Sky-Hero

250-280 class FPV Motor Customized for SKY-HERO ANAKIN 280 and ANAKIN Club Racer

High-resistant Magnetic Steel Brushless motor Can use for battery 3S-4S

Choose CW or CCW

Sky hero Spy & Spyder Motor Mount, White color

Included- 1 half arm

New Innovative design Drones, Produced in Belgium. this machine is 900mm wide, white or carbon look canopy.

We are offering also Combos, depends on your Flying weight demand. mail us for Offer

•   2 mm carbon fiber main frame plates = stronger
•   30 mm carbon fiber booms = ESC inside
•   Injected Pancake motor mounts = reliable
•   Flight controller between the frame plates = protected
•   Pre-drilled for 45*45 flight controller patterns = easy
•   28 mm to 55 mm motor size = choice is yours
•   INERTiC camera mounts = no jelly
•   20 mm carbon fiber landing poles = stable
•   900 mm size
•   Y6 shape = enjoy windy days

Frame only, Electronics Not included

Sky Hero Spy Easy Access Lightened Main Frame

Sky Hero Spyder 6 Fastener Set

 

Sky Hero Spyder Canopy stand set

2 x posts (Color can vary per stock, Purple or Black)

3 x canopy rubber grommets

This is an upgrade ( electronics set) for Sky hero Spyder. (Frame is Not included)

• Combo available in 3 versions:
• Combo 4:  4 motors, 4 esc, 2 sets of CF props, Wire set
• Combo 5:  4 motors, 4 esc, 2 sets of CF props, Wire set, Pixhawk
• Combo 6:  4 motors, 4 esc, 2 sets of CF props, Wire set, Wookong M

 

Sky Hero Spyder Wiring Harness - X4 or X8/ Little spy/der

Sky Hero makes it easy when utilizing multiple motor applications with your Sky Hero kit, allowing up to (5) ESC's to be attached to this wire harness. No power distribution board is needed when utilizing this wire set, allowing multiple ESC's to be connected in quick fashion, without fuss.

Designed to be used with Sky Hero's line of ESC's, the Sky Hero ESC's feature pre soldered bullet connectors on the power terminal allowing the ESC's to be easily plugged into this wiring harness. Once the positive & negative wires of the ESC's are connected to this harness, you simply connect the motors to the ESC's, and you are finished.

This wire harness features bare leads on the battery terminal end (main positive & negative terminals), allowing use of a connector of your choice.

Includes:

• (1) Red-Positive Side Wire Harness with 3.5mm female connector soldered
• (1) Black- Negative Side Wire Harness with 3.5mm female connector soldered

Application:

• Sky Hero all models.

Sky hero Motor wedges set, Made from Aluminium T6, allow motors to be angles 10-20 Degrees.

Set of 4.

Sky Hero Spy / SPYDER6 Wiring Harness

Sky Hero makes it easy when utilizing multiple motor applications with your Sky Hero kit, allowing up to (7) ESC's to be attached to this wire harness. No power distribution board is needed when utilizing this wire set, allowing multiple ESC's to be connected in quick fashion, without fuss.

Designed to be used with Sky Hero's line of ESC's, the Sky Hero ESC's feature pre soldered bullet connectors on the power terminal allowing the ESC's to be easily plugged into this wiring harness. Once the positive & negative wires of the ESC's are connected to this harness, you simply connect the motors to the ESC's, and you are finished.

This wire harness features bare leads on the battery terminal end (main positive & negative terminals), allowing use of a connector of your choice.

Includes:

(1) Positive Side Wire Harness
(1) Negative Side Wire Harness

Application:

Sky Hero Spy or SPYDER6

Usage:

(1) Set Necessary for Spy Series / (2) Sets Necessary for SPYDER6

The Sky Hero Anakin FPV Racer Naked Frame is Sky-Hero's fastest aircraft and is the ideal FPV racer for pilots that prefer to build their own kit - and want more than just horizontally adjustable arms. Developed specifically for FPV racing, Anakin features a unique adjustable arm system that allows users to alter the flight characteristics of the aircraft for a flight experience that is dramatically different than anything you have flown in the pas

Arm Positions
High c.g. position (Front tube low + rear tube low)
High ground clearance
More agressive reactions
Better turn in
Neutral turn out
Low c.g. position (Front tube up + rear tube up)
More stable forward flight
Stable turn out
Slower turn in
Neutral C.G. position (Front tube down + rear tube up)
15° angle for mobius camera
+15° to FPV camera
Lower drag
Best overall racing setup
Highest speed
Most neutral reactions
Feels more locked in
Motor Angle: Optional side frames are required, not included.
0° = Neutral reaction, more drag, less speed
10° = Yaw efficiency decrease, less drag, more speed and flight time
Camera Angle:
10° = Flat vision, ideal to start and learn
20° = Perfect 2nd stage FPV experience

Needed to Complete:
(4) 2204 2300-2600kv motors
(4) 20A+ BLHeli ESCs (housed in the arms)
LEDs
FPV Camera
Flight controller
Receiver and Transmitter

 

Sky-hero Anakin Arm end front (4pc)

Sky-hero Anakin Arm end Rear 4pcs

Sky-hero Anakin Boom set 4 (280mm) including Plastic parts

Sky-hero Anakin Canopy

Anakin Club Racer & OB1 CABLES PROTECTION (4pc)

Sky-Hero Anakin Club Racer 215 - 5’’ NAKED FRAME kit only

The Kit version of the small Club Racer allows a total freedom in choosing the right components according to your usage.

Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strenghtened with flat arms.
this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.
Locked in trajectories and customizable.

Kit specifications:

•     Complete frame unassembled
•     Motors & Esc’s not included
•     Flight controller not included
•     Tx & Rx (Radio) not included
•     Camera & VTX (video transmitter) not included
•     Battery & charger not included

General specs of Club racer versions.

 

• Full carbon frame- Crash resistant.
• Innovative abutted A frame design.
• Minimised vibrations distribitution, Optimised shock absoption
• 3K 4mm Carbon
• Sandwitched frame plates

 

• Fully protected electronics
• Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
• Responsiveness- so rigid, that you feeel "At one" with your frame.

ESSENTIALS

•     Entirely designed for racing
•     Flat arms conception for highest impact resistance
•     Simplified option for easy components replacement
•     Low drag, for higher speeds
•     Electronics fully protected

KEY FACTORS

•     Premium choice for FPV
•     High wind resistance
•     Super fast

Anakin Club Racer Canopy

Anakin Club Racer FRAME SET

Anakin Club Racer FRONT ARM 215

Anakin Club Racer FRONT ARM 260

Sky-Hero Anakin Club Racer OP REVOLUTION

Anakin Club Racer POWER DISTRIBUTION BOARD

Anakin Club Racer REAR ARM 215 (2pc)

Anakin Club Racer REAR ARM 260 (2pc)

Anakin Club Racer SCREW SET

Sky-Hero Anakin Fastener screw set

Sky Hero Anakin Front Frame Spacer. These are the spacers installed in the front of the frame. Package includes four spacers.

Sky-hero Anakin Frame spacer rear (4pc)

Sky-hero Anakin Injected motor support (8pc)

Sky-hero Anakin Led (pair)

Sky-hero Anakin LED holder Z spacer (2pc)

Sky-hero Anakin Main frame down lower

Sky-hero Anakin Main frame up

 

Sky-hero Anakin O-ring (2pc)

Sky-hero Anakin O-ring (5pc)