents a reliable high-current connection.
• In addition to the supplied cable set, pre-assembled cables are available as accessories.
• Nothing is lost
• KOSMIK is the first KONTRONIK controller to record operating parameters internally.
• Speed, current, voltage, etc. are always available in the controller and can be recorded during the flight.
• The data is stored on a microSD card.
• The KOSMIK also offers the option to connect 3 external sensors (for example for altitude measurement).
• The KOSMIK can be connected directly to the PC via a fast MicroUSB connection.
• These data are also recorded during the flight.

Specifications:

• 5-14 S LiPo
• 20-59 V
• 160 A continuous current
• up to 320 A peak current
• BEC 7 A continuous current
• BEC 20A peak current
• 200 g without cable
• 337 g with cables
• Size 109,2x53,2x28,6 mm

Please note Kontronik produce on Order! we always want to have fresh esc, with latest FW. if you need it urgent contact before ordering to verify delivery time!

Kontronik KOSMIK 170 HV-I Speed controller for helicopters

Optimally protected in a plastic case, covered by two aluminum plates, the KOSMIK conceals its interior: continuous current up to 250 A and a voltage range up to 14 S. Also included are anti-spark and high part-load capability even at high power. So the KOSMIK can cope with all the requirements you can have for an ESC of superlatives.

Superheroes are the KONTRONIK controllers, which are even more powerful with the integrated telemetry function! From now on you can recognize our controllers with telemetry by the abbreviation „HV-I“.

The KOSMIK‘s new cooling concept with two aluminum plates and optional heat sinks allows operation at extremely high continuous current.

    With integrated telemetry
    Telemetry protocol for Futaba, Jeti, Multiplex, Mikado, Graupner

Specifications:

•  5-14 S LiPo
•  20-59 V
•  170 A continuous current
•  BEC 10 A continuous curren
•  BEC 30 A peak current
•  200 g without cable
•  337 g with cable
•  Size 109,2x53,2x28,6 mm

Please note Kontronik produce on Order! we always want to have fresh esc, with latest FW. if you need it urgent contact before ordering to verify delivery time!

is is the Kontronik Kosmik 200 HV Brushless ESC. The KOSMIK delivers incredible power for ambitious pilots with the KONTRONIK reliability you have come to trust. With the ability to deliver 200A of continuous current with 5S to 14S LiPo setups, the KOSMIK can easily push any high power model into motion. With its integrated and adjustable BEC, the KOSMIK even supports HV servos! Different modes for sailplanes, airplanes, helicopters, boats and RC cars (including forward and reverse drive) make the KOSMIK flexible for a variety of applications. Two helicopter modes include a fixed RPM function, as well as a spool up optimized for scale helicopters and tailor made motor and battery cables as well as one BEC cable round out the package. The continuous current is setup for a maximum battery capacity of 10,000mAh, and optional special KOSMIK heat sinks are available to help guarantee the maximum power and reliability of this ESC.
BEC: The strongest BEC KONTRONIK has ever developed. With a voltage from 5V up to 8V and a current capacity of 7A continuous and up to 20A peak the KOSMIK is the ESC for the most demanding tasks. Two BEC ports allow for using full current when using the second BEC cable.Screwed instead of soldered: No wires. This is the first thing you notice looking at the KOSMIK. In order to handle the enormous power, the KOSMIK is provided with gold tabs instead of the familiar soldered cables. Before usage cables and tabs are connected via screws and cable shoes. This concept makes exchanging cables easy and provides a reliable high current connection.Data interfaces: In addition to three connectors for sensors and telemetry, the KOSMIK features a micro USB port to quickly deliver and process operation data.
Mode-Programming: The well-known and proven KONTRONIK Mode-Programming is also implemented in the KOSMIK. The ESC is can be customized for different applications in a short amount of time.PROGDISC Compatible: The KOSMIK can be parameterized using the KONTRONIK PROGDISC. This allows the user to change individual parameters and helps to adjust the KOSMIK to your personal preferences.
Online Updatable: The KOSMIK can be updated online. This allows software updates to be done easily at home. Long downtimes caused by sending and waiting are a thing of the past.LED: Equipped with two bi-colored LEDs the KOSMIK offers a wide range of signal outputs. These can be used for both diagnostic purposes, as well as for programming support.Logger: The KOSMIK offers the ability to record operating parameters internally. Internal recording delivers more detailed data than an external system could ever supply. With the high recording capacity and speed KONTRONIK delivers state-of-the-art technology.MicroSD Card: All recorded data is written on a MicroSD card. This enables a flexible analysis of data.

Features:

•   BEC short circuit protection
•   Auto Programming Mode
•   Stick positions programmable
•   Mode programming
•   PROGDISC ability
•   Online update ability (OUF)
•   RPM control
•   Autorotation mode
•   EMF brake can be adjusted*
•   Proportional brake
•   Short circuit protection
•   False start protection
•   Polarity protection
•   Current limiting
•   Over temperature protection
•   Under voltage cutoff
•   Can be disabled
•   with automatic adjustment for cell count: Li-Ion / LiPo / NiCd / NiMh /LiFePo
•   Variable cutoff voltage per cell *
•   Slow down instead of cutoff *
•   Active freewheeling circuit
•   LED status display
•   Overload alarm
•   Reversible rotation direction
•   Data logging
•   Anti spark
•   USB port

Specifications:

• Cell count (LiPo): 5-14
• Operating voltage [V]: 20-58
• Continuous current [A]: 200
• Maximum RPM with 2-pole-motor: 250,000
• Size [mm] (without capacitor): 90x54x29
• Weight [g] without cables: 200
• BEC current continuous [A]: 7
• BEC current maximum [A]: 20
• BEC voltage adjustable [V]: 5-8
• PWM frequency [kHz]: 8-32
• Sensor ports: 3

Please note Kontronik produce on Order! we always want to have fresh esc, with latest FW. if you need it urgent contact before ordering to verify delivery time!

Kontronik KOSMIK 210 HV-I speed controller for helicopters

    With integrated telemetry
    Telemetry protocol for Futaba, Jeti, Multiplex, Mikado, Graupner

Specifications:

•     5-14 S LiPo
•     20-59 V
•     210 A continuous current
•     BEC 10 A continuous current
•     BEC 30 A peak current
•     200 g without cable
•     337 g with cable
•     Size 109,2 x 53,2 x 38,6 mm

 

The ProgUNIT will enthuse you with its intuitive easy-to-use comfort.

With the separate and free Software K-KONFIG (for Windows PC) programming of your ESC cannot be easier. No endless long manuals, no sound series, no clicking through. Quick and easy you find the parameter you're looking for and can adjust it according to your needs.

On all online updatable ESC a software update can be implemented with the ProgUNIT. This means, all online updatable ESC (KOBY, Kolibri, JIVE Pro, KOSMIK and others) can be updated with the ProgUNIT instead of sending them to us anymore.

Please refer to the respective manual whether or not your ESC is online updateable. Of course, also the ProgUNIT itself can be updated over a direct internet connection to KONTRONIK web site.

Communicator App

The KONTRONIK Communicator App will allow you to wirelessly program your  KOSMIK via your phone or tablet. In addition  to programming, the Communicator App will allow you view live stream data from your KOSMIK as long as you remain in  Bluetooth range.

The Bluetooth module is available, and  must be used if you wish to create a wireless  connection with the KOSMIK.

KONTRONIK now offers a KOSMIK Bluetooth Module. This allows the KOSMIK to communicate with your smart phone or tablet computer.

Optional part for GVR-7020 Gryphon Extreme-Heli Voltage Regulator. Plugs into the AUX position on the regulator.

Red LED's illuminate when a low-voltage condition is met. Low-voltage condition is user-selectable for LiFe or LiPo at the Voltage Regulator.

Scorpion BEC-RPM cable set For Tribunus 06-80A ESC

These ESC/ BEC cables are specifically made for all Tribunus ESC use, (except Tribunus 06-80A ESC SBEC.) They are 90/0.08 wires in AWG 24 cable that provide a low resistance benefit, preventing voltage drop over the long length of the cable.

With an additional 140mm longer length over the stock cables (410mm), you can use the 550mm length ESC / BEC Cables to wire you large 700/ 800 size helicopter (like SAB Kraken) or Giant Scale Airplanes.

Gauge : 24AWG
Wire OD: 1.25
Length: 550mm
Pull Force: 10.5kg
Resistance: 25.7m.Ohm
Wire Flash Plated: Tinned Copper wire
Number of wire cores: 90/0.08mm
Cover Plastic: Soft PE

Scorpion cable set For all Tribunus ESC use Except 06-80A

Included:

Connection cable 410mm *2
Diode cable *1

Scorpion Diode Cables for Tribunus use only, set of 2

Included in the Box

Diode Cables *2

Scorpion Hi-Speed Cooling Fan 30mm comes with the size 30 x 30 x 10mm that is suitable to Tribunus 06-80,Tribunus II 06-120, Tribunus II 12-80 and Tribunus II 12-130A ESC.

Aluminum case indeed is more durable but it could also use as a heat-sink and with the high speed fan it can increase the cooling efficiency of the cooling system.

Useful accessory to reduces ESC or Motor temperatures!

2-pin receiver connector plug for fast and easy connection!

Aluminum black color case with golden highlight to create a clean and strong look!

Length : 30mm (1.18")

Width : 30mm (1.18")

Thickness : 10.6mm (0.42")

Weight : 15.5g

Fan Speed 8.4V : 28000 RPM

Scorpion Hi-Speed Cooling Fan 30mm can deliver excellent cooling power for your ESC and Motor during heated competition or battle.

It increase air flow and help extend the life on your ESC and Motor.

Specifications:

Length: 1.2" (30mm)

Width: 1.2" (30mm)

Thickness: 0.29" (7.5mm)

Fan Speed: 13000 RPM

Since our Tribunus 14-200A ESC released, a lot of pilots asked where to get the 40mm cooling fan for it. We heard that voice so we produce a very powerful cooling fan for the ESC Tribunus I/II 14-200A/14-300A. Scorpion Hi-Speed Cooling Fan (40mm) is built by Aluminum alloy and it can deliver excellent cooling power for your ESC. It increases air flow to help extend the lifespan of your ESC. It is suitable for Tribunus14-200A, II 14-200A & 14-300A ESC.

Specifications

• Length : 40mm (1.57")
• Width : 40mm (1.57")
• Thickness : 10.6mm (0.42")
• Weight : 22g
• Fan Speed 8.4V : 15000 RPM

The Tribunus II 12-130A has proven to be one of our most versatile and capable ESCs. Bridging the gap between medium to large size HV models it is a perfect mix of lightweight and economic, yet very capable. When looking at ways to improve this product from previous versions, the list of possibilities was very short, it was nearly perfect before. However, we have improved the PCB components and tuned the firmware to make the capacity measurement even more precise. Then we have added a 30mm cooling fan (which connects easily to your RX / Gyro system) and improved the case design to help direct the generated air towards the heat sensitive components. Cooler temperature increase the life span, and lower the chance of failures in the long run!

Airplane and Heli mode,

Stored and unstored Governor, external governor.

Data Logging, Data output port for external data logging device, such as Mikado V control / Vbar combinations. Jeti Telemetry , JLog 3 and Futaba.

ESC setup can be set by Mikado V control Radio.

PC connectivity with USB micro cable (not included), Android connectivity ( OTG cable needed) , V link II Cable, plus Diode adaptor cable sold separately for optional use

Max Continuous Current | 130 Amps
Peak Current | 200 Amps
Operating Voltage Range | 14-52 Volts
BEC Output voltage: | 5.1V to 8.1V adjustable.
Max Continuous BEC Output | 10 Amps @ 8.1 V
Peak BEC Output | 30 Amps/1s @ 8.1 V
On Resistance | 0.7  mOhms *2
Size | 75.3 x 44.3 x 26.3 mm
Size with fan | 75.3 x 44.3 x 38.5 mm
Fan Input voltage: 5-8.1v
Weight (Without Connectors) | 198 g (6.98 oz)
Drive frequency | 8kHz - 32kHz

The Return of the Tribunus 06-80A – New and Improved!

Airplane and Heli mode,

• Stored and unstored Governor, external governor.
• Data Logging, Data output port for external data logging device, such as Mikado V control / Vbar combinations. Jeti Telemetry , JLog 3 ( more compatible device will be added gradually like Futaba..etc.)
• ESC setup can be set by Mikado V control Radio.
• PC connectivity, Android connectivity ( OTG cable needed) , V link II Cable(optional) plus Diode adaptor(included) cable needed.
• Supported HvLi battery 12S total 52V.
• Size: 76.7 x 36.5 x 25.4 mm
• Weight: 144 Grams.

To name a few extraordinary new features, it has :

• Enhanced case and PCB design for better heat dissipation and efficiency
• Newly added USB port for PC connection with/ without a main power source
• Improved BEC Protection
• Futaba telemetry support without additional adaptor
• Android apps supported to allow you to configure or update the ESC via USB port without main power source
• Other equally exceptional new features are :
• Improved BEC current and voltage drop for high amps servos. 0.8v drop on 30a
• Added gear ratio and motor poles settings for Jeti and Futaba telemetry
• Increased log size to 64kB
• Optimized current protection
• More PC motor control function

Specifications

Max Continuous Current: 80 Amps
Peak Current: 100 Amps
Operating Voltage Range:14-52 Volts
BEC Output voltage: 5.1V to 8.1V adjustable.
Max Continuous BEC Output :10 Amps @ 8.1 V
Peak BEC Output :30 Amps/1s @ 8.1 V
On Resistance:0.4 mOhms *2
Size :76.7 x 36.5 x 25.4 mm (3.02 x 1.44 x 1 in)
Weight (Without Connectors):144g (5.08 oz)
Drive frequency:8kHz - 32kHz

Airplane and Heli mode,

Stored and unstored Governor, external governor.

Data Logging, Data output port for external data logging device, such as Mikado V control / Vbar combinations. Jeti Telemetry , JLog 3.

ESC setup can be set by Mikado V control Radio.

PC connectivity, Android connectivity ( OTG cable needed) , V link II Cable(optional) plus Diode adapter(included) cable needed.

Supported HvLi battery 14S total 61V **.

Size: 90.7mm x 50mm x 31.9mm

Weight: 238 Grams.

**Using up to16s HV Lipo will not void the warranty.

Specifications

• Max Continuous Current 300 Amps
• Peak Current 400Amps
• Operating Voltage Range 14-61 Volts **
• BEC Output voltage: 5.1V to 8.3V adjustable.
• Max Continuous BEC Output 10 Amps @ 8.3 V
• Peak BEC Output 30 Amps/1s @ 8.3 V
• On Resistance 0.65 mOhms *2
• Size 90.7mm x 50mm x 31.9mm (3.57 x 1.97 x 1.26 in)
• Weight (Without Connectors) 244g (8.61 oz)
• Drive frequency 8kHz - 32kHz

- Improved Cooling and Capability- Enclosed capacitors- Ultra Strong 5V-12V BEC - Integrated Mounting Tabs- Temperature Controller Fan PortThe new Scorpion Tribunus II+ 14-220A ESC SBEC has the feature same as others new Tribunus II ESCs – integrated USB port, telemetry support for Vbar, JETI and Futaba. The BEC level is going to be the same as the Tribunus II 14-300A ESC so it can handle most of the high-torque servos and high servo loading with ease.

• Newly added USB port for PC connection with/without a main power source Improved BEC Protection
• Improved Cooling and Capability
• Enclosed capacitors
• Ultra Strong 5V-12V BEC
• Integrated Mounting Tabs
• Temperature Controller Fan Port

Airplane and Heli mode.

Stored and unstored Governor, external governor.

Data Logging, Data output port for external data logging device, such as Mikado V control / Vbar combinations. Jeti Telemetry, JLog 3 (more compatible device will be added gradually like Futaba..etc.)

ESC setup can be set by Mikado V control Radio.

PC connectivity, Android connectivity (OTG cable needed), V link II Cable (optional) plus Diode adaptor (included) cable needed.

Supported HvLi battery 14S total 61V.

Specifications:

Max Continuous Current* | 220 Amps
Peak Current | 300 Amps
Operating Voltage Range | 13-61 Volts
BEC Output voltage: | OFF / 5.1V to 12.1V adjustable
Max Continuous BEC Output | 15 Amps @ 8.1 V
Peak BEC Output | 30 Amps/1s @ 8.1 V
On Resistance | 0.55mOhms*2
ESC Body Size | 46.1 x 80.7 x 32.3 mm (1.81 x 3.17 x 1.27 in)
Mounting Tab Dimensions | 26.0 x 89.0mm ( 1.02 x 3.50 in) / M3 Bolt
Weight (without wires) | 194g ( 6.84oz)
Weight (With wires) |294g ( 10.37oz)
Drive frequency | 8kHz - 32kHz

*Max Continuous Current is the rating at 100% throttle for 60 seconds with 35m/s of airflow

Included in the Box:

1 x Tribunus III ESC
2 x BEC Cables (410mm)
1 x Mounting Hardware Pack
1 x BEC Voltage Stabilizing Capacitor

The new Scorpion Tribunus II+ 14-200A ESC SBEC has the feature same as others new Tribunus II ESCs – integrated USB port, telemetry support for Vbar, JETI and Futaba. The BEC level is going to be the same as the Tribunus II 14-300A ESC so it can handle most of the high-torque servos and high servo loading with ease.

• Newly added USB port for PC connection with/without a main power source Improved BEC Protection
• Futaba telemetry support without additional adapter
• Android apps supported to allow you to configure or update the ESC via USB port without main power source
•  Log file is available to download through Android apps
• Improved Bec current and Voltage drop for High amps servos (0.8v/20amp)
  

Airplane and Heli mode.

Stored and unstored Governor, external governor.

Data Logging, Data output port for external data logging device, such as Mikado V control / Vbar combinations. Jeti Telemetry, JLog 3 (more compatible device will be added gradually like Futaba..etc.)

ESC setup can be set by Mikado V control Radio.

PC connectivity, Android connectivity (OTG cable needed), V link II Cable (optional) plus Diode adaptor (included) cable needed.

Supported HvLi battery 14S total 61V.

Size: 83.4 x 45 x 27.6 mm

Weight: 218 Grams.

Specifications:

• Max Continuous Current     200 Amps
• Peak Current     250Amps
• Operating Voltage Range     14-61 Volts
• BEC Output voltage:     5.1V to 8.3V adjustable.
• Max Continuous BEC Output     10 Amps @ 8.3 V
• Peak BEC Output     20 Amps/1s @ 8.3 V
• On Resistance     055 mOhms *2
• Size     83.4 x 45 x 27.6 mm (3.28 x 1.77 x 1.08 in)

Included in the Box:

• Diode adaptor cable *1
• Connection cable *2

Weight

• 218GR

Scorpion TRIBUNUS III 06-110Amp (SBEC) Brushless speed controller for Helicopters, Airplane

So what is new about this ESC? All new PCB and Case design which takes performance and functionality to the next level.

Improved heat Dissipation-Cooler operation and longer product life
Integrated mounting Tabs- easy Mounting
Enclosed capacitors- MORE DURABILITY
2 TONE anodizing- make it looks bling good

The programmable build in Bec can provide 10Amps continuous and 20Amps peak to provide constant power to your board systems with Voltage levels of 5-12V

Temperature controlled Fan port
Included cooling fan activates when temperature rises and deactivated when it falls, to reduce operational temperature in use without unwanted noise.

Real time telemetry and Full data Logging supporting protocols such:

Mikado Vbar
Futaba Sbus
Jeti EX bus
Other systems- with unsolicited protocols

usb-C PROGRAMMING port, via Proto

Helicopter mode and Airplane mode, to be more dedicated to the right model
Internal governor- RPM control
external governor- integration with Vbar, futaba, others

for Airplanes- Throttle acceleration and top end power
Break settings

Specifications

Max Continuous Current 110 Amps

Peak Current 150 Amps

Operating Voltage Range 11-26.1 Volts

BEC Output voltage: 5.1V to 12.1V adjustable

Max Continuous BEC Output 10 Amps @ 8.1 V

Peak BEC Output 20 Amps/1s @ 8.1 V

On Resistance 0.45mohms * 2

ESC Body Size 32.0 x 52.5 x 23.1 mm (1.26 x 2.07 x 0.91 in)

Mounting Tab Dimensions 16.0 (Battery Side) / 24.0mm (Phase side) x 58.0mm ( 0.63 / 0.94 x 2.28 in) / M2.5 Bolt

Weight (Without Connectors) 105g ( 3.70oz)

Drive frequency 8kHz - 32kHz

Included in the Box

1 x Tribunus III ESC

1 x 30mm Cooling Fan

2 x BEC Cables

Scorpion TRIBUNUS III 06-160Amp (SBEC) Brushless speed controller for Helicopters, Airplane

So what is new about this ESC? All new PCB and Case design which takes performance and functionality to the next level.

Improved heat Dissipation-Cooler operation and longer product life
Integrated mounting Tabs- easy Mounting
Enclosed capacitors- MORE DURABILITY
2 TONE anodizing- make it looks bling good

The programmable build in Bec can provide 10Amps continuous and 20Amps peak to provide constant power to your board systems with Voltage levels of 5-12V

Temperature controlled Fan port
Included cooling fan activates when temperature rises and deactivated when it falls, to reduce operational temperature in use without unwanted noise.

Real time telemetry and Full data Logging supporting protocols such:

Mikado Vbar
Futaba Sbus
Jeti EX bus
Other systems- with unsolicited protocols

usb-C PROGRAMMING port, via Proto

Helicopter mode and Airplane mode, to be more dedicated to the right model
Internal governor- RPM control
external governor- integration with Vbar, futaba, others

for Airplanes- Throttle acceleration and top end power Break settings
 
Specifications

Max Continuous Current 160 Amps

Peak Current 200 Amps

Operating Voltage Range 11-26.1 Volts

BEC Output voltage: 5.1V to 12.1V adjustable

Max Continuous BEC Output 15 Amps @ 8.1 V

Peak BEC Output 30 Amps/1s @ 8.1 V

On Resistance 0.37mOhms * 2

ESC Body Size 36.5 x 75.0 x 27.0 mm (1.44 x 2.95 x 1.06 in)

Mounting Tab Dimensions 24.0 x 84.0mm ( 0.944 x 3.30 in) / M3 Bolt

Weight (Without Connectors) 155g ( 5.47oz)

Drive frequency 8kHz - 32kHz

Included in the Box

1 x Tribunus III ESC

1 x 30mm Cooling Fan

2 x BEC Cables

1 x Mounting Hardware Pack

The Return of the Tribunus  III 06-80A – New and Improved!

Specifications

Max Continuous Current 80 Amps
Peak Current 110 Amps
Operating Voltage Range 11-26.1 Volts
BEC Output voltage: 5.1V to 12.1V adjustable
Max Continuous BEC Output 8 Amps @ 8.1 V
Peak BEC Output 12 Amps/1s @ 8.1 V
On Resistance 0.45mohms * 2
ESC Body Size 32.0 x 52.2 x 20.3 mm (1.26 x 2.07 x 0.79 in)
Mounting Tab Dimensions 16.0 (Battery Side) / 24.0mm (Phase side) x 58.0mm ( 0.63 / 0.94 x 2.28 in) / M2.5 Bolt
Weight (Without Connectors) 70.0g ( 2.47oz)
Drive frequency 8kHz - 32kHz
Included in the Box

1 x Tribunus III ESC
1 x 30mm Cooling Fan
2 x BEC Cables
1 x Mounting Hardware Pack

Scorpion V Link II Cable

With the new V Link II cable (Optional) supported by Windows XP, Windows 7,8 and 10, you can always keep your ESC updated with the latest firmware, and make changes to your settings with ease!
The newly updated programming software has been hugely improved upon, and makes setup and tuning easier than ever.

Included in the Box

• 1* Scorpion V Link II Cable

T-Motor's Alpha 60A ESC is perfect for professional applications. Large UAVs demand reliable components and the Alpha has numerous levels of protection to keep your gear safe.

4-6S vector control ESC with enclosed and light-weight design

Specifications

•     Size: 71.3x32.5x15.9mm
•     Weight (Incl. Cable): 62.8g
•     Motor Cable: Silicone wire-deep orange- 16AWG-70MMx3Pcs
•     Power Cable: Silicone wire-red/black-14AWG-175MM
•     Signal Cable: PVC flat cable- 30 core wires-- 2-355MM (white, blank, black/JP 3P male connector)
•     Upgrade Cable: PVC flat cable-30 core wires--3-50MM (black, red, white/JP 3P male connector)
•     Support Voltage: 6S/18-25.2V
•     Cont. Current: 40A
•     Peak Current (10s): 60A
•     Standby Consumption: <= 50mA
•     BEC: No
•     Throttle Pos. Range: 110-1900μs
•     Throttle Refresh Frequency: 500Hz
•     Throttle Response Speed: 50ms

 

T-motor Speed controller T40PRO -400Hz, electronic speed controller 40a, pro version, latest Fets

T-series pro ESC has the best performance, it is the super-class product for RC airplane and helicopter and multiroto-copter.

Features :
2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transferred through optical/electrical coupled system to avoid electromagnetic interference.2.6 Perfect governor mode for Multiro-copter.2.7 Wide-opened heat-sink has the best heat dissipation effect.2.8 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.9 User programmable. 2.10 Multiple program methods supported: transmitter stick, Digital LED Program Card, Multifunction LCD Program Box, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

Specification:

• Output:  Continuous 40A, burst 60A up to 10 seconds.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiMH battery.
• Refresh rate of the throttle signal: 50Hz to 432Hz.
• Control Signal Transmission: Optical/electrical coupled system.
• Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.      (BLM = BrushLess Motor)
• Size:  59mm (L) * 27mm (W) * 12mm (H).7. Weight:  29g.

 

T-motor Speed controller T40PRO -400Hz, electronic speed controller 40a, pro version, latest Fets

T-series pro ESC has the best performance, it is the super-class product for RC airplane and helicopter and multiroto-copter.

Features :
2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transferred through optical/electrical coupled system to avoid electromagnetic interference.2.6 Perfect governor mode for Multiro-copter.2.7 Wide-opened heat-sink has the best heat dissipation effect.2.8 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.9 User programmable. 2.10 Multiple program methods supported: transmitter stick, Digital LED Program Card, Multifunction LCD Program Box, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

Specification:

• Output:  Continuous 40A, burst 60A up to 10 seconds.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiMH battery.
• Refresh rate of the throttle signal: 50Hz to 432Hz.
• Control Signal Transmission: Optical/electrical coupled system.
• Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.      (BLM = BrushLess Motor)
• Size:  59mm (L) * 27mm (W) * 12mm (H).7. Weight:  29g.

 

T-motor Speed controller T60  ESC60A  400Hz.

• Output:  Continuous 60A, Burst 80A up to 10 Secs.
• Input Voltage:  2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.  
• BEC:  Pentium-60A: 3A / 5V (Switch mode).
• Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
• Size:  70mm (L) * 31mm (W) * 14mm (H).
• Weight:  60g.

Features:

• Extreme low output resistance, super current endurance.
• Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
• 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters.
• Throttle range can be configured and is fully compatible with all transmitters currently available on market.
• Smooth, linear and precise throttle response.

 

YGE 205 HVT ESC Version 2 - Superb governor, outstanding BEC and FULL Vbar integration! Black Edition

Own YGE protocol for further telemetry connections via e.g. S32 (new jlog of R² prototyping). Further protocols are in preparation.

Due to the optional USB adapter, the 200HVT can be varied and new updates can be added. During operation, the PWM frequency is always automatically adjusted to the needs of the engine and is thus always optimal. Due to the new sine start-up of the 200HVT, the startup behavior is now also SUPERSANFT.

Description:

• The specified current is the maximum continuous full gas flow with good cooling.
• 4 to 14S LiPo, undervoltage reset or shutdown.
• BEC - undervoltage detection can be switched off.
• current limit
• Undervoltage detection can be switched off
• Speed ​​control (governor mode).
• Soft start.
• Active freewheel, thus unlimited part-load.
• Automatic timing, or adjustable in 6 levels.
• EMK brake adjustable.
• F3A / Acro brake (brake intensity steplessly adjustable in flight).
• Min and Max values ​​are logged and can be displayed in the optional PC tool after the flight (for example, power)
• Speed ​​limit: 240,000 rpm (2-pole)
• Overtemperature / overload warning
• Anti-glare: reduces the start-up spark.
• Basic programming via mode setup.

Fine adjustment and choice of telemetry protocol via PC setup, suitable USB adapter is optionally available.

Technical data:

• Manufacturer / Importer     YGE
• Number of cells LiPo  6-14 S
• Max. permanent current [A]     205
• Opto coupler  YES
• Brake   YES
• RPM limit     240.000 rpm (2-Poler)
• Heli mode (gov mode) : YES
• Anti spark   YES
• Programmable   YES
• Dimensions approx. [mm]     89 x 52 x 28
• Weight [g]     189

YGE 205 HVT ESC Version 2 - Superb governor, outstanding BEC and FULL Vbar integration! Black Edition

New Features:

• - improved case-design with optimized cooling
• - 1,5mm narrower
• - The mounting holes are now compatible to common helicopters (distance between holes 43mm)
• - dimensions: 84 x 54,5 x 33mm
• - weight with cables: 287g

"T" for Telemetry

Supported telemetry-protocols:

• - Graupner HoTT V4
• - Jeti ExBUS
• - Multiplex Sensor BUS V2
• - MSH Brain 2
• - Spirit FBL
• - Mikado Vbar Control
• - YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky)

All usual information as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characterization depends on your transmitter/receiver.

Technical specifications:

• BEC 5.0V – 8.4V
• BEC 12A continuous, 30A Peak
• “T” for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2 or Spirit FBL
• Update capable (optional USB-Adapter available)
• entirely overhauled hard- and software (32-bit)
• the PWM-frequency will be set automatically to the requirements of the motor
• The specified current is the maximum continuous full power current
• 6 to 14s LiPo, incl under voltage protection by power reduction
• Current limiting
• Disconnectable under voltage detection
• Electronic speed control (Governor- mode)
• Soft start
• super soft startup for scale-helicopters possible (60 sec.)
• Active free-wheel, allowing unlimited part load operation
• Automatic or 6 step adjustable timing
• Adjustable EMK brake
• F3A(Acro brake (brake force control infinitely adjustable)
• Frequency: 16 to 32 kHz
• Speed limit: 240.000 rpm (2- Poles)
• Temperature and overload warning
• Anti- flash: decreases the closing spark
• Basic -Programming with mode programming
• Fine adjustment and selection of telemetry log with the PC Setup
• Suitable USB-adapter optionally available
• dimensions (mm): 84 x 54,5 x 33mm
• weight without/with cables: 219g/287g

YGE 205HVT ESC Cable Set. This is a replacement cable set for the 205HVT. Package includes two BEC cables, one throttle cable, and one telemetry cable.

YGE 255 OPTO High voltage Brushless Speed controller 255A continuous / 400A peak 16S,

• integrated antispark

Technical data:

- Continuous current 255A (Full throttle, good cooling conditions). Max. peak current 400A.
- Adjustable current limit up to 400A. The ESC won’t shut down, it will limit the current to 400A.
- 6 to 16s LiPo, max. terminal voltage 68V, nominal operating voltage 63V.
- over 14S all-insulated and touch-proof connectors must be used.
- pluggable receiver- and telemetry cables
- All signals are isolated by opto couplers for best noise immunity.
- Electronic speed control (Governor- mode)
- Soft start
- Active free-wheel, allowing unlimited part load operation.
- Automatic or 6 step adjustable timing
- Frequency: Automatic.
- Adjustable EMK brake
- F3A(Acro brake (brake force control infinitely adjustable)
- Speed limit: 240.000 rpm (2- Poles)
- Temperature and overload warning
- Anti- flash: decreases the closing spark.
- Basic -Programming with mode programming
- Fine adjustment and selection of telemetry with the PC Setup. Suitable USB-adapter optionally available
- Dimensions in mm: 105 x 54 x 32
- Weight with all cables: 343g
- Cable diameter battery / motor: 8² / 8²

Young Generation Electronics, Regler with Telemetry, 2-6 Lipo, 65A permanent, BEC 8A / 5,5 - 9V, Modus-setup, (Governor-Mode)

"T" for Telemetry

Supported telemetry-protocols:

- Graupner HoTT V4
- Jeti ExBUS
- Multiplex Sensor BUS V2
- Mikado Vbar Control
- MSH Brain 2
- Spirit FBL
- YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky)

All usual information as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characteristic depends on your transmitter/receiver.

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM- frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 9V

- high BEC -current rating: 8A permanent / 18A peak

- dimensions in mm: 64x26x9

- weight with / without cables: 30-45g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

Young Generation Electronics, Regler with Telemetry, 2-6 Lipo, 95A permanent, BEC 8A / 5,5 - 9V, Modus-setup, (Governor-Mode)

"T" for Telemetry

Supported telemetry-protocols:

- Graupner HoTT V4
- Jeti ExBUS
- Multiplex Sensor BUS V2
- Mikado Vbar Control
- MSH Brain 2
- Spirit FBL
- YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky)

All usual information as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characteristic depends on your transmitter/receiver.

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM- frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 9V

- high BEC -current rating: 8A permanent / 18A peak

- dimensions in mm: 78 x 32 x 15

- weight with / without cables: 78g / 93g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

Young Generation Electronics, ESC with Telemetry, 6-12 Lipo, 105A permanent, BEC 12A / 5,0 - 8,4V, Modus-setup, (Governor-Mode)

A new smaller HV-ESC, the Aureus 105.
It is suitable for 550-600 size helicopters with 12s Lipo, and planes with 10-12s setups. The Aureus 105 has full telemetry compatibility with almost all systems on the market, an adjustable high power BEC and our popular current-limiter, whereby the ESC won’t shutdown, it just limits the current.

Supported telemetry-protocols:

- Graupner HoTT V4
- Jeti ExBUS
- Multiplex Sensor BUS V2
- Mikado Vbar Control
- YGE-Protocol for more telemetry-connections for exapmple via S32 (new Jlog)

All usual informations as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characterisation depends on your transmitter/receiver.

6 to 12s LiPo, incl under voltage protection by power reduction
BEC 5,0V – 8,4V
BEC 10A continuous, 25A Peak
“T” for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2 or Spirit FBL

Update capable (optional USB-Adapter available)

entirely overhauled hard- and software (32-bit)
the PWM-frequency will be set automatically to the requirements of the motor
The specified current is the maximum continuous full power current
Current limiting
Disconnectable under voltage detection
Electronic speed control (Governor- mode)
Soft start
super soft startup for scale-helicopters possible (60 sec.)
Active free-wheel, allowing unlimited part load operation
Automatic or 6 step adjustable timing
Adjustable EMK brake
F3A(Acro brake (brake force control infinitely adjustable)
Frequency: 16 to 32 kHz
Speed limit: 240.000 rpm (2- Poles)
Temperature and overload warning
Anti- flash: decreases the closing spark
Basic -Programming with mode programming
Fine adjustment and selection of telemetry log with the PC Setup
Suitable USB-adapter optionally available
dimensions (mm): 08,5×34,5×19,5
weight without/with cables: 80g/124g:
Content:
- YGE Aureus 105
- RC-Connection Cable
- Fan
- Sticker
- Manual

YGE Aureus 135 Brushless ESC 135A 6-12S with Telemetry and BEC

Properties:

 "T" for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL

• Update capable (optional USB-Adapter available)
• entirely overhauled hard- and software (32-bit)
• the PWM-frequency will be set automatically to the requirements of the motor
• The specified current is the maximum continuous full power current
• 6 to 12s LiPo, incl under voltage protection by power reduction
• Current limiting
• Disconnectable under voltage detection
• Electronic speed control (Governor- mode)
• Soft start
• super soft startup for scale-helicopters possible (60 sec.)
• Active free-wheel, allowing unlimited part load operation
• Automatic or 6 step adjustable timing
• Adjustable EMK brake
• F3A(Acro brake (brake force control infinitely adjustable)
• Frequency: 16 to 32 kHz
• Speed limit: 240.000 rpm (2- Poles)
• Temperature and overload warning
• Anti- flash: decreases the closing spark
• Basic -Programming with mode programming
• Fine adjustment and selection of telemetry log with the PC Setup
• Suitable USB-adapter optionally available
• dimensions (mm): 82 x 43,5 x 26
• weight without/with cables: 122g/178g

YGE 135 HVT ESC Black Edition - Superb governor, outstanding BEC and FULL Vbar integration!

• BEC 5,0V - 8,4V
• BEC 10A continuous, 25A Peak
• "T" for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL
• Update capable (optional USB-Adapter available)
• entirely overhauled hard- and software (32-bit)
• the PWM-frequency will be set automatically to the requirements of the motor
• The specified current is the maximum continuous full power current
• 6 to 12s LiPo, incl under voltage protection by power reduction
• Current limiting
• Disconnectable under voltage detection
• Electronic speed control (Governor- mode)
• Soft start
• super soft startup for scale-helicopters possible (60 sec.)
• Active free-wheel, allowing unlimited part load operation
• Automatic or 6 step adjustable timing
• Adjustable EMK brake
• F3A(Acro brake (brake force control infinitely adjustable)
• Frequency: 16 to 32 kHz
• Speed limit: 240.000 rpm (2- Poles)
• Temperature and overload warning
• Anti- flash: decreases the closing spark
• Basic -Programming with mode programming
• Fine adjustment and selection of telemetry log with the PC Setup
• Suitable USB-adapter optionally available
• dimensions (mm): 82 x 43,5 x 26
• weight without/with cables: 122g/178g