Sky-Hero

Sky-Hero Little Spyder Carbon Cam plate

Sky-Hero Little Spyder Carbon Main Frame Lower

Sky-Hero Little Spyder Carbon Main Frame Upper

Sky-Hero Little Spyder Composite Canopy White Color.

Gelcoat canopy white color for Little spyder

Sky-Hero Little Spyder Fastener set

Sky-Hero Little Spyder HALF FRAME SPACER BLACK

Do not fit the normal Spy/Spyder series

Sky-Hero Little Spyder/ Little six LANDING GEAR SET

 Long Landing Kit for Sky hero.

Used with larger gimbals, allows more clearance towards the ground.

Sky-Hero MAIN FRAME SET OB1

SKH03-019-01 Main frame Spyder, 1 pcs

Sky Hero Motor & ESC Package

Designed for the entire Sky hero lineup, this motor & ESC package is an easy & effective way to outfit the Sky Hero kit of your choice. Optimized with SimonK firmware, the 40A OPTO ESC's utilize a high refresh rate for the ultimate & stability & precision, allowing your Sky Hero multi rotor to perform incredibly well.

Included:

• (2) Sky Hero 40A OPTO (No BEC) ESC's w/ SimonK Firmware (SKH04-003)

• (2) X2815-470 Sky Hero 470Kv Motor (SKH04-001)

SKH01-002-BK Sky-Hero New Frame spacer Black, fits Normal Little/Spyder-Spy-Spyder 6 MODELS.

SKH01-002-SK Frame spacer Smoke Green

SKH01-006-SK Sky-Hero New Landing gear holder Smoke Green Spy, Spyder

SKH01-008-SK  Landing T-nut BLACK color

SKH01-008-SK  Landing T-nut Smoke Green

Sky hero New Pancake motor frame ,Smoke green color

Reinforced, with better support for screws, fits up to 53mm pancake motors

Included 1 arm (half)

Sky hero New Pancake motor frame ,Black color

Reinforced, with better support for screws, fits up to 53mm pancake motors, fit 30mm tube

Included 1 arm (half)

This is a completely new Aluminium Spacer for Sky hero models.

replacing the plastic 30mm spacers, this Aluminum made spacers from 7075 and Anodized for long life lasting.

Spacer has nice cut offs allowing better cooling and possibility to locate hot components as ESCs nearby.

Direct replacement, More cooling, and all this with extra 3 grams of weight. 16 grams Aluminium weight compared to 13 grams standard plastic spacer.

Set of 1 spacers, Silver anodized

New VERSION Red Knurled thumb screw M4 for Inertic plate (10 pcs)

Sky-Hero OB1 COMBO 4" (Dia.175mm)

OB1 features:

Lighter
Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

Faster

The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

Stronger
The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

Others:

• The 15°>70° adjustable camera angle caters for different pilot profiles.
• The flexible ESC location (over or under arms) providing a tuned frame for every FPV

Racer's needs:

• Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
• Lipo 3 to 4S 1300mAh
• Camera 600TVL
• VTX 25mw

What's included?

• Cables protection Club Racer (4pc)
• Main frame set OB1
• Side frame OB1
• Front Arm OB1
• Rear Arm OB1
• Aluminium Spacers
• Screw Set OB1
• XNova Motor 2204-2600Kv x 4
• OneShot125 20A x 4
• Bullnose Props 3 blades 4x4.5x3
• CC3D Atom
• PDB: MPDB5V12V

Note that the canopy is not included!

 

Sky-Hero OB1 Nacked frame 4" (Dia.175mm)

OB1 features:

Lighter
Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

Faster

The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

Stronger
The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

Others:

• The 15°>70° adjustable camera angle caters for different pilot profiles.
• The flexible ESC location (over or under arms) providing a tuned frame for every FPV

Racer's needs:

• Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
• Motor 2204-2600 to 2700 kv
• ESC 20A (Littlebee or similar)
• Props 3 blades 4x4.5x3
• Lipo 3 to 4S 1300mAh
• CC3D Atom
• PDB: MPDB5V12V or PDB-LDO

What's included?

• Cables protection Club Racer (4pc)
• Main frame set OB1
• Side frame OB1
• Front Arm OB1
• Rear Arm OB1
• Aluminium Spacers
• Screw Set OB1

Note that the canopy is not included!

 

Comes in black + white inserts color.

Including in the set:

• 3 complete Motor arm sets (6 halves)
• T-nuts (2pcs)
• Spacers (3pcs)
• Inserts (3pcs)
• Landing gear holders (all in black reinforced color)

Transform any sky-hero to a new Pancake version, accept motors up to 53 mm.

Pancake conversion set Spyder (complete set smoke color injected parts, T-nuts, Inserts.

Pancake arms Comes in our Black color. Motors not included. T-spacers are white. Landing gear can be delivered in White, Green or Black color( your choice), if no comments- green color

Transform any sky-hero to a new Pancake version, accept motors up to 53 mm

Included:

8 x pcs of Pancake half arms- Black color
2 x Landing gear Holder, green or black or white (default green)
2 x Landing gear T holder- green or black or white (default green)
5 x Frame Spacers - green or black or white (default green)
4 x Arm T-Insert, White color

Colors may vary

Pancake Conversion set Spyder 6 (only motor frame)

Comes in Black Color

Including :

• 6 complete Motor arm sets( 12 halves).

Motor/ Hardware not included.
Transform any sky-hero to a new Pancake version, accept motors up to 53 mm.

Sky hero New Pancake motor frame ,Black color, Pack of 8, full 4 arms

Reinforced, with better support for screws, fits to motors from 46- 53mm pancake motors, fit 30mm tube

Pack of 8, full 4 arms

SKY-HERO PLASTIC RING ANAKIN

Sky hero Spyder 6, 100cm in diameter. 2 versions are available,  Normal 3536 motors or Pancake 4014 Motors combo.

Combo including the following :

1: Sky hero Spyder 6 frame set x 1

2: Motor Avizar X3-470 or Pancake 4014-330 x 6

3: ESC 40amp x6

4: Wire set  x 6

5: Propeller 14" ,15",16" depends on type of motor.

6: Distribution Board 100Amp

7: Hardware to mount the motors

 

Optional: you can choose Pancake or Normal motor version.

6 or 12 motors option available

 

Please note - canopy is not delivered with the combo and can be ordered separately.

To complete the combo you will need the Flight controller,Lipo battery, and radio.

Sky-Hero Quick Release Knob Spy and Spyder drones

1 pcs in set

Sky-Hero REAR ARM OB1 4"

Sky hero New Pancake motor frame ,Black color, saving package of 8 pcs, e.g 4 full arms

Reinforced, with better support for screws, fit 30mm tube. for normal motors up to 35-36mm

8 pcs, 4 full arms

Sky hero New, redesigned, and reinforced Motor frame Black color for motors 35mm

Better screw insert, More Fiber material, make this product stronger.
Included: 1 Half arm.

Sky hero New, redesigned, and reinforced Motor frame smoke-green color for motors 35mm

Better screw insert, More Fiber material, make this product stronger.
Included: 1 Half arm.

Sky-Hero SCREW SET OB1

Sky hero Spyder 6, 100cm in diameter. this is a Semi / professional machine,

• 1 Dual long landing gear, quick release, no tools needed.
• New Inertic design, integrated landing gear, optional upper lipo plate.
• 2 optional canopies : speed or heavy payload design.
• Foldable, 5 seconds, no tools.
• “Unlimited” payload.

Including: frame Kit with Fiber canopy (not painted)

New Innovative design Drones, Produced in Belgium. this machine is 600 mm wide, White canopy We are offering also Combos, depends on your Flying weight demand. mail us for Offer

• 2 mm carbon fiber main frame plates = stronger
• 30 mm carbon fiber booms = ESC inside
• Injected motor mounts = reliable
• Flight controller between the frame plates = protected
• Pre-drilled for 45*45 flight controller patterns = easy
• 28 mm to 36 mm motor size = choice is yours
• INERTiC camera mounts = no jelly
• 20 mm carbon fiber landing poles = stable
• Y6 shape = enjoy windy days

  Frame only, Electronics Not included